Dragana Mladenović
Dragana Mladenović has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandra Djukić-Vuković
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia
22 shared publications Jelena Pejin
15 shared publicationsLjiljana Mojović
Faculty of Technology and Metallurgy University of Belgrade Beograd Serbia
11 shared publicationsSunčica Kocić-Tanackov
Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, Novi Sad, 21000, Serbia
8 shared publications- Ljiljana Mojović
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia
7 shared publications - Miloš Radosavljević
Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21000 Novi Sad, Serbia
7 shared publications
Latest Publications
- Open Access
Fermentation of Common Nettle Extracts by Ligilactobacillus salivarius: New Avenue for the Development of Added-Value Bioactive Products
The medicinal plants industry generates approximately 30 million tons of by-products annually, most of which remain underutilized. The common nettle (Urtica dioica L., Urticaceae) is a valuable medicinal plant, rich in polyphenols, vitamins, and essential fatty acids, widely used in food and pharmaceutical applications. Its by-products still lack sustainable valorization strategies. This study aimed to valorize nettle tea by-products and flowers using green extraction techniques and microbial biotransformation. Lyophilized aqueous/ethanolic extracts were fermented with Ligilactobacillus salivarius ATCC 11741 to assess whether fermentation could enhance the content and bioavailability of phenolic compounds while maintaining probiotic viability. The results showed that fermentation significantly increased phenolic content and antioxidant activity, with chlorogenic acid concentrations increasing up to 4-fold and caffeic acid derivatives up to 2.5-fold. L. salivarius remained viable during fermentation, demonstrating the potential for the production of added-value extracts and probiotic biomass. These findings indicate that nettle by-products can be efficiently converted into functional ingredients through low-energy, environmentally friendly processes, supporting sustainable production and waste valorization.
Open AccessFermentation of Common Nettle Extracts by Ligilactobacillus salivarius: New Avenue for the Development of Added-Value Bioactive Products
The medicinal plants industry generates approximately 30 million tons of by-products annually, most of which remain underutilized. The common nettle (Urtica dioica L., Urticaceae) is a valuable medicinal plant, rich in polyphenols, vitamins, and essential fatty acids, widely used in food and pharmaceutical applications. Its by-products still lack sustainable valorization strategies. This study aimed to valorize nettle tea by-products and flowers using green extraction techniques and microbial biotransformation. Lyophilized aqueous/ethanolic extracts were fermented with Ligilactobacillus salivarius ATCC 11741 to assess whether fermentation could enhance the content and bioavailability of phenolic compounds while maintaining probiotic viability. The results showed that fermentation significantly increased phenolic content and antioxidant activity, with chlorogenic acid concentrations increasing up to 4-fold and caffeic acid derivatives up to 2.5-fold. L. salivarius remained viable during fermentation, demonstrating the potential for the production of added-value extracts and probiotic biomass. These findings indicate that nettle by-products can be efficiently converted into functional ingredients through low-energy, environmentally friendly processes, supporting sustainable production and waste valorization.
- Open Access
Beyond Food Processing: How Can We Sustainably Use Plant-Based Residues?
Plant-based residues generated within the agri-food system represent an abundant resource with significant potential for sustainable valorization. However, they are still underutilized and place a substantial burden on the environment and climate. This review discusses research trends over the past decade, combining bibliometric analysis with an overview of emerging technologies applied to the processing of residues generated from conventional crops and medicinal and aromatic plants. The bibliometric analysis reveals main valorization pathways, ranging from energy production to recovery of high-value bioactive compounds. Recent advances in this field are discussed in detail, with emphasis on low-energy and non-thermal processing (ultrasound, microwave, cold plasma), green solvents (natural deep eutectic solvents, bio-based solvents), biological pretreatments (with ligninolytic microorganisms and enzymes), thermochemical technologies (hydrothermal carbonization, pyrolysis), and emerging cascade strategies applied for multi-product recovery. Published research proves that these approaches have a great potential for sustainable valorization, while process optimization and economic feasibility remain a challenge at industrial scales for wider adoption. By providing an integrated perspective on diverse types of plant-based residues, this review highlights the importance of developing cascade and circular processing strategies, which align with global sustainability goals and encourage innovation in bio-based industries. New knowledge and advances in this field are highly required and will further help the transition of the current agri-food system towards greater circularity and sustainability.
