Jayakumar Jayaraj
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jayakumar Jayaraj has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Geetika Yadav
Indian Council for Medical Research, New Delhi, India
2 shared publications Shanty Chacko
Karunya Institute of Technology and Sciences, Coimbatore, India
2 shared publications- Subha Hency Jose Paul
Division of Biomedical Engineering, Karunya Institute of Technology and Sciences, Coimbatore, India
2 shared publications - Vijai Sivalingam
Division of Biomedical Engineering, Karunya Institute of Technology and Sciences, Coimbatore, India
2 shared publications A. Senthil Kumar
Dilla University, Ethiopia
1 shared publication- Abdullah Alwabli
Department of Electrical Engineering, College of Engineering and Computing in Al-Qunfudhah, Umm al-Qura University, Mecca, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
- 8 October 2026
- Published by Springer Nature in Discover Applied Sciences
Smart oxygen delivery using IoT-based physiological monitoring and adaptive oxygen flow control
This study presents the design and development of a portable oxygen concentrator prototype with IoT-enabled monitoring and automated oxygen-flow regulation based on measured physiological parameters. An ESP32 microcontroller processes data and handles wireless communication, while a MAX30102 sensor measures peripheral oxygen saturation (SpO 2 ) and heart rate for system monitoring and control. The developed prototype provides oxygen flow rates ranging from 1 to 5 LPM, with oxygen purity measured between 90.68 ± 0.084% and 93.34 ± 0.114% across the tested flow conditions. The corresponding outlet pressure ranged from 1.150 ± 0.007 to 1.200 ± 0.007 bar, while stabilization time increased from 32.0 ± 0.707 to 46.0 ± 0.707 s. Power consumption increased from 142 to 150 W as the flow rate increased from 1 to 5 LPM. Each operating condition was evaluated using five experimental repetitions. In automatic mode, the closed-loop controller adjusts the oxygen-flow setting according to variations in the measured SpO 2 level. The system achieved a local control latency of 42.0 ± 3.0 ms, a ThingSpeak communication latency of 195.0 ± 8.0 ms, and a total end-to-end latency of 237.0 ± 7.0 ms. The acquired measurements were displayed locally through an OLED interface and transmitted to the ThingSpeak cloud platform for remote monitoring. The developed system is a bench-tested research prototype, and the reported results are limited to laboratory-level evaluation. The findings demonstrate the feasibility of integrating physiological sensing, automated flow regulation, and IoT-based monitoring within a portable oxygen-concentrator prototype; however, clinical validation and long-term reliability assessment are required before any medical or patient-specific application can be established.
- 8 October 2026
- Published by Springer Nature in Discover Applied Sciences
Open AccessSmart oxygen delivery using IoT-based physiological monitoring and adaptive oxygen flow control
This study presents the design and development of a portable oxygen concentrator prototype with IoT-enabled monitoring and automated oxygen-flow regulation based on measured physiological parameters. An ESP32 microcontroller processes data and handles wireless communication, while a MAX30102 sensor measures peripheral oxygen saturation (SpO 2 ) and heart rate for system monitoring and control. The developed prototype provides oxygen flow rates ranging from 1 to 5 LPM, with oxygen purity measured between 90.68 ± 0.084% and 93.34 ± 0.114% across the tested flow conditions. The corresponding outlet pressure ranged from 1.150 ± 0.007 to 1.200 ± 0.007 bar, while stabilization time increased from 32.0 ± 0.707 to 46.0 ± 0.707 s. Power consumption increased from 142 to 150 W as the flow rate increased from 1 to 5 LPM. Each operating condition was evaluated using five experimental repetitions. In automatic mode, the closed-loop controller adjusts the oxygen-flow setting according to variations in the measured SpO 2 level. The system achieved a local control latency of 42.0 ± 3.0 ms, a ThingSpeak communication latency of 195.0 ± 8.0 ms, and a total end-to-end latency of 237.0 ± 7.0 ms. The acquired measurements were displayed locally through an OLED interface and transmitted to the ThingSpeak cloud platform for remote monitoring. The developed system is a bench-tested research prototype, and the reported results are limited to laboratory-level evaluation. The findings demonstrate the feasibility of integrating physiological sensing, automated flow regulation, and IoT-based monitoring within a portable oxygen-concentrator prototype; however, clinical validation and long-term reliability assessment are required before any medical or patient-specific application can be established.
