VKVladimir Konovalov

Vladimir Konovalov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Vladimir Konovalov has a total of 130 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • FUNCTIONAL DIAGRAM OF THE MIXER WITH A CIRCULATING MODE OF OPERATION OF THE WORKING ORGANS

    by Tatyana Kovaleva, Vladimir Konovalov, Sergey Vedishchev, Alexander Terekhov, Andrey Konev, Andrey Papikhin

    Mixing various mixtures is widely used in both industry and agriculture, and the wide variety of mixer working elements is noteworthy. An analysis of mixers with various working elements, including their process parameters, is conducted. The demand for mixers with flexible working elements for bulk materials, as well as mixers for mixing liquid and paste components, is noted. Based on a review of mixer types, the influence of the type of main working element on the homogeneity of the mixture obtained with it, its optimal kinematic mode, and the required mixing duration is determined. The aim of this study is to develop a functional diagram of a mixer that will allow for the integration of various working elements into a single, interconnected device. The operational advantages and disadvantages of the working elements are considered. Attention is paid to both the magnitude of energy consumption and its components. Several articles have identified the influence of the mass of the prepared batch, the duration of the mixer cycle, and the power consumed during the mixing stages on the total energy consumption of mixture preparation. A sequence of steps for step-by-step mixing was established. The nature of changes in the process parameters is examined in the paper. The mixer's key parameters include mix quality, specific energy consumption, installed capacity, and throughput, determined by the mass of the mix portion and the mixing cycle time. The functional diagrams of mixing units performing mixing and transport operations simultaneously and separately were compared. A promising scheme for mixing with circulating mixing was determined. An analysis of the sequence of mix movement within the proposed mixer allowed us to propose a structural diagram for mixing concentrated feed. The proposed diagram shows how the various working elements of the mixer are connected into a single, interconnected unit.

  • Open Access

    Algorithmization of Interpolation Model Methods in Processing Experimental Results

    by Vladimir V. Konovalov, Alexander V. Moiseev, Vladimir Yu. Zaitsev, Marina V. Dontsova

    Introduction. To solve the problem of bringing together the results of different experimental designs into a single regression model it is necessary to develop the methods for designing experiments, assessing the influence of intervals and levels of variation of the studied factors on the possible behavior of changes in process indicators, and to have the ability to compile (combine) the results of several sequential series of studiesinto a single system. The use of numerical methods and calculation technologies, and computerized management of technological machines, will allow adjusting rapidly their operating parameters at complex interplay of factors. Aim of the Study. The study is aimed at algorithmizing the methodology for developing interpolation models when used for automated processing of the results of experimental studies using the mathematical experiment design theory and compilation of the models. Materials and methods. In the study, there was used the methodology for the analytical substantiation of expressions of interpolation functions describing the nature of indicator changes within the boundaries under consideration based on the results of previously completed studies, the development of a procedure for carrying out activities related to planning an experiment and obtaining interpolation expressions and computer models. Results. There have been substantiated and implemented activities for developing a model combining a linear multifactor model and a particular function of one of the factors (the influence of the drum dispenser rotation frequency on its capacity). Discussion and Conclusion. The implemented activities allowed us to recommend the following sequence of actions: implementing a full-factorial design for several coded factors with developing the process linear model, determining the preferred zone of their use; implementing an additional series of single-factor experiments within the previously investigated coded interval of the factor under study and the subsequent finding of the functional dependence of the process indicator on this factor; developing a computer program for combining the functions of both series of studies for the substitution of partial functions of the natural indicators of the factors into a multifactorial linear model of coded factors; determining the nature and numerical values of the process indicator for all factor values in order to use the results for further calculations in the mathematical description of the studied device operation, for example, a continuous mixer. The combination of linear multifactorial design models and different versions of functions of specific variables (factors), implemented as a computer model, makes it possible to obtain a complicated multifactorial dependence, which looks linear in the coded coordinates of the factors, and the partial values of the process indicator within the section of the multifactorial experiment design (–1; +1) are described by partial functions with current natural coordinates.

