BCBektas Colak

Bektas Colak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bektas Colak has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrawideband Noise Inhibition by Multiple Tunable PEC-PMC Sub-Cavities

    by Muhammet Hilmi Nisanci, Bektas Colak, Francesco de Paulis

    The reduction of electromagnetic coupling and interference is a major concern in metallic enclosures and packages. Cavity resonances act as effective coupling path transferring noise from the aggressor source to the victim device or interconnect. This paper presents an effective solution for inhibiting the noise propagation at the cavity resonances by combining the use of multiple adjacent sub-cavities characterized by tuning capability. Each sub-cavity includes an array of metal pins for realizing a Perfect Magnetic Conductor (PMC) surface whose effectiveness and corresponding cavity bandgap depends on the pin length. A moving plate is applied to each sub-cavity for regulating the pin length independently from other sub-cavities. The manufacturing tolerances require gaps between adjacent moving parts, thus allowing field leakage and possibly invalidating the ideal ultra-wideband response. A deep analysis on the impact of such gasp is carried out to demonstrate the effectiveness of the proposed solution beside although unexpected low-amplitude resonances may occur within the bandgap due to the tolerance gaps. An experimental validation is carried out covering the most representative modelled cases, further confirming the applicability and reliability of the proposed solution.

  • PCB soğutucuların besleme noktasına göre elektromanyetik girişim davranışlarının 1-10 GHz bandında deneysel olarak incelenmesi

    by Alpaslan Bozkurt Karaman, Bahadır BAŞYİĞİT, Habib Doğan, Abdullah Genç, Atalay Kocakuşak, Bektaş ÇOLAK, Selçuk Helhel

    PCB devre elemanlarının çalışma frekanslarındaki artış sonucu devrenin minyatürleşmesi, ortamdaki ısı miktarını daha fazla arttırır. Artan ısı miktarının transferi için metal soğutucular yaygın olarak kullanılır. Ancak soğutucular, belli frekanslarda yayılan elektromanyetik (EM) emisyona neden olurlar. Bu emisyon, soğutucu çevresindeki devre elemanlarının çalışma performansını olumsuz etkiler. Bu çalışmada, eşit taban alanına sahip dikdörtgen ve dairesel soğutuculardaki farklı besleme noktalarının, EM davranışları üzerindeki etkisi 1-10 GHz bandında incelenmiştir. Yansıma katsayısı, EM emisyon, normalize ışıma örüntüsü, ve E-alan dağılımları elde edilmiştir. Benzetim ve ölçüm sonuçları birbirleriyle uyumludur. Dikdörtgen soğutucuda 1. ve 2. besleme noktaları için ilk rezonans frekansı 3 GHz olup bu frekanstaki yansıma katsayısı değerleri sırasıyla -10,1 ve -12,3’dür. Dairesel soğutucuda 3. ve 4. besleme noktaları için ilk rezonans frekansı 2,2 GHz olup bu frekanstaki yansıma katsayısı değerleri sırasıyla -14,9 ve -17,3’dür. Ayrıca, dairesel soğutucularda 1,3-3,9 GHz ve 5,8-10 GHz frekans bantlarında 1. besleme noktası için yayılan emisyon, diğer besleme noktalarına göre ~2-8 dBmV/m daha az olduğu için tercih edilmelidir. Dikdörtgen soğutucularda 1-2 GHz ve 6-10 GHz frekans bantlarında 1. ve 2. besleme noktası için yayılan emisyon ~5-6 dBmV/m daha az olduğu için tercih edilmelidir. Sonuç olarak, her iki soğutucu merkezden beslendiğinde daha az emisyon yaydığı için elemanların soğutucu merkezine yerleştirilmesi önerilir.


  • Measuring and modelling the complex-permittivity of hemp plant (Cannabis Sativa) at X band for microwave remote sensing

    by Abdullah Genc, I. Bahadir Basyigit, Habib Dogan, Bektas Colak

    It is vital to determine the dielectric characterization of hemp plant (Cannabis Sativa) for microwave remote sensing to increase its accuracy and to improve algorithms for satellite data interpretation. For that, this study provides the measurement results of complex permittivity of hemp stems and leaves in terms of various moisture contents (MC) in 8–12.4 GHz in a laboratory with a temperature of 25°C and a relative humidity of 59%. With the measurement data, the dielectric properties are modelled as a second-order polynomial function based on a curve-fitting method depending on the frequency and MC. For hemp stems and leaves with various MC, while the real part of the relative complex permittivity ( ε′) ranges between 2.1–7.2 and 1.5–6.1, the imaginary part of that ( ε″) varies in 0.3–4.5 and 0.2–4.2, respectively. The measured and modelled results are compatible with each other.