- Open Access
- 25 August 2026
- Published by MDPI AG in Preprints.org
A Forecast-Embedded, Uncertainty-Aware Digital Twin for MPC-Coupled Battery Sizing and Multi-Objective Energy Management in PV-Based DC Microgrids
Renewable-rich DC microgrids require energy management that quantifies photovoltaic and load uncertainty rather than merely reacting to it. This paper presents a forecast-embedded Digital Twin (DT) framework in which a hybrid BiLSTM–GPR forecaster feeds a Model-Predictive-Control (MPC) battery sizing and dispatch pipeline, propagating the GPR's predictive standard deviation into a time-varying, chance-constrained state-of-charge (SOC) reserve applied identically across four Energy Management Strategies (Rule-Based, MPC, Q-Learning, and Fuzzy Logic), evaluated over a 13-day study with pairwise Wilcoxon signed-rank tests on 200 matched-pair Monte Carlo trials. A train/inference bin-edge inconsistency in the Q-Learning controller is corrected, reducing its Monte Carlo cost variance roughly fivefold. MPC remains the lowest-cost strategy ($8.5259 versus $11.0837, $10.4079, and $11.3823 for Rule-Based, Q-Learning, and Fuzzy Logic), with 100% cost-rank consistency and a 32.65% cost reduction relative to a no-Digital-Twin baseline, though it never achieves the lowest peak grid import across the 13-day set (0.0% peak win-rate), exposing a cost-reliability trade-off. The uncertainty-aware reserve is obtained at essentially no cost, reducing MPC's cost by 4.55% with no measurable change in peak grid import relative to fixed SOC bounds. All pairwise EMS cost distributions differ significantly (p ≤ 3.00×10⁻³¹). Results are reported alongside a 17-item architectural validation checklist.
- 25 August 2026
- Published by MDPI AG in Preprints.org
Open AccessA Forecast-Embedded, Uncertainty-Aware Digital Twin for MPC-Coupled Battery Sizing and Multi-Objective Energy Management in PV-Based DC Microgrids
Renewable-rich DC microgrids require energy management that quantifies photovoltaic and load uncertainty rather than merely reacting to it. This paper presents a forecast-embedded Digital Twin (DT) framework in which a hybrid BiLSTM–GPR forecaster feeds a Model-Predictive-Control (MPC) battery sizing and dispatch pipeline, propagating the GPR's predictive standard deviation into a time-varying, chance-constrained state-of-charge (SOC) reserve applied identically across four Energy Management Strategies (Rule-Based, MPC, Q-Learning, and Fuzzy Logic), evaluated over a 13-day study with pairwise Wilcoxon signed-rank tests on 200 matched-pair Monte Carlo trials. A train/inference bin-edge inconsistency in the Q-Learning controller is corrected, reducing its Monte Carlo cost variance roughly fivefold. MPC remains the lowest-cost strategy ($8.5259 versus $11.0837, $10.4079, and $11.3823 for Rule-Based, Q-Learning, and Fuzzy Logic), with 100% cost-rank consistency and a 32.65% cost reduction relative to a no-Digital-Twin baseline, though it never achieves the lowest peak grid import across the 13-day set (0.0% peak win-rate), exposing a cost-reliability trade-off. The uncertainty-aware reserve is obtained at essentially no cost, reducing MPC's cost by 4.55% with no measurable change in peak grid import relative to fixed SOC bounds. All pairwise EMS cost distributions differ significantly (p ≤ 3.00×10⁻³¹). Results are reported alongside a 17-item architectural validation checklist.
