Jaime D. Bustos-Vanegas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jaime D. Bustos-Vanegas has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Fernanda Machado Baptestini
Universidade Federal do Espirito Santo
3 shared publications - Paulo Cesar Corrêa
Universidade Federal de Viçosa, Brazil
3 shared publications - Cristian F. Costa
Universidade Federal de Viçosa, Brazil
2 shared publications - Renata Cássia Campos
Universidade Federal de Viçosa, Brasil
2 shared publications - Afonso Mota Ramos
Universidade Federal de Viçosa
1 shared publication Fernanda M. Baptestini
Universidade Federal do Espírito Santo, Brasil
1 shared publication
Latest Publications
- Open Access
- 1 December 2018
- Published by FapUNIFESP (SciELO) in Engenharia Agrícola
- Vol. 38 (6) , 941-950
MOISTURE SORPTION ISOTHERMS OF QUINOA SEEDS: THERMODYNAMIC ANALYSIS
The present research aimed to study the water sorption behavior of quinoa seeds analyzing the hysteresis phenomenon and determining thermodynamic properties. Static gravimetric technique was used to obtain the equilibrium moisture content of quinoa seeds in different temperature conditions (15, 25, 35 e 50 °C) and relative humidity (between 11 and 96%). Equilibrium moisture content data were adjusted by eight mathematical models and the Modified Halsey model was the best one to describe the water sorption phenomena of quinoa seeds. Hygroscopic equilibrium moisture content of quinoa seeds is directly proportional to the water activity and decreases with increasing temperature. The hysteresis phenomena were observed throughout the range of water activity, showing more evident at low temperatures. Integral isosteric heat and differential entropy decreased with the increase of equilibrium moisture content. Gibbs free energy decreased with the increase of temperature and equilibrium moisture content. Compensation enthalpy-entropy theory was confirmed and the sorption mechanism is controlled by enthalpy.
- 1 December 2018
- Published by FapUNIFESP (SciELO) in Engenharia Agrícola
- Vol. 38 (6) , 941-950
Open AccessMOISTURE SORPTION ISOTHERMS OF QUINOA SEEDS: THERMODYNAMIC ANALYSIS
The present research aimed to study the water sorption behavior of quinoa seeds analyzing the hysteresis phenomenon and determining thermodynamic properties. Static gravimetric technique was used to obtain the equilibrium moisture content of quinoa seeds in different temperature conditions (15, 25, 35 e 50 °C) and relative humidity (between 11 and 96%). Equilibrium moisture content data were adjusted by eight mathematical models and the Modified Halsey model was the best one to describe the water sorption phenomena of quinoa seeds. Hygroscopic equilibrium moisture content of quinoa seeds is directly proportional to the water activity and decreases with increasing temperature. The hysteresis phenomena were observed throughout the range of water activity, showing more evident at low temperatures. Integral isosteric heat and differential entropy decreased with the increase of equilibrium moisture content. Gibbs free energy decreased with the increase of temperature and equilibrium moisture content. Compensation enthalpy-entropy theory was confirmed and the sorption mechanism is controlled by enthalpy.
- Open Access
- 1 August 2017
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 21 (8) , 556-561
Kinetics of water sorption of damaged bean grains: Thermodynamic properties
This study aims to determine the thermodynamic properties of damaged beans. Grains with initial moisture content of 53.85% (d.b.) were used. A part of the grains was used to obtain the desorption isotherms, while another part was subjected to drying until a moisture content of 5.26% (d.b.) was achieved; therefore, it was subjected to the adsorption process. To induce damage, a Stein breakage tester was used. To obtain the equilibrium moisture content, grains were placed in a climatic chamber whose temperatures were 20, 30, 40, and 50 ± 1 °C combined with a relative humidity of 30, 40, 50, 70, and 90 ± 3%. Although in the desorption process, damaged grains had a lower differential enthalpy compared with the control, the reverse behavior was observed in the adsorption process. Mechanical damage caused the formation of a greater number of available adsorption sites, resulting in higher differential entropy values in adsorption and lower values in desorption compared with the control. The mechanical damage had no effect on the Gibbs free energy.
