Shota Ushiba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shota Ushiba has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Kazuhiko Matsumoto
The University of Osaka, Ibaraki, Osaka 567-0047, Japan
17 shared publicationsMasahiko Kimura
Murata Manufacturing Co., Ltd., 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
17 shared publicationsShinsuke Tani
Murata Manufacturing Co., Ltd., 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
16 shared publications- Takao Ono
Osaka Univ, SANKEN, Ibaraki, Osaka 5670047, Japan
15 shared publications Tomomi Nakano
Murata Manufacturing Co., Ltd. 1 , 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555
10 shared publications- Yasushi Kanai
International Center for Synchrotron Radiation Innovation Smart, Tohoku University, 468-1 Aramaki Aza-Aoba, Aoba-ku, Sendai 980-8572, Japan
9 shared publications
Latest Publications
- Open Access
- 2 April 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (8)
Extremely stable virus sensing using graphene FET with suppressed drift characteristics due to reduction of gate leakage current by passivation layer
We have improved the drift characteristics of the graphene FET biosensor that have been a great problem in the previous graphene FET biosensing, enabling stable virus detection. Among the various origins of the drift characteristics, we found out the gate leakage current through the ionic electrolyte solution between the reference gate electrode and the metal source/drain electrodes exposed to the solution attributes largely to the drift characteristics. Moreover, this gate leakage current decreases over time and shows the drift characteristics. The gate leakage current was dramatically suppressed by passivating the source /drain metal electrodes with the photoresist (SU-8) and/or SiO2. As a result, the drift slope of the substrate with the passivation layer is improved and becomes one-sixth of that without the passivation layer. Furthermore, the electrical charge of SARS-CoV-2 could be clearly detected by suppressing the drift characteristics using the antibody modified GFET with the passivation layer.
- 2 April 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (8)
Open AccessExtremely stable virus sensing using graphene FET with suppressed drift characteristics due to reduction of gate leakage current by passivation layer
We have improved the drift characteristics of the graphene FET biosensor that have been a great problem in the previous graphene FET biosensing, enabling stable virus detection. Among the various origins of the drift characteristics, we found out the gate leakage current through the ionic electrolyte solution between the reference gate electrode and the metal source/drain electrodes exposed to the solution attributes largely to the drift characteristics. Moreover, this gate leakage current decreases over time and shows the drift characteristics. The gate leakage current was dramatically suppressed by passivating the source /drain metal electrodes with the photoresist (SU-8) and/or SiO2. As a result, the drift slope of the substrate with the passivation layer is improved and becomes one-sixth of that without the passivation layer. Furthermore, the electrical charge of SARS-CoV-2 could be clearly detected by suppressing the drift characteristics using the antibody modified GFET with the passivation layer.
- Open Access
- 30 October 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Electrochemiluminescence Detection in Optically Dense Solutions Through Transparent Graphene Electrodes
Electrochemiluminescence (ECL) enables highly sensitive bioanalytical detection; however, its practical application is constrained by strong optical absorption in colored or optically dense samples, which significantly attenuates the emitted signal. In this study, we address this limitation by employing transparent graphene electrodes for enzyme-mediated ECL detection in optically dense liquids. Glutamate oxidase was immobilized in proximity to the electrode surface to catalyze the conversion of glutamate into hydrogen peroxide, which subsequently initiated luminol-based ECL. The integrated ECL intensity increased with glutamate concentration and followed a Michaelis–Menten–type relationship, confirming that the signal originated from the enzymatic reaction. When evaluated in soy sauce—a dark and strongly absorbing liquid—negligible ECL emission was detected in the conventional through-solution configuration, whereas clear ECL images were obtained when observed through the transparent graphene electrode. This strategy eliminates the need for extensive sample dilution to mitigate absorption-induced signal loss, thereby extending the applicability of ECL to colored and optically dense samples and representing a critical advancement toward point-of-care testing of complex real-world solutions.
- 30 October 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectrochemiluminescence Detection in Optically Dense Solutions Through Transparent Graphene Electrodes
Electrochemiluminescence (ECL) enables highly sensitive bioanalytical detection; however, its practical application is constrained by strong optical absorption in colored or optically dense samples, which significantly attenuates the emitted signal. In this study, we address this limitation by employing transparent graphene electrodes for enzyme-mediated ECL detection in optically dense liquids. Glutamate oxidase was immobilized in proximity to the electrode surface to catalyze the conversion of glutamate into hydrogen peroxide, which subsequently initiated luminol-based ECL. The integrated ECL intensity increased with glutamate concentration and followed a Michaelis–Menten–type relationship, confirming that the signal originated from the enzymatic reaction. When evaluated in soy sauce—a dark and strongly absorbing liquid—negligible ECL emission was detected in the conventional through-solution configuration, whereas clear ECL images were obtained when observed through the transparent graphene electrode. This strategy eliminates the need for extensive sample dilution to mitigate absorption-induced signal loss, thereby extending the applicability of ECL to colored and optically dense samples and representing a critical advancement toward point-of-care testing of complex real-world solutions.
