MZMinghui Zhang

Minghui Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Minghui Zhang has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of sputtering pressure and annealing temperature on the characteristics of indium selenide thin films

    by Xinfeng Zhu, Xuechao Liu, Quan Zheng, Hao Wang, Minghui Zhang, Xiuhong Pan, Meibo Tang, Min Jin

    Indium selenide is a significant two-dimensional lamellar semiconductor with excellent physical properties whose enormous potential utilization in optoelectronic devices has been practically hindered by the lack of suitable thin film deposition techniques. Herein, γ-In2Se3 thin films were successfully fabricated from an InSe-target via magnetron sputtering combined with subsequent annealing process. The effects of sputtering pressure and annealing temperature on the characteristics of as-deposited thin films were investigated. The x-ray diffraction (XRD) patterns reveal that the pristine thin films are amorphous in nature, whereas transform into polycrystalline and are identified as γ-In2Se3 phase after annealing treatment. The growth mechanism of as-deposited layers combines a two-dimensional lateral growth and a three-dimensional island growth. The scanning electron microscopy (SEM) and atomic force microscopy (AFM) images indicate that all the samples show uniform and compact structures with no evident holes and crevices. The UV–vis-NIR spectrophotometer was employed to measure the optical transmittance and band gap of the synthesized thin films. The results show an obvious decrease in the band gap from 2.56 eV to 1.88 eV with annealing temperature increased from 400 °C to 600 °C, respectively. In addition, the difficult reasons for preparing monophase InSe thin films by magnetron sputtering method were discussed. These intriguing findings in this study may shed light on the growth of indium selenide thin films with well-crystallized and high quality.


  • Preparation of new multi-composition oxide glasses with high refractive index by containerless solidification

    by Weiliang Shi, Jiqi Lu, Meixi Chen, Fuyun Wen, Zijian Li, Hongyang Zhao, Minhui Zhang, Zhaozhao Mao


  • Structural, Thermal, and Optical Property of GeO2-La2O3-TiO2 Glasses

    by Wan Jiabao, Zhang Minghui, Su Huaiyu, Cao Zhijun, Liu Xuechao, Xie Jiansheng, Wang Xiangyuan, Shi Yinghui, Wang Liang, Lei Shuijin

  • Open Access

    Growth and characterization of uniformly distributed triangular single-crystalline hexagonal boron nitride grains on liquid copper surface

    by Ziqiang Hao, Xuechao Liu, Xinfeng Zhu, Minghui Zhang, Meibo Tang, Xiuhong Pan

    Single-layer hexagonal boron nitride (h-BN) is a two-dimensional (2D) material with a wide band gap and extraordinary mechanical, thermal and optical properties. It has promising applications in optoelectronics, electronics and photovoltaics. Low-pressure (150 Pa) chemical vapor deposition (LPCVD) was used to prepare uniformly distributed single-crystalline triangular h-BN grains and continuous film on liquid copper surface. A series of microscopic and spectroscopic methods were performed to characterize the morphology, crystalline structure and quality, component and thickness. It was found that h-BN grains turned into circles at higher background pressure (1000 Pa), which was due to the change in the growth mechanism from equilibrium controlled to deposition controlled. Small islands formed on primary h-BN grains because of higher concentration of precursor product. Compared to the higher background pressure, the synthetic h-BN films at low background pressure exhibited larger domain size, lower nucleation density, and no adlayer growth. Due to randomly distributed polar h-BN grains, the grain boundaries formed along the h-BN domains after merging. Typical patterns formed via the coalescence of triangular h-BN grains indicating the merging mode of growth, including edge-to-edge and edge-to-point modes. This work provides a pathway for the preparation of uniformly distributed single-crystalline h-BN grains and an in-depth understanding of the growth and merging process on liquid Cu surface.


  • Open Access

    Optical temperature sensing performance of Er3+/Yb3+ co-doped TiO2–ZrO2–La2O3 glasses

    by Yanzhuo Wang, Minghui Zhang, Jiansheng Xie, Feng Wu, Xuechao Liu, Kun Chen, Yan Zhang, Xiuhong Pan, Weijie Deng, Meibo Tang, et al.