  • Open Access

    Experimental studies of aerosol cloud parameters of human-expelled aerosol cloud

    by Natalia Parfentieva, Sergey Gavrilin, Vladimir Konovalov, Soniya Efremova

    The study developed an experimental methodology to characterize the volumetric velocity field and frontal geometry of exhaled air clouds containing aerosol parti-cles. The research focused on establishing the movement patterns of air expelled during human respiratory activities (speaking, sneezing, coughing) to identify potential infection zones. The experimental approach incorporated video re-cording of exhaled air dynamics under various conditions, followed by computational processing and modeling. The methodology included derivation of analytical formulas for data processing, description of experimental data analysis tech-niques, and temporal evolution analysis of results. The proposed method will allow the determination of aerosol cloud geometry, propagation velocity, and direc-tional characteristics through video analysis. Time-resolved imaging at 1/25-second intervals permits detailed study of geometric and velocity field dynamics. Computational transformation of results into vector format was achieved through specialized algorithms. Analysis revealed complex airflow patterns within mov-ing aerosol clouds, including recirculation components characteristic of turbulent flow regimes. Distinct cloud geometries were identified for different expulsion mechanisms (speech, sneeze, cough). The methodology provides foundational data for computational modeling of respiratory particle dispersion and infection risk.

  • Open Access

    Numerical analysis of the influence of dispenser setting error on the performance of the mixing unit

    by Vyacheslav P. Teryushkov, Ilya A. Shcherbakov, Andrey A. Gunin, Vladimir V. Konovalov, Ilya S. Mironov, Терюшков Вячеслав Петрович, Щербаков Илья Андреевич

    The purpose of the study is to establish a number of methods for accurately adjusting the section of a multicomponent dispenser to change the composition of the mixture and the productivity of a mixing unit with a continuous nature of operation. The objectives of the research include a theoretical determination of the influence of errors when setting up dispensers on the performance of the mixing unit and the mixture recipe, taking into account the proportion of the controlled component in the mixture. The research methodology provides for a numerical and graphical analysis of the influence of factors on the value under study, and for numerical studies, modeling in the MatchCAD mathematical package is used. Setting the dispensers for supplying mixture components to the dispensing rate is an important factor in both ensuring the quality of the mixture and the performance of the mixing unit, which affects the volume and duration of operation of the equipment. The share of the component in the mixture practically does not change when the recipe share of the component is up to 10% when studying the influence of the dispenser setting error. When the recipe share of a component is more than 20%, the share of the component in the mixture and the error in the mixture recipe tend to linearity. The absolute error of the mixture formulation does not change significantly when the proportion of the controlled component is more than 25%. In this case, with an increase in the proportion of the control component, the influence of the dispenser error increases. The relative error has an inverse relationship. With increasing proportion of the controlled component, a decrease in the relative error of the component content in the mixture is observed. Considering that the majority of the components of the mixture make up a share of 10-25% of the composition of the mixture, for a given range of the share of the controlled component, the value of the relative error of the mixture formulation in numerical values practically corresponds to the percentage of the dispenser error. With an increase in the proportion of the controlled component, a slight gradual decrease in the relative error of the component content in the mixture is observed.

  • Optimization of loading of machines in production areas for parts manufacturing

    by Penza State Technological University, Vladimir V. Konovalov, Marina V. Dontsova, Aleksandr N. Rasstegaev, Vladimir Yu. Zaitsev

    Background. The purpose of the research is to develop a computer model for optimizing the loading of machines of the same classification group, but of different types, of the existing fleet of technological equipment of the enterprise. Materials and methods.The research provided for the development of a calculation methodology and algorithm implemented in the MatchCAD mathematical package in the form of a computer model for comparative evaluation and optimization of calculating the number of parts processed by machines of different types based on the limitations available in production. Results. The developed technique made it possible to create a calculation algorithm based on it. The implemented computer model in the MatchCAD mathematical package allows optimizing the values of the number of parts processed in each group, but with machines of different types, by alternately optimizing to minimize operating costs, to minimize energy consumption and to minimize labor costs. Conclusions. The found difference in values between the option of the minimum production cycle for the manufacture of a batch of parts and the display is stable.

