Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dmitriy Sergeevich Nikitin has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhanced Dehydrogenation Properties of MgH2 with Delaminated Ti3C2Tx MXene Produced by Simple Wet Method

    by Yichen Sun, Roman Elman, Dmitriy Krotkevich, Ekaterina Podrezova, Dmitriy Nikitin, Carlos Rambo, Nahum Travitzky, Egor Kashkarov

    Magnesium hydride (MgH2) is a promising hydrogen storage material due to its high hydrogen capacity. However, pure MgH2 demonstrates high dehydrogenation temperature and slow reaction kinetics. To overcome these limitations, in this study, delaminated Ti3C2Tx MXene was incorporated into MgH2 using a simple wet mixing process in order to improve dehydrogenation performance. It was found that increasing the MXene content from 1 to 6 wt.% decreased the onset dehydrogenation temperature of the MgH2-Ti3C2Tx composite from 242 to 218 °C, which is significantly lower than that for pure MgH2 (325 °C). The activation energy for hydrogen desorption decreased from 145 kJ/mol for materials containing 1 wt.% Ti3C2Tx to 67–70 kJ/mol for materials containing 3 or 6 wt.%, which is lower than the values reported for ball-milled MXene-MgH2 composites. The wet mixing process preserves the layered structure of MXene and offers a potentially scalable approach for industrial hydrogen storage applications.

  • Plasma Dynamic Synthesis Productivity of Dispersed Iron Oxides in Single-Pulse Operation Mode

    by I. I. Shanenkov, A. A. Sivkov, A. I. Tsimmerman, A. Nassyrbayev, D. S. Nikitin, I. S. Zhumabaev, Yu. L. Shanenkova

    The development of materials for shielding, absorption, and interference suppression is an urgent practical challenge for ensuring the electromagnetic compatibility of devices. Iron-containing compounds are among the most promising radar absorbing materials. This paper studies a plasma dynamic synthesis method for producing dispersed iron oxides. The efficiency of an electrophysical setup based on a coaxial magnetoplasma accelerator with steel electrodes is examined, depending on the process energy parameters and the gaseous environment of the reactor chamber. The most promising experimental conditions for converting the electrical erosion material into an oxide product are achieved with an energy storage voltage of 2.5 kV and a capacitor bank capacitance of 14.4 mF. Other optimization ways for increasing the performance of the developed laboratory setup are also demonstrated.

  • Open Access

    Production of copper powders and metal-matrix composites with copper matrix in arc discharge plasma

    by D.S. Nikitin, I.I. Shanenkov, A.R. Nassyrbayev, Yul.L. Shanenkova, A.A. Sivkov

    Relevance. Copper metal matrix composites are widely used in advanced engineering applications involving extreme mechanical loads and increased heat flows. They are particularly important in the electronics industry, where they are used as substrates for discrete power components and heat sinks. These materials can effectively dissipate heat from electronic components, which is important given the predicted growth in local heat flows in high-performance devices and their miniaturization. Aim. To synthesize copper powders and metal matrix composites with a copper matrix with arc discharge plasma, for use in the subsequent manufacture of bulk products that have enhanced mechanical and thermophysical properties. Objects. Copper powders, tungsten carbide powders, and metal matrix composites with a copper matrix reinforced with tungsten carbide, as well as bulk products made from these powders. Methods. Plasma dynamic synthesis, spark plasma sintering, X-ray diffractometry (XRD analysis), scanning electron microscopy, transmission electron microscopy, indentation (microhardness measurement), laser flash method (thermal conductivity measurement). Results. The plasma dynamic method was used to synthesize powders of copper, nanodispersed tungsten carbide and metal matrix composites based on them. Two fundamental approaches were proposed: ex situ, which is based on the separate production of copper (Cu) and carbides, followed by their mixing; and in situ, which involves the joint production and combination of the matrix and carbides. The authors obtained the dispersed metal matrix composites with a carbide content of 10% and a bimodal particle size distribution ranging from tens of nanometres to hundreds of micrometres. This enabled high-density composite products to be obtained with a relative density of up to 95% and a uniform distribution of the ceramic component in the matrix during sintering. The manufactured composite materials demonstrated significant potential in terms of both their mechanical and thermophysical properties. The bulk products exhibited increased hardness (73–92 HV), combined with satisfactory thermophysical characteristics (λ up to 169 W/m·K). These results may be valuable in developing modern materials capable of operating under extreme mechanical and thermal conditions, a serious problem currently facing the electronics industry.


