Halil Ibrahim Sahin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Halil Ibrahim Sahin has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Cengiz Güler
DÜZCE ÜNİVERSİTESİ, ORMAN FAKÜLTESİ, ORMAN ENDÜSTRİSİ MÜHENDİSLİĞİ BÖLÜMÜ
1 shared publication Fatih Baştar
Directorate of Western Black Sea Forestry Research Institute, BOLU, Turkey
1 shared publicationMesut Yalcin
Duzce University Faculty of Forestry Forest Products Engineering Department
1 shared publication- Mesut Yalçin
Düzce Üniversitesi, Orman Fakültesi
1 shared publication - Nurbanu Yaglica1 shared publication
Latest Publications
- 1 January 2026
- Published by BioResources in BioResources
- Vol. 21 (3)
Determination of some physical and mechanical properties of Uludağ fir wood (Abies nordmanniana subsp. bornmuelleriana) grown in different site classes
Physical, mechanical, and quality characteristics of Uludağ fir (Abies nordmanniana subsp. bornmuelleriana) wood, which occurs naturally in Turkey, were determined. The effect of site classes (SCs) on these characteristics was investigated. Uludağ fir trees growing naturally in the Şerif Yüksel Forest Management District and belonging to different site classes (I, II, and III) were considered. The physical and mechanical properties of the test samples were determined in accordance with relevant standards, and differences between SCs were evaluated using statistical methods. SCs were found to have a statistically significant effect on the physical and mechanical properties of Uludağ fir wood (p<0.05). The highest performance in terms of physical and mechanical properties was generally observed in samples from Class II. Static quality (SQ) values ranged from 9.52 to 10.9, while dynamic quality (DQ) values ranged from 1.77 to 1.98. Based on DQ values, samples from all quality classes fell into the group of wood exhibiting high elastic properties; based on SQ values, they were classified as high-quality wood. The findings highlight the impact of SCs on the quality characteristics of Uludağ fir wood, providing important scientific data for quality-focused raw material selection, sustainable forest management, and the planning of wood usage areas.
- 1 January 2026
- Published by BioResources in BioResources
- Vol. 21 (3)
Determination of some physical and mechanical properties of Uludağ fir wood (Abies nordmanniana subsp. bornmuelleriana) grown in different site classes
Physical, mechanical, and quality characteristics of Uludağ fir (Abies nordmanniana subsp. bornmuelleriana) wood, which occurs naturally in Turkey, were determined. The effect of site classes (SCs) on these characteristics was investigated. Uludağ fir trees growing naturally in the Şerif Yüksel Forest Management District and belonging to different site classes (I, II, and III) were considered. The physical and mechanical properties of the test samples were determined in accordance with relevant standards, and differences between SCs were evaluated using statistical methods. SCs were found to have a statistically significant effect on the physical and mechanical properties of Uludağ fir wood (p<0.05). The highest performance in terms of physical and mechanical properties was generally observed in samples from Class II. Static quality (SQ) values ranged from 9.52 to 10.9, while dynamic quality (DQ) values ranged from 1.77 to 1.98. Based on DQ values, samples from all quality classes fell into the group of wood exhibiting high elastic properties; based on SQ values, they were classified as high-quality wood. The findings highlight the impact of SCs on the quality characteristics of Uludağ fir wood, providing important scientific data for quality-focused raw material selection, sustainable forest management, and the planning of wood usage areas.
- 27 August 2020
- Published by BioResources in BioResources
- Vol. 15 (4) , 7780-7795
The potential of using forest waste as a raw material in particleboard manufacturing
Wood particles and a mixture of forest waste were investigated as raw material for the particleboard industry. Urea formaldehyde resin was used as the adhesive in the production of the particleboards. Some chemical (pH, dilute alkali solubility, hot and cold water solubility), physical (density, moisture, thickness swelling, and water absorption), mechanical (modulus of rupture, modulus of elasticity, internal bond strength, and screw holding strength) properties, as well as the contact angle values of the resulting particleboards were determined. Due to its needle litter and cone content, the forest waste exhibited a lower pH value and a higher content of extractive material than wood. Increasing the addition of forest waste led to significant reductions in the physical and mechanical properties of the particleboards. The addition of forest waste reduced the internal bond strength the most (56.6%), whereas the least reduction (15.7%) was in the value of screw holding strength perpendicular to the surface. The values of all panels except panel type F exceeded the minimum modulus of elasticity (1600 N mm-2) required for furniture production according to the EN 312-P2 standard. Results of the analyses showed that forest waste (10% and 20%) is a suitable renewable raw material source for panel production.
