BVB. Vinod

B. Vinod

*This is an algorithmically generated author record based on publicly available information.

B. Vinod has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hybrid GRA –Machine Learning Framework for Surface and Performance Optimization of Ti 49. 3 Ni 50 .7 SMA in Biomedical Applications

    by Adik M. Takale, Uday A. Dabade, Mukesh Kumar, B. Vinod, Manjunath G. Avalappa, Uttam U. Deshpande, Kishor K. Powar

    Shape memory alloys (SMAs), such as Ti49.3Ni50.7, are well known for their remarkable mechanical and biocompatibility with human bone tissues. Thus, creating research opportunities in innovative machining processes using these alloys to design high‐quality biomedical implants using these alloys. However, this alloy's complex thermo‐mechanical reaction makes the standard machining process more challenging. To overcome this problem, we propose an enhanced Wire Electrical Discharge Machining (WEDM) process specifically designed to produce Ti49.3Ni50.7 orthopedic components. The effects of five important machining elements were investigated using a systematic experimental framework based on a Taguchi L18 orthogonal design. Gray relational analysis (GRA) was used to optimize both surface roughness and material removal rate, while Random Forest Regression combined with Bayesian optimisation was used to improve to optimal condition predictions. An experimental validation confirmed the surface roughness of 1.298 μm and a material removal rate of 2.537 mm 3 /min. To evaluate the post‐machining surface integrity, SEM, XRD, microhardness profiling, and residual stress analysis were used. The results revealed reduced tensile stress concentrations, enhanced hardness gradients, and minimal recast layer formation. Bending recovery tests confirmed that the alloy's shape memory behavior was restored by post‐machining annealing. This comprehensive strategy creates a reliable and scalable framework for the high‐precision TiNi‐based orthopedic implant production.

  • Open Access

    Experimental, Statistical, and ANN Analysis of Solid and Circular Perforated Fins Array Under Forced Convection

    by B. B. Ganesha, G. V. Naveen Prakash, Manjunath G. Avalappa, Mukesh Kumar, B. Vinod

    The presented work illustrates the comparative analysis of forced convection heat transfer of rectangular solid and circular perforated fin arrays. This study considers fin spacing, perforation diameter, number of perforations, air velocity, and voltage as the varying parameters. The experiments were conducted using aluminum fins. After experimentation, the Nusselt number is calculated for all fin arrays. A statistical analysis is conducted to contrast the solid and fins with circular perforated fin array combinations. The orthogonal array test design method is applied to explore the parameters that affect system performance. In the case of rectangular solid fins, L9 OA was chosen. In the case of circular perforated fins, L27 OA was selected. For comparison, the larger‐is‐better (ZL) is utilized since an increase in Nusselt number means an increase in the heat transfer rate. The statistical and experimental analysis arrives at the finding that the Nusselt number rises with the velocity. A fin spacing of 10 mm provides a larger heat transmission rate. The diameter of the fin plays an effective role in determining the heat rate. In general conditions, circular perforated fins possess a greater heat transfer rate as compared to solid fins. This is because turbulence or disturbance is created between the fins. Additionally, the temperature in the entering zone is less than in the departure area. Perforated fins also assist in reducing the overall weight of the system. At last, nine models of ANN and two ANFIS are applied for predicting the Nusselt number. The accurate models are found from error measurement based on mean absolute deviation and mean absolute percent error.

  • Open Access

    Improving Abrasion Resistance of Carbon‐Epoxy Hybrid Composites With Silicon Nitride Fillers

    by Vinod B., Prem Chand R., Vasanth Kumar H. S., Jagannatha Reddy H. N., Manjunath G. Avalappa, Somashekar H. M., Bharath Basavaraj Pattanashetty, Mukesh Kumar