- Open Access
- 1 September 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (3)
Modeling responses to heterogeneous adsorption in graphene FET biosensors via circuit simulation
Graphene field-effect transistors (GFETs) have emerged as highly promising platforms for biosensing applications owing to their exceptional sensitivity and capability for label-free detection. However, interpreting their transfer characteristics remains challenging, primarily because of complex signal variations induced by spatially heterogeneous biomolecular adsorption. In this study, we modeled the heterogeneous graphene channel as a resistor grid network to examine how local modulation of carrier density influences the electrical behavior of GFETs. Our simulations replicated the nonlinear and non-monotonic variations observed in RDS–VGS curves characteristics following biomolecular adsorption. Notably, the peak voltage shift (ΔVpeak) and resistance change (ΔRpeak) exhibited nontrivial dependencies on the adsorption ratio. These findings indicate that conventional metrics, such as the charge neutrality point, are inadequate for reliably quantifying adsorption levels under heterogeneous conditions. The proposed approach offers a fundamental framework for understanding signal variability in GFET-based biosensors and for guiding the development of more robust sensing strategies.
- 1 September 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (3)
Open AccessModeling responses to heterogeneous adsorption in graphene FET biosensors via circuit simulation
Graphene field-effect transistors (GFETs) have emerged as highly promising platforms for biosensing applications owing to their exceptional sensitivity and capability for label-free detection. However, interpreting their transfer characteristics remains challenging, primarily because of complex signal variations induced by spatially heterogeneous biomolecular adsorption. In this study, we modeled the heterogeneous graphene channel as a resistor grid network to examine how local modulation of carrier density influences the electrical behavior of GFETs. Our simulations replicated the nonlinear and non-monotonic variations observed in RDS–VGS curves characteristics following biomolecular adsorption. Notably, the peak voltage shift (ΔVpeak) and resistance change (ΔRpeak) exhibited nontrivial dependencies on the adsorption ratio. These findings indicate that conventional metrics, such as the charge neutrality point, are inadequate for reliably quantifying adsorption levels under heterogeneous conditions. The proposed approach offers a fundamental framework for understanding signal variability in GFET-based biosensors and for guiding the development of more robust sensing strategies.
- Open Access
- 1 July 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (7) , 076501
Effect of poly-L-lysine for graphene FET biosensor in acetate buffer for highly sensitive detection of SARS-CoV-2
To increase the sensitivity of the graphene Field effect transistor (GFET) for viral detection, an acetate buffer at pH 4 was used instead of the conventional phosphate-buffer saline (PBS) at pH 7. We hypothesize that SARS-CoV-2 carries more positive charges in the acetate buffer, as its pH is further from the isoelectric point of SARS-CoV-2 (pI 5.2–6.0) compared to that of PBS. Additionally, GFET measurement results with and without poly-L-lysine (PLL) modification were compared. The dependence of sensitivity on the surface charge of graphene was estimated by solving the Poisson–Boltzmann equation, and the effect of PLL modification on this dependence was discussed.
- 1 July 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (7) , 076501
Open AccessEffect of poly-L-lysine for graphene FET biosensor in acetate buffer for highly sensitive detection of SARS-CoV-2
To increase the sensitivity of the graphene Field effect transistor (GFET) for viral detection, an acetate buffer at pH 4 was used instead of the conventional phosphate-buffer saline (PBS) at pH 7. We hypothesize that SARS-CoV-2 carries more positive charges in the acetate buffer, as its pH is further from the isoelectric point of SARS-CoV-2 (pI 5.2–6.0) compared to that of PBS. Additionally, GFET measurement results with and without poly-L-lysine (PLL) modification were compared. The dependence of sensitivity on the surface charge of graphene was estimated by solving the Poisson–Boltzmann equation, and the effect of PLL modification on this dependence was discussed.
- Open Access
- 1 February 2025
- Published by IOP Publishing in Applied Physics Express
- Vol. 18 (2) , 025003
Impacts of capacitive current on electrolyte-gated graphene field-effect transistor arrays
We investigate the effect of gate-source current (I GS) on variations in the Dirac point voltage (V DP) in electrolyte-gated graphene field-effect transistor (EG-GFET) arrays through a time-resolved analysis of I GS and an equivalent circuit model. Source/drain electrodes exposed to the electrolyte induce a substantial capacitive current and a prolonged charging duration of the electric double-layer capacitance, which leads to a position-dependent V DP variation relative to the gate electrode. The electrode-passivation alleviates the variation by significantly reducing I GS and associated charging time. These findings offer critical insights for the design of integrated EG-GFET arrays.
- 1 February 2025
- Published by IOP Publishing in Applied Physics Express
- Vol. 18 (2) , 025003
Open AccessImpacts of capacitive current on electrolyte-gated graphene field-effect transistor arrays
We investigate the effect of gate-source current (I GS) on variations in the Dirac point voltage (V DP) in electrolyte-gated graphene field-effect transistor (EG-GFET) arrays through a time-resolved analysis of I GS and an equivalent circuit model. Source/drain electrodes exposed to the electrolyte induce a substantial capacitive current and a prolonged charging duration of the electric double-layer capacitance, which leads to a position-dependent V DP variation relative to the gate electrode. The electrode-passivation alleviates the variation by significantly reducing I GS and associated charging time. These findings offer critical insights for the design of integrated EG-GFET arrays.
