Mohammed El Gibari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammed El Gibari has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Hongwu Li
12 shared publications- Jamal Zbitou
Abdelmalek Essaadi University
7 shared publications Afshin S. Daryoush
Department of ECE, Drexel University 2 , Philadelphia, Pennsylvania 19104, USA
6 shared publications- Fouad Aytouna
Abdelmalek Essaadi University
6 shared publications - Stephane Ginestar
Nantes Université
6 shared publications Massinissa Hadjloum
Facult des Sciences et Techniques, IETR, Lunam Universit, Universit de Nantes, 2 Chemin de la Houssinire, BP 92208, 44322 cedex 3, France
5 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (5) , 4014-4025
A compact flat antenna array based on Wilkinson power divider for radar applications
This paper presents the design, simulation, and achievement of an optimized 64-element antenna array based on Wilkinson power divider operating at 24 GHz. The whole circuit is mounted on a Rogers RO4830 substrate with a thickness of 0.127 mm, copper cladding thickness of 0.018 mm, dielectric constant of 3.24, and a loss tangent of 0.0033. Using advanced design system (ADS) from Keysight, the combiner is meticulously simulated to achieve efficient power combination with minimal insertion loss, excellent impedance matching, and high port-to-port isolation. The design ensures that power from multiple input ports is effectively combined into a single output port, suitable for high-frequency applications. Simulation results at 24 GHz confirm optimal performance, and validation corroborates the accuracy of the ADS-based simulations. The proposed design demonstrates reliability and efficiency for integration into modern communication radar systems operating at millimeter-wave frequencies.
- 1 October 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (5) , 4014-4025
Open AccessA compact flat antenna array based on Wilkinson power divider for radar applications
This paper presents the design, simulation, and achievement of an optimized 64-element antenna array based on Wilkinson power divider operating at 24 GHz. The whole circuit is mounted on a Rogers RO4830 substrate with a thickness of 0.127 mm, copper cladding thickness of 0.018 mm, dielectric constant of 3.24, and a loss tangent of 0.0033. Using advanced design system (ADS) from Keysight, the combiner is meticulously simulated to achieve efficient power combination with minimal insertion loss, excellent impedance matching, and high port-to-port isolation. The design ensures that power from multiple input ports is effectively combined into a single output port, suitable for high-frequency applications. Simulation results at 24 GHz confirm optimal performance, and validation corroborates the accuracy of the ADS-based simulations. The proposed design demonstrates reliability and efficiency for integration into modern communication radar systems operating at millimeter-wave frequencies.
- 30 September 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (19) , 195316
A compact and highly-selective coplanar bandpass filter for ISM band applications
This research outlines the development of a compact and highly selective coplanar bandpass filter designed specifically for applications within the ISM band. The filter utilizes coplanar waveguide technology and is fabricated on a Rogers RT/duroid 5880 substrate, which has a thickness of 1.02mm, a dielectric constant of 2.2, and a minimal loss tangent of 0.0009. The design achieves a return loss exceeding 15 dB and an insertion loss of approximately 1.5dB, centered at a frequency of 2.5 GHz, with an operational bandwidth that spans from 2.29GHz to 2.68 GHz, yielding a total of 390MHz. Electromagnetic simulations performed using two different numerical techniques validate the low passband insertion loss and robust out-of-band rejection. To confirm these findings experimentally, a prototype was constructed, and its S-parameters were measured, revealing a strong correlation with the simulation results. The filter has a compact size of 19.7 ×22.05 mm 2 , making it ideal for use in wireless communication and radio frequency signal processing systems. Notably, the 2.4 GHz ISM band is widely utilized in various practical applications, including microwave ovens, Wi-Fi routers, and Bluetooth devices.
