J C C Aya
J C C Aya has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Oscar Elisio Mattia
Department of Electrical Engineering, Stanford University, Stanford, CA, USA
1 shared publication - Rodrigo Wolff Porto
Electrical Engineering Department, Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil
1 shared publication
Latest Publications
- 20 December 2012
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 407 (1) , 012011
Design and characterization of a multi-frequency bioimpedance measurement prototype
A multi-frequency bioimpedance measurement prototype is proposed, validated and characterized. It consists of an Improved Howland Current Source controlled by voltage, a load voltage sensing scheme through a discrete 3-opamp instrumentation amplifier, a phase and quadrature demodulation setup through analog multipliers, and digitization and processing of the signals using a digital benchtop multimeter. The electrical characterization of the measurement channel was done for resistive loads only, on four different circuits. Measurements were made on 10 frequencies, from 100 kHz to 1 MHz, with 10 load resistances, from 100 Ω to 1 kΩ, to obtain linearity, absolute error and frequency response. The best performance among the four circuits was a maximum absolute error of 5.55 %, and −1.93 % of load current variation at the worst case scenario.
- 20 December 2012
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 407 (1) , 012011
Design and characterization of a multi-frequency bioimpedance measurement prototype
A multi-frequency bioimpedance measurement prototype is proposed, validated and characterized. It consists of an Improved Howland Current Source controlled by voltage, a load voltage sensing scheme through a discrete 3-opamp instrumentation amplifier, a phase and quadrature demodulation setup through analog multipliers, and digitization and processing of the signals using a digital benchtop multimeter. The electrical characterization of the measurement channel was done for resistive loads only, on four different circuits. Measurements were made on 10 frequencies, from 100 kHz to 1 MHz, with 10 load resistances, from 100 Ω to 1 kΩ, to obtain linearity, absolute error and frequency response. The best performance among the four circuits was a maximum absolute error of 5.55 %, and −1.93 % of load current variation at the worst case scenario.