Aleksey V. Nenarokomov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aleksey V. Nenarokomov has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
A. V. Netelev
Department of Space Systems and Rocket Engineering, Moscow Aviation Institute (National Research University), Moscow, Russia
3 shared publications- Oleg M. Alifanov
Moscow Aviation Institute (National Research University)
3 shared publications - Sergey A. Budnik
Federal State Budgetary Educational Institution of Higher Education “Moscow Aviation Institute (National Research University)”, Moscow, Russia
3 shared publications A. S. Okhapkin
Moscow Aviation Institute (National Research University), Moscow, Russia
2 shared publicationsA. V. Morzhukhina
Department of Space Systems and Rocket Engineering, Moscow Aviation Institute (National Research University), Moscow, Russia
2 shared publicationsD. L. Reviznikov
Department of Computational Mathematics and Programming, Moscow Aviation Institute (National Research University), Moscow, Russia
2 shared publications
Latest Publications
- 1 June 2024
- Published by Pleiades Publishing Ltd in Journal of Engineering Thermophysics
- Vol. 33 (2) , 384-396
Identifying Transport Properties of Gas from Measurements of Heat Flux at Stagnation Point of Blunt Body. Technique and Experimental Results
In their previous work [1], the authors presented a method of identifying the characteristics of a gaseous medium from measurements of the heat flux absorbed by the surface of a blunt body in a gas flow. The identification problem was stated in an extreme formulation: the sought-for transport properties of a gaseous medium were determined via minimization of the objective function of the estimated and measured heat fluxes absorbed by the surface of a solid body. For minimization of the objective function, the Nelder–Mead method was used in combination with random restarts; the results of testing the algorithm in a model experiment are given. This paper presents the technique of conduction of experiment to verify the method for identification of the gas flow parameters. Experimental results are given for two different gas flow sources.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Journal of Engineering Thermophysics
- Vol. 33 (2) , 384-396
Identifying Transport Properties of Gas from Measurements of Heat Flux at Stagnation Point of Blunt Body. Technique and Experimental Results
In their previous work [1], the authors presented a method of identifying the characteristics of a gaseous medium from measurements of the heat flux absorbed by the surface of a blunt body in a gas flow. The identification problem was stated in an extreme formulation: the sought-for transport properties of a gaseous medium were determined via minimization of the objective function of the estimated and measured heat fluxes absorbed by the surface of a solid body. For minimization of the objective function, the Nelder–Mead method was used in combination with random restarts; the results of testing the algorithm in a model experiment are given. This paper presents the technique of conduction of experiment to verify the method for identification of the gas flow parameters. Experimental results are given for two different gas flow sources.
- 1 July 2022
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 95 (4) , 1015-1025
Investigation of Thermophysical Properties of Gradient Materials by the Method of Inverse Problems
- 1 July 2022
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 95 (4) , 1015-1025
Investigation of Thermophysical Properties of Gradient Materials by the Method of Inverse Problems
- 21 June 2022
- Published by Pleiades Publishing Ltd in Journal of Engineering Thermophysics
- Vol. 31 (2) , 248-260
Identification of Gas Properties via Measurements of Absorbed Heat Flux
This paper considers the features of solving the problem identifying characteristics of a gaseous medium via measurements of the heat flux absorbed by the surface of a blunt body in a supersonic flow. Three groups of parameters are distinguished identification of which is feasible from known values of surface temperature and heat flux: thermodynamic properties of the gaseous medium, its transport properties and conditions on the outer boundary of the boundary layer. In this paper, the transport properties of the gaseous medium are considered as an object of identification. The study is carried out within the framework of the perfect gas model. The identification problem is formulated in the extremum setting. For optimization, the Nelder–Mead method is used in combination with random restarts. It is shown that owing to the specificity of the structure of a set of points the objective function value in which is lower than the value specified by the accuracy of the heat flux measurements, it is possible to obtain a fairly accurate estimate of the identified parameters.