- 30 September 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (19) , 195316
A compact and highly-selective coplanar bandpass filter for ISM band applications
This research outlines the development of a compact and highly selective coplanar bandpass filter designed specifically for applications within the ISM band. The filter utilizes coplanar waveguide technology and is fabricated on a Rogers RT/duroid 5880 substrate, which has a thickness of 1.02mm, a dielectric constant of 2.2, and a minimal loss tangent of 0.0009. The design achieves a return loss exceeding 15 dB and an insertion loss of approximately 1.5dB, centered at a frequency of 2.5 GHz, with an operational bandwidth that spans from 2.29GHz to 2.68 GHz, yielding a total of 390MHz. Electromagnetic simulations performed using two different numerical techniques validate the low passband insertion loss and robust out-of-band rejection. To confirm these findings experimentally, a prototype was constructed, and its S-parameters were measured, revealing a strong correlation with the simulation results. The filter has a compact size of 19.7 ×22.05 mm 2 , making it ideal for use in wireless communication and radio frequency signal processing systems. Notably, the 2.4 GHz ISM band is widely utilized in various practical applications, including microwave ovens, Wi-Fi routers, and Bluetooth devices.
- Open Access
- 1 September 2026
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 21 (09) , P09030
Design and development of multi-section coupled-line couplers with reconfigurable capacitance for high-frequency operating at 24 GHz
This article presents a comparative study of three coupled-line couplers (CLC) designed to operate at a high frequency of 24 GHz, along with an investigation of a reconfigurable CLC. The couplers differ in the number of sections: the first CLC has one section, the second has two sections, and the third has three sections. The latter will be transformed into a reconfigurable coupler by adding capacitors at transmission line terminals. The performance of each design is evaluated according to key criteria, including reflection ( S 11 ), transmission ( S 12 ), coupling ( S 13 ), isolation ( S 14 ) and phase response. The simulation results showed that the single-section coupler provides moderate performance, with rather weak coupling, while the two-section coupler shows significant improvement, especially in coupling, which prompted us to add the third section, which gave the best performance, better improvement and good results on all S-parameters. Good isolation ( S 14 = -34.3 dB), reflection ( S 11 = -34 dB), transmission ( S 12 = -2.95 dB), coupling ( S 13 = -3.22 dB) and the phase difference between S 12 and S 13 is 90 deg, outperforming all previous single- and two-section configurations, which prompted us to develop this three-section CLC and make it adjustable over a wider range, so that it can be suitable for many applications. Simulations were performed using an Electromagnetic Solver (EM) based on Finite Integration Technique and advanced design system (ADS) solver based on Moments Method to evaluate the coupler behavior.
- 1 September 2026
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 21 (09) , P09030
Open AccessDesign and development of multi-section coupled-line couplers with reconfigurable capacitance for high-frequency operating at 24 GHz
This article presents a comparative study of three coupled-line couplers (CLC) designed to operate at a high frequency of 24 GHz, along with an investigation of a reconfigurable CLC. The couplers differ in the number of sections: the first CLC has one section, the second has two sections, and the third has three sections. The latter will be transformed into a reconfigurable coupler by adding capacitors at transmission line terminals. The performance of each design is evaluated according to key criteria, including reflection ( S 11 ), transmission ( S 12 ), coupling ( S 13 ), isolation ( S 14 ) and phase response. The simulation results showed that the single-section coupler provides moderate performance, with rather weak coupling, while the two-section coupler shows significant improvement, especially in coupling, which prompted us to add the third section, which gave the best performance, better improvement and good results on all S-parameters. Good isolation ( S 14 = -34.3 dB), reflection ( S 11 = -34 dB), transmission ( S 12 = -2.95 dB), coupling ( S 13 = -3.22 dB) and the phase difference between S 12 and S 13 is 90 deg, outperforming all previous single- and two-section configurations, which prompted us to develop this three-section CLC and make it adjustable over a wider range, so that it can be suitable for many applications. Simulations were performed using an Electromagnetic Solver (EM) based on Finite Integration Technique and advanced design system (ADS) solver based on Moments Method to evaluate the coupler behavior.