  • Open Access

    Scalar Dielectric Constant Extraction of Planar Materials from Reflection Measurements

    by Bektaş ÇOLAK

    Industrial plastics are widely used in warfare electromechanical systems to protect the internal electronic circuitry from environmental effects. Depending the purpose of the warfare system, the surface interaction with electromagnetic fields play a key role and the main parameter that determines reflection and the shielding of the electromagnetic fields from material surface is the dielectric constant of the material itself. In this paper, extraction of scalar dielectric constant from electromagnetic reflection measurement using an alternative two standard calibration technique in a low cost aluminum compact chamber is obtained. Calibration technique uses time domain measurements and converts them to frequency domain. Especially in R&D phase of electromechanical integration of warfare systems, this technique is quite useful where the exact values of dielectric constants of planar industrial plastics are not required. Obtained reflection coefficient error level is 0.67dB for 10mm while it reaches 1.62dB for 40mm thickness materials. It is shown that calculated values are in good agreement with the reference measurement method performed by precision airline setup Agilent 85050C.


  • Moisture content effect of banana leaves to radio frequency absorbing

    by Bektas Colak

    The aim of this paper is to express the importance of the moisture content of banana leaves to the evaluation of radio frequency (RF) absorbing performance. Radar absorbing material (RAM) is generally used in electromagnetic compatibility chambers to minimize reflections within the chamber. These materials also reduce the radar traces of air elements by minimizing RF radiation in stealth technology. Chemical substances that are used in fabricating RAM with pyramidal shape are neither cheap nor harmless to the environment. So, vegetable wastes such as bananas, coconut, and rice are studied to use as RAM. In this study, transmission line technique has been used to measure dielectric properties of the sample (banana leaves) in 8.2‐12.4 GHz. It was concluded that dried banana leaves are so sensitive to environmental moisture and the RAM produced from banana leaves gives different return loss values relative to the moisture content of the sample. The water content of the sample is reduced by 5.0% and 4.9%, respectively. In this case, there is nearly 16% and 12% reduction on relatively dielectric constant, about 54% and 33% reduction on dielectric loss, finally approximately 56% and 31% reduction on return loss.


  • A new error reduction technique for reflection coefficient measurements for use in quick laboratory tests

    by Bektaş Çolak, Selçuk Helhel

    Reflection coefficient measurement is one of those fundamental methods for determining the performance of radar absorber materials, and reflections due to these measurements are originated from the discontinuities in the measurement system and they result in error. In this paper, a new technique for the calibration of the scalar reflection coefficient measurements in the frequency range of 3-18 GHz in a portable two sectioned metallic chamber is being proposed for use in quick laboratory tests with reasonable error (redacted error). Calibration measurements are performed in frequency domain and transformed to time domain for further calculation. As opposed to majority of the reflection measurement systems which utilize three calibration standards, the calibration performed in this work is based on only two calibration standards. Proposed technique exhibits a good agreement with the theoretical values for especially in compact chambers where plane-wave conditions are not fully satisfied, and it is not in need of any complex time gating process. Furthermore it does not require considering the phase differences which occurs at the measurement plane, providing a cheap and faster solution, reducing time and complexity in characterization of radar absorber materials. This technique with the mentioned test setup could supply scalar reflection coefficient measurements with overall 0,55dB error level and useful for practical applications where high level of accuracy is not required.


  • Retracted

    Notice of Retraction: Carbon-Reinforced Flexible Band-Stop Frequency Selective Surface Design

    by Muhammet Hilmi Nisanci, Ahmet Yahya Tesneli, Nigar Berna Tesneli, Bektas Colak, Francesco de Paulis, Antonio Orlandi

    In this letter, the effect of fiber material on the electrical performance of the frequency selective surface is investigated based on a novel three-dimensional band-stop structure consisting of an array of finite conductive cylindrical fibers embedded in a dielectric host material. For this purpose, aluminum and carbon materials are considered for the fiber-reinforced and their effects on the operating frequency are discussed. The design parameter values of the proposed surface are obtained from an optimization tool. Moreover, in this study, a flexible and bendable FSS with carbon fibers is also proposed for applications of curved radome surfaces. Finally, the proposed surfaces with different fiber materials are manufactured and experimentally tested in free space to verify the design.