YSYakup Sahin

Yakup Sahin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yakup Sahin has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Compact and Cost-Efficient Dual-Buck NPC Inverter with Dead-Time Elimination and Shoot-Through Suppression

    by Yakup Sahin, Frede Blaabjerg, Hasan Hatas, Naim Suleyman Ting, Ahmet Faruk Bakan, Md Rishad Ahmed

    Dead-time insertion is the conventional method for preventing shoot-through faults in neutral-point-clamped inverters (NPCIs), but it inevitably degrades output-voltage quality, lowers efficiency, and increases control complexity due to dead-time compensation. This article presents a novel transformer-based dual-buck NPCI (T-DB-NPCI) cell that inherently solves this problem at the topology level. The proposed structure not only eliminates the need for dead-time during normal switching transitions but also provides robust hardware suppression of destructive, long-duration shoot-through faults. The proposed cell is designed to safely withstand forced shoot-through faults of up to 2 μs, ensuring high reliability without requiring complex detection algorithms. The topology features a remarkably compact structure comprising only a single high-frequency transformer and one auxiliary diode, enabling all semiconductor devices to operate at only half the DC-link voltage. Furthermore, the streamlined structure allows for the use of standard sinusoidal pulse width modulation (SPWM), significantly reducing control complexity. Comprehensive results from a 425-W prototype achieving 97.4% peak experimental efficiency confirm excellent performance. A comparative analysis reveals an 8% improvement in power density (683 W/kg) and a 6% cost advantage over its closest counterpart. The T-DB-NPCI topology emerges as a highly promising solution where reliability and simplicity are critical.


  • Enhanced soft-switched T-type neutral-point clamped (T-NPC) inverter with reduced component number

    by Mehmet Cihat Ozgenel, Naim Suleyman Ting, Yakup Sahin

    This paper presents an enhanced soft-switched T-type neutral-point clamped inverter featuring a compact active snubber cell that delivers zero-voltage transition turn-on and zero-voltage switching (ZVS) turn-off for the main switches, while auxiliary switches operate with zero-current switching turn-on and ZVS turn-off. Unlike prior designs, four auxiliary-path diodes are eliminated, reducing component count, conduction path length, and reverse-recovery losses, which in turn lowers cost, eases thermal management, and boosts power density. The proposed topology maintains full soft switching (SS) for all active devices without introducing additional voltage or current stress. The theoretical analysis of the inverter is clarified, and the operating modes for steady-state analysis are presented in detail. Experimental validation on a 400 V, 1 kW, and 100 kHz prototype demonstrates consistent SS across load conditions and a peak efficiency of 97.2%. The combination of higher efficiency, structural simplicity, and cost-effectiveness makes the proposed inverter a strong candidate for high-performance, compact T-type applications in renewable energy, and electric drive systems.

  • Enhanced Efficiency and Cost‐Effectiveness in PWM DC‐DC Boost Converter Through Direct Power Transfer and Reduced Capacitor Voltage

    by Yakup Sahin

    This paper presents a novel DC–DC boost converter topology that works similarly to a conventional PWM DC–DC boost converter, but with remarkable improvements. When the filter capacitor voltage in the conventional converter matches the output voltage, the proposed converter lowers the filter capacitor's rated voltage by an amount equivalent to the input voltage. As a result, compared to conventional boost converters, the proposed converter achieves 6% higher power density and 6.3% cost reduction due to the filter capacitance with the lower rated voltage. In addition, the proposed converter enables direct power transfer (DPT) by transferring part of the input energy to the output stage when the switch is in the on‐state. This feature not only simplifies the structure of the converter but also increases its efficiency and lowers the cost, making it more practical for various applications. Comprehensive theoretical analyses of the converter are provided, supported by implementing of a 50‐kHz, 100‐W laboratory prototype. The experimental results validate the theoretical analyses, demonstrating an overall efficiency of 95.1% at the nominal output power rating.


  • Efficient Soft‐Switching Snubber Cell Design for PWM DC‐DC Boost Converters: Enhanced Load‐Independent Performance

    by Yakup Sahin, Naim Suleyman Ting

    Soft‐switching (SS) boost converters are extensively utilized in applications such as renewable energy systems, electric vehicles, and high‐efficiency power supplies, as they offer reduced switching losses and enhanced overall efficiency. Zero‐voltage transition (ZVT) snubber cells that used SS operation perform poorly in zero‐voltage switching (ZVS) turn‐off at light load, although they perform well at heavy load. This study proposes a novel SS snubber cell for the PWM‐DC boost converter, ensuring excellent ZVS turn‐off performance under all load conditions. The main switch is turned off with ZVS at heavy and light load, so the turn‐off performance is independent of the load conditions. In addition, the main switch is switched on with ZVT, and the main diode is switched with SS. The main and auxiliary semiconductor components do not expose additional voltage. In addition, the semiconductor switches are switched on with zero‐current switching (ZCS) and switched off with ZVS, whereas the auxiliary diode is switched with SS. The theoretical analysis of the converter is presented, and an experimental study is conducted to demonstrate the analysis. The proposed converter is operated with an output power of 500 W and a switching frequency of 100 kHz.