- Open Access
- 1 August 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (4) , 3047-3057
A new compact printed ring bandpass filter structure for ISM band applications
We introduce a novel, compact bandpass filter (BPF) that employs Ring coupling through a microstrip design. This filter features a ring resonator that mainly relies on capacitive coupling to achieve its resonant characteristic. The results from experimental fabrication confirmed the expected performance of the filter, showing strong agreement between the simulated and measured S-parameters. The filter is built on a RO4003C substrate that is 1.52 mm thick, with a dielectric constant of 3.38 and a loss tangent of 0.0027. Designed for a center frequency of 5.72 GHz and a bandwidth of 930 MHz, it exhibits low insertion loss and effective signal rejection, as supported by advanced electromagnetic simulations. This flexible and efficient filter design represents a significant step forward, offering great potential for innovative communication systems and wireless power transmission, especially when integrated with 5.8 GHz straight-through antenna arrays for wireless energy harvesting.
- 1 August 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (4) , 3047-3057
Open AccessA new compact printed ring bandpass filter structure for ISM band applications
We introduce a novel, compact bandpass filter (BPF) that employs Ring coupling through a microstrip design. This filter features a ring resonator that mainly relies on capacitive coupling to achieve its resonant characteristic. The results from experimental fabrication confirmed the expected performance of the filter, showing strong agreement between the simulated and measured S-parameters. The filter is built on a RO4003C substrate that is 1.52 mm thick, with a dielectric constant of 3.38 and a loss tangent of 0.0027. Designed for a center frequency of 5.72 GHz and a bandwidth of 930 MHz, it exhibits low insertion loss and effective signal rejection, as supported by advanced electromagnetic simulations. This flexible and efficient filter design represents a significant step forward, offering great potential for innovative communication systems and wireless power transmission, especially when integrated with 5.8 GHz straight-through antenna arrays for wireless energy harvesting.
- 1 July 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (13) , 135335
A novel compact microstrip structure of a reconfigurable coupled-line bandpass filter based on varactor diode agility
This work presents a reconfigurability study of a compact coupled-line bandpass filter (CL-BPF) through four successive design stages. The baseline CL-BPF, designed on a Rogers RT/duroid-5880 substrate, demonstrates excellent initial performance with a return loss ( S 11 ) of −25 dB and an insertion loss ( S 12 ) of −0.1 dB at the resonance frequency f 0 = 5.80 GHz , and a bandwidth of 800 MHz. Building upon this reference structure, a first reconfigurable stage was introduced by integrating four lumped capacitors, enabling a tuning window from 6.30 to 6.75 GHz for capacitances ranging between 0.7 and 1.5 pF, with a bandwidth varying between 100 and 300 MHz. The second configuration, which employs six capacitors, expands the tuning capability from 6.27 to 6.85 GHz as the capacitance varies from 0.5 to 1.5 pF, while maintaining a passband bandwidth from 130 to 320 MHz at each capacitance setting. Due to its superior tunability, the six-capacitor architecture was selected as the foundation for full electrical reconfigurability. In the final stage, the capacitors were replaced with SMV1405 varactor diodes whose capacitance range aligns well with the values of the passive design and a simplified biasing network was implemented. Two dedicated biasing networks are employed to control the varactor diodes, while both networks are supplied by a single DC voltage source. By adjusting the control voltage from 1 to 29 V, the proposed reconfigurable filter exhibits smooth and continuous frequency tuning from 6.65 to 7.40 GHz, while maintaining a nearly constant passband bandwidth ranging from 280 to 300 MHz across all tuning states. The design was validated through simulations performed in both solvers: an electromagnetic solver based on the finite integration technique and the advanced design system 2026 using the method of moments, where the excellent correlation between the results confirms the robustness and reliability of the proposed approach.
