Shyamal Das
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shyamal Das has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Anirban Dhar
Fiber Optics & Photonics Division CSIR‐Central Glass & Ceramic Research Institute Kolkata India
6 shared publications - Mukul Chandra Paul
Central Glass and Ceramic Research Institute
5 shared publications - Alexander V. Kir’yAnov
Centro de Investigaciones en Óptica
3 shared publications - Atasi Pal
Fiber Optics & Photonics Division, CSIR-Central Glass & Ceramic Research Institute, Kolkata-700032, India
3 shared publications - Mrinmay Pal
Fibre Optics Lab, Central Glass & Ceramic Research Institute, Kolkata, West Bengal India 700032
2 shared publications - Ranjan Sen
Fibre Optics, Central Glass & Ceramic Research Institute, Kolkata, West Bengal India
2 shared publications
Latest Publications
- Open Access
- 23 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 11 (5) , 1-8
Soliton Molecules in Self-Mode-Locked Ring-Cavity Er/Yb Double-Clad Fiber Laser
In this paper, generation of soliton molecules by a self-mode-locked Er/Yb double clad fiber laser is experimentally demonstrated. The optical spectrum of the bound solitons exhibits eight well defined peaks at ~1563 nm with high modulation depth. The corresponding autocorrelation measurement shows a fundamental trace with several narrow peaks, suggesting the presence of bound solitons. The obtained results demonstrate the reliability of our simple laser configuration for the formation of more robust soliton molecules as the pump power is increased. The soliton molecules exhibit repetition rate of 19.54 MHz and average power of 1.2 W, achieved with a pump power of ~4.8 W.
- 23 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 11 (5) , 1-8
Open AccessSoliton Molecules in Self-Mode-Locked Ring-Cavity Er/Yb Double-Clad Fiber Laser
In this paper, generation of soliton molecules by a self-mode-locked Er/Yb double clad fiber laser is experimentally demonstrated. The optical spectrum of the bound solitons exhibits eight well defined peaks at ~1563 nm with high modulation depth. The corresponding autocorrelation measurement shows a fundamental trace with several narrow peaks, suggesting the presence of bound solitons. The obtained results demonstrate the reliability of our simple laser configuration for the formation of more robust soliton molecules as the pump power is increased. The soliton molecules exhibit repetition rate of 19.54 MHz and average power of 1.2 W, achieved with a pump power of ~4.8 W.
- Open Access
Phase-Separated Alumina–Silica Glass-Based Erbium-Doped Fibers for Optical Amplifier: Material and Optical Characterization along with Amplification Properties
In this paper, we present phase-separated alumina–silica glass-based Er3+-doped optical fibers made by a modified chemical vapor deposition (MCVD) process in combination with a solution doping (SD) technique. The fibers exhibited better optical performance than other silica-based host glasses—both in terms of spectral broadening and flattening of the gain spectra in the C band (1530–1560 nm) region—as well as an improved lifetime. These phase-separated erbium-doped fibers (EDF) promoted longer Er–O bond lengths and also hexa- and penta-coordinated Al3+ ions instead of the fourfold coordination found in non-phase-separated EDF. It was observed that the higher coordination numbers of Er3+ and Al3+ ions in phase-separated glass hosts led to more homogeneous and inhomogeneous broadening, resulting in better flatness of the gain spectrum with 1.2 dB more gain compared to the non-phase-separated EDF.
Open AccessPhase-Separated Alumina–Silica Glass-Based Erbium-Doped Fibers for Optical Amplifier: Material and Optical Characterization along with Amplification Properties
In this paper, we present phase-separated alumina–silica glass-based Er3+-doped optical fibers made by a modified chemical vapor deposition (MCVD) process in combination with a solution doping (SD) technique. The fibers exhibited better optical performance than other silica-based host glasses—both in terms of spectral broadening and flattening of the gain spectra in the C band (1530–1560 nm) region—as well as an improved lifetime. These phase-separated erbium-doped fibers (EDF) promoted longer Er–O bond lengths and also hexa- and penta-coordinated Al3+ ions instead of the fourfold coordination found in non-phase-separated EDF. It was observed that the higher coordination numbers of Er3+ and Al3+ ions in phase-separated glass hosts led to more homogeneous and inhomogeneous broadening, resulting in better flatness of the gain spectrum with 1.2 dB more gain compared to the non-phase-separated EDF.