  • Open Access

    To the justification of the direction for improving the design of a bulk material belt dispenser

    by Anton A. Popkov, Vladimir V. Konovalov, Vladimir Yu. Zaitsev, Marina V. Dontsova

    The purpose of the research is to reduce the dosing error of belt dispensers of bulk materials. The theoretical research methodology involved studying, using numerical methods, the pattern of changes in the dosing error when varying the design parameters of the dispenser and the indicators of its operating process. The preparation of composites and mixtures requires ensuring proportions between their components. Violation of proportions causes a change in the properties of the composite and/or a decrease in the quality of the mixture. The most accurate way to maintain the weight of a portion of components is with batch scale batchers. However, in this case, the energy costs for distributing the components throughout the entire volume of the prepared mixture are high. Continuous weight dosing allows you to reduce the energy consumption of mixture formation through the use of continuous mixers. The use of continuous weighing feeders requires a set of measures to improve their accuracy of adjustment to a given performance. Increasing the dosing accuracy in the event of dispenser setting errors requires improving the design of continuous belt-type dispensers in the direction of increasing the speed of the belt and compacting the material in the dosing zone. Increasing the active area of the unloading opening contributes to the possibility of increasing the speed of the belt. An increase in the height of the dosed layer on the tape helps to reduce the dosing error. When the ratio of the opening width to its height is 4, the performance error is 0.2 (20%) when adjusting the performance by window height with an error of 1 mm; with the specified ratio equal to 1, the performance error is 0.1; with the specified ratio equal to 0.5, the performance error is 0.05. Additional active working elements in the dosing zone will allow you to increase the height of the dosed layer of material.


  • Open Access

    Static characteristic of angular velocity measuring transducer for adaptive control systems of hydraulic drives

    by В. В. Голубовский, N. A. Simanin, V. V. Konovalov

    The aim of the research is to obtain the static characteristic of the angular velocity measuring transducer of the developed design and to determine its design parameters. The research methodology provides theoretical substantiation of the static characteristic of the proposed angular velocity measuring transducer with inertial flap and nozzles. The paper considers the principle of operation of various designs of measuring transducers of angular velocity with inertial masses. The variant of constructive execution of angular velocity measuring transducer with inertial flap and nozzles is substantiated, for which the static characteristic is obtained. On the basis of the obtained expressions the main design parameters of the device are determined. The methodology of calculation of static characteristic of angular velocity measuring transducers in the adaptive control system of hydraulic drive is considered. The obtained expression of the static characteristic of the proposed design of the angular velocity measuring transducer connects the external disturbing influence (angular velocity) and the pressure drop in the interthrottle chambers in the steady-state mode of operation. The recommended parameters of the elements of the angular velocity transducer are: nozzle orifice diameter in the range of 0.5–1.5 mm, nozzle face diameter in the range of 1.2–1.5 nozzle orifice diameter, flap stroke up to 0.1 nozzle orifice diameter. It should be noted that at diameters of permanent throttle and nozzle orifices less than 0.5 mm, as well as at the flap movement less than 0.02 mm, obliteration may occur, i.e. overgrowing of resistance passage sections by polarised liquid molecules, which breaks the performance of the angular velocity transducer. The obtained expression of the static characteristic of the proposed design of the angular velocity transducer with an inertial flap and nozzles allows us to determine the design parameters of its elements and, on their basis, the dynamic characteristics.