    The impact of micron level silicon nitride (Si3N4) filler on the multipass condition two‐body abrasive wear behavior of carbon fabric‐reinforced epoxy (C‐E) composites was examined in this study. Using a Pin‐on‐Disc tribometer, the tribological behavior of the produced composites was evaluated at 5 N and 10 N as well as at different abrasive distances of 25, 50, 75, and 100 m. Silicon carbide abrasive papers were used for the experiments. It was found that when the abrading distance and load were increased, the wear volume loss of the composite samples also increased. Notably, the hybrid composite H3 (containing 6 wt% Si3N4) exhibited the lowest specific wear rate (SWR), ranging from 0.2064 × 10−10 to 0.0074 × 10−10 m3/N m. The addition of Si3N4 improved the composite abrasion resistance considerably; when the content was increased from 2 to 4 wt%, the SWR decreased by 67.3%. A more significant decrease of 96.4% in SWR was attained by increasing to 6 wt% Si3N4 loading, indicating superior wear resistance. In comparison to the unfilled C‐E composite, the C‐E with 6 wt% Si3N4 filled composite demonstrated a 33.1% reduction in wear volume loss at 5 N. The results demonstrate that Si3N4 incorporation significantly enhances the abrasion resistance of C‐E composites by reducing both fiber and matrix wear through the formation of a protective transfer film that prevents large‐scale fragmentation. Scanning electron microscopy analysis revealed the underlying wear mechanisms, while the hybrid composites exhibited a strong correlation between wear volume loss and material hardness. These findings indicate promising applications in automotive brake systems, power plant components, and industrial bearings where superior wear resistance is critical.


  • Synthesis and Characterization of Nano-CuO Complexed HPMC:PVA Polymer Blend Electrolytes

    by N. Sandhya Rani, Sunil Kumar, B. Vinod, C. S. Dileep, C. Manasa, N. Srikantamurthy

  • Swelling behaviour of pine apple leaf fiber reinforced polymer composites in different working fluids

    by B. Vinod, L. J. Sudev, S. Rakshith, B. S. Suhash, Pradyuthrao

    However, the natural fibre reinforced polymer composites are prone to absorb fluids and swell when they are in contact with working fluids such as water, sea water, alcohol, acids etc. Absorption of such working fluids leads to change in characteristics of composite materials. Hence, the present work aims to analyse the swelling and weight gain behaviour of pine apple leaf fiber (PALF) reinforced composite material in different working fluids. The specimen are prepared and tested according to ASTM standard D5229 under different fluids like normal water, sea water, dilute HCl acidic solution, bases, hydrocarbons, petrol and diesel. The minimum change in relative weight and thickness of 2.3% and 1.8% respectively is obtained for sea water when compared to other fluids. The maximum adsorption of moisture takes place for NH4OH of relative weight fraction of 29.5% and relative thickness of 14.95%.


  • A comparative study of different natural fiber reinforced hybrid polymer composites

    by B. Vinod, L. J. Sudev, K. Shamanth, V. Vaishnavi Srivatsa

    The role of natural fibers as reinforcing material in polymer matrix composites have widely increased due to their specific properties like light weight, high specific strength, environmental friendly, high specific modulus and also have a good economic value. In this study, the tensile behaviour of jute-hemp fiber reinforced composites has been analysed and compared with other various hybrid polymer composites. The composite was manufactured using traditional hand layup method. Weight fraction of fiber and matrix was kept at 40%-60%. The test specimen was prepared according to the ASTM standards D 638. Testing was carried out using computerised universal testing machine for a load of 1kN at a rate of 3mm per min. The maximum tensile strength of 71MPa is obtained for composites reinforced with jute and hemp fibers compared to coir-wild date palm, PALF-metal powder, ragi flour –sugar cane fibers and jute - empty fruit bunch fibers.


  • Recent Material Advancement for Marine Application

    by K. Rohith, S. Shreyas, K.B. Vishnu Appaiah, R.V. Sheshank, B.B. Ganesha, B. Vinod


  • Open Access

    Study on Electrical Properties of PALF Reinforced Bisphenol-A Composite

    by B. Vinod, L. J. Sudev

    These days, composite materials successfully substitute the traditional materials due to its various significant applications. This paper examines the influence of fiber orientation and fiber length on electrical properties of PALF reinforced Bisphenol-A composite and explores the potential of using PALF as reinforcing material for electrical applications such as terminals, connectors, motor body cover, industrial and household plugs and circuit boards. The resistance and inductance of resin material is increased by 24.19% and 24.13% respectively after reinforcement of PALF in different orientations and its value increased by 37.93% and 37.81% respectively after reinforcement of PALF in different lengths. Similarly, Capacitance and Dielectric constant of resin material decreased by 19.44% and 19.39% respectively after reinforcement of PALF in different orientations and its value decreased by 27.67% and 27.50% respectively after reinforcement of PALF in different lengths. It can be inferred from this study that the fiber orientations and fiber lengths greatly effects the electrical properties of PALF composite.