- Open Access
- 24 October 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (11) , 1-37
Intelligent oxygen delivery: a portable concentrator combining closed-loop automation, PSA, and Q-learning for optimized performance
- 24 October 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (11) , 1-37
Open AccessIntelligent oxygen delivery: a portable concentrator combining closed-loop automation, PSA, and Q-learning for optimized performance
- Open Access
- 30 August 2025
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 13 (3) , 438-446
Sustainable Grid Integration of PV Systems using Dual-Phase Boost Converter and Intelligent MPPT Techniques
The increasing demand for energy and environmental concerns necessitate the integration of Renewable Energy Sources (RES), particularly Photovoltaic (PV) systems, into modern power grids. This paper presents an efficient grid connected PV system utilizing a dual-phase Interleaved Boost Converter (IBC) and an intelligent Maximum Power Point Tracking (MPPT) approach based on Adaptive Neuro Fuzzy Inference System (ANFIS). To enhance the controller's performance, optimization algorithms Class Topper Optimization (CTO), Falcon Optimization Algorithm (FOA), and Pufferfish Optimization Algorithm (POA) are employed. The dual phase IBC ensures reduced ripple, improved voltage gain, and stable power conversion. Simulation results in MATLAB/Simulink demonstrate that the proposed system achieves 94% efficiency, 0.95% Total Harmonic Distortion (THD), and a maximum MPPT tracking efficiency of 97.05% using the POA-ANFIS controller.
- 30 August 2025
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 13 (3) , 438-446
Open AccessSustainable Grid Integration of PV Systems using Dual-Phase Boost Converter and Intelligent MPPT Techniques
The increasing demand for energy and environmental concerns necessitate the integration of Renewable Energy Sources (RES), particularly Photovoltaic (PV) systems, into modern power grids. This paper presents an efficient grid connected PV system utilizing a dual-phase Interleaved Boost Converter (IBC) and an intelligent Maximum Power Point Tracking (MPPT) approach based on Adaptive Neuro Fuzzy Inference System (ANFIS). To enhance the controller's performance, optimization algorithms Class Topper Optimization (CTO), Falcon Optimization Algorithm (FOA), and Pufferfish Optimization Algorithm (POA) are employed. The dual phase IBC ensures reduced ripple, improved voltage gain, and stable power conversion. Simulation results in MATLAB/Simulink demonstrate that the proposed system achieves 94% efficiency, 0.95% Total Harmonic Distortion (THD), and a maximum MPPT tracking efficiency of 97.05% using the POA-ANFIS controller.
- Open Access
- 2 April 2024
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 14 (2) , 13408-13415
A Hybrid Intelligent Controller for Extended-Range Electric Vehicles
A smart battery electric vehicle control framework is proposed in this paper. The specific controller empowers ceaseless observation and management of the battery's state with the scope of extending the vehicle's driving range under varying temperature and driving pattern conditions. The proposed method utilizes an incorporated scheme for dealing with a crossover energy stockpiling framework to expand a battery's lifespan while further ensuring its smooth activity.
- 2 April 2024
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 14 (2) , 13408-13415
Open AccessA Hybrid Intelligent Controller for Extended-Range Electric Vehicles
A smart battery electric vehicle control framework is proposed in this paper. The specific controller empowers ceaseless observation and management of the battery's state with the scope of extending the vehicle's driving range under varying temperature and driving pattern conditions. The proposed method utilizes an incorporated scheme for dealing with a crossover energy stockpiling framework to expand a battery's lifespan while further ensuring its smooth activity.