- 13 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 52 (7) , 1-12
Basic and Peculiar Properties of Chromium–Magnesium Co-Doped YAS-Based Optical Fibers
The basic and peculiar properties of new-type chromium (Cr) and magnesium (Mg) co-doped yttrio–alumino–silicate-based optical fibers, fabricated through the classic modified chemical vapor deposition method employed in conjunction with solution-doping technique, are addressed, with most of attention being paid to impact of Cr/Mg co-doping strength. The electron probe microanalysis, Raman, optical absorption, and fluorescence [at excitation at different wavelengths, spanning visible to near-infrared (NIR)] spectra’ measurements are performed for clarifying overall state-of-the-art of the fibers. Their most remarkable features are demonstrated to be pronounceable fluorescence in NIR (beyond 1 $\mu \text{m}$ ) and as well pronounceable bleaching effect under the action of 1- $\mu \text{m}$ light, both adherent to the presence of Cr 4+ ions.
- 13 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 52 (7) , 1-12
Basic and Peculiar Properties of Chromium–Magnesium Co-Doped YAS-Based Optical Fibers
The basic and peculiar properties of new-type chromium (Cr) and magnesium (Mg) co-doped yttrio–alumino–silicate-based optical fibers, fabricated through the classic modified chemical vapor deposition method employed in conjunction with solution-doping technique, are addressed, with most of attention being paid to impact of Cr/Mg co-doping strength. The electron probe microanalysis, Raman, optical absorption, and fluorescence [at excitation at different wavelengths, spanning visible to near-infrared (NIR)] spectra’ measurements are performed for clarifying overall state-of-the-art of the fibers. Their most remarkable features are demonstrated to be pronounceable fluorescence in NIR (beyond 1 $\mu \text{m}$ ) and as well pronounceable bleaching effect under the action of 1- $\mu \text{m}$ light, both adherent to the presence of Cr 4+ ions.
- Open Access
- 5 January 2015
- Published by VSB - Technical University of Ostrava in Advances in Electrical and Electronic Engineering
- Vol. 12 (6) , 582 - 589-589
Tm-Yb Doped Optical Fiber Performance with Variation of Host-Glass Composition
Tm-Yb Doped Optical Fiber Performance with Variation of Host-Glass Composition
- 5 January 2015
- Published by VSB - Technical University of Ostrava in Advances in Electrical and Electronic Engineering
- Vol. 12 (6) , 582 - 589-589
Open AccessTm-Yb Doped Optical Fiber Performance with Variation of Host-Glass Composition
Tm-Yb Doped Optical Fiber Performance with Variation of Host-Glass Composition
- 4 February 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 20 (5) , 132-137
Thulium Bismuth Co-Doped Fiber Lasers at 1901 nm by 802 nm Pumping
We demonstrate an efficient fiber laser operating at 1901.6 nm using a new Thulium Bismuth co-doped fiber (TBF) under 802 nm pumping. The TBF was fabricated using modified chemical vapor deposition process associated with optimized solution doping techniques. The TBF lasers at 1901.6 nm are obtained at a noticeably low threshold pump power of 75–92 mW using two fiber Bragg gratings in a Fabry–Perot cavity. The highest efficiency of 42.2% is achieved using a 0.4 m long TBF fiber with a core dopant concentrations (in wt%) of 0.35 Bi $_{2}$ O $_{3}$ , 0.9 Tm $_{2}$ O $_{3}$ , 3.0 Al $_{2}$ O $_{3}$ and 4.0 GeO $_{2}$ . Compared to the laser from a commercially available Thulium-doped fiber, the proposed laser has a significantly higher efficiency and lower threshold pump power. This is attributed to the incorporation of Bi ions in the gain medium which helps to increase the ${}^{3}$ F $_{4}$ population through energy transfer processes. The maximum output power of 52.7 mW is achieved at the pump power of 195 mW.- 4 February 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 20 (5) , 132-137
