Denis Tarasov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Denis Tarasov has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Vladimir Konovalov
Penza State Technological University
5 shared publications - Vladimir Zaitsev
Penza State Technological University
4 shared publications - Yuri Rodionov
Tambov State Technical University
2 shared publications Roman Mamonov
The Academy of Law Management of the Federal Penitentiary Service of Russia, Sennaya str., 1, Ryazan, 390000, Russia
1 shared publicationVladimir Nekrashevich
Ryazan State Agrotechnological University, Kostychev str., 1, Ryazan, 390044, Russia
1 shared publication- Yuri Viktorovich Rodionov
Department of Mechanics and Engineering Graphics, Tambov State Technical University, 392000 Tambov, Russia
1 shared publication
Latest Publications
- Open Access
- 9 September 2025
- Published by Peoples' Friendship University of Russia in Structural Mechanics of Engineering Constructions and Buildings
- Vol. 21 (3) , 216-230
Optimization of Section Parameters of Finite Stiffness Cable Under Transverse Impact
A cable of finite stiffness is a model for a wide range of load-bearing structures, such as large-span suspended roofs of public and industrial buildings. At the same time, a new class of engineering structures has appeared relatively recently, designed to create an insurmountable physical obstacle to unauthorized movement of vehicles. The main elements that ensure the overall strength and rigidity of such structures are ring-shaped steel sections, which resist lateral impact. In this regard, there is a need to solve problems of optimal design of these elements. The objective of this study is to create a method that allows setting and solving the designated problems. The developed method is based on single-criterion multiparameter conditional optimization, the Bubnov-Galerkin method, as well as integral and differential calculus of multivariate functions. Verification of the proposed modeling technology is carried out. Discrepancies in the values of the adopted criteria for assessing the accuracy of the obtained results stay within the permissible errors in solving engineering problems. Using the developed method, the studies were conducted and the influence of the ratio of the internal to external diameter of the ring section on the weight and size characteristics, as well as the behavior of the bending-rigid cable under the action of a short-term dynamic load was revealed.
- 9 September 2025
- Published by Peoples' Friendship University of Russia in Structural Mechanics of Engineering Constructions and Buildings
- Vol. 21 (3) , 216-230
Open AccessOptimization of Section Parameters of Finite Stiffness Cable Under Transverse Impact
A cable of finite stiffness is a model for a wide range of load-bearing structures, such as large-span suspended roofs of public and industrial buildings. At the same time, a new class of engineering structures has appeared relatively recently, designed to create an insurmountable physical obstacle to unauthorized movement of vehicles. The main elements that ensure the overall strength and rigidity of such structures are ring-shaped steel sections, which resist lateral impact. In this regard, there is a need to solve problems of optimal design of these elements. The objective of this study is to create a method that allows setting and solving the designated problems. The developed method is based on single-criterion multiparameter conditional optimization, the Bubnov-Galerkin method, as well as integral and differential calculus of multivariate functions. Verification of the proposed modeling technology is carried out. Discrepancies in the values of the adopted criteria for assessing the accuracy of the obtained results stay within the permissible errors in solving engineering problems. Using the developed method, the studies were conducted and the influence of the ratio of the internal to external diameter of the ring section on the weight and size characteristics, as well as the behavior of the bending-rigid cable under the action of a short-term dynamic load was revealed.
- Open Access
- 30 May 2024
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 19 (5) , 729-739
Численное и экспериментальное исследование поведения защитного сооружения при ударном воздействии
Численное и экспериментальное исследование поведения защитного сооружения при ударном воздействии
- 30 May 2024
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 19 (5) , 729-739
Open AccessЧисленное и экспериментальное исследование поведения защитного сооружения при ударном воздействии
Численное и экспериментальное исследование поведения защитного сооружения при ударном воздействии
- Open Access
- 10 February 2023
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 49 (4) , 169-176
Applying conditional optimization to determine the allowable loads on flexurally rigid threads
Objective.Development of a methodology for determining the allowable loads on existing structural elements, the design model of which is a flexural-rigid thread, based on the requirements of strength and rigidity due to the changed operating conditions of structures.Method.This study is based on mathematical modeling of the problem of conditional optimization. The objective function is the total potential energy of deformation of a thread with some flexural rigidity. In this case, restrictions are imposed on strength, rigidity, and the condition of continuity of deformations. At the same time, to achieve this goal, the provisions of the strength of materials, as well as the apparatus of integral and differential calculation of functions of one or more variables, were used.Result.An assessment of the adequacy of the results obtained using the developed methodology was carried out. A numerical experiment was performed to determine the value of the allowable uniformly distributed load and the corresponding distribution of stresses and strains along the length of a thread of finite stiffness with given physical and geometric parameters. It has been established that the discrepancies in the values of the results obtained using the proposed modeling technology and the commercial computer-aided design and calculation system LIRA 10.8, implemented on the generally recognized finite element method, are no more than 5%.Conclusion.The developed technique allows setting and solving problems of determining the ultimate loads on flexural-rigid threads, based on the allowable stresses and strains, in contrast to existing commercial computer simulation systems that solve exclusively direct problems of determining the stress-strain state of various types of structures. It can be used at the stage of inspection of large-span coatings in the reconstruction of public buildings and engineering structures.
