Ken Morito
Ken Morito has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Shigeaki Sekiguchi
Nanotechnology Research Center, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
4 shared publications - Takasi Simoyama
Network Component PJ, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
4 shared publications - Yu Tanaka
Future Network Division, Fujitsu Ltd, 13332 Kawasaki, Kanagawa, Japan
4 shared publications Shinsuke Tanaka
Photonics Electronics Technology Research Association, Japan
3 shared publications- Toshihiko Mori
Kawasaki, PETRA, Kawasaki, Kanagawa Japan
3 shared publications - Akinori Hayakawa
Network Component PJ, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
2 shared publications
Latest Publications
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1262-1267
Low-Crosstalk Simultaneous 16-Channel × 25 Gb/s Operation of High-Density Silicon Photonics Optical Transceiver
We successfully developed a high density broadband 16-channel x 25 Gb/s on-package silicon photonics optical transceiver. The flip chip bonded bridge structure realized the high density of about 363 Gb/s/cm$^{2}$. We demonstrated the simultaneous all 16-channel error free operations with low crosstalk penalties of Tx-to-Tx 1.4 dB, Rx-to-Rx 1.4 dB, and Tx-to-Rx <0.1 dB.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1262-1267
Low-Crosstalk Simultaneous 16-Channel × 25 Gb/s Operation of High-Density Silicon Photonics Optical Transceiver
We successfully developed a high density broadband 16-channel x 25 Gb/s on-package silicon photonics optical transceiver. The flip chip bonded bridge structure realized the high density of about 363 Gb/s/cm$^{2}$. We demonstrated the simultaneous all 16-channel error free operations with low crosstalk penalties of Tx-to-Tx 1.4 dB, Rx-to-Rx 1.4 dB, and Tx-to-Rx <0.1 dB.
- Open Access
- 31 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1275-1280
Ultralow-Power (1.59 mW/Gbps), 56-Gbps PAM4 Operation of Si Photonic Transmitter Integrating Segmented PIN Mach–Zehnder Modulator and 28-nm CMOS Driver
A highly-power-efficient silicon (Si) photonic PAM4 transmitter was developed by integrating a Si segmented Mach-Zehnder modulator and a CMOS driver chip. Si PIN-type phase shifters are directly driven with a CMOS inverter driver array to realize a low power operation. A passive RC equalizing technique was adopted to extend the modulation bandwidth up to 20GHz while maintaining a low power consumption. By integrating a passive RC filter within the photonics chip, we achieved a very compact foot print for the transmitter (450 $\times$ 950 mu;m). The fabricated modulator exhibited a low V $\pi$ L of 0.19 Vcm and a moderate insertion loss of 23.7 dB/cm. The transmitter successfully demonstrated clear eye-openings of PAM4 signal up to 56 Gbps together with a record-high-efficiency of 1.59 mW/Gbps. A low bit-error-rate below KP4 FEC limit (<2.0 $\times$ 10 $^{-4}$ ) was also confirmed at 50-Gbps PAM4 operation even with an un-equalized receiver.- 31 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1275-1280
Open AccessUltralow-Power (1.59 mW/Gbps), 56-Gbps PAM4 Operation of Si Photonic Transmitter Integrating Segmented PIN Mach–Zehnder Modulator and 28-nm CMOS Driver
A highly-power-efficient silicon (Si) photonic PAM4 transmitter was developed by integrating a Si segmented Mach-Zehnder modulator and a CMOS driver chip. Si PIN-type phase shifters are directly driven with a CMOS inverter driver array to realize a low power operation. A passive RC equalizing technique was adopted to extend the modulation bandwidth up to 20GHz while maintaining a low power consumption. By integrating a passive RC filter within the photonics chip, we achieved a very compact foot print for the transmitter (450 $\times$ 950 mu;m). The fabricated modulator exhibited a low V $\pi$ L of 0.19 Vcm and a moderate insertion loss of 23.7 dB/cm. The transmitter successfully demonstrated clear eye-openings of PAM4 signal up to 56 Gbps together with a record-high-efficiency of 1.59 mW/Gbps. A low bit-error-rate below KP4 FEC limit (<2.0 $\times$ 10 $^{-4}$ ) was also confirmed at 50-Gbps PAM4 operation even with an un-equalized receiver. - 1 January 2015
- Published by Optica Publishing Group
- p. Th1G.2
A 25 Gbps silicon photonic transmitter and receiver with a bridge structure for CPU interconnects
We present a novel configuration of hybrid-integrated silicon photonic interconnects employing a bridge structure, and demonstrate 25 Gbps error-free operation between transmitter and receiver with power efficiency of 9.6 mW/Gbps including a serializer chip.