Open AccessBeyond Food Processing: How Can We Sustainably Use Plant-Based Residues?
Plant-based residues generated within the agri-food system represent an abundant resource with significant potential for sustainable valorization. However, they are still underutilized and place a substantial burden on the environment and climate. This review discusses research trends over the past decade, combining bibliometric analysis with an overview of emerging technologies applied to the processing of residues generated from conventional crops and medicinal and aromatic plants. The bibliometric analysis reveals main valorization pathways, ranging from energy production to recovery of high-value bioactive compounds. Recent advances in this field are discussed in detail, with emphasis on low-energy and non-thermal processing (ultrasound, microwave, cold plasma), green solvents (natural deep eutectic solvents, bio-based solvents), biological pretreatments (with ligninolytic microorganisms and enzymes), thermochemical technologies (hydrothermal carbonization, pyrolysis), and emerging cascade strategies applied for multi-product recovery. Published research proves that these approaches have a great potential for sustainable valorization, while process optimization and economic feasibility remain a challenge at industrial scales for wider adoption. By providing an integrated perspective on diverse types of plant-based residues, this review highlights the importance of developing cascade and circular processing strategies, which align with global sustainability goals and encourage innovation in bio-based industries. New knowledge and advances in this field are highly required and will further help the transition of the current agri-food system towards greater circularity and sustainability.
- 1 February 2025
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 16 (8) , 3909-3923
Short-Term Microwave-Assisted Peroxide Treatment for Intensified Lignin and Sugar Recovery from Corncob
- 1 February 2025
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 16 (8) , 3909-3923
Short-Term Microwave-Assisted Peroxide Treatment for Intensified Lignin and Sugar Recovery from Corncob
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 28 (2) , 43-48
Plasma-assisted extraction of common nettle by-products for lactic acid fermentation
Nettle (Urtica dioica) is a wild plant rich in flavonoids, carotenoids, phytosterols, and terpenes. It has exceptional pharmaceutical potential due to its anti-inflammatory, antioxidant, and diuretic properties. It is used in food, as tea, or in the form of dry or liquid extracts. To improve the characteristics, bioavailability, and stability of extracts, extractions with environmentally acceptable solvents, green physical treatments, and fermentation with probiotic bacteria are used. Green solvents such as water, ethanol, and biocompatible eutectic liquids are suitable for obtaining extracts following the principles of sustainable development. Innovative physical treatments such as non-thermal plasma treatment can ensure better extraction and microbiological stability, especially of aqueous extracts. Also, bacterial fermentations, such as Ligilactobacillus salivarius, can metabolize the compounds present in the extracts and biotransform glycosides, tannin, and lignan into biologically active forms. In this paper, we examined the growth and antioxidant activity of aqueous extracts of nettle flowers obtained with non-thermal plasma treatment and subsequent fermentation with L. salivarius. A positive combined effect of non-thermal plasma and fermentation on increasing antioxidant activity was observed, especially during shorter treatments with non-thermal plasma. The results of the work indicate the possibility of applying green treatments and fermentation to obtain nettle flower extract products enriched with L. salivarius. Plasma treatment can also be used on the microbiological composition of water extracts, as an important aspect for application in the food and pharmaceutical industry.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 28 (2) , 43-48
Open AccessPlasma-assisted extraction of common nettle by-products for lactic acid fermentation