- 10 February 2023
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 49 (4) , 169-176
Open AccessApplying conditional optimization to determine the allowable loads on flexurally rigid threads
Objective.Development of a methodology for determining the allowable loads on existing structural elements, the design model of which is a flexural-rigid thread, based on the requirements of strength and rigidity due to the changed operating conditions of structures.Method.This study is based on mathematical modeling of the problem of conditional optimization. The objective function is the total potential energy of deformation of a thread with some flexural rigidity. In this case, restrictions are imposed on strength, rigidity, and the condition of continuity of deformations. At the same time, to achieve this goal, the provisions of the strength of materials, as well as the apparatus of integral and differential calculation of functions of one or more variables, were used.Result.An assessment of the adequacy of the results obtained using the developed methodology was carried out. A numerical experiment was performed to determine the value of the allowable uniformly distributed load and the corresponding distribution of stresses and strains along the length of a thread of finite stiffness with given physical and geometric parameters. It has been established that the discrepancies in the values of the results obtained using the proposed modeling technology and the commercial computer-aided design and calculation system LIRA 10.8, implemented on the generally recognized finite element method, are no more than 5%.Conclusion.The developed technique allows setting and solving problems of determining the ultimate loads on flexural-rigid threads, based on the allowable stresses and strains, in contrast to existing commercial computer simulation systems that solve exclusively direct problems of determining the stress-strain state of various types of structures. It can be used at the stage of inspection of large-span coatings in the reconstruction of public buildings and engineering structures.
- 16 November 2022
- Published by Springer Nature
- p. 927-936
Simulation Results for Optimization of Load of Flexible Threads Rotating on a Rotor
- 16 November 2022
- Published by Springer Nature
- p. 927-936
Simulation Results for Optimization of Load of Flexible Threads Rotating on a Rotor
- Open Access
- 1 December 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 403 (1) , 012118
Effect of deformation on the stress-strain state of a honey extraction centrifuge flexible thread
Composite materials are becoming increasingly useful in engineering practice. They allow considering work aspects in the elastoplastic field. This is especially important for the systems that are modeled on geometric non-linearity. These systems include constructions which bearing capacity is provided by flexible threads, such as wires in bee honeycombs. An example of such a construction is the described centrifuge for honey or beebread mass extraction from a honeycomb (honey extractor), using frames for honeycombs with reinforced flexible wire. Comparative studies were conducted using previously tested computer programs based on the methods of linear and non-linear calculation of flexible wires. The deformation values of flexible wires were determined with consideration of the rotation frequency of the centrifuge rotor. The diagrams of changes in maximum expansion stresses, elongation of the wire, sagging of the flexible wire, the moment of inertia of the elastic body, equivalent loads for the methods of linear and non-linear calculation of flexible wires at different rotor rotation frequency were developed. When modeling objects with a rotating flexible wire, it is possible to use methods of both physically non-linear calculation and more simple and accessible linear calculation. Using the latter method, the calculation results should be divided by nonlinearity coefficient.
- 1 December 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 403 (1) , 012118
Open AccessEffect of deformation on the stress-strain state of a honey extraction centrifuge flexible thread
Composite materials are becoming increasingly useful in engineering practice. They allow considering work aspects in the elastoplastic field. This is especially important for the systems that are modeled on geometric non-linearity. These systems include constructions which bearing capacity is provided by flexible threads, such as wires in bee honeycombs. An example of such a construction is the described centrifuge for honey or beebread mass extraction from a honeycomb (honey extractor), using frames for honeycombs with reinforced flexible wire. Comparative studies were conducted using previously tested computer programs based on the methods of linear and non-linear calculation of flexible wires. The deformation values of flexible wires were determined with consideration of the rotation frequency of the centrifuge rotor. The diagrams of changes in maximum expansion stresses, elongation of the wire, sagging of the flexible wire, the moment of inertia of the elastic body, equivalent loads for the methods of linear and non-linear calculation of flexible wires at different rotor rotation frequency were developed. When modeling objects with a rotating flexible wire, it is possible to use methods of both physically non-linear calculation and more simple and accessible linear calculation. Using the latter method, the calculation results should be divided by nonlinearity coefficient.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 470-474
Mathematical Modeling of the Stress-Strain State of a Flexible Thread under the Action of Transverse Impact
Energy method for calculating a flexible thread for a short-term transverse load given by the impetus of striking body is proposed in the paper. The displacements of the studied geometrically nonlinear system, as well as the internal forces arising in it, are determined by the General theorem of dynamics, namely the law of energy conservation. Moreover, the calculation determines the value of the equivalent static load to the impact that occurs due to the kinetic energy of the striking body interacting with the structure. This load is limited by the initial amount of body kinetic energy and its value and the law of change from time to time depended on the physical and geometric parameters of the flexible thread. To perform the dynamic calculation by the proposed method, the flexible thread model is reduced to an equivalent system with one degree of freedom.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 470-474
Mathematical Modeling of the Stress-Strain State of a Flexible Thread under the Action of Transverse Impact
Energy method for calculating a flexible thread for a short-term transverse load given by the impetus of striking body is proposed in the paper. The displacements of the studied geometrically nonlinear system, as well as the internal forces arising in it, are determined by the General theorem of dynamics, namely the law of energy conservation. Moreover, the calculation determines the value of the equivalent static load to the impact that occurs due to the kinetic energy of the striking body interacting with the structure. This load is limited by the initial amount of body kinetic energy and its value and the law of change from time to time depended on the physical and geometric parameters of the flexible thread. To perform the dynamic calculation by the proposed method, the flexible thread model is reduced to an equivalent system with one degree of freedom.