  • Open Access

    JUSTIFICATION OF A PROMISING FUNCTIONAL SCHEME OF A GRAIN CRUSHER

    by Valery E. Chuikov, Vladimir V. Konovalov, Marina V. Dontsova, Svetlana S. Petrova, Чуйков Валерий Евгеньевич

    The purpose of the research is to develop a promising functional scheme of the working process of a grain crusher and its general design scheme. The research methodology provides an analytical substantiation of the rational se-quence of operations of the crusher workflow. Analysis of the sequence of operations of working processes of exist-ing grain crushers made it possible to identify differences in the list and order of operations of working processes for different types of crushes. The general promising design and functional scheme of grain crushers provides for the presence of sections (zones) such as crusher loading, preliminary (mesh) cleaning; accumulation of grain, its dosing, final cleaning, distribution across the cross-section of the loading neck of the crusher (if necessary), grinding the grain and unloading the finished product. For free-standing grain crushers, the preferred option is spaced grain cleaning, when large-sized inclusions are separated by a mesh when loading the storage hopper, and metal particles after the dispenser are separated by a magnet. This option is the most acceptable, because the “pass” mesh cleaning allows to remove stones and threads, and a thin layer of grain on the surface of the magnet makes it easier to collect metal contaminants. The performance of the mesh cleaning must be matched to the performance of the crusher's grain loading system, which has higher feed rates than the crusher. The dispenser must ensure loading of the crushing device of the crusher on all types of crops, the grain of which is to be crushed. The performance of the magnetic sep-arator is linked to the maximum performance of the feed dispenser at the grinding device. For cone grinders, the load-ing zone is a ring, so the design must ensure the supply of grain over the entire area of the loading opening of the grinding zone. The most effective is stepwise grinding of the product, implemented in grateless hammer crushers and inertia-free cone crushers. This prevents over-grinding of grain particles and reduces inefficient energy consumption during crushing. The use of chipping particles from the original grains makes it possible to further reduce energy costs due to the absence of imparting kinetic energy to the grains and their subsequent inhibition and the absence of the need for particle segregation.


  • THEORETICAL JUSTIFICATION OF THE ROTATION FREQUENCY OF THE BLADE LOADER IN THE CIRCULATION MIXER

    by Tambov State Technical University, Maxim Vyguzov, Sergey Vedishchev, Vladimir Zaitsev, Penza State Technological University, Vladimir Konovalov

    The purpose of the research is to substantiate the critical rotation speed of the working body based on force analysis and modeling of the movement of particles of a bulk product in a horizontal loader with radial blades located in a circulation mixer. The research methodology involved substantiating the maximum rotation speed of the loader working body based on an analysis of the forces acting on particles as they move by the loader blades and fall into the tray during flight. Based on the obtained expressions, the values of the indicators were modeled to analyze and substantiate rational values. The implementation of a numerical analysis of the obtained expressions based on force analysis and process modeling with the Mathcad mathematical package made it possible to identify the critical values of the rotation speed of the working body of a paddle loader based on the condition for the possibility of material coming off the blade and the condition for the possibility of particles flying from the blade into the receiving tray. Due to the need for material to flow off the blades and the rotation speed reduction factor of 0.9, the rotation speed of a blade loader with an outer diameter of blades of 0.24 m and an inner diameter of 0.17 m should not exceed 77 min-1 . The highest rotation speed of the working body shaft at which particles of material will enter the receiving tray area from the outer end of the blade is 43 min-1 , and from the inner end - 73 min-1 . In the process of manufacturing a circulating mixer with a radial blade loader for experimental studies, it should be possible to change the rotation speed up to 43 min-1 . To test theoretical principles in exploratory experiments, it is necessary to provide for the possibility of changing the rotation speed of the blade loader shaft to 70 min-1 .

  • On Methods for Determining the Moisture Content of Materials in a Confined Medium

    by Natalia Parfentieva, Marina Panfilova, Vladimir Konovalov, Soniya Efremova