Nettle (Urtica dioica) is a wild plant rich in flavonoids, carotenoids, phytosterols, and terpenes. It has exceptional pharmaceutical potential due to its anti-inflammatory, antioxidant, and diuretic properties. It is used in food, as tea, or in the form of dry or liquid extracts. To improve the characteristics, bioavailability, and stability of extracts, extractions with environmentally acceptable solvents, green physical treatments, and fermentation with probiotic bacteria are used. Green solvents such as water, ethanol, and biocompatible eutectic liquids are suitable for obtaining extracts following the principles of sustainable development. Innovative physical treatments such as non-thermal plasma treatment can ensure better extraction and microbiological stability, especially of aqueous extracts. Also, bacterial fermentations, such as Ligilactobacillus salivarius, can metabolize the compounds present in the extracts and biotransform glycosides, tannin, and lignan into biologically active forms. In this paper, we examined the growth and antioxidant activity of aqueous extracts of nettle flowers obtained with non-thermal plasma treatment and subsequent fermentation with L. salivarius. A positive combined effect of non-thermal plasma and fermentation on increasing antioxidant activity was observed, especially during shorter treatments with non-thermal plasma. The results of the work indicate the possibility of applying green treatments and fermentation to obtain nettle flower extract products enriched with L. salivarius. Plasma treatment can also be used on the microbiological composition of water extracts, as an important aspect for application in the food and pharmaceutical industry.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 28 (1) , 1-6
Lignin removal from corncob by microwave-coupled peroxide treatment
Lignocellulosic biomass comprises the crop residues, which remain in large quantities from various stages of crop processing. Its main constituents, cellulose, hemicellulose, and lignin, are interlinked by hydrogen and covalent bonds and form a robust and intricate matrix making it resistant to enzymatic degradation. Pretreatment is crucial in lignocellulosic biomass processing, aiming to remove lignin and enhance enzyme access to polysaccharides. This study examines how microwave-assisted peroxide pretreatment affects the delignification of corncobs, aiming to enhance the efficiency of utilizing this agricultural residue in fermentation processes. Taguchi orthogonal array was used to optimize pretreatment conditions and assess the effects of individual parameters (temperature, H 2 O 2 dose, and pretreatment time) on delignification efficiency. The results showed the significant influence of pretreatment conditions on lignin removal from corncobs, with the highest delignification achieved at an H 2 O 2 dose of 500 mg/g, temperature of 100 °C, and pretreatment time of 2 minutes. H 2 O 2 dose had the most substantial impact on the delignification, followed by temperature and pretreatment time. The observed 81.6% delignification and 61.9% increase in cellulose content are pivotal for enzymatic hydrolysis efficiency. This improvement suggests enhanced enzyme availability during hydrolysis and reversible binding to polysaccharide active sites, potentially leading to higher sugar yields.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 28 (1) , 1-6
Open AccessLignin removal from corncob by microwave-coupled peroxide treatment
Lignocellulosic biomass comprises the crop residues, which remain in large quantities from various stages of crop processing. Its main constituents, cellulose, hemicellulose, and lignin, are interlinked by hydrogen and covalent bonds and form a robust and intricate matrix making it resistant to enzymatic degradation. Pretreatment is crucial in lignocellulosic biomass processing, aiming to remove lignin and enhance enzyme access to polysaccharides. This study examines how microwave-assisted peroxide pretreatment affects the delignification of corncobs, aiming to enhance the efficiency of utilizing this agricultural residue in fermentation processes. Taguchi orthogonal array was used to optimize pretreatment conditions and assess the effects of individual parameters (temperature, H 2 O 2 dose, and pretreatment time) on delignification efficiency. The results showed the significant influence of pretreatment conditions on lignin removal from corncobs, with the highest delignification achieved at an H 2 O 2 dose of 500 mg/g, temperature of 100 °C, and pretreatment time of 2 minutes. H 2 O 2 dose had the most substantial impact on the delignification, followed by temperature and pretreatment time. The observed 81.6% delignification and 61.9% increase in cellulose content are pivotal for enzymatic hydrolysis efficiency. This improvement suggests enhanced enzyme availability during hydrolysis and reversible binding to polysaccharide active sites, potentially leading to higher sugar yields.