- Open Access
- 20 September 2023
- Published by MDPI AG in Preprints.org
Design and Implementation of Remote Controlled High Temperature Short Time (HTST) Pasteurization System for Healthy Milk Production
The dairy industry relies heavily on milk pasteurization to ensure the safety and quality of milk products. Pasteurization is a process that involves heating milk to a specific temperature for a set period of time to kill harmful bacteria and other pathogens while preserving its nutritional value. recent years, newer techniques such as High Temperature Short Time (HTST) pasteurization have gained popularity due to their efficiency and effectiveness. HTST pasteurization involves rapidly heating milk to a high temperature for a short duration of time, followed by rapid cooling. This process helps to minimize the loss of flavor and nutrients in milk while ensuring its safety. However, there is still a need in the market for a compact and remotely controlled process plant for milk pasteurization. The proposed work aims to address this need by designing a process plant that is not only compact but also remotely controlled, allowing for efficient and convenient operation. can control the process plant remotely, allowing for flexibility and convenience in monitoring and managing the pasteurization process from anywhere with an internet connection
- 20 September 2023
- Published by MDPI AG in Preprints.org
Open AccessDesign and Implementation of Remote Controlled High Temperature Short Time (HTST) Pasteurization System for Healthy Milk Production
The dairy industry relies heavily on milk pasteurization to ensure the safety and quality of milk products. Pasteurization is a process that involves heating milk to a specific temperature for a set period of time to kill harmful bacteria and other pathogens while preserving its nutritional value. recent years, newer techniques such as High Temperature Short Time (HTST) pasteurization have gained popularity due to their efficiency and effectiveness. HTST pasteurization involves rapidly heating milk to a high temperature for a short duration of time, followed by rapid cooling. This process helps to minimize the loss of flavor and nutrients in milk while ensuring its safety. However, there is still a need in the market for a compact and remotely controlled process plant for milk pasteurization. The proposed work aims to address this need by designing a process plant that is not only compact but also remotely controlled, allowing for efficient and convenient operation. can control the process plant remotely, allowing for flexibility and convenience in monitoring and managing the pasteurization process from anywhere with an internet connection
- Open Access
- 1 January 2023
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 13 (V13i4) , 1467-1480
An Efficient ARIA-RSA-SHA256 Hybridized Encryption Algorithm for Metering Data in Smart Grid Network Systems
Digitizing the traditional electrical power grid and the transition of the grid operations to Smart Grid functionalities could yield very efficient results. Despite all the advantages, the smart grid networks pose a serious threat of cyber-attacks emerging at the various nodes of the system. The cyber threat models could vary from minimal effect on the system to even massive power outages disrupting the entire system. One of the vulnerable and crucial nodes of the smart grid where the security breaches can occur is the Advanced Metering Infrastructure component of the smart grid. Hence, it becomes essential for efficient security protocols in place, to secure the metering data originating from the consumer premises through smart meters. In this paper, we have explored the cryptographic encryption algorithms, which are most effective in securely transmitting data from smart meters to the utility centers and vice versa. In particular, using the approach of combining the strengths of asymmetric and asymmetric public key algorithms to provide hybrid functionalities are very efficient in Internet of Things (IoT) systems. Therefore, in this research work, we propose an enhanced hybrid security protocol with ARIA encryption algorithm and Rivest–Shamir–Adleman (RSA) key encryption algorithm with SHA256 hash digital signature for the secure transmission of metering data in smart grid networks. The results of this hybrid application in smart grids shows significant improvement in the defined performance metrics.