- 1 January 2015
- Published by Optica Publishing Group
- p. Th1G.2
A 25 Gbps silicon photonic transmitter and receiver with a bridge structure for CPU interconnects
We present a novel configuration of hybrid-integrated silicon photonic interconnects employing a bridge structure, and demonstrate 25 Gbps error-free operation between transmitter and receiver with power efficiency of 9.6 mW/Gbps including a serializer chip.
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 89-90
Observation of suppressed dark current of Ge on Si (100) using ultrathin Ge seed layer
In this study, we investigated the effect of the Ge LT layer thickness in HT/LT 2-step Ge growth on the I-V characteristics. Even the ultrathin 5-nm-thick LT layer could lower the dark current caused by the defects due to the effective defect termination between Ge/Si interfaces.
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 89-90
Observation of suppressed dark current of Ge on Si (100) using ultrathin Ge seed layer
In this study, we investigated the effect of the Ge LT layer thickness in HT/LT 2-step Ge growth on the I-V characteristics. Even the ultrathin 5-nm-thick LT layer could lower the dark current caused by the defects due to the effective defect termination between Ge/Si interfaces.
- 1 August 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (8) , 82101
Silicon-Wire Waveguide Based External Cavity Laser for Milliwatt-Order Output Power and Temperature Control Free Operation with Silicon Ring Modulator
We report a novel hybrid laser based on a silicon-wire external cavity filter. We characterize the hybrid silicon laser from the viewpoint of high output extraction efficiency and temperature control free operation with a silicon microring resonator. First, it is experimentally verified that output extraction efficiency of the laser is significantly improved by locating an optical coupler within the laser cavity. As a result, we show mW-order output power and wall-plug efficiency of ∼0.9%. In addition, we demonstrate that the operating window of the silicon microring modulator is adaptable to the oscillation wavelength of the hybrid silicon laser in regard to temperature change of a silicon substrate from 25 to 55 °C.
- 1 August 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (8) , 82101
Silicon-Wire Waveguide Based External Cavity Laser for Milliwatt-Order Output Power and Temperature Control Free Operation with Silicon Ring Modulator
We report a novel hybrid laser based on a silicon-wire external cavity filter. We characterize the hybrid silicon laser from the viewpoint of high output extraction efficiency and temperature control free operation with a silicon microring resonator. First, it is experimentally verified that output extraction efficiency of the laser is significantly improved by locating an optical coupler within the laser cavity. As a result, we show mW-order output power and wall-plug efficiency of ∼0.9%. In addition, we demonstrate that the operating window of the silicon microring modulator is adaptable to the oscillation wavelength of the hybrid silicon laser in regard to temperature change of a silicon substrate from 25 to 55 °C.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
GainNAs / InP Tensile-Strained Bulk Polarization-Insensitive SOA
A GaInNAs / InP tensile-strained bulk polarization-insensitive SOA was developed for the first time. It exhibited a red shift of gain peak, 50 nm, resulting in a low gain tilt of 1.5 dB in the wavelength of 1530-1570 nm.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
GainNAs / InP Tensile-Strained Bulk Polarization-Insensitive SOA
A GaInNAs / InP tensile-strained bulk polarization-insensitive SOA was developed for the first time. It exhibited a red shift of gain peak, 50 nm, resulting in a low gain tilt of 1.5 dB in the wavelength of 1530-1570 nm.