- Open Access
- 1 January 2023
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 27 (2) , 47-52
Non-thermal plasma as a pretreatment for extraction of herbal tea by-products
Traditional extraction methods involve the use of polar solvents and/or high temperatures. Both are often energy or timeconsuming and require additional purification steps. This compromises the quality of the extracts obtained. Non-thermal plasma pretreatment for extraction is a promising technique that could increase the sustainability of the process while following the principles of hurdle technology. In this work, we investigated the effects of plasma treatment on the aqueous extraction of antioxidant compounds from herbal tea by-products. Stinging nettle, hoary willowherb, and St. John's Wort extracts were treated with plasma at different time intervals. The extracts obtained were analyzed for their antioxidant capacity and total phenolic content. Their potential use as growth media for Ligilactobacillus sp. was also investigated. Hoary willowherb extracts showed the highest total phenolic content and antioxidant activity. While plasma treatment slightly decreased the antioxidant capacity of these extracts, it improved microbial growth. In contrast to hoary willowherb, the antioxidant capacity of stinging nettle extracts' was not affected by plasma treatment. These extracts were also better for bacterial growth. When added to 25% v/v Mrs broth, stinging nettle extracts achieved a growth rate similar to that of pure Mrs broth (~10⁹ CFU/ml), demonstrating their potential for microbial biomass production and food and feed supplementation.
- 1 January 2023
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 27 (2) , 47-52
Open AccessNon-thermal plasma as a pretreatment for extraction of herbal tea by-products
Traditional extraction methods involve the use of polar solvents and/or high temperatures. Both are often energy or timeconsuming and require additional purification steps. This compromises the quality of the extracts obtained. Non-thermal plasma pretreatment for extraction is a promising technique that could increase the sustainability of the process while following the principles of hurdle technology. In this work, we investigated the effects of plasma treatment on the aqueous extraction of antioxidant compounds from herbal tea by-products. Stinging nettle, hoary willowherb, and St. John's Wort extracts were treated with plasma at different time intervals. The extracts obtained were analyzed for their antioxidant capacity and total phenolic content. Their potential use as growth media for Ligilactobacillus sp. was also investigated. Hoary willowherb extracts showed the highest total phenolic content and antioxidant activity. While plasma treatment slightly decreased the antioxidant capacity of these extracts, it improved microbial growth. In contrast to hoary willowherb, the antioxidant capacity of stinging nettle extracts' was not affected by plasma treatment. These extracts were also better for bacterial growth. When added to 25% v/v Mrs broth, stinging nettle extracts achieved a growth rate similar to that of pure Mrs broth (~10⁹ CFU/ml), demonstrating their potential for microbial biomass production and food and feed supplementation.
- Open Access
- 1 January 2022
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 26 (2) , 52-56
Effect of non-thermal plasma on cellulose crystallinity and lignin content in corn stalks
Lignocellulosic biomass is a cheap raw material that, thanks to its high carbohydrate content, can be used in fermentation to produce biofuels, biogas and other compounds. Its complex structure, including cellulose, hemicellulose and lignin, requires prior treatment of the biomass to facilitate hydrolysis to simple sugars. Today, biomass is only partially utilized and generates about 14% of the world's energy. This is because the most commonly used physical, chemical and physicochemical treatments are not sustainable. They are energy-consuming but still low in productivity and toxic inhibitors formed during these treatments could hinder later steps of fermentation. Biomass treatment with advanced oxidation techniques has great potential as an environmentally friendly, so-called "green" treatment. These processes generate reactive species (radicals, electrons, ions and peroxides) that attack cellulose, hemicellulose, and lignin components. In this work, the effects of non-thermal plasma, the Fenton process, and the combined treatment of corn stalks with non-thermal plasma/Fenton were compared. Grounded biomass of corn stalks was mixed with Fenton reagent and hydrogen peroxide at different ratios and subjected to non-thermal plasma treatment. Carbohydrate content was decreased in non-thermal plasma treated samples both with and without Fe2+. However, a specific biomass: Fe2+:H2O2 ratio was required to achieve the highest rate of lignocellulose decomposition. The cellulose and hemicellulose fractions were affected and reduced by the treatments studied but resulted in almost no changes in the cellulose crystallinity index. The lower lignin content and cellulose crystallinity allow for more efficient enzyme hydrolysis of the treated lignocellulose and new options for valorization in fermentations.