- Open Access
- 30 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (3) , 1209-1216
Quality Control of Graphene Field-Effect Transistor Arrays Using Slit-Scanning Raman Microscopy
- 30 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (3) , 1209-1216
Open AccessQuality Control of Graphene Field-Effect Transistor Arrays Using Slit-Scanning Raman Microscopy
- Open Access
- 21 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Quality Control of Graphene Field-Effect Transistor Arrays Using Slit-Scanning Raman Microscopy
Large-scale graphene films enable the integration of graphene field-effect transistor (GFET) arrays onto chips. However, the transfer characteristics display variability across the array. This significant statistical variation in graphene quality, combined with the lack of standardized protocols, poses a major challenge to commercialization. In this study, we present a rapid, extensive, and high-resolution inspection technique using slit-scanning Raman microscopy. Raman imaging of all GFETs in the arrays were performed before conducting electrical measurements. The G-band and 2D-band peak positions were used to determine the hole carrier density (nH) in the GFETs. Variations in nH values across the arrays correlated with the VDP values, a critical parameter of FET performance, validating this approach as an inspection method. Moreover, Raman peaks were tracked across 100 GFETs at different processing stages, revealing that spatial variations originated during the wet-transfer process. This method is vital for the scalable manufacturing of graphene devices.
- 21 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessQuality Control of Graphene Field-Effect Transistor Arrays Using Slit-Scanning Raman Microscopy
Large-scale graphene films enable the integration of graphene field-effect transistor (GFET) arrays onto chips. However, the transfer characteristics display variability across the array. This significant statistical variation in graphene quality, combined with the lack of standardized protocols, poses a major challenge to commercialization. In this study, we present a rapid, extensive, and high-resolution inspection technique using slit-scanning Raman microscopy. Raman imaging of all GFETs in the arrays were performed before conducting electrical measurements. The G-band and 2D-band peak positions were used to determine the hole carrier density (nH) in the GFETs. Variations in nH values across the arrays correlated with the VDP values, a critical parameter of FET performance, validating this approach as an inspection method. Moreover, Raman peaks were tracked across 100 GFETs at different processing stages, revealing that spatial variations originated during the wet-transfer process. This method is vital for the scalable manufacturing of graphene devices.
- 1 April 2024
- Published by IOP Publishing in Applied Physics Express
- Vol. 17 (4) , 049401
Erratum: Drift suppression of solution-gated graphene field-effect transistors through electrolyte submersion [Appl. Phys. Express 17 045002 (2024)]
- 1 April 2024
- Published by IOP Publishing in Applied Physics Express
- Vol. 17 (4) , 049401
Erratum: Drift suppression of solution-gated graphene field-effect transistors through electrolyte submersion [Appl. Phys. Express 17 045002 (2024)]
- Open Access
- 1 April 2024
- Published by IOP Publishing in Applied Physics Express
- Vol. 17 (4) , 045002
Drift suppression of solution-gated graphene field-effect transistors through electrolyte submersion
In solution-gated graphene FETs (SG-GFETs), cations in electrolyte solutions can intercalate between graphene and SiO2. Such permeation affects substrate-induced hole doping effects, resulting in drifts in the charge neutrality point (CNP) of SG-GFETs. In this study, we investigated the effect of submerging GFETs in electrolyte solutions on CNP values. The results revealed that the CNP decreased considerably from approximately 180 mV to nearly zero with the increase in the immersion period. The CNP drifts during electrical measurements were also suppressed by the prolonged submersion. These insights can be used for developing improved SG-GFETs.
- 1 April 2024
- Published by IOP Publishing in Applied Physics Express
- Vol. 17 (4) , 045002
Open AccessDrift suppression of solution-gated graphene field-effect transistors through electrolyte submersion
In solution-gated graphene FETs (SG-GFETs), cations in electrolyte solutions can intercalate between graphene and SiO2. Such permeation affects substrate-induced hole doping effects, resulting in drifts in the charge neutrality point (CNP) of SG-GFETs. In this study, we investigated the effect of submerging GFETs in electrolyte solutions on CNP values. The results revealed that the CNP decreased considerably from approximately 180 mV to nearly zero with the increase in the immersion period. The CNP drifts during electrical measurements were also suppressed by the prolonged submersion. These insights can be used for developing improved SG-GFETs.
- Open Access
- 23 March 2024
- Published by The Electrochemical Society of Japan in Electrochemistry
- Vol. 92 (3) , 037006
Graphene Field-Effect Transistors with Surface-Charge Modulation for C-Reactive Protein Detection in Artificial Saliva
Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.
- 23 March 2024
- Published by The Electrochemical Society of Japan in Electrochemistry
- Vol. 92 (3) , 037006
Open AccessGraphene Field-Effect Transistors with Surface-Charge Modulation for C-Reactive Protein Detection in Artificial Saliva
Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.