Shigeaki Sekiguchi
Research Subjects
Shigeaki Sekiguchi has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Suguru Akiyama
Devices & Materials Laboratory, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
5 shared publications - Ken Morito
Network Component PJ, Fujitsu Laboratories Ltd., Atsugi, Kanagawa Japan
4 shared publications - Hitoshi Kawashima
Ultrafast Photonic Devices Lab., AIST, Tsukuba, Ibaraki Japan 305-8568
3 shared publications - Kazuhiro Ikeda
National Institute of Advanced Industrial Science and Technology (AIST)
3 shared publications - Kazumasa Takabayashi
Nanotechnology Research Center, Fujitsu Laboratories, Atsugi, Kanagawa Japan
3 shared publications - Keijiro Suzuki
National Institute of Advanced Industrial Science and Technology (AIST)
3 shared publications
Latest Publications
- Open Access
- 20 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 2930-2937
Gain-Integrated 8 × 8 Silicon Photonics Multicast Switch With On-Chip 2 × 4-ch. SOAs
In order to support continuous growth of global IP traffic, highly energy-efficient networks are demanded. One of the key components is an optical multicast switch which has large bandwidth with small power consumption. When using multicast switches, however, intrinsic losses will be an issue especially for large port count switches. Erbium doped fiber amplifiers (EDFAs) are typically used for the loss compensation, although it would much increase the number of components and footprint of the system. One of the options to solve this problem would be an integration technology of semiconductor optical amplifiers (SOAs) on the silicon photonics switches which we have recently developed. In previous work, we have demonstrated a gain-integrated 4 × 4 silicon matrix switch. For the practical use of our technology, it is very important to show further scalability of the platform. Moreover, it is also important to show applicability to other switch topologies, such as multicast switches. In this paper, we demonstrate an 8 × 8 silicon photonics MCS with on-chip integrated 2 × 4-ch. SOAs. The on-chip SOAs exhibit a net gain of ~9 dB, which almost compensates for the intrinsic loss. We observe the crosstalk of less than —35 dB. Loss/crosstalk reduction and chip power consumption are also discussed.
- 20 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 2930-2937
Open AccessGain-Integrated 8 × 8 Silicon Photonics Multicast Switch With On-Chip 2 × 4-ch. SOAs
In order to support continuous growth of global IP traffic, highly energy-efficient networks are demanded. One of the key components is an optical multicast switch which has large bandwidth with small power consumption. When using multicast switches, however, intrinsic losses will be an issue especially for large port count switches. Erbium doped fiber amplifiers (EDFAs) are typically used for the loss compensation, although it would much increase the number of components and footprint of the system. One of the options to solve this problem would be an integration technology of semiconductor optical amplifiers (SOAs) on the silicon photonics switches which we have recently developed. In previous work, we have demonstrated a gain-integrated 4 × 4 silicon matrix switch. For the practical use of our technology, it is very important to show further scalability of the platform. Moreover, it is also important to show applicability to other switch topologies, such as multicast switches. In this paper, we demonstrate an 8 × 8 silicon photonics MCS with on-chip integrated 2 × 4-ch. SOAs. The on-chip SOAs exhibit a net gain of ~9 dB, which almost compensates for the intrinsic loss. We observe the crosstalk of less than —35 dB. Loss/crosstalk reduction and chip power consumption are also discussed.
- Open Access
- 13 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (2) , 307-313
Hybrid-Integration of SOA on Silicon Photonics Platform Based on Flip-Chip Bonding
A precise flip-chip bonding (FCB) technology for indium phosphide semiconductor optical amplifiers (InP-SOAs) on a silicon photonics platform within less than ±1 μm alignment accuracy was developed. For efficient optical coupling and a relaxed alignment tolerance, the mode field on both the InP-SOAs and the Si waveguides was expanded by spot-size converters (SSCs). On the InP-SOAs, width-tapered SSCs were used to obtain an isotropic mode-field having an approximately 3-μm diameter. On the silicon photonics platform, dual-core SSCs were used to expand the same mode field size of 3 μm as for the SSCs on SOAs. Using our FCB technology and SSCs, an in-line optical amplification of 15 dB was achieved by in-line integrated SOAs with angled waveguides. The optical coupling losses were 7.7 dB, which included 5.1-dB excess losses by misalignment and a gap between InP-SOA and Si waveguides. A 4 × 4 Si switch with hybrid-integrated 4-ch SOA array was fabricated, and achieved the first demonstration of a lossless Si switch.