- 27 August 2020
- Published by BioResources in BioResources
- Vol. 15 (4) , 7780-7795
The potential of using forest waste as a raw material in particleboard manufacturing
Wood particles and a mixture of forest waste were investigated as raw material for the particleboard industry. Urea formaldehyde resin was used as the adhesive in the production of the particleboards. Some chemical (pH, dilute alkali solubility, hot and cold water solubility), physical (density, moisture, thickness swelling, and water absorption), mechanical (modulus of rupture, modulus of elasticity, internal bond strength, and screw holding strength) properties, as well as the contact angle values of the resulting particleboards were determined. Due to its needle litter and cone content, the forest waste exhibited a lower pH value and a higher content of extractive material than wood. Increasing the addition of forest waste led to significant reductions in the physical and mechanical properties of the particleboards. The addition of forest waste reduced the internal bond strength the most (56.6%), whereas the least reduction (15.7%) was in the value of screw holding strength perpendicular to the surface. The values of all panels except panel type F exceeded the minimum modulus of elasticity (1600 N mm-2) required for furniture production according to the EN 312-P2 standard. Results of the analyses showed that forest waste (10% and 20%) is a suitable renewable raw material source for panel production.
- Open Access
- 15 January 2018
- Published by AVES YAYINCILIK A.Ş. in Forestist
- Vol. 68 (1) , 42-52
Effect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) wood
In this study, the effect of heat treatment on dimensional stability of ash (Fraxinus angustifolia Vahl.) wood, which naturally grows in Turkey, was investigated. Ash wood samples were subjected to the heat treatment process at different temperatures (120°C, 160°C, 190°C, and 210°C) and for different time periods (3, 6 and 9 h) in water vapor atmosphere. Water absorption, water repellent effectiveness, anti-swell effectiveness (ASE, TS 4084) and Attenuated Total Reflection - Fouirer Transform Infrared Spektrofotometre (ATR-FTIR) were performed on the test samples. Generally, although water absorption decreased with an increase in treatment temperature and time period, the mean of water repellent effectiveness and ASE increased. It was determined that decreases in the absorbance value of the peak belong to the -OH stretching vibration depended on heat treatment temperature increases. In particular, ASE increased to >40% with a rapid increase after 3 hours application of heat treatment at 190°C. The highest dimensional stability (58.4%) of ash wood was detected in the highest heat treatment temperature and time period (210°C and 9 h, respectively). Therefore, it was shown that the value and product quality of solid products produced from ash wood with heat treatment can be improved without the use of toxic chemicals.
- 15 January 2018
- Published by AVES YAYINCILIK A.Ş. in Forestist
- Vol. 68 (1) , 42-52
Open AccessEffect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) wood
In this study, the effect of heat treatment on dimensional stability of ash (Fraxinus angustifolia Vahl.) wood, which naturally grows in Turkey, was investigated. Ash wood samples were subjected to the heat treatment process at different temperatures (120°C, 160°C, 190°C, and 210°C) and for different time periods (3, 6 and 9 h) in water vapor atmosphere. Water absorption, water repellent effectiveness, anti-swell effectiveness (ASE, TS 4084) and Attenuated Total Reflection - Fouirer Transform Infrared Spektrofotometre (ATR-FTIR) were performed on the test samples. Generally, although water absorption decreased with an increase in treatment temperature and time period, the mean of water repellent effectiveness and ASE increased. It was determined that decreases in the absorbance value of the peak belong to the -OH stretching vibration depended on heat treatment temperature increases. In particular, ASE increased to >40% with a rapid increase after 3 hours application of heat treatment at 190°C. The highest dimensional stability (58.4%) of ash wood was detected in the highest heat treatment temperature and time period (210°C and 9 h, respectively). Therefore, it was shown that the value and product quality of solid products produced from ash wood with heat treatment can be improved without the use of toxic chemicals.
- Open Access
- 15 October 2017
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 18 (2) , 1-9
Orta tabakası kompost atığı ilaveli yongalevhaların vida tutma gücü ve ısı iletkenlik değerlerinin belirlenmesi
En tr In is study, screw holding and thermal conductivity values of particleboard produced from wood and compost waste were investigated under the laboratory conditions. To that end, the compost waste and industrial wood chips were used to a certain extent in the core layer while only industrial wood chips were used in the surface layers. Particleboard produced in 50x50x1.8 cm dimensions, at 0.630 g cm-3 density with using 50% urea formaldehyde adhesive. The surface and edge vertical screw holding and thermal conductivity of particleboards were determined. It was stated that addition of compost waste affected the surface and edge vertical screw holding of particleboard. The thermal conductivity values belonging to particleboard were found to vary between 0.086-0.120 W m-1°K-1. The best results for the insulation board were obtained from the particleboard using 100% compost waste in the core layer. Bu çalışmada laboratuvar ortamında odun ve kompost atıklarından üre formaldehit tutkalı kullanılarak üretilen yongalevhaların vida tutma gücü ve ısı iletkenlik değerleri araştırılmıştır. Bu amaçla, dış tabakada sadece endüstriyel odun yongası kullanılır iken orta takada ise belli oranlarda kompost atığı ve endüstriyel odun yongası karışımı kullanılmıştır. Levha yoğunluğu 0.630 g cm-3 olan, 50x50x1.8 cm boyutlarında, %50’lik üre formaldehit tutkalı kullanılarak yatık preslenmiş yongalevhalar üretilmiştir. Levhaların yüzeylerine ve kenarlarına dik vida tutma gücü ile ısı iletkenlik değerleri belirlenmiştir. Kompost atığı ilavesinin, yongalevhaların yüzeyine dik ve paralel yöndeki vida tutma gücü değerleri üzerine etkili olduğu saptanmıştır. Levha gruplarına ait ısı iletkenlik değerleri 0.086-0.120 W m-1°K-1 arasında değiştiği tespit edilmiştir. İzolasyon levhası olarak en iyi sonuçlar orta tabakasında %100 kompost atığı kullanılan yongalevhalarda elde edilmiştir.
