Sergey A. Budnik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sergey A. Budnik has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Oleg M. Alifanov
Moscow Aviation Institute (National Research University)
7 shared publications - Aleksey V. Nenarokomov
Moscow Aviation Institute (National Research University), Moscow, Russia
3 shared publications - A. V. Nenarokomov
Moscow Aviation Institute (National Research University), Moscow, Russia
2 shared publications - A. V. Nenarokomov
Federal State Budgetary Educational Institution of Higher Education “Moscow Aviation Institute (National Research University)”, Moscow, Russia
2 shared publications A. V. Netelev
Moscow Aviation Institute (National Research University), Moscow, Russia
2 shared publicationsD. M. Titov
Federal State Budgetary Educational Institution of Higher Education “Moscow Aviation Institute (National Research University)”, Moscow, Russia
2 shared publications
Latest Publications
- Open Access
Design of Aerospace Vehicles’ Thermal Protection Based on Heat-Insulating Materials with Optimal Structure
Highly porous open-cell carbon materials have great potential for use as high-temperature thermal insulation for space vehicles due to a unique combination of properties: low density, high rigidity, sufficient compressive strength, and low thermal conductivity. The physical properties of these materials essentially depend on their microstructure. This implies the possibility of constructing a new advanced technique for the optimal design of multilayer thermal protection systems for aerospace vehicles, taking into account the dependence of materials’ thermal properties on microstructure. The formulation of the optimization problem traditional to thermal design implies the determination of the layer thicknesses that provide a minimum specific mass of the thermal protection, subject to the specified constraints on the maximum temperatures in the layers. The novelty of this work lies in the fact that, along with the thickness of the layers, the design parameters include the cell diameter and porosity, which characterize the structure of highly porous cellular materials. The innovative part of the presented paper lies in the determination of cell diameter and the porosity of open-cell carbon foam together with the thickness of the layers for multilayer thermal insulation, ensuring the required operational temperature on the boundaries of the layers and a minimum of the total mass of the system. This article reveals new possibilities for using the numerical optimization method to determine the geometric parameters of the thermal protection system and the morphology of the materials used. A new methodology for designing heat-loaded structures based on the simultaneous selection of macro- and micro-parameters of the system is proposed. The basic principles of constructing an algorithm for designing a multilayer thermal protection system are outlined, taking into account the possibility of choosing the parameters of the highly porous materials’ structure. The reliability of the developed optimization method was verified by comparing the results of mathematical modeling with experimental data obtained for highly porous cellular materials with known microstructure parameters.
Open AccessDesign of Aerospace Vehicles’ Thermal Protection Based on Heat-Insulating Materials with Optimal Structure
Highly porous open-cell carbon materials have great potential for use as high-temperature thermal insulation for space vehicles due to a unique combination of properties: low density, high rigidity, sufficient compressive strength, and low thermal conductivity. The physical properties of these materials essentially depend on their microstructure. This implies the possibility of constructing a new advanced technique for the optimal design of multilayer thermal protection systems for aerospace vehicles, taking into account the dependence of materials’ thermal properties on microstructure. The formulation of the optimization problem traditional to thermal design implies the determination of the layer thicknesses that provide a minimum specific mass of the thermal protection, subject to the specified constraints on the maximum temperatures in the layers. The novelty of this work lies in the fact that, along with the thickness of the layers, the design parameters include the cell diameter and porosity, which characterize the structure of highly porous cellular materials. The innovative part of the presented paper lies in the determination of cell diameter and the porosity of open-cell carbon foam together with the thickness of the layers for multilayer thermal insulation, ensuring the required operational temperature on the boundaries of the layers and a minimum of the total mass of the system. This article reveals new possibilities for using the numerical optimization method to determine the geometric parameters of the thermal protection system and the morphology of the materials used. A new methodology for designing heat-loaded structures based on the simultaneous selection of macro- and micro-parameters of the system is proposed. The basic principles of constructing an algorithm for designing a multilayer thermal protection system are outlined, taking into account the possibility of choosing the parameters of the highly porous materials’ structure. The reliability of the developed optimization method was verified by comparing the results of mathematical modeling with experimental data obtained for highly porous cellular materials with known microstructure parameters.
