KAKazuya Aizawa

Kazuya Aizawa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kazuya Aizawa has a total of 151 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Orientation mapping of YbSn3 single crystals based on Bragg-dip analysis using a delay-line superconducting sensor

    by Hiroaki Shishido, The Dang Vu, Kazuya Aizawa, Kenji M. Kojima, Tomio Koyama, Kenichi Oikawa, Masahide Harada, Takayuki Oku, Kazuhiko Soyama, Shigeyuki Miyajima, et al.

    Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. A delay-line current-biased kinetic inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal resolution and multi-hit capability. Here, it is demonstrated that a delay-line CB-KID with a 10B neutron conversion layer can be applied to high-spatial-resolution neutron transmission imaging and spectroscopy up to 100 eV. Dip structures are observed in the transmission spectra of YbSn3 single crystals, induced by Bragg diffraction and nuclear resonance absorption. The orientation mapping of YbSn3 crystals is successfully performed via the analysis of observed Bragg-dip positions in the transmission spectra.


  • High Spatial Resolution Neutron Transmission Imaging Using a Superconducting Two-Dimensional Detector

    by Hiroaki Shishido, Kazuma Nishimura, The Dang Vu, Kazuya Aizawa, Kenji M. Kojima, Tomio Koyama, Kenichi Oikawa, Masahide Harada, Takayuki Oku, Kazuhiko Soyama, et al.

    Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method for the pulsed neutron source. We obtained the neutron transmission images of a Gd–Al alloy sample, inside which single crystals of GdAl $_3$ were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al–Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the $^{155}$ Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 $\mu$ m × 12 $\mu$ m. Gd selective imaging was performed using the resonance dip of $^{155}$ Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm.


  • Open Access

    Kink Deformation Dynamics of LPSO Alloy in the Experimental View Point of Multilayer Structure Deformation

    by Kazuya Aizawa

    We discuss a dynamics of kink deformation for Mg-based LPSO alloy, using neutron diffraction data and AE data. We treat the kink deformation of LPSO alloy as an example for multilayer structure deformation with large deflection, namely kink structure, chevron structure, etc. and try to characterize its dynamics features.

  • Open Access

    Tensile Strengthening of a Mg Alloy Containing 25-vol% LPSO by Hot Extrusion Revealed by Neutron Diffraction

    by Stefanus Harjo, Kazuya Aizawa, Takuro Kawasaki, Wu Gong

    Interesting mechanical properties changes were found in Mg97Zn1Y2 alloy containing about 25-vol% long-period stacking ordered phase (LPSO) in the HCP structured a matrix (aMg), by hot-extrusion. In situ neutron diffraction measurements during tensile loading were conducted on three Mg97Zn1Y2 alloys with different processes: as-casted, and after hot-extrusion at 623 K with extrusion

  • Effect of gauge volume on strain measurement in rock materials using time-of-flight neutron diffraction

    by Jun Abe, Kotaro Sekine, Stefanus Harjo, Takuro Kawasaki, Kazuya Aizawa


  • Stroboscopic time-of-flight neutron diffraction during cyclic testing using the event data recording system at J-PARC

    by Takuro Kawasaki, Yasuhiro Inamura, Takayoshi Ito, Takeshi Nakatani, Stefanus Harjo, Wu Gong, Kazuya Aizawa

    A time-resolved time-of-flight neutron diffraction technique to characterize the structural properties of materials during cyclic tests has been developed for the neutron diffractometers at J-PARC. Using this technique, diffracted neutrons and the applied cyclic conditions are recorded as event data together with time information. The amplitude and phase of the conditions of all recorded neutron signals can be specified by using the characteristics of the event data. By adopting the developed technique, the behaviors of the crystal lattice and domains of the piezoelectric material in a multilayer-type piezoelectric actuator driven by a cyclic electric field were evaluated. The developed technique enabled the collection and processing of diffraction data for all levels of the applied electric field, as opposed to only the highest and lowest levels. The variation in diffraction intensity during the application of a cyclic electric field was obtained successfully, and the hysteresis-like behaviors of both the lattice strain and the 90° domain switching were revealed.