- 13 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (2) , 307-313
Open AccessHybrid-Integration of SOA on Silicon Photonics Platform Based on Flip-Chip Bonding
A precise flip-chip bonding (FCB) technology for indium phosphide semiconductor optical amplifiers (InP-SOAs) on a silicon photonics platform within less than ±1 μm alignment accuracy was developed. For efficient optical coupling and a relaxed alignment tolerance, the mode field on both the InP-SOAs and the Si waveguides was expanded by spot-size converters (SSCs). On the InP-SOAs, width-tapered SSCs were used to obtain an isotropic mode-field having an approximately 3-μm diameter. On the silicon photonics platform, dual-core SSCs were used to expand the same mode field size of 3 μm as for the SSCs on SOAs. Using our FCB technology and SSCs, an in-line optical amplification of 15 dB was achieved by in-line integrated SOAs with angled waveguides. The optical coupling losses were 7.7 dB, which included 5.1-dB excess losses by misalignment and a gap between InP-SOA and Si waveguides. A 4 × 4 Si switch with hybrid-integrated 4-ch SOA array was fabricated, and achieved the first demonstration of a lossless Si switch.
- 31 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (1) , 123-130
SOA-Integrated Silicon Photonics Switch and Its Lossless Multistage Transmission of High-Capacity WDM Signals
We experimentally demonstrate the lossless transmission of wavelength division multiplexing (WDM) signals through a silicon-photonics 4 × 4 switch with a flip-chip bonded 4-channel semiconductor optical amplifier (SOA). We first optimized the input power and gain of the SOA-integrated switch to obtain the optimum operation point in terms of the transmitted signal quality. We then performed simultaneous transmission of 8-ch, 32-Gbaud, SP 16-QAM WDM (800 Gbps) signals through all the four paths of the switch. The effect of crosstalk on the switch was very small, and thus could not be observed. We also examined multistage (up to four stages) transmission of the signals with circulating configurations. We show that even for a 4-stage transmission, the bit error rate of the transmitted signal is below the 20% forward-error-correction limit. Finally, we discuss approaches to improve the optical signal-to-noise ratio (OSNR) of the transmitted signals to enlarge the signal quality margin and increase the possible number of the cascading stages and/or WDM channels for wide applications.
- 31 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (1) , 123-130
SOA-Integrated Silicon Photonics Switch and Its Lossless Multistage Transmission of High-Capacity WDM Signals
We experimentally demonstrate the lossless transmission of wavelength division multiplexing (WDM) signals through a silicon-photonics 4 × 4 switch with a flip-chip bonded 4-channel semiconductor optical amplifier (SOA). We first optimized the input power and gain of the SOA-integrated switch to obtain the optimum operation point in terms of the transmitted signal quality. We then performed simultaneous transmission of 8-ch, 32-Gbaud, SP 16-QAM WDM (800 Gbps) signals through all the four paths of the switch. The effect of crosstalk on the switch was very small, and thus could not be observed. We also examined multistage (up to four stages) transmission of the signals with circulating configurations. We show that even for a 4-stage transmission, the bit error rate of the transmitted signal is below the 20% forward-error-correction limit. Finally, we discuss approaches to improve the optical signal-to-noise ratio (OSNR) of the transmitted signals to enlarge the signal quality margin and increase the possible number of the cascading stages and/or WDM channels for wide applications.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1262-1267
Low-Crosstalk Simultaneous 16-Channel × 25 Gb/s Operation of High-Density Silicon Photonics Optical Transceiver
We successfully developed a high density broadband 16-channel x 25 Gb/s on-package silicon photonics optical transceiver. The flip chip bonded bridge structure realized the high density of about 363 Gb/s/cm$^{2}$. We demonstrated the simultaneous all 16-channel error free operations with low crosstalk penalties of Tx-to-Tx 1.4 dB, Rx-to-Rx 1.4 dB, and Tx-to-Rx <0.1 dB.