- 1 July 2021
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 94 (4) , 1052-1062
Thermophysical Characteristics of Fibrous Thermoprotective Materials at High Temperatures
- 1 July 2021
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 94 (4) , 1052-1062
Thermophysical Characteristics of Fibrous Thermoprotective Materials at High Temperatures
- Open Access
- 21 December 2019
- Published by Samara National Research University in VESTNIK of Samara University. Aerospace and Mechanical Engineering
- Vol. 18 (4) , 7-17
Experimental testing of heat flux sensors based on the inverse problem technique
In final adjustment of thermally-loaded elements of space structures information on thermal loads (heat fluxes and surface temperatures) for the whole period of flight in the atmosphere is of primary importance. The level of temperature and the processes taking place on the surface of the heat shield do not always allow using conventional methods of measuring thermal loads. In this case determining thermal loads by the results of measuring the temperature at several points of elements of the heat shield structure is an alternative to direct measurements. The aim of this work is to develop and test sensors for measuring heat loading of thermal-protective coating of modern descent vehicles, as well as to test the developed methods of carrying out thermo-physical tests. Heat flux sensors for indestructible composite fibrous materials with a high degree of non-uniformity are described in the paper.
- 21 December 2019
- Published by Samara National Research University in VESTNIK of Samara University. Aerospace and Mechanical Engineering
- Vol. 18 (4) , 7-17
Open AccessExperimental testing of heat flux sensors based on the inverse problem technique
In final adjustment of thermally-loaded elements of space structures information on thermal loads (heat fluxes and surface temperatures) for the whole period of flight in the atmosphere is of primary importance. The level of temperature and the processes taking place on the surface of the heat shield do not always allow using conventional methods of measuring thermal loads. In this case determining thermal loads by the results of measuring the temperature at several points of elements of the heat shield structure is an alternative to direct measurements. The aim of this work is to develop and test sensors for measuring heat loading of thermal-protective coating of modern descent vehicles, as well as to test the developed methods of carrying out thermo-physical tests. Heat flux sensors for indestructible composite fibrous materials with a high degree of non-uniformity are described in the paper.
- 1 January 2018
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 91 (1) , 26-39
Heat-Flux Sensors Integrated Into the Structure of Thermal Protection Coatings
- 1 January 2018
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 91 (1) , 26-39
Heat-Flux Sensors Integrated Into the Structure of Thermal Protection Coatings
- 6 March 2017
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 27 (3) , 598-614
Identification of radiative heat transfer parameters in multilayer thermal insulation of spacecraft
Purpose: The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties. Design/methodology/approach: The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI. Findings: A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates. Originality/value: An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.
- 6 March 2017
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 27 (3) , 598-614
Identification of radiative heat transfer parameters in multilayer thermal insulation of spacecraft
Purpose: The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties. Design/methodology/approach: The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI. Findings: A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates. Originality/value: An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.
- 30 January 2013
- Published by Elsevier in Acta Astronautica
- Vol. 85, 113-119
Destructive materials thermal characteristics determination with application for spacecraft structures testing
- 30 January 2013
- Published by Elsevier in Acta Astronautica
- Vol. 85, 113-119
Destructive materials thermal characteristics determination with application for spacecraft structures testing
- 14 May 2012
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 20 (5) , 677-690
Estimation of thermal properties of materials with application for inflatable spacecraft structure testing
The general method of iterative regularization is concerned with application to the estimation of material properties. The objective of this article is to estimate thermal and thermokinetic properties of advanced materials using the approach based on inverse methods. An experimental–computational system is presented for investigating the thermal and kinetics properties of composite materials by methods of inverse heat transfer problems and this is developed at the Thermal Laboratory of the Department of Space Systems Engineering, Moscow Aviation Institute. The system is aimed at investigating the materials in conditions of unsteady contact heating over a wide range of temperature changes and heating rates in vacuum, air and inert gas mediums.
- 14 May 2012
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 20 (5) , 677-690
Estimation of thermal properties of materials with application for inflatable spacecraft structure testing
The general method of iterative regularization is concerned with application to the estimation of material properties. The objective of this article is to estimate thermal and thermokinetic properties of advanced materials using the approach based on inverse methods. An experimental–computational system is presented for investigating the thermal and kinetics properties of composite materials by methods of inverse heat transfer problems and this is developed at the Thermal Laboratory of the Department of Space Systems Engineering, Moscow Aviation Institute. The system is aimed at investigating the materials in conditions of unsteady contact heating over a wide range of temperature changes and heating rates in vacuum, air and inert gas mediums.