- 1 July 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (13) , 135335
A novel compact microstrip structure of a reconfigurable coupled-line bandpass filter based on varactor diode agility
This work presents a reconfigurability study of a compact coupled-line bandpass filter (CL-BPF) through four successive design stages. The baseline CL-BPF, designed on a Rogers RT/duroid-5880 substrate, demonstrates excellent initial performance with a return loss ( S 11 ) of −25 dB and an insertion loss ( S 12 ) of −0.1 dB at the resonance frequency f 0 = 5.80 GHz , and a bandwidth of 800 MHz. Building upon this reference structure, a first reconfigurable stage was introduced by integrating four lumped capacitors, enabling a tuning window from 6.30 to 6.75 GHz for capacitances ranging between 0.7 and 1.5 pF, with a bandwidth varying between 100 and 300 MHz. The second configuration, which employs six capacitors, expands the tuning capability from 6.27 to 6.85 GHz as the capacitance varies from 0.5 to 1.5 pF, while maintaining a passband bandwidth from 130 to 320 MHz at each capacitance setting. Due to its superior tunability, the six-capacitor architecture was selected as the foundation for full electrical reconfigurability. In the final stage, the capacitors were replaced with SMV1405 varactor diodes whose capacitance range aligns well with the values of the passive design and a simplified biasing network was implemented. Two dedicated biasing networks are employed to control the varactor diodes, while both networks are supplied by a single DC voltage source. By adjusting the control voltage from 1 to 29 V, the proposed reconfigurable filter exhibits smooth and continuous frequency tuning from 6.65 to 7.40 GHz, while maintaining a nearly constant passband bandwidth ranging from 280 to 300 MHz across all tuning states. The design was validated through simulations performed in both solvers: an electromagnetic solver based on the finite integration technique and the advanced design system 2026 using the method of moments, where the excellent correlation between the results confirms the robustness and reliability of the proposed approach.
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. PP (00189480) , 1-11
A New Analytical Dispersion Model for a Wideband Meshed Microstrip Transmission Lines
The design of meshed, transparent, and lightweight microwave components has attracted growing interest due to their reduced mass, flexibility, and optical functionality. Among these structures, meshed microstrip transmission lines play a central role, as they form the fundamental building blocks of many radio frequency (RF) systems. However, accurately modeling their electromagnetic behavior remains challenging, as classical microstrip formulations developed for solid conductors fail to capture the effects introduced by periodic openings. This article proposes a new analytical model that extends Jansen’s dispersive formulation by incorporating a modified static permittivity that accounts for the mesh geometry through the fill factor. A frequency-dependent correction term is further introduced to capture the enhanced dispersion produced by the periodic openings at high frequencies. The resulting formulation provides a wideband prediction of the effective permittivity up to 40GHz without relying on full-wave simulations. Comparisons with extracted data based on 3-D full-wave electromagnetic simulations show excellent agreement across several transparency levels, with average errors below 0.5% for transparencies up to 85%. Validation across different substrate materials shows that the mean relative error remains below 2.5% for relative permittivities in the range $2.2 \leq \varepsilon _{r} \leq 9$ . The proposed closed-form 1-D model offers a fast, physics-based approach to designing transparent RF components and provides a reliable alternative to full-wave methods, significantly reducing design time in early meshed-conductor development and paving the way for integration into antennas, filters, and emerging optoelectronic devices.
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. PP (00189480) , 1-11
A New Analytical Dispersion Model for a Wideband Meshed Microstrip Transmission Lines
The design of meshed, transparent, and lightweight microwave components has attracted growing interest due to their reduced mass, flexibility, and optical functionality. Among these structures, meshed microstrip transmission lines play a central role, as they form the fundamental building blocks of many radio frequency (RF) systems. However, accurately modeling their electromagnetic behavior remains challenging, as classical microstrip formulations developed for solid conductors fail to capture the effects introduced by periodic openings. This article proposes a new analytical model that extends Jansen’s dispersive formulation by incorporating a modified static permittivity that accounts for the mesh geometry through the fill factor. A frequency-dependent correction term is further introduced to capture the enhanced dispersion produced by the periodic openings at high frequencies. The resulting formulation provides a wideband prediction of the effective permittivity up to 40GHz without relying on full-wave simulations. Comparisons with extracted data based on 3-D full-wave electromagnetic simulations show excellent agreement across several transparency levels, with average errors below 0.5% for transparencies up to 85%. Validation across different substrate materials shows that the mean relative error remains below 2.5% for relative permittivities in the range $2.2 \leq \varepsilon _{r} \leq 9$ . The proposed closed-form 1-D model offers a fast, physics-based approach to designing transparent RF components and provides a reliable alternative to full-wave methods, significantly reducing design time in early meshed-conductor development and paving the way for integration into antennas, filters, and emerging optoelectronic devices.