- 1 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1262-1267
Low-Crosstalk Simultaneous 16-Channel × 25 Gb/s Operation of High-Density Silicon Photonics Optical Transceiver
We successfully developed a high density broadband 16-channel x 25 Gb/s on-package silicon photonics optical transceiver. The flip chip bonded bridge structure realized the high density of about 363 Gb/s/cm$^{2}$. We demonstrated the simultaneous all 16-channel error free operations with low crosstalk penalties of Tx-to-Tx 1.4 dB, Rx-to-Rx 1.4 dB, and Tx-to-Rx <0.1 dB.
- Open Access
- 31 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1275-1280
Ultralow-Power (1.59 mW/Gbps), 56-Gbps PAM4 Operation of Si Photonic Transmitter Integrating Segmented PIN Mach–Zehnder Modulator and 28-nm CMOS Driver
A highly-power-efficient silicon (Si) photonic PAM4 transmitter was developed by integrating a Si segmented Mach-Zehnder modulator and a CMOS driver chip. Si PIN-type phase shifters are directly driven with a CMOS inverter driver array to realize a low power operation. A passive RC equalizing technique was adopted to extend the modulation bandwidth up to 20GHz while maintaining a low power consumption. By integrating a passive RC filter within the photonics chip, we achieved a very compact foot print for the transmitter (450 $\times$ 950 mu;m). The fabricated modulator exhibited a low V $\pi$ L of 0.19 Vcm and a moderate insertion loss of 23.7 dB/cm. The transmitter successfully demonstrated clear eye-openings of PAM4 signal up to 56 Gbps together with a record-high-efficiency of 1.59 mW/Gbps. A low bit-error-rate below KP4 FEC limit (<2.0 $\times$ 10 $^{-4}$ ) was also confirmed at 50-Gbps PAM4 operation even with an un-equalized receiver.- 31 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1275-1280
Open AccessUltralow-Power (1.59 mW/Gbps), 56-Gbps PAM4 Operation of Si Photonic Transmitter Integrating Segmented PIN Mach–Zehnder Modulator and 28-nm CMOS Driver
A highly-power-efficient silicon (Si) photonic PAM4 transmitter was developed by integrating a Si segmented Mach-Zehnder modulator and a CMOS driver chip. Si PIN-type phase shifters are directly driven with a CMOS inverter driver array to realize a low power operation. A passive RC equalizing technique was adopted to extend the modulation bandwidth up to 20GHz while maintaining a low power consumption. By integrating a passive RC filter within the photonics chip, we achieved a very compact foot print for the transmitter (450 $\times$ 950 mu;m). The fabricated modulator exhibited a low V $\pi$ L of 0.19 Vcm and a moderate insertion loss of 23.7 dB/cm. The transmitter successfully demonstrated clear eye-openings of PAM4 signal up to 56 Gbps together with a record-high-efficiency of 1.59 mW/Gbps. A low bit-error-rate below KP4 FEC limit (<2.0 $\times$ 10 $^{-4}$ ) was also confirmed at 50-Gbps PAM4 operation even with an un-equalized receiver. - 1 January 2015
- Published by Optica Publishing Group
- p. Th1G.2
A 25 Gbps silicon photonic transmitter and receiver with a bridge structure for CPU interconnects
We present a novel configuration of hybrid-integrated silicon photonic interconnects employing a bridge structure, and demonstrate 25 Gbps error-free operation between transmitter and receiver with power efficiency of 9.6 mW/Gbps including a serializer chip.
- 1 January 2015
- Published by Optica Publishing Group
- p. Th1G.2
A 25 Gbps silicon photonic transmitter and receiver with a bridge structure for CPU interconnects
We present a novel configuration of hybrid-integrated silicon photonic interconnects employing a bridge structure, and demonstrate 25 Gbps error-free operation between transmitter and receiver with power efficiency of 9.6 mW/Gbps including a serializer chip.
