LRLiutauras Ragulskis

Liutauras Ragulskis

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Liutauras Ragulskis has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    1D manipulator with vibration impact drive, based on which it is possible to create orthogonal manipulators and robots of any dimension

    by K. Ragulskis, L. Ragulskis

    Manipulator of the investigated type may move according to a straight line. It has an advantage in the fact that by choosing geometrical parameters of the manipulator it is possible to achieve its effective operation. This is presented by using analytical and graphical methods. The performed research shows that manipulators with vibration impact drives have some positive qualities. In their structure it is not necessary to include the self-stopping mechanism. In the conservative case of the system static position of equilibrium of the impact pair can be with negative, zero or positive tightening. In the case of zero tightening eigenfrequency and period of the system does not depend on the quantity of motion of impact excitation. In the case of harmonic forced excitation resonant motions take place in the vicinity of the eigenfrequency of the conservative system with zero tightening. Analytical – numerical calculations contribute to the creation of manipulators and robots with vibration impact drives.

  • Open Access

    Investigation of dynamics of the pipe robot with vibration drive based on centrifugal forces

    by Kazimieras Ragulskis, Arvydas Pauliukas, Petras Paškevičius, Bronislovas Spruogis, Arvydas Matuliauskas, Vygantas Mištinas, Igor Murovanyi, Liutauras-Mykolas Ragulskis

    Vibration drive based on centrifugal forces can be used as an exciter of vibrations in the structure of a pipe robot. In this paper, a pipe robot with vibration drive based on centrifugal forces is proposed and investigated. A dynamic model of the pipe robot is presented, and differential equations of motion are obtained. Model in which excitation is assumed to be of unlimited power is described and investigated as well. Typical graphical relationships for the investigated pipe robot with vibration drive based on centrifugal forces are obtained and presented. It is determined that the obtained results reproduce the main dynamic effects taking place during the motion of a pipe robot with vibration drive based on centrifugal forces.


  • Open Access

    Vibrator with two impacting pairs, one of them in the position of equilibrium

    by K. Ragulskis, L. Ragulskis

    In the dynamic processes taking place in manipulators and robots, impact interactions play an important role. Among them two sided impacts are important. In this paper investigation of dynamic regimes of a system with two impacting surfaces, one of which is in the position of equilibrium is performed. Dynamics in steady state regime for typical parameters of the investigated system having one degree of freedom is investigated. Displacements as functions of time as well as velocities as functions of time for various positions of the impacting surface are presented. Non symmetric impacts enable to reduce the dimensions of the vibrator and to achieve increase of effectiveness of useful impacts of a manipulator. Investigations of the conservative system as well as of the system with forced harmonic excitation are performed.


  • Open Access

    Vibration Drives with Two Impacting Pairs for Precise Robots

    by Kazimieras Ragulskis, Liutauras Ragulskis

    Such robots, when they consist of two separate sequentially connected robots, are of high precision. The first part – robot is not of a high precision adjusted to perform comparatively large displacements, while the second part – robot is meant to perform comparatively small displacements with very high precision if compared with the first part. Motors of all the motions are of vibrational type. First of all, vibrators of vibrational impact type with impacts of rigid bodies are investigated. Earlier it was shown that in some types of nonlinear systems between the hard and soft zones of excitation of vibrations optimal regimes according to the shape of motion exist. Here this fact is generalized for the vibrator with two symmetric impacting pairs of elements. According to the model of the system free vibrations of the system and their parameters are determined as well as forced harmonic vibrations and their specific features are determined. Recommendations for practical applications are provided.


  • Open Access

    Model of a pipe robot with limited interactions

    by K. Ragulskis, B. Spruogis, A. Matuliauskas, V. Mištinas, L. Ragulskis

    Nonlinear interactions between the exciting mass and the case of a pipe robot are important in order to prevent impacts of the exciting mass with the case of the pipe robot. Those impacts lead to deterioration of operation of a pipe robot and even may lead to destruction of some parts of the robot. Model for the analysis of dynamics of a pipe robot with limited interactions is proposed in this paper. For this purpose, a special expression of nonlinear stiffness is used. Results of investigations for various parameters of the system are presented.