- Open Access
Design and Voltage-Controlled Reconfigurability of an Interdigital Bandpass Filter
This paper presents the design of a highly reconfigurable interdigital bandpass filter (BPF) developed through a three-stage design approach. In the first stage, the influence of four low-loss dielectric substrates on the filter response is systematically analyzed to identify the optimal configuration. The selected substrate demonstrates excellent performance, achieving an input return loss of −38 dB, an insertion loss of −0.9 dB at 4.30 GHz, and a wide passband corresponding to a bandwidth (BW) of 2.20 GHz. In the second stage, two variable capacitors were incorporated into the baseline geometry, enabling manual tuning of the center frequency () from 5.10 to 6.34 GHz, with better than −25 dB and close to −0.60 dB. In the final stage, the capacitors were replaced by SMV1413 varactor diodes, transforming the design into a fully voltage-controlled tunable filter. This configuration provides continuous frequency agility from 4.70 to 5 GHz without modifying the physical structure, while achieving levels down to −40 dB and insertion loss as low as −0.7 dB. The proposed architecture offers a compact, low-loss, and electrically reconfigurable solution, making it a promising solution for next-generation RF front-ends, adaptive wireless systems, and cognitive radio applications. Two independent Electromagnetic solvers (EM) were employed to validate the filter’s performance: an EM based on the Finite Integration Technique and the Advanced Design System 2026 (ADS) solver using the Method of Moments (MoM). The close agreement between the results produced by both platforms confirms the accuracy and robustness of the proposed reconfigurable bandpass filter structure.Open AccessDesign and Voltage-Controlled Reconfigurability of an Interdigital Bandpass Filter
This paper presents the design of a highly reconfigurable interdigital bandpass filter (BPF) developed through a three-stage design approach. In the first stage, the influence of four low-loss dielectric substrates on the filter response is systematically analyzed to identify the optimal configuration. The selected substrate demonstrates excellent performance, achieving an input return loss of −38 dB, an insertion loss of −0.9 dB at 4.30 GHz, and a wide passband corresponding to a bandwidth (BW) of 2.20 GHz. In the second stage, two variable capacitors were incorporated into the baseline geometry, enabling manual tuning of the center frequency () from 5.10 to 6.34 GHz, with better than −25 dB and close to −0.60 dB. In the final stage, the capacitors were replaced by SMV1413 varactor diodes, transforming the design into a fully voltage-controlled tunable filter. This configuration provides continuous frequency agility from 4.70 to 5 GHz without modifying the physical structure, while achieving levels down to −40 dB and insertion loss as low as −0.7 dB. The proposed architecture offers a compact, low-loss, and electrically reconfigurable solution, making it a promising solution for next-generation RF front-ends, adaptive wireless systems, and cognitive radio applications. Two independent Electromagnetic solvers (EM) were employed to validate the filter’s performance: an EM based on the Finite Integration Technique and the Advanced Design System 2026 (ADS) solver using the Method of Moments (MoM). The close agreement between the results produced by both platforms confirms the accuracy and robustness of the proposed reconfigurable bandpass filter structure. - Open Access
- 1 February 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (1) , 209-218
Design and fabrication of a novel millimeter-wave bandstop filter using transversal signal interference technique
This paper presents the design, simulation, and fabrication of a miniaturized millimeter-wave band-stop filter (BSF) on microstrip technology. The proposed arrangement is based on the concept of transversal interference of signals, and is realized as a pair of parallel transmission lines with the appropriate characteristic impedance and electrical length. Such scheme provides sharpening signal discrimination without resonator structures additional to the filter. The filter is fabricated on a ROGERS RT/Duroid 5880 substrate, selected for its favorable properties at high frequencies, including a thickness of 0.13 mm, a relative dielectric constant of 2.2, and a loss tangent of 0.0009. The optimized design was validated through electromagnetic simulations by two types of electromagnetic solvers, and then fabricated and measured by coplanar waveguide (CPW) probe to confirm its practical performance.