Thulium Bismuth Co-Doped Fiber Lasers at 1901 nm by 802 nm Pumping
We demonstrate an efficient fiber laser operating at 1901.6 nm using a new Thulium Bismuth co-doped fiber (TBF) under 802 nm pumping. The TBF was fabricated using modified chemical vapor deposition process associated with optimized solution doping techniques. The TBF lasers at 1901.6 nm are obtained at a noticeably low threshold pump power of 75–92 mW using two fiber Bragg gratings in a Fabry–Perot cavity. The highest efficiency of 42.2% is achieved using a 0.4 m long TBF fiber with a core dopant concentrations (in wt%) of 0.35 Bi $_{2}$ O $_{3}$ , 0.9 Tm $_{2}$ O $_{3}$ , 3.0 Al $_{2}$ O $_{3}$ and 4.0 GeO $_{2}$ . Compared to the laser from a commercially available Thulium-doped fiber, the proposed laser has a significantly higher efficiency and lower threshold pump power. This is attributed to the incorporation of Bi ions in the gain medium which helps to increase the ${}^{3}$ F $_{4}$ population through energy transfer processes. The maximum output power of 52.7 mW is achieved at the pump power of 195 mW.- 27 December 2013
- Published by Wiley in Physica Status Solidi (a)
- Vol. 211 (4) , 828-834
Study of incorporation efficiency of different precursor salts in fabrication of rare‐earth doped optical fibers
- 27 December 2013
- Published by Wiley in Physica Status Solidi (a)
- Vol. 211 (4) , 828-834
Study of incorporation efficiency of different precursor salts in fabrication of rare‐earth doped optical fibers
- 18 November 2010
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 27 (12) , 2714-2720
Energy-transfer parameters in a Tm/Yb doped single mode silica fiber
Energy-transfer parameters in a thulium-ytterbium doped single mode silica fiber have been determined quantitatively for the first time, to our knowledge. The principal energy-transfer parameters, estimated from spectroscopic measurements and on the basis of a migration-assisted energy-transfer model, lead to design and optimization of the thulium-ytterbium doped fiber lasers and amplifiers. Linear dependence of the energy-transfer probability on the product of co-dopant concentrations proves the accuracy of the implementation of the migration-assisted energy-transfer model. It has been found that the step-wise energy-transfer process as well as emission at wavelength ranges of 475, 800, and 2000 nm with pumping at 980 nm is strongly guided by the level of ytterbium concentration with respect to thulium. Thus the proportion has been optimized on the basis of emission at the mentioned wavelength ranges, and an amplified spontaneous emission experiment performed at 2000 nm shows good agreement with the optimization result.
- 18 November 2010
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 27 (12) , 2714-2720
Energy-transfer parameters in a Tm/Yb doped single mode silica fiber
Energy-transfer parameters in a thulium-ytterbium doped single mode silica fiber have been determined quantitatively for the first time, to our knowledge. The principal energy-transfer parameters, estimated from spectroscopic measurements and on the basis of a migration-assisted energy-transfer model, lead to design and optimization of the thulium-ytterbium doped fiber lasers and amplifiers. Linear dependence of the energy-transfer probability on the product of co-dopant concentrations proves the accuracy of the implementation of the migration-assisted energy-transfer model. It has been found that the step-wise energy-transfer process as well as emission at wavelength ranges of 475, 800, and 2000 nm with pumping at 980 nm is strongly guided by the level of ytterbium concentration with respect to thulium. Thus the proportion has been optimized on the basis of emission at the mentioned wavelength ranges, and an amplified spontaneous emission experiment performed at 2000 nm shows good agreement with the optimization result.