    Er3+/Yb3+ co-doped TiO2-ZrO2-La2O3 glasses were prepared by aerodynamic levitation method. The transmittance spectrum shows that the transmittance of the glass before and after irradiation decreases from 75.46% to 71.13% in visible and near-infrared bands. The absorption and emission cross sections of the glasses at 525 nm were studied. The glasses are thermally treated at various temperatures and then investigated by X-ray diffraction, Scanning Electron Microscope and Transmission Electron Microscopy. Optical spectra were measured as a function of temperature in the range of 298-498 K. The maximum relative sensitivity was determined to be 1.47% K-1 at 298 K. These results imply that the obtained glass may have the potential to be the matrix material for temperature sensing that requires to employed in a complex environment.


  • Open Access

    Study on optical properties and luminescence of Er3+/Yb3+ co-doped La2O3-Nb2O5-Ta2O5 glasses prepared by aerodynamic levitation

    by Minghui Zhang, Haiqin Wen, Xiuhong Pan, Meibo Tang, Wei Zheng

    Aerodynamic levitation method has been successfully used to prepare new Er3+/Yb3+ co-doped La2O3-Nb2O5-Ta2O5 glasses. 980 nm laser can be used to excite the glass for strong absorption of Yb3+ ions. The glass show high infrared transmittance of ∼80%. Moreover, the OH− concentration is very low with the value of ∼7 ppm, indicating excellent infrared transmission. The glass performs good optical properties with refractive index of near 2.3. The plane sweeping of EDS reveals that Er3+ and Yb3+ are distributed homogeneously in the glass. Strong down-conversion luminescence centered at 1530 nm has been achieved from the glass excited at 980 nm. The near-infrared emission is due to the transition of 4I13/2 → 4I15/2 in Er3+ ions. After fitting the decay curve, the lifetime of the near-infrared emission can be decided to be ∼5.517 ms. Such long lifetime is very helpful for rare earth ions to achieve strong emission.


  • Thermal properties and upconversion luminescence of Er3+/Yb3+ co-doped La2O3–TiO2–WO3 glasses prepared by containerless processing

    by Haiqin Wen, Fei Ai, Xiuhong Pan, Meibo Tang, Minghui Zhang

    Er3+/Yb3+ co-doped La2O3-TiO2-WO3 (LTW) glass spheres with different WO3 concentrations were prepared by aerodynamic levitation method. The effects of WO3 concentration on thermal properties, Raman spectra, upconversion luminescence spectra and fluorescence lifetime were studied. Er3+/Yb3+ co-doped LTW glasses have high thermal stability. With WO3 concentration increasing, the thermal stability decreases, and the glass forming ability increases and then decreases. The glasses perform low phonon energy with the maximum phonon energy of 737 cm-1. WO3 show little effect on the phonon energy of the glasses. Green and red upconversion luminescence centered at 554 nm and 673 nm were obtained under 980 nm excitation. As WO3 concentration increases, the intensity of upconversion luminescence first increases and then decreases. The introduction of WO3 can reduce the red/green ratio sharply. Compared to green upconversion luminescence, WO3 plays a role in constraining the red emission. The measurements of fluorescence lifetime confirm the intensity change for green and red emissions. The fluorescence lifetimes at 673 nm are longer than those at 554 nm, leading to stronger red upconversion luminescence. Novel Er3+/Yb3+ co-doped LTW bulk glasses obtained by containerless processing exhibit promising application prospect in small optics devices.