- 21 June 2022
- Published by Pleiades Publishing Ltd in Journal of Engineering Thermophysics
- Vol. 31 (2) , 248-260
Identification of Gas Properties via Measurements of Absorbed Heat Flux
This paper considers the features of solving the problem identifying characteristics of a gaseous medium via measurements of the heat flux absorbed by the surface of a blunt body in a supersonic flow. Three groups of parameters are distinguished identification of which is feasible from known values of surface temperature and heat flux: thermodynamic properties of the gaseous medium, its transport properties and conditions on the outer boundary of the boundary layer. In this paper, the transport properties of the gaseous medium are considered as an object of identification. The study is carried out within the framework of the perfect gas model. The identification problem is formulated in the extremum setting. For optimization, the Nelder–Mead method is used in combination with random restarts. It is shown that owing to the specificity of the structure of a set of points the objective function value in which is lower than the value specified by the accuracy of the heat flux measurements, it is possible to obtain a fairly accurate estimate of the identified parameters.
- 1 July 2021
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 94 (4) , 1052-1062
Thermophysical Characteristics of Fibrous Thermoprotective Materials at High Temperatures
- 1 July 2021
- Published by Springer Nature in Journal of Engineering Physics and Thermophysics
- Vol. 94 (4) , 1052-1062
Thermophysical Characteristics of Fibrous Thermoprotective Materials at High Temperatures
- Open Access
- 1 June 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1047 (1) , 012011
Study of defects of elastic thermal protection by inverse methods of nonlinear acoustics
The purpose of this research was to develop an approved experimental technique for remote (non-contact) diagnostics of structural defects in elastic materials of thermal protection of inflatable re-entry vehicles [1]. The performance of equipment is based on nonlinear interaction of acoustic beam of finite amplitude in analyzed materials with structural defects. Such problems are of great practical importance in the study of properties of composite materials used as non-destructive elastic surface coating in objects of space technology, power engineering etc. The most promising direction in non-destructive diagnostics (research methods) for the elastic composite materials is to use the procedure of inverse problems [2-8]. Corresponded inverse problem is considered as minimization of least-squares residual functional for calculated and measured acoustic pressure at external surface of specimen. The minimization of the residual functional is executed by conjugate gradient method. Determination of spatial distribution of structural acoustic nonlinearity in the analysed specimen allows spotting the defects. In the paper the implementation of experimental technique for remote diagnostics of subsurface flaws in elastic materials is considered. Results of analysis of computational effectiveness of inverse problems algorithms are included in this paper. Experimental validation of the method is based on experimental testing of specimens with a-priori installed artificial defects.
- 1 June 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1047 (1) , 012011
Open AccessStudy of defects of elastic thermal protection by inverse methods of nonlinear acoustics
The purpose of this research was to develop an approved experimental technique for remote (non-contact) diagnostics of structural defects in elastic materials of thermal protection of inflatable re-entry vehicles [1]. The performance of equipment is based on nonlinear interaction of acoustic beam of finite amplitude in analyzed materials with structural defects. Such problems are of great practical importance in the study of properties of composite materials used as non-destructive elastic surface coating in objects of space technology, power engineering etc. The most promising direction in non-destructive diagnostics (research methods) for the elastic composite materials is to use the procedure of inverse problems [2-8]. Corresponded inverse problem is considered as minimization of least-squares residual functional for calculated and measured acoustic pressure at external surface of specimen. The minimization of the residual functional is executed by conjugate gradient method. Determination of spatial distribution of structural acoustic nonlinearity in the analysed specimen allows spotting the defects. In the paper the implementation of experimental technique for remote diagnostics of subsurface flaws in elastic materials is considered. Results of analysis of computational effectiveness of inverse problems algorithms are included in this paper. Experimental validation of the method is based on experimental testing of specimens with a-priori installed artificial defects.
- 2 May 2017
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 27 (5) , 1040-1055
Optimal design of multi-layer thermal protection of variable thickness
Purpose: The presented paper aims to consider algorithm for optimal design of multilayer thermal insulation.Design/methodology/approach: Developed algorithm is based on a sequential quadratic programming method.Findings: 2D mathematical model of heat transfer in thermal protection was considered in frame of thermal design of spacecraft. The sensitivity functions were used to estimate the Jacobean of the object functions.Research limitations/implications: Design of distributed parameter systems and shape optimization may be thought of as geometrical inverse problems, in which the positions of free boundaries are determined along with the spatial variables. In such problems, the missing data (i.e. the position of boundaries) are compensated for by the presence of the so-called inverse problem additional conditions. In the case under consideration, such conditions are constrains on the temperature values at the discrete points of the system.Practical implications: Results are presented how to apply the algorithm suggested for solving a practical problem – thickness sampling for a thermal protection system of advanced solar probe.Originality/value: The procedure proposed in the paper to solve a design problem is based on the method of quadratic approximation of the initial problem statement as a Lagrange formulation. This has allowed to construct a rather universal algorithm applicable without modification for solving a wide range of thermal design problems.