- 1 August 2017
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 21 (8) , 556-561
Open AccessKinetics of water sorption of damaged bean grains: Thermodynamic properties
This study aims to determine the thermodynamic properties of damaged beans. Grains with initial moisture content of 53.85% (d.b.) were used. A part of the grains was used to obtain the desorption isotherms, while another part was subjected to drying until a moisture content of 5.26% (d.b.) was achieved; therefore, it was subjected to the adsorption process. To induce damage, a Stein breakage tester was used. To obtain the equilibrium moisture content, grains were placed in a climatic chamber whose temperatures were 20, 30, 40, and 50 ± 1 °C combined with a relative humidity of 30, 40, 50, 70, and 90 ± 3%. Although in the desorption process, damaged grains had a lower differential enthalpy compared with the control, the reverse behavior was observed in the adsorption process. Mechanical damage caused the formation of a greater number of available adsorption sites, resulting in higher differential entropy values in adsorption and lower values in desorption compared with the control. The mechanical damage had no effect on the Gibbs free energy.
- Open Access
- 1 October 2016
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 20 (10) , 930-935
Bean grain hysteresis with induced mechanical damage
This study aimed to evaluate the effect of mechanical damage on the hysteresis of beans with induced mechanical damage under different conditions of temperature and relative humidity. Beans (Phaseolus vulgaris L.) harvested manually with 35% water content (w.b.) were used. Part of this product was subjected to induced mechanical damage by Stein Breakage Tester and controlled drying (damaged and control sample), for sorption processes. The sorption isotherms of water were analyzed for different temperature conditions: 20, 30, 40 and 50 oC; and relative humidity: 0.3; 0.4; 0.5; 0.7 and 0.9 (decimal). Equilibrium moisture content data were correlated with six mathematical models, and the Modified Oswin model was the one that best fitted to the experimental data. According to the above mentioned isotherms, it was possible to observe the phenomenon of hysteresis of damaged and control samples, and this phenomenon was more pronounced in control ones.
- 1 October 2016
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 20 (10) , 930-935
Open AccessBean grain hysteresis with induced mechanical damage
This study aimed to evaluate the effect of mechanical damage on the hysteresis of beans with induced mechanical damage under different conditions of temperature and relative humidity. Beans (Phaseolus vulgaris L.) harvested manually with 35% water content (w.b.) were used. Part of this product was subjected to induced mechanical damage by Stein Breakage Tester and controlled drying (damaged and control sample), for sorption processes. The sorption isotherms of water were analyzed for different temperature conditions: 20, 30, 40 and 50 oC; and relative humidity: 0.3; 0.4; 0.5; 0.7 and 0.9 (decimal). Equilibrium moisture content data were correlated with six mathematical models, and the Modified Oswin model was the one that best fitted to the experimental data. According to the above mentioned isotherms, it was possible to observe the phenomenon of hysteresis of damaged and control samples, and this phenomenon was more pronounced in control ones.
- Open Access
- 1 December 2015
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 19 (12) , 1203-1208
Modelagem matemática da secagem de espuma de graviola
Objetivou-se, com este trabalho, propor e ajustar modelos matemáticos ao processo de secagem de espuma de graviola em diferentes condições de ar, determinar o coeficiente de difusão efetivo e obter a energia de ativação. Para a formação da espuma foi adicionada, à polpa, albumina, na concentração de 7,43% em massa e submetida à agitação em batedeira doméstica, durante 15 min; em seguida, esta foi espalhada sobre bandejas formando uma camada fina de cerca de 5,0 mm de espessura cujas condições de secagem foram: de 40, 50, 60, 70 e 80 °C, 5,6 m s-1 e 60%. O modelo para determinar o binômio teor de água crítico e tempo crítico e o de Midili se ajustaram bem aos dados experimentais da secagem de espuma de graviola e se obteve acréscimo no coeficiente de difusão efetiva com a elevação da temperatura de secagem e energia de ativação de 33,10 kJ mol-1.
- 1 December 2015
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 19 (12) , 1203-1208
Open AccessModelagem matemática da secagem de espuma de graviola
Objetivou-se, com este trabalho, propor e ajustar modelos matemáticos ao processo de secagem de espuma de graviola em diferentes condições de ar, determinar o coeficiente de difusão efetivo e obter a energia de ativação. Para a formação da espuma foi adicionada, à polpa, albumina, na concentração de 7,43% em massa e submetida à agitação em batedeira doméstica, durante 15 min; em seguida, esta foi espalhada sobre bandejas formando uma camada fina de cerca de 5,0 mm de espessura cujas condições de secagem foram: de 40, 50, 60, 70 e 80 °C, 5,6 m s-1 e 60%. O modelo para determinar o binômio teor de água crítico e tempo crítico e o de Midili se ajustaram bem aos dados experimentais da secagem de espuma de graviola e se obteve acréscimo no coeficiente de difusão efetiva com a elevação da temperatura de secagem e energia de ativação de 33,10 kJ mol-1.