Seung Jo Yoo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seung Jo Yoo has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Ji-Hyun Lee
Electron Microscopy Research Center, Korea Basic Science Institute (KBSI), Daejeon, South Korea
3 shared publicationsJin-Gyu Kim
Electron Microscopy Research Center, Korea Basic Science Institute (KBSI), Daejeon, South Korea
3 shared publications- Jin-Gyu Kim
Center for Scientific Instrumentation, Korea Basic Science Institute, Daejeon, Republic of Korea
3 shared publications - Feng-Shou Xiao
Zhejiang University
2 shared publications - Hai Wang
Department of Chemistry, Zhejiang University, Hangzhou, 310028, China
2 shared publications Jae Won Shin
2 shared publications
Latest Publications
- Open Access
Oxidation of Fe35Mn21Ni20Cr12Al12 High Entropy Alloy in Dry Air
The isothermal oxidation of a Fe35Mn21Ni20Cr12Al12 high entropy alloy (HEA) was investigated in dry air for 50 h at 500, 600, and 700 °C after 90% cold rolling. The Fe35Mn21Ni20Cr12Al12 HEA behaves according to the linear oxidation rate with rate constants of 1 × 10−6, 3 × 10−6, and 7 × 10−6 g/(cm2·s) for oxidation at 500 °C, 600 °C, and 700 °C, respectively. The activation energy for oxidation of the HEA was calculated to be 60.866 KJ/mole in the 500–700 °C temperature range. The surface morphology and phase identification of the oxide layers were characterized. The formation of MnO2, Mn2O3, Mn3O4, Cr2O3, and Al2O3 in the oxide layers along with Fe2O3 is the key to the oxidation mechanism. The elemental mapping and line EDX scans were performed to identify the oxidation mechanisms.
Open AccessOxidation of Fe35Mn21Ni20Cr12Al12 High Entropy Alloy in Dry Air
The isothermal oxidation of a Fe35Mn21Ni20Cr12Al12 high entropy alloy (HEA) was investigated in dry air for 50 h at 500, 600, and 700 °C after 90% cold rolling. The Fe35Mn21Ni20Cr12Al12 HEA behaves according to the linear oxidation rate with rate constants of 1 × 10−6, 3 × 10−6, and 7 × 10−6 g/(cm2·s) for oxidation at 500 °C, 600 °C, and 700 °C, respectively. The activation energy for oxidation of the HEA was calculated to be 60.866 KJ/mole in the 500–700 °C temperature range. The surface morphology and phase identification of the oxide layers were characterized. The formation of MnO2, Mn2O3, Mn3O4, Cr2O3, and Al2O3 in the oxide layers along with Fe2O3 is the key to the oxidation mechanism. The elemental mapping and line EDX scans were performed to identify the oxidation mechanisms.
- Top Cited Papers
- 25 April 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (21) , 6104-6108
Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts
Methods for the hydrogenation of CO2 into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO2 into ethanol over non‐noble cobalt catalysts (CoAlOx), presenting a significant advance for the conversion of CO2 into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO2 to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g−1 h−1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlOx catalyst might be due to the formation of acetate from formate by insertion of *CHx, a key intermediate in the production of ethanol by CO2 hydrogenation.
- 25 April 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (21) , 6104-6108
Top Cited PapersSelective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts
Methods for the hydrogenation of CO2 into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO2 into ethanol over non‐noble cobalt catalysts (CoAlOx), presenting a significant advance for the conversion of CO2 into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO2 to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g−1 h−1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlOx catalyst might be due to the formation of acetate from formate by insertion of *CHx, a key intermediate in the production of ethanol by CO2 hydrogenation.
- 24 April 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (21) , 6212-6216
Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts
Methods for the hydrogenation of CO2 into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO2 into ethanol over non‐noble cobalt catalysts (CoAlOx), presenting a significant advance for the conversion of CO2 into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO2 to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g−1 h−1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlOx catalyst might be due to the formation of acetate from formate by insertion of *CHx, a key intermediate in the production of ethanol by CO2 hydrogenation.
- 24 April 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (21) , 6212-6216
Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts
Methods for the hydrogenation of CO2 into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO2 into ethanol over non‐noble cobalt catalysts (CoAlOx), presenting a significant advance for the conversion of CO2 into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO2 to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g−1 h−1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlOx catalyst might be due to the formation of acetate from formate by insertion of *CHx, a key intermediate in the production of ethanol by CO2 hydrogenation.
- Open Access
- 29 January 2018
- Published by Springer Nature in Journal of Analytical Science and Technology
- Vol. 9 (1) , 6
Advanced method for the accurate measurement of tilt angle in a transmission electron microscopy goniometer
- 29 January 2018
- Published by Springer Nature in Journal of Analytical Science and Technology
- Vol. 9 (1) , 6
Open AccessAdvanced method for the accurate measurement of tilt angle in a transmission electron microscopy goniometer
- 8 January 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (6) , 065702
Direct observation of thermal disorder and decomposition of black phosphorus
Theoretical research has been devoted to reveal the properties of black phosphorus as a two-dimensional nanomaterial, but little attention has been paid for the experimental characterization. In this study, the thermal disorder and decomposition of black phosphorus were examined using in situ heating transmission electron microscopy experiments. We observed that the breaking of crystallographic symmetry begins at 380 °C under vacuum condition, followed by the phosphorus evaporates after long-term heating at 400 °C. This decomposition process can be initiated by the surficial vacancy and proceeds toward both interlayer ([010]) and intralayer ([001]) directions. The results on the thermal behavior of black phosphorus provide useful guidance for thin film deposition and fabrication processes with black phosphorus.
- 8 January 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (6) , 065702
Direct observation of thermal disorder and decomposition of black phosphorus
Theoretical research has been devoted to reveal the properties of black phosphorus as a two-dimensional nanomaterial, but little attention has been paid for the experimental characterization. In this study, the thermal disorder and decomposition of black phosphorus were examined using in situ heating transmission electron microscopy experiments. We observed that the breaking of crystallographic symmetry begins at 380 °C under vacuum condition, followed by the phosphorus evaporates after long-term heating at 400 °C. This decomposition process can be initiated by the surficial vacancy and proceeds toward both interlayer ([010]) and intralayer ([001]) directions. The results on the thermal behavior of black phosphorus provide useful guidance for thin film deposition and fabrication processes with black phosphorus.
- 7 October 2014
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 53 (11) , 115201
Atomic variations in digital alloy InGaP/InGaAlP multiple quantum wells due to thermal treatment
- 7 October 2014
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 53 (11) , 115201
Atomic variations in digital alloy InGaP/InGaAlP multiple quantum wells due to thermal treatment
- 8 August 2014
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 53 (9) , 95001
Electron-beam-induced formation mechanisms for Ti2O3–SiO2composite nanofibers
- 8 August 2014
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 53 (9) , 95001
Electron-beam-induced formation mechanisms for Ti2O3–SiO2composite nanofibers
- 20 December 2012
- Published by Springer Nature in Metals and Materials International
- Vol. 18 (6) , 997-1001
Characterization of crystallographic properties of GaN thin film using automated crystal orientation mapping with TEM
- 20 December 2012
- Published by Springer Nature in Metals and Materials International
- Vol. 18 (6) , 997-1001
Characterization of crystallographic properties of GaN thin film using automated crystal orientation mapping with TEM