- 2 May 2017
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 27 (5) , 1040-1055
Optimal design of multi-layer thermal protection of variable thickness
Purpose: The presented paper aims to consider algorithm for optimal design of multilayer thermal insulation.Design/methodology/approach: Developed algorithm is based on a sequential quadratic programming method.Findings: 2D mathematical model of heat transfer in thermal protection was considered in frame of thermal design of spacecraft. The sensitivity functions were used to estimate the Jacobean of the object functions.Research limitations/implications: Design of distributed parameter systems and shape optimization may be thought of as geometrical inverse problems, in which the positions of free boundaries are determined along with the spatial variables. In such problems, the missing data (i.e. the position of boundaries) are compensated for by the presence of the so-called inverse problem additional conditions. In the case under consideration, such conditions are constrains on the temperature values at the discrete points of the system.Practical implications: Results are presented how to apply the algorithm suggested for solving a practical problem – thickness sampling for a thermal protection system of advanced solar probe.Originality/value: The procedure proposed in the paper to solve a design problem is based on the method of quadratic approximation of the initial problem statement as a Lagrange formulation. This has allowed to construct a rather universal algorithm applicable without modification for solving a wide range of thermal design problems.
- 6 March 2017
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 27 (3) , 598-614
Identification of radiative heat transfer parameters in multilayer thermal insulation of spacecraft
Purpose: The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties. Design/methodology/approach: The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI. Findings: A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates. Originality/value: An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.
- 6 March 2017
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 27 (3) , 598-614
Identification of radiative heat transfer parameters in multilayer thermal insulation of spacecraft
Purpose: The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties. Design/methodology/approach: The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI. Findings: A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates. Originality/value: An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.
- 30 January 2013
- Published by Elsevier in Acta Astronautica
- Vol. 85, 113-119
Destructive materials thermal characteristics determination with application for spacecraft structures testing
- 30 January 2013
- Published by Elsevier in Acta Astronautica
- Vol. 85, 113-119
Destructive materials thermal characteristics determination with application for spacecraft structures testing
- 1 January 2010
- Published by ASME International
- p. 947-957
Mathematical Model of Heat Transfer in High-Porous Materials
The main purpose of this study was to confirm operability and effectiveness of the complex methods developed for theoretical prediction and experimental-computational determining some properties of modern highly porous materials, used as thermal protection shields in objects of space engineering, power engineering, etc. Them concern Fibrous Materials (FM), Open-Cell Reticulated Foams (OCRF) etc. The basis for the method proposed is in the combination of Direct Mathematical Simulation (DMS) for global structure of the complex irregular systems, which have the property of local regularity and Inverse Heat Transfer Problem (IHTP) methods. This approach makes possible to obtain and to predict such properties as radiation and molecular thermal conductivities, energy accommodation coefficient, complex refractive index, scattering indicatrix, scattering and absorption factors, etc. Such problems are of great practical importance in the study of material properties.
- 1 January 2010
- Published by ASME International
- p. 947-957
Mathematical Model of Heat Transfer in High-Porous Materials
The main purpose of this study was to confirm operability and effectiveness of the complex methods developed for theoretical prediction and experimental-computational determining some properties of modern highly porous materials, used as thermal protection shields in objects of space engineering, power engineering, etc. Them concern Fibrous Materials (FM), Open-Cell Reticulated Foams (OCRF) etc. The basis for the method proposed is in the combination of Direct Mathematical Simulation (DMS) for global structure of the complex irregular systems, which have the property of local regularity and Inverse Heat Transfer Problem (IHTP) methods. This approach makes possible to obtain and to predict such properties as radiation and molecular thermal conductivities, energy accommodation coefficient, complex refractive index, scattering indicatrix, scattering and absorption factors, etc. Such problems are of great practical importance in the study of material properties.