  • Open Access

    Epitaxial Growth of Orthorhombic GaFeO3 Thin Films on SrTiO3 (111) Substrates by Simple Sol-Gel Method

    by Minghui Zhang, Shintaro Yasui, Tsukasa Katayama, Badari Narayana Rao, Haiqin Wen, Xiuhong Pan, Meibo Tang, Fei Ai, Mitsuru Itoh

    A Sol-gel method assisted with spin-coating has been successfully used to grow orthorhombic GaFeO3 epitaxial films on SrTiO3 (111) substrates for the first time. The film with Pna21 crystal structure has been grown along the c-axis. The rocking curve of (004) reflection shows that the Full-Width at Half-Maximum (FWHM) value could be determined to be 0.230°, indicating good single crystallinity and high quality. X-ray Φ scan reveals a three-fold symmetry of the substrate and a six-fold symmetry of the film, respectively. The in-plane domains rotate 60° from each other in the film. Uniform film with dense structure, columnar grains with similar grain size was obtained. The thickness of the film was evaluated to be ~170 nm. The roughness value (RMS) measured by AFM was 4.5 nm, revealing a flat film. The in-plane Magnetization versus Magnetic field (M-H) curve at 5 K performs a typical ferri- or ferromagnetic hysteresis loop with a saturated magnetization (Ms) value of 136 emu/cm3. The Curie temperature could be determined to be 174 K. Compared to Pulsed Laser Deposition (PLD), the sol-gel method can prepare large area films with low cost. These new films show promising applications in multiferroic devices.


  • Open Access

    Study on Upconversion and Thermal Properties of Tm3+/Yb3+ Co-Doped La2O3-Nb2O5-Ta2O5 Glasses

    by Minghui Zhang, Haiqin Wen, Xiuhong Pan, Jianding Yu, Hui Shao, Fei Ai, Huimei Yu, Meibo Tang, Lijun Gai

    The effect of Yb3+ ions on upconversion luminescence and thermal properties of Tm3+/Yb3+ co-doped La2O3-Nb2O5-Ta2O5 glasses has been studied. Glass transition temperature is around 740 °C, indicating high thermal stability. The effect of Yb3+ ions on the thermal stability is not obvious. Both the glass forming ability and the upconversion luminescence first increase and then decrease with the increase of Yb3+ ions. The glasses perform low glass forming ability with ΔT around 55 °C. Blue and red emissions centered around 477, 651, and 706 nm are obtained at the excitation of 976 nm laser. The upconversion luminescence mechanism is energy transfer from Yb3+ to Tm3+ mixed with two- and three- photon processes. The thermal kinetic Differential Thermal Analysis (DTA)-analysis indicates that the average activation energy first increases and then decreases with the increase of Yb3+ ions. This result can be introduced in order to improve upconversion luminescence of glasses by crystallization in the future. Tm3+/Yb3+ co-doped La2O3-Nb2O5-Ta2O5 glasses with good upconversion and thermal properties show promising applications in solid-state laser, optical temperature sensing.


  • The effect of micro-structure on upconversion luminescence of Nd3+/Yb3+ co-doped La2O3-TiO2-ZrO2 glass-ceramics

    by Minghui Zhang, Haiqin Wen, Xiuhong Pan, Jianding Yu, Meng Jiang, Huimei Yu, Meibo Tang, Lijun Gai, Fei Ai

    Nd3+/Yb3+ co-doped La2O3-TiO2-ZrO2 glasses have been prepared by aerodynamic levitation method. The glasses show high refractive index of 2.28 and Abbe number of 18.3. Glass-ceramics heated at 880 oC for 50 min perform the strongest upconversion luminescence. X-ray diffraction patterns of glass-ceramics with different depths indicate that rare earth ions restrain crystallization. Body crystallization mechanism mixed with surface crystallization is confirmed in the heat treatment. Surface crystals achieve priority to grow, resulting in important effects on upconversion luminescence. The results of atomic force microscope and scanning electron microscope indicate that crystal particles with uniform size distribute densely and homogenously on the surface and large amount of glass matrix exists in the glass ceramics heated at 880 oC for 50 min. Crystals in the glass-ceramics present dense structure and strong boundaries, which can reduce the mutual nonradiative relaxation rate among rare earth ions and then improve upconversion luminescence effectively. Based on micro-structural study, the mechanism that upconversion luminescence can be improved by heat treatment has been revealed. The results of micro-structural analysis agree well with the spectra.