  • Investigation of Soft Impacts in Elements of Pipe Robots

    by Kazimieras Ragulskis, Bronislovas Spruogis, Marijonas Bogdevičius, Arvydas Matuliauskas, Vygantas Mištinas, Liutauras Ragulskis

    Vibrators with deformable impact support under harmonic excitation are especially useful in the case when their stationary regimes of motion are stable. This is useful in practice by applying those vibrators to single direction manipulators and various robots of space type. For practical application it is necessary to reveal dynamical qualities of the system from where it would be possible to determine optimal regimes. For this purpose investigations of dynamics of the system by numerical methods were performed. Investigation of dynamics of impact interactions in elements of robots is an important engineering problem. Dynamics of soft impacts in elements of manipulators and robots is investigated. The model of the investigated system is described. Numerical investigations for various parameters of the system are performed. Free and forced vibrations are investigated. From the presented results it can be noted that for the smaller values of the coefficient of stiffness of the support period of steady state motion coincides with the period of the exciting force, while for the higher values of the coefficient of stiffness of the support period of steady state motion is equal to two periods of the exciting force. Thus it is concluded that with the increase of the coefficient of stiffness of the support behavior of the investigated vibro impact system with soft impacts experiences essential changes. Main characteristics of steady state motion as functions of frequency of excitation are investigated. From the presented results the minimum and maximum inter impact intervals as functions of frequency of excitation, minimum and maximum velocities before impact as functions of frequency of excitation, minimum and maximum minimum displacements in inter impact intervals as functions of frequency of excitation are seen. Three resonant zones of expected single valued motions are observed in the presented results. They correspond to optimal regions of operation of the vibro impact system with soft impacts. Results of the performed analysis of dynamic interactions with soft impacts in the elements of manipulators and robots are used in the process of design of pipe robots of advanced type.


  • Investigation of Dynamics of a Pipe Robot with Nonlinear Interactions of Its Elements

    by Kazimieras Ragulskis, Bronislovas Spruogis, Marijonas Bogdevičius, Arvydas Matuliauskas, Vygantas Mištinas, Liutauras Ragulskis

    Systems in which vibrational displacements are limited because elastic forces increase practically up to unlimited values, are investigated. Here systems having one degree of freedom are investigated in which vibrations have specific qualities for the case of conservative systems as well as for the case of forced harmonic excitations. Typical expressions for nonlinear stiffness are proposed. Model of a pipe robot with limited values of displacements is presented and investigated. The model has two degrees of freedom: the displacement of the vibrating mass inside the pipe robot and the displacement of the pipe robot itself. Motion of the pipe robot in the negative direction as well as motion of the pipe robot in the positive direction for different parameters of the system is observed. For high amplitude of excitation, the distance travelled by the pipe robot is much greater than for low amplitude of excitation. The obtained results are used in the process of design of pipe robots.


  • Motion of vibration manipulators with self stopping device in one direction with interactions of two non deformable elements in one direction

    by Kazimieras Ragulskis, Bronislovas Spruogis, Marijonas Bogdevičius, Arvydas Matuliauskas, Vygantas Mištinas, Liutauras Ragulskis

    Vibration manipulators are important in the process of creation of 1D – 3D manipulators and robots. The manipulator which is proposed here has the following advantages: simplicity of the structure and high coefficient of useful operation. This is because of the fact that the driving force provided by the vibration drive coincides with the direction of motion of the manipulator. Analysis of the regime of steady state motion is presented by using numerical methods. The obtained graphical relationships enable to choose the most effective parameters of the system in the process of design of vibration manipulators.


  • Open Access

    Improved numerical approximation of dry friction phenomena

    by K. Ragulskis, P. Paškevičius, A. Bubulis, A. Pauliukas, L. Ragulskis

    In the numerical investigation of vibration problems with dry friction it is accepted to use some type of approximation to this phenomenon. Often linear variation of the force of friction in a region around zero velocity is assumed. In this paper trigonometric variation is proposed and comparison of numerical results is performed. From the presented results higher precision of this approximation is observed.


  • Open Access

    Study of defectoscopy of partially biodegradable LDPE films

    by E. Kibirkštis, V. Miliūnas, K. Vaitasius, Asta Kabelkaitė Lukoševičė, A. Stepanenko, L. Ragulskis

    Physical characteristics of the loaded new developed partially biodegradable LDPE polymeric films (containing sorbit, molasses and chitosan additives) with defects and without have been investigated experimentally by using the method of projection moiré. The first eigenmodes are analysed, graphical results of their investigation are presented. It was determined that the shape of the first vibrations eigenmode and the characteristics of vibrations have changed when the polymeric film had a tear defect. The results obtained could be applied for the determination of characteristics and qualities of new developed LDPE polymeric films.