- Open Access
- 1 July 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1278 (1)
Mathematical modeling of deformations of flexible threads under their dynamic loading in the zone of material plasticity
The object of study is a vertical flexible thread rotating at some distance around a vertical axis with a lateral load. The calculation is made for the dynamic load condition in the form of centrifugal forces depending on the displacement of the thread from the initial position. The geometric and physical nonlinearity of the flexible threads is taken into account. The proposed method is based on the theory of mathematical modeling using differential and integral calculus of functions of one and several variables as well as on the theory of resistance of materials. A method of the nonlinear calculation of the stress-strain state of flexible threads, taking into account the real properties of materials is proposed. The text of the calculation in the computer program MatchCAD for calculations of the thread, its deformation and tension was theoretically described and developed. The calculation results corresponded to the results obtained by the finite element method (the discrepancy is about 1%). The implementation of the method makes it possible to study the operation of structures outside the conditions of elastic work of the material. The comparative results of modeling inertia loaded rotating threads with linear properties of changes in their strength properties and in the case of nonlinearity of their properties are presented.
- 1 July 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1278 (1)
Open AccessMathematical modeling of deformations of flexible threads under their dynamic loading in the zone of material plasticity
The object of study is a vertical flexible thread rotating at some distance around a vertical axis with a lateral load. The calculation is made for the dynamic load condition in the form of centrifugal forces depending on the displacement of the thread from the initial position. The geometric and physical nonlinearity of the flexible threads is taken into account. The proposed method is based on the theory of mathematical modeling using differential and integral calculus of functions of one and several variables as well as on the theory of resistance of materials. A method of the nonlinear calculation of the stress-strain state of flexible threads, taking into account the real properties of materials is proposed. The text of the calculation in the computer program MatchCAD for calculations of the thread, its deformation and tension was theoretically described and developed. The calculation results corresponded to the results obtained by the finite element method (the discrepancy is about 1%). The implementation of the method makes it possible to study the operation of structures outside the conditions of elastic work of the material. The comparative results of modeling inertia loaded rotating threads with linear properties of changes in their strength properties and in the case of nonlinearity of their properties are presented.
- Open Access
- 1 August 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1084 (1) , 012008
Mathematical modeling of the stress-strain state of flexible threads with regard to plastic deformations
The object of the study is the main power elements of mechanical systems made of flexible threads working on the perception of transverse loads. The paper focuses on the calculating the stress-strain state of a flexible thread with nonlinear elasticity by means of MathCAD program based upon geometric and physical nonlinearity of flexible threads. The proposed method is based on mathematical modeling theory including differential and integral calculation of one and several variables functions, as well as on the points of materials strength. We propose a method for nonlinear calculation of the stress-strain state of flexible threads taking into account the real properties which may be introduced to study the work of structures outside the elastic work of the material. Comparison of the parameters of the stress-strain state of a flexible thread obtained with the help of a digital experiment in a computer program, also with the results obtained by the finite element method, confirmed the adequacy of the proposed method and the method of mathematical modeling. Divergences in the values of the calculated parameters were no more than 5%.
- 1 August 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1084 (1) , 012008
Open AccessMathematical modeling of the stress-strain state of flexible threads with regard to plastic deformations
The object of the study is the main power elements of mechanical systems made of flexible threads working on the perception of transverse loads. The paper focuses on the calculating the stress-strain state of a flexible thread with nonlinear elasticity by means of MathCAD program based upon geometric and physical nonlinearity of flexible threads. The proposed method is based on mathematical modeling theory including differential and integral calculation of one and several variables functions, as well as on the points of materials strength. We propose a method for nonlinear calculation of the stress-strain state of flexible threads taking into account the real properties which may be introduced to study the work of structures outside the elastic work of the material. Comparison of the parameters of the stress-strain state of a flexible thread obtained with the help of a digital experiment in a computer program, also with the results obtained by the finite element method, confirmed the adequacy of the proposed method and the method of mathematical modeling. Divergences in the values of the calculated parameters were no more than 5%.