- 1 August 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (8) , 82101
Silicon-Wire Waveguide Based External Cavity Laser for Milliwatt-Order Output Power and Temperature Control Free Operation with Silicon Ring Modulator
We report a novel hybrid laser based on a silicon-wire external cavity filter. We characterize the hybrid silicon laser from the viewpoint of high output extraction efficiency and temperature control free operation with a silicon microring resonator. First, it is experimentally verified that output extraction efficiency of the laser is significantly improved by locating an optical coupler within the laser cavity. As a result, we show mW-order output power and wall-plug efficiency of ∼0.9%. In addition, we demonstrate that the operating window of the silicon microring modulator is adaptable to the oscillation wavelength of the hybrid silicon laser in regard to temperature change of a silicon substrate from 25 to 55 °C.
- 1 August 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (8) , 82101
Silicon-Wire Waveguide Based External Cavity Laser for Milliwatt-Order Output Power and Temperature Control Free Operation with Silicon Ring Modulator
We report a novel hybrid laser based on a silicon-wire external cavity filter. We characterize the hybrid silicon laser from the viewpoint of high output extraction efficiency and temperature control free operation with a silicon microring resonator. First, it is experimentally verified that output extraction efficiency of the laser is significantly improved by locating an optical coupler within the laser cavity. As a result, we show mW-order output power and wall-plug efficiency of ∼0.9%. In addition, we demonstrate that the operating window of the silicon microring modulator is adaptable to the oscillation wavelength of the hybrid silicon laser in regard to temperature change of a silicon substrate from 25 to 55 °C.
- 3 April 2012
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (8) , 8949-8958
Compact and low power operation optical switch using silicon-germanium/silicon hetero-structure waveguide
We proposed a silicon-based optical switch with a carrier-plasma-induced phase shifter which employs a silicon-germanium (SiGe) / silicon (Si) hetero-structure in the waveguide core. A type-I hetero-interface formed by SiGe and Si is expected to confine carriers effectively in the SiGe waveguide core. The fabricated Mach-Zehnder optical switch shows a low switching power of only 1.53 mW with a compact phase shifter length of 250 μm. The switching time of the optical switch is less than 4.6 ns for the case of a square waveform driving condition, and 1 ns for the case of a pre-emphasis electric driving condition. These results show that our proposed SiGe/Si waveguide structure holds promise for active devices with compact size and low operation power.
- 3 April 2012
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (8) , 8949-8958
Compact and low power operation optical switch using silicon-germanium/silicon hetero-structure waveguide
We proposed a silicon-based optical switch with a carrier-plasma-induced phase shifter which employs a silicon-germanium (SiGe) / silicon (Si) hetero-structure in the waveguide core. A type-I hetero-interface formed by SiGe and Si is expected to confine carriers effectively in the SiGe waveguide core. The fabricated Mach-Zehnder optical switch shows a low switching power of only 1.53 mW with a compact phase shifter length of 250 μm. The switching time of the optical switch is less than 4.6 ns for the case of a square waveform driving condition, and 1 ns for the case of a pre-emphasis electric driving condition. These results show that our proposed SiGe/Si waveguide structure holds promise for active devices with compact size and low operation power.
- 1 March 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
10 Gb/s Wavelength-Tunable EML with Continuous Wavelength Tuning Covering 50 GHz × 8 Channels on ITU Grid
A wavelength-tunable EA-modulated laser (wavelength-tunable EML) using tunable distributed amplification (TDA) structure was demonstrated. An 80 km transmission of 10 Gb/s signals was confirmed on 8 channels on ITU grid using the device's simple, continuous tuning mechanism.
- 1 March 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
10 Gb/s Wavelength-Tunable EML with Continuous Wavelength Tuning Covering 50 GHz × 8 Channels on ITU Grid
A wavelength-tunable EA-modulated laser (wavelength-tunable EML) using tunable distributed amplification (TDA) structure was demonstrated. An 80 km transmission of 10 Gb/s signals was confirmed on 8 channels on ITU grid using the device's simple, continuous tuning mechanism.