  • Plasma dynamic synthesis of hybrid carbide-reinforced aluminium matrix composites

    by Dmitriy Nikitin, Ivan Shanenkov, Artur Nassyrbayev, Alexander Tsimmerman, Yuliya Shanenkova, Egor Kashkarov, Junzhi Li, Wei Han

  • Open Access

    Nanoscale Nickel–Chromium Powder as a Catalyst in Reducing the Temperature of Hydrogen Desorption from Magnesium Hydride

    by Alan Kenzhiyev, Viktor N. Kudiiarov, Alena A. Spiridonova, Daria V. Terenteva, Dmitrii B. Vrublevskii, Leonid A. Svyatkin, Dmitriy S. Nikitin, Egor B. Kashkarov

    The composite material MgH2-EEWNi-Cr (20 wt. %) with a hydrogen content of 5.2 ± 0.1 wt.% is characterized by improved hydrogen interaction properties compared to the original MgH2. The dissociation of the material occurs in three temperature ranges (86–117, 152–162, and 281–351 °C), associated with a complex of effects consisting of changes in the specific surface area of the material, alterations in the crystal lattice during ball milling, and changes in the electronic structure in the presence of a Ni–Cr catalyst, based on first-principles calculations. The decrease in desorption activation energy (Ed = 65–96 ± 1 kJ/mol, ΔEd = 59–90 kJ/mol) is due to the catalytic effect of N–Cr, leading to a faster decomposition of the hydride phase. Based on the results of ab initio calculations, Ni–Cr on the MgH2 surface leads to a significant decrease in hydrogen binding energy (ΔEb = 60%) compared to pure magnesium hydride due to the formation of Ni–H and Cr–H covalent bonds, which reduces the degree of H–Mg ionic bonding. The results obtained allow us to expand our understanding of the mechanisms of hydrogen interaction with storage materials and the possibility of using these as mobile hydrogen storage and transportation materials.

  • Open Access

    Nanoscale Nickel-Chromium Powder as a Catalyst in Reducing the Temperature of Hydrogen Desorption from Magnesium Hydride

    by Alan Kenzhiyev, Viktor N. Kudiiarov, Alena A. Spiridonova, Daria V. Terenteva, Dmitrii B. Vrublevskii, Leonid A. Svyatkin, Dmitrii S. Nikitin, Egor B. Kashkarov

    The composite material MgH₂-EEWNi-Cr (20 wt. %) with a hydrogen content of 5.2 ± 0.1 wt. % is characterized by improved hydrogen interaction properties compared to the original MgH₂. The dissociation of the material occurs in three temperature ranges (86-117, 152-162, 281-351 °C), associated with a complex of effects consisting of changes in the specific surface area of the material, alterations in the crystal lattice during ball milling, and changes in the electronic structure in the presence of a Ni-Cr catalyst, based on first-principles calculations. The decrease in desorption activation energy (Ed = 65-96 ± 1 kJ/mol, ΔEd = 59-90 kJ/mol) is due to the catalytic effect of Ni-Cr, leading to a faster decomposition of the hydride phase. Based on the results of ABINIT calculations, Ni-Cr on the MgH₂ surface leads to a significant decrease in hydrogen binding energy (ΔEb = 60%) compared to pure magnesium hydride due to the formation of Ni–H and Cr–H covalent bonds, which reduces the degree of H–Mg ionic bonding. The results obtained allow us to expand our understanding of the mechanisms of hydrogen interaction with storage materials and the possibility of using these as mobile hydrogen storage and transportation materials.

  • IEC 61850 Digital Communication Protocols

    by Vasily Ya. Ushakov, Ikromjon U. Rakhmonov, Alisher B. Askarov, Dmitriy S. Nikitin


  • Digitalization of Electric Power Grid Within IEC 61850 Standard

    by Vasily Ya. Ushakov, Ikromjon U. Rakhmonov, Alisher B. Askarov, Dmitriy S. Nikitin


  • Digital Substations as a Key Element of Smart Grids

    by Vasily Ya. Ushakov, Ikromjon U. Rakhmonov, Alisher B. Askarov, Dmitriy S. Nikitin

  • The Smart Electric Grid

    by Vasily Ya. Ushakov, Ikromjon U. Rakhmonov, Alisher B. Askarov, Dmitriy S. Nikitin