Rajiv Nandan Rai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rajiv Nandan Rai has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Garima Sharma
Subir Chowdhury School of Quality and Reliability, Indian Institute of Technology Kharagpur, Kharagpur, India
3 shared publications - Sanjay Kumar Chaturvedi
Subir Chowdhury School of Quality and Reliability, Indian Institute of Technology Kharagpur
3 shared publications - Anwesa Kar
Subir Chowdhury School of Quality and Reliability, Indian Institute of Technology Kharagpur
1 shared publication - Garima Sharma
Indian Inst Technol IIT Kharagpur, Subir Chowdhury Sch Qual & Reliabil, Kharagpur, W Bengal, India
1 shared publication Harshal Patil
Subir Chowdhury School of Quality and Reliability, Indian Institute of Technology, Kharagpur, West Bengal, India
1 shared publication- K. Giri
Indian Institute of Technology
1 shared publication
Latest Publications
- 22 June 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (5) , 055005
Numerical and experimental investigation of residual stress polarity and distortion evolution in laser powder bed fusion of IN718 spur gears
Residual stress and distortion remain critical challenges in the laser powder bed fusion (L-PBF) additive manufacturing of complex load-bearing components such as spur gears, particularly for high-performance alloys like Inconel 718 (IN718). In this study, a comprehensive numerical-experimental framework is developed to investigate the evolution of residual stress and deformation in an L-PBF-manufactured IN718 spur gear, with explicit consideration of process parameters, thermal history, and geometric constraints. A thermo-mechanical simulation strategy was implemented using ansys additive print to model layer-wise heat transfer, stress evolution, and distortion. Two contrasting parameter sets were considered, involving variations in laser power, layer thickness, scan speed, scan orientation, and bed temperature. Spatial distributions of normal and shear stress components, Von Mises equivalent stress, and maximum deformation were analyzed along the build height to elucidate stress polarity, accumulation mechanisms, and distortion sensitivity. Simulation results reveal a pronounced transition from a compression-dominated residual stress field under higher energy input and elevated bed temperature to a tensile-dominated stress state under reduced thermal buffering and orthogonal scan rotation. The adverse parameter set resulted in a 10.5% increase in peak residual stress and nearly a fivefold rise in deformation, highlighting the compounded influence of layer thickness, scan orientation, and substrate temperature. Correlation analysis further demonstrates that build-direction stress components strongly govern residual stress accumulation, while deformation shows limited coupling with in-plane stresses. Experimental validation was conducted on an IN718 spur gear fabricated using optimized parameters on an EOS M280 system. X-ray diffraction (sin 2 ψ) measurements confirmed a compressive surface residual stress state (588 MPa), closely aligning with the numerically predicted low-stress regime. Dimensional inspection indicated excellent geometric fidelity, with a maximum deviation of 0.20 mm. Comparative stress–deformation performance mapping demonstrates that the experimental build occupies a favorable low-stress, low-distortion domain, validating the predictive capability of the simulation framework. The proposed integrated methodology provides robust insights for process parameter selection and offers a reliable pathway for residual stress mitigation and distortion.
- 22 June 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (5) , 055005
Numerical and experimental investigation of residual stress polarity and distortion evolution in laser powder bed fusion of IN718 spur gears
Residual stress and distortion remain critical challenges in the laser powder bed fusion (L-PBF) additive manufacturing of complex load-bearing components such as spur gears, particularly for high-performance alloys like Inconel 718 (IN718). In this study, a comprehensive numerical-experimental framework is developed to investigate the evolution of residual stress and deformation in an L-PBF-manufactured IN718 spur gear, with explicit consideration of process parameters, thermal history, and geometric constraints. A thermo-mechanical simulation strategy was implemented using ansys additive print to model layer-wise heat transfer, stress evolution, and distortion. Two contrasting parameter sets were considered, involving variations in laser power, layer thickness, scan speed, scan orientation, and bed temperature. Spatial distributions of normal and shear stress components, Von Mises equivalent stress, and maximum deformation were analyzed along the build height to elucidate stress polarity, accumulation mechanisms, and distortion sensitivity. Simulation results reveal a pronounced transition from a compression-dominated residual stress field under higher energy input and elevated bed temperature to a tensile-