  • Open Access

    High stereographic resolution texture and residual stress evaluation using time-of-flight neutron diffraction

    by Pingguang Xu, Stefanus Harjo, Mayumi Ojima, Hiroshi Suzuki, Takayoshi Ito, Wu Gong, Sven C. Vogel, Junya Inoue, Yo Tomota, Kazuya Aizawa, et al.

    Neutron diffraction texture measurements provide bulk averaged textures with excellent grain orientation statistics, even for large-grained materials, owing to the probed volume being of the order of 1 cm3. Furthermore, crystallographic parameters and other valuable microstructure information such as phase fraction, coherent crystallite size, root-mean-square microstrain, macroscopic or intergranular strain and stress, etc. can be derived from neutron diffractograms. A procedure for combined high stereographic resolution texture and residual stress evaluation was established on the pulsed-neutron-source-based engineering materials diffractometer TAKUMI at the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Research Center, through division of the neutron detector panel regions. Pole figure evaluation of a limestone standard sample with a well known texture suggested that the precision obtained for texture measurement is comparable to that of the established neutron beamlines utilized for texture measurement, such as the HIPPO diffractometer at the Los Alamos Neutron Science Center (New Mexico, USA) and the D20 angle-dispersive neutron diffractometer at the Institut Laue–Langevin (Grenoble, France). A high-strength martensite–austenite multilayered steel was employed for further verification of the reliability of simultaneous Rietveld analysis of multiphase textures and macro stress tensors. By using a texture-weighted geometric mean micromechanical (BulkPathGEO) model, a macro stress tensor analysis with a plane stress assumption showed a rolling direction–transverse direction (RD–TD) in-plane compressive stress (about −330 MPa) in the martensite layers and an RD–TD in-plane tensile stress (about 320 MPa) in the austenite layers. The phase stress partitioning was ascribed mainly to the additive effect of the volume expansion during martensite transformation and the linear contraction misfit between austenite layers and newly transformed martensite layers during the water quenching process.


  • Open Access

    Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex II: Neutron Scattering Instruments

    by Kenji Nakajima, Yukinobu Kawakita, Shinichi Itoh, Jun Abe, Kazuya Aizawa, Hiroyuki Aoki, Hitoshi Endo, Masaki Fujita, Kenichi Funakoshi, Wu Gong, et al.

    The neutron instruments suite, installed at the spallation neutron source of the Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex (J-PARC), is reviewed. MLF has 23 neutron beam ports and 21 instruments are in operation for user programs or are under commissioning. A unique and challenging instrumental suite in MLF has been realized via combination of a high-performance neutron source, optimized for neutron scattering, and unique instruments using cutting-edge technologies. All instruments are/will serve in world-leading investigations in a broad range of fields, from fundamental physics to industrial applications. In this review, overviews, characteristic features, and typical applications of the individual instruments are mentioned.


  • Open Access

    Materials and Life Science Experimental Facility at the Japan Proton Accelerator Research Complex III: Neutron Devices and Computational and Sample Environments

    by Kaoru Sakasai, Setsuo Satoh, Tomohiro Seya, Tatsuya Nakamura, Kentaro Toh, Hideshi Yamagishi, Kazuhiko Soyama, Dai Yamazaki, Ryuji Maruyama, Takayuki Oku, et al.

    Neutron devices such as neutron detectors, optical devices including supermirror devices and 3He neutron spin filters, and choppers are successfully developed and installed at the Materials Life Science Facility (MLF) of the Japan Proton Accelerator Research Complex (J-PARC), Tokai, Japan. Four software components of MLF computational environment, instrument control, data acquisition, data analysis, and a database, have been developed and equipped at MLF. MLF also provides a wide variety of sample environment options including high and low temperatures, high magnetic fields, and high pressures. This paper describes the current status of neutron devices, computational and sample environments at MLF.