- 1 February 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (1) , 209-218
Open AccessDesign and fabrication of a novel millimeter-wave bandstop filter using transversal signal interference technique
This paper presents the design, simulation, and fabrication of a miniaturized millimeter-wave band-stop filter (BSF) on microstrip technology. The proposed arrangement is based on the concept of transversal interference of signals, and is realized as a pair of parallel transmission lines with the appropriate characteristic impedance and electrical length. Such scheme provides sharpening signal discrimination without resonator structures additional to the filter. The filter is fabricated on a ROGERS RT/Duroid 5880 substrate, selected for its favorable properties at high frequencies, including a thickness of 0.13 mm, a relative dielectric constant of 2.2, and a loss tangent of 0.0009. The optimized design was validated through electromagnetic simulations by two types of electromagnetic solvers, and then fabricated and measured by coplanar waveguide (CPW) probe to confirm its practical performance.
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Design of a Compact and Highly Selective Coplanar Bandpass Filter for ISM Band Applications
This paper proposes a compact and highly selective coplanar waveguide bandpass filter (BPF) optimized for ISM band applications around 2.4 GHz. The filter is based on coplanar waveguide (CPW) technology and is constructed on Rogers RT/duroid 5880 substrate, which has a thickness of 0.51 mm, a dielectric constant of 2.2, and a loss tangent of 0.0009. The filter demonstrates return and insertion losses of $\mathbf{2 4 ~ d B}$ and $\mathbf{1. 0 5}$ dB, respectively, with a center frequency near 2.4 GHz and an operating bandwidth ranging from 2.18 GHz to 2.64 GHz, resulting in a bandwidth of $\mathbf{4 6 0 ~ M H z}$. The design was simulated using two electromagnetic solvers based on different physical principles, both showing low insertion loss across the passband and strong signal rejection outside it. The overall size of the filter is $19.7 \times 22.05 \mathrm{~mm}^{2}$, making it a promising option for wireless communication and radio frequency signal processing applications. Notably, the 2.4 GHz ISM band is widely used, appearing in devices such as microwave ovens, Wi-Fi routers, and Bluetooth gadgets.- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Design of a Compact and Highly Selective Coplanar Bandpass Filter for ISM Band Applications
This paper proposes a compact and highly selective coplanar waveguide bandpass filter (BPF) optimized for ISM band applications around 2.4 GHz. The filter is based on coplanar waveguide (CPW) technology and is constructed on Rogers RT/duroid 5880 substrate, which has a thickness of 0.51 mm, a dielectric constant of 2.2, and a loss tangent of 0.0009. The filter demonstrates return and insertion losses of $\mathbf{2 4 ~ d B}$ and $\mathbf{1. 0 5}$ dB, respectively, with a center frequency near 2.4 GHz and an operating bandwidth ranging from 2.18 GHz to 2.64 GHz, resulting in a bandwidth of $\mathbf{4 6 0 ~ M H z}$. The design was simulated using two electromagnetic solvers based on different physical principles, both showing low insertion loss across the passband and strong signal rejection outside it. The overall size of the filter is $19.7 \times 22.05 \mathrm{~mm}^{2}$, making it a promising option for wireless communication and radio frequency signal processing applications. Notably, the 2.4 GHz ISM band is widely used, appearing in devices such as microwave ovens, Wi-Fi routers, and Bluetooth gadgets.