- 1 January 2023
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 13 (V13i4) , 1467-1480
Open AccessAn Efficient ARIA-RSA-SHA256 Hybridized Encryption Algorithm for Metering Data in Smart Grid Network Systems
Digitizing the traditional electrical power grid and the transition of the grid operations to Smart Grid functionalities could yield very efficient results. Despite all the advantages, the smart grid networks pose a serious threat of cyber-attacks emerging at the various nodes of the system. The cyber threat models could vary from minimal effect on the system to even massive power outages disrupting the entire system. One of the vulnerable and crucial nodes of the smart grid where the security breaches can occur is the Advanced Metering Infrastructure component of the smart grid. Hence, it becomes essential for efficient security protocols in place, to secure the metering data originating from the consumer premises through smart meters. In this paper, we have explored the cryptographic encryption algorithms, which are most effective in securely transmitting data from smart meters to the utility centers and vice versa. In particular, using the approach of combining the strengths of asymmetric and asymmetric public key algorithms to provide hybrid functionalities are very efficient in Internet of Things (IoT) systems. Therefore, in this research work, we propose an enhanced hybrid security protocol with ARIA encryption algorithm and Rivest–Shamir–Adleman (RSA) key encryption algorithm with SHA256 hash digital signature for the secure transmission of metering data in smart grid networks. The results of this hybrid application in smart grids shows significant improvement in the defined performance metrics.
- Open Access
- 30 September 2022
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 10 (3) , 550-556
Regression Based Predictive Machine Learning Model for Pervasive Data Analysis in Power Systems
The main aim of this paper is to highlight the benefits of Machine Learning in the power system applications. The regression-based machine learning model is used in this paper for predicting the power system analysis and Economic analysis results. In this paper, Predictive ML models for two modified IEEE 14-bus and IEEE-30 bus systems, integrated with renewable energy sources and reactive power compensative devices are proposed and developed with features that include an hour of the day, solar irradiation, wind velocity, dynamic grid price, and system load. An hour-wise input database for the model development is generated from monthly average data and hour-wise daily curves with normally distributed standard deviations. A very significant Validation technique (K Fold cross validation technique) is explained. Correlation between Input and output variable using spearman’s correlation analysis using Heat maps. Followed by the Multiple Linear Regression based Training and testing of the Modified IEEE 14 and IEEE30 Bus systems for base load case, 10% and 20% load increment with the 5-fold cross validation is also presented. Comparative analysis is performed to find the best fit ML Model for our research.
- 30 September 2022
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 10 (3) , 550-556
Open AccessRegression Based Predictive Machine Learning Model for Pervasive Data Analysis in Power Systems
The main aim of this paper is to highlight the benefits of Machine Learning in the power system applications. The regression-based machine learning model is used in this paper for predicting the power system analysis and Economic analysis results. In this paper, Predictive ML models for two modified IEEE 14-bus and IEEE-30 bus systems, integrated with renewable energy sources and reactive power compensative devices are proposed and developed with features that include an hour of the day, solar irradiation, wind velocity, dynamic grid price, and system load. An hour-wise input database for the model development is generated from monthly average data and hour-wise daily curves with normally distributed standard deviations. A very significant Validation technique (K Fold cross validation technique) is explained. Correlation between Input and output variable using spearman’s correlation analysis using Heat maps. Followed by the Multiple Linear Regression based Training and testing of the Modified IEEE 14 and IEEE30 Bus systems for base load case, 10% and 20% load increment with the 5-fold cross validation is also presented. Comparative analysis is performed to find the best fit ML Model for our research.
- Open Access
- 30 March 2022
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 10 (1) , 51-56
Identification of Power Leakage and Protection of Over Voltage in Residential Buildings
In many residential buildings the electrical wires of individual houses are laid in the same conduit pipe and some mistakes could be made in identifying similar coloured wires when they are laid in same conduit pipe. Most of the faults are caused by the neutral interconnection in the wiring system. Usually neutral wires are connected to neutral bus within the panel board or switchboard, and are "bonded" to earth ground. In our secondary distribution, tree system of supply is mostly utilized. The voltage of each phase to neutral will be maintained at rated value even during the unbalanced load conditions. If neutral wire connection is poor the voltage at each phase will be different from one another, such an isolated neutral point is called floating neutral and the voltage of the point is always changing. This is the reason for over voltage causing damage to appliance’s which should be protected. In this paper, a smart system that identifies power leakage and provides over voltage protection to the residential building is proposed.