  • Design, analysis, and implementation of DC‐DC boost converter with new active snubber cell

    by Hilal Sebnem Gecmez, Naim Suleyman Ting, Yakup Sahin

    In this paper, a new active snubber cell for DC‐DC boost converters is introduced for the purpose of soft switching. The introduced snubber cell ensures lossless turning‐on by zero‐voltage transition (ZVT) and turning‐off by zero‐voltage switching (ZVS) of the main switch. Besides, it enables turning‐on by ZVS and turning‐off by zero current switching (ZCS) of the main diode. None of the semiconductor power devices are subjected to extra voltage stress, and all of them operate by soft switching (SS). The converter can successfully maintain the SS even under light loads. Furthermore, the proposed converter structure is advantageous in terms of simplicity and low cost. The operating modes and theoretical analysis of the introduced converter are presented and it is validated using a prototype with a 500 W output power and at the 100 kHz switching frequency. Owing to the proposed active snubber cell, the converter efficiency is achieved as 97.2%.


  • Open Access

    Q-LEARNING BASED OBSTACLE AVOIDANCE DATA HARVESTING MODEL USING UAV and UGV

    by Erdal Aki̇n, Yakup Şahi̇n

    The Internet of Things (IoT) has revolutionized our lives by providing convenience in various aspects of our lives. However, for the IoT environment to function optimally, it is crucial to regularly collect data from IoT devices. This is because timely data collection enables more accurate evaluations and insights. Additionally, energy conservation is another crucial aspect to consider when collecting data, as it can have a significant impact on the sustainability of the IoT ecosystem. To achieve this, Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs) are increasingly being used to collect data. In this study, we delve into the problem of how UAVs and UGVs can effectively and efficiently collect data from IoT devices in an environment with obstacles. To address this challenge, we propose a Q-learning-based Obstacle Avoidance Data Harvesting (QOA-DH) method, which utilizes the principles of reinforcement learning to make decisions on data collection. Additionally, we conduct a comparison of the performance of UAVs and UGVs, considering the different restrictions and assumptions that are unique to each type of vehicle. This research aims to improve the overall efficiency and effectiveness of data collection in IoT environments and pave the way for sustainable IoT solutions.


  • Design and Implementation of a Flyback-Assisted Wide-Range Fully Soft-Switched T-Type Inverter

    by Naim Suleyman Ting, Yakup Sahin, Mehmet Cihat Ozgenel

    A novel soft-switched three-level T-type inverter is proposed in this article. The proposed inverter provides turning- on by zero-voltage transition and turning- off by zero-voltage switching (ZVS) for main switches without any voltage or current stresses. The switching energies are transferred to the snubber capacitors, so the turning- off process of the main switches is improved by these snubber capacitors. Besides, the auxiliary switches are turned on by zero-current switching and turned off by ZVS. Furthermore, all snubber diodes are operated by soft-switching (SS), and the proposed SS snubber cell decreases the electromagnetic interference noises. The novel snubber cell has a simple structure, ease of application, common-ground switches, and low-cost features. The theoretical analysis of the inverter is clarified, and the operating modes for steady-state analysis are presented in detail. The experimental results rated 1-kW output power and 100-kHz switching frequency are provided to justify the theoretical analysis. The proposed unique snubber cell can be easily implemented in other three-level inverters, and the practice is demonstrated in the article.


  • A novel capacitor‐voltage reduced bidirectional PWM DC‐DC buck‐boost converter for renewable energy battery charge system

    by Yakup Sahin, Naim Suleyman Ting, Huseyin Yesilyurt

    Summary: A novel capacitor‐voltage reduced bidirectional (CVRB) PWM DC‐DC buck‐boost converter is presented in this study. Compared to the conventional bidirectional buck‐boost converter, the proposed converter has a lower voltage rating filter capacitor. Accordingly, the given converter has a lower cost and higher power density than the conventional buck‐boost converter. Additionally, the proposed converter is more efficient due to the direct power transfer feature. Besides, the semiconductor switches have no extra voltage/current stress. The theoretical analysis of the converter is made, and its mathematical analysis is presented. The novel converter is experimentally operated in both the buck and boost modes. The experimental waveforms are shown for both operations. The proposed converter is operated in 100 W output power and 20 kHz switching frequency conditions. The efficiency of the proposed converter is 95.6% for the boost mode operation and 95.1% for the buck mode operation at the nominal output power.


  • A novel zero voltage transition boost converter and artificial neural network‐based estimation of converter efficiency

    by Naim Suleyman Ting, Fulya Aslay, Yakup Sahin

    In this paper, a novel zero voltage transition (ZVT) boost converter is proposed, and the overall efficiency of the converter is predicted with an artificial neural network (ANN) model. In the proposed converter, the main switch is turned on by ZVT and turned off by zero voltage switching (ZVS). Also, the other semiconductor elements operate by soft switching (SS). Besides, the proposed snubber cell has the bidirectional direct power transfer feature. The theoretical analyzes of the converter are verified by an prototype having 50 VDC input voltage, 100 VDC output voltage, 250 W output power, and 100 kHz switching frequency. The overall efficiency of the converter in hard switching (HS) condition is increased from 87.2% to 95.4% thanks to proposed snubber cell. Moreover, the efficiency of converter at HS operation is estimated with ANN. For this estimation, 110 efficiency values are obtained based on the different switching frequency and the output power values. When the actual efficiency measurements and the estimation results obtained with the ANN model are compared, it is seen that the results overlap and is obtained very close result to the truth by ANN. Thus, owing to the ANN model, the semiconductor power elements will not need to be operated at high frequencies and overheating, and the damaging to the elements will be prevented. Finally, the efficiency curve measurement of the converter takes long time in the experimental study when it takes highly short time as a few minutes in the estimation with ANN.