- 1 January 2022
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 26 (2) , 52-56
Open AccessEffect of non-thermal plasma on cellulose crystallinity and lignin content in corn stalks
Lignocellulosic biomass is a cheap raw material that, thanks to its high carbohydrate content, can be used in fermentation to produce biofuels, biogas and other compounds. Its complex structure, including cellulose, hemicellulose and lignin, requires prior treatment of the biomass to facilitate hydrolysis to simple sugars. Today, biomass is only partially utilized and generates about 14% of the world's energy. This is because the most commonly used physical, chemical and physicochemical treatments are not sustainable. They are energy-consuming but still low in productivity and toxic inhibitors formed during these treatments could hinder later steps of fermentation. Biomass treatment with advanced oxidation techniques has great potential as an environmentally friendly, so-called "green" treatment. These processes generate reactive species (radicals, electrons, ions and peroxides) that attack cellulose, hemicellulose, and lignin components. In this work, the effects of non-thermal plasma, the Fenton process, and the combined treatment of corn stalks with non-thermal plasma/Fenton were compared. Grounded biomass of corn stalks was mixed with Fenton reagent and hydrogen peroxide at different ratios and subjected to non-thermal plasma treatment. Carbohydrate content was decreased in non-thermal plasma treated samples both with and without Fe2+. However, a specific biomass: Fe2+:H2O2 ratio was required to achieve the highest rate of lignocellulose decomposition. The cellulose and hemicellulose fractions were affected and reduced by the treatments studied but resulted in almost no changes in the cellulose crystallinity index. The lower lignin content and cellulose crystallinity allow for more efficient enzyme hydrolysis of the treated lignocellulose and new options for valorization in fermentations.
- 1 January 2020
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 24 (2) , 57-61
Effect of lactic acid fermentation on the quality of brewer's spent grain as ruminant feed
Brewer's spent grain (BSG) was used in this study as a support for the immobilization of Lactobacillus paracasei NRRL B-4564, thus enabling the recirculation of immobilized biomass in repeated-batch fermentation. The chemical composition and the energy parameters of the fermented and non-fermented BSG were analyzed and compared. Moreover, the probiotic features of L. paracasei were analyzed to examine the possibility of using fermented BSG as a functional ingredient in ruminant diets. The results obtained indicate that the fermented BSG had significantly higher protein and ash contents, as well as a significantly lower content of fiber fractions. Furthermore, the fermentation process increased the BSG energy content. The analysis of probiotic potential revealed a high tolerance of L. paracasei to pH 2.5 and bovine bile, autoaggregation ability and antimicrobial activity, suggesting that the fermented BSG with immobilized microbial biomass can be used as functional feed in ruminant diets.
- 1 January 2020
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal on Processing and Energy in Agriculture
- Vol. 24 (2) , 57-61
Effect of lactic acid fermentation on the quality of brewer's spent grain as ruminant feed
Brewer's spent grain (BSG) was used in this study as a support for the immobilization of Lactobacillus paracasei NRRL B-4564, thus enabling the recirculation of immobilized biomass in repeated-batch fermentation. The chemical composition and the energy parameters of the fermented and non-fermented BSG were analyzed and compared. Moreover, the probiotic features of L. paracasei were analyzed to examine the possibility of using fermented BSG as a functional ingredient in ruminant diets. The results obtained indicate that the fermented BSG had significantly higher protein and ash contents, as well as a significantly lower content of fiber fractions. Furthermore, the fermentation process increased the BSG energy content. The analysis of probiotic potential revealed a high tolerance of L. paracasei to pH 2.5 and bovine bile, autoaggregation ability and antimicrobial activity, suggesting that the fermented BSG with immobilized microbial biomass can be used as functional feed in ruminant diets.
- 3 October 2019
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 43 (12)
Effects of caraway and juniper essential oils on aflatoxigenic fungi growth and aflatoxins secretion in polenta
- 3 October 2019
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 43 (12)
Effects of caraway and juniper essential oils on aflatoxigenic fungi growth and aflatoxins secretion in polenta
- 1 July 2019
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 108, 238-252
Towards sustainability of lactic acid and poly-lactic acid polymers production
- 1 July 2019
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 108, 238-252
Towards sustainability of lactic acid and poly-lactic acid polymers production