- 30 March 2022
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 10 (1) , 51-56
Open AccessIdentification of Power Leakage and Protection of Over Voltage in Residential Buildings
In many residential buildings the electrical wires of individual houses are laid in the same conduit pipe and some mistakes could be made in identifying similar coloured wires when they are laid in same conduit pipe. Most of the faults are caused by the neutral interconnection in the wiring system. Usually neutral wires are connected to neutral bus within the panel board or switchboard, and are "bonded" to earth ground. In our secondary distribution, tree system of supply is mostly utilized. The voltage of each phase to neutral will be maintained at rated value even during the unbalanced load conditions. If neutral wire connection is poor the voltage at each phase will be different from one another, such an isolated neutral point is called floating neutral and the voltage of the point is always changing. This is the reason for over voltage causing damage to appliance’s which should be protected. In this paper, a smart system that identifies power leakage and provides over voltage protection to the residential building is proposed.
- Open Access
- 30 September 2021
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 9 (3) , 57-65
A Review on the Feasibility of Deployment of Renewable Energy Sources for Electric Vehicles under Smart Grid Environment
Nowadays, Energy consumption in the field of transportation comes next to industrial consumption worldwide. If transportation is completely powered by renewable energy, the utilization of fossil fuels can be drastically reduced, which will result in a lesser amount of greenhouse gas emissions. Electric vehicles (EVs) can act as an alternative to make transportation pollution-free. Large-scale usage of EVs causes high electricity demand on the supply system. This problem can be overcome by utilizing renewable energy sources (RESs) for Electric Vehicle charging. Due to the unpredictability of RESs, coordinating EV charging with other loads and renewable generation is problematic. By using EVs as energy units, power fluctuations in the electric grid can be compensated. This paper presents a summary of recent research in the domain of integration of renewable energy sources with electric vehicles (EVs) under the smart grid environment. Electric vehicles-smart grid integrated systems face several issues related to communication, grid infrastructure and control in the future power system. Feasibility of integration of solar and wind energy systems with electric vehicles is discussed in section 2. The existing research articles in this area are classified into two based on the purpose: EVs integration into the electric grid and Vehicle to grid services. The function of V2G in the electricity market, as well as its management concerns, are investigated in section 3. Finally, the research gaps and future scope of incorporating electric vehicles with renewable energy sources and the Smart grid are highlighted.
- 30 September 2021
- Published by FOREX Publication in International Journal of Electrical and Electronics Research
- Vol. 9 (3) , 57-65
Open AccessA Review on the Feasibility of Deployment of Renewable Energy Sources for Electric Vehicles under Smart Grid Environment
Nowadays, Energy consumption in the field of transportation comes next to industrial consumption worldwide. If transportation is completely powered by renewable energy, the utilization of fossil fuels can be drastically reduced, which will result in a lesser amount of greenhouse gas emissions. Electric vehicles (EVs) can act as an alternative to make transportation pollution-free. Large-scale usage of EVs causes high electricity demand on the supply system. This problem can be overcome by utilizing renewable energy sources (RESs) for Electric Vehicle charging. Due to the unpredictability of RESs, coordinating EV charging with other loads and renewable generation is problematic. By using EVs as energy units, power fluctuations in the electric grid can be compensated. This paper presents a summary of recent research in the domain of integration of renewable energy sources with electric vehicles (EVs) under the smart grid environment. Electric vehicles-smart grid integrated systems face several issues related to communication, grid infrastructure and control in the future power system. Feasibility of integration of solar and wind energy systems with electric vehicles is discussed in section 2. The existing research articles in this area are classified into two based on the purpose: EVs integration into the electric grid and Vehicle to grid services. The function of V2G in the electricity market, as well as its management concerns, are investigated in section 3. Finally, the research gaps and future scope of incorporating electric vehicles with renewable energy sources and the Smart grid are highlighted.