- 15 October 2017
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 18 (2) , 1-9
Open AccessOrta tabakası kompost atığı ilaveli yongalevhaların vida tutma gücü ve ısı iletkenlik değerlerinin belirlenmesi
En tr In is study, screw holding and thermal conductivity values of particleboard produced from wood and compost waste were investigated under the laboratory conditions. To that end, the compost waste and industrial wood chips were used to a certain extent in the core layer while only industrial wood chips were used in the surface layers. Particleboard produced in 50x50x1.8 cm dimensions, at 0.630 g cm-3 density with using 50% urea formaldehyde adhesive. The surface and edge vertical screw holding and thermal conductivity of particleboards were determined. It was stated that addition of compost waste affected the surface and edge vertical screw holding of particleboard. The thermal conductivity values belonging to particleboard were found to vary between 0.086-0.120 W m-1°K-1. The best results for the insulation board were obtained from the particleboard using 100% compost waste in the core layer. Bu çalışmada laboratuvar ortamında odun ve kompost atıklarından üre formaldehit tutkalı kullanılarak üretilen yongalevhaların vida tutma gücü ve ısı iletkenlik değerleri araştırılmıştır. Bu amaçla, dış tabakada sadece endüstriyel odun yongası kullanılır iken orta takada ise belli oranlarda kompost atığı ve endüstriyel odun yongası karışımı kullanılmıştır. Levha yoğunluğu 0.630 g cm-3 olan, 50x50x1.8 cm boyutlarında, %50’lik üre formaldehit tutkalı kullanılarak yatık preslenmiş yongalevhalar üretilmiştir. Levhaların yüzeylerine ve kenarlarına dik vida tutma gücü ile ısı iletkenlik değerleri belirlenmiştir. Kompost atığı ilavesinin, yongalevhaların yüzeyine dik ve paralel yöndeki vida tutma gücü değerleri üzerine etkili olduğu saptanmıştır. Levha gruplarına ait ısı iletkenlik değerleri 0.086-0.120 W m-1°K-1 arasında değiştiği tespit edilmiştir. İzolasyon levhası olarak en iyi sonuçlar orta tabakasında %100 kompost atığı kullanılan yongalevhalarda elde edilmiştir.
- Open Access
- 8 January 2015
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 17 (2) , 435-446
Changes in the chemical structure and decay resistance of heat-treated narrow-leaved ash wood
We analyzed the effects of heat treatment on the chemical structure of wood from narrow-leafed Ash (Fraxinus angustifolia), a fast-growing and economically valuable species. We also analyzed the effects of heat treatment on the wood’s resistance to four decay fungi. Narrow-leafed Ash wood samples were heated with saturated steam to 140, 180, 200, and 220°C for 2, 4, and 6 h. The relative contents of extractable components were analyzed, as well as the levels of holocellulose, cellulose, and lignin. In addition, the density, equilibrium moisture content, and pH of the samples were measured. To determine the effects of heat treatment on resistance to decay fungi, the samples were exposed to the white rot fungus Trametes versicolor, dry rot fungus Serpula lacrymans, and the brown rot fungi Coniophora puteana and Gloeophyllum trabeum. Changes in the chemical composition of the wood due to heat treatment were correlated with increased resistance to fungal decay. While the hemicellulose content was dramatically reduced with increasing temperature and treatment duration, the lignin content increased proportionately. Thus, heat treatment is an environmentally friendly method of preserving narrow-leafed Ash wood against various decay fungi.
- 8 January 2015
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 17 (2) , 435-446
Open AccessChanges in the chemical structure and decay resistance of heat-treated narrow-leaved ash wood
We analyzed the effects of heat treatment on the chemical structure of wood from narrow-leafed Ash (Fraxinus angustifolia), a fast-growing and economically valuable species. We also analyzed the effects of heat treatment on the wood’s resistance to four decay fungi. Narrow-leafed Ash wood samples were heated with saturated steam to 140, 180, 200, and 220°C for 2, 4, and 6 h. The relative contents of extractable components were analyzed, as well as the levels of holocellulose, cellulose, and lignin. In addition, the density, equilibrium moisture content, and pH of the samples were measured. To determine the effects of heat treatment on resistance to decay fungi, the samples were exposed to the white rot fungus Trametes versicolor, dry rot fungus Serpula lacrymans, and the brown rot fungi Coniophora puteana and Gloeophyllum trabeum. Changes in the chemical composition of the wood due to heat treatment were correlated with increased resistance to fungal decay. While the hemicellulose content was dramatically reduced with increasing temperature and treatment duration, the lignin content increased proportionately. Thus, heat treatment is an environmentally friendly method of preserving narrow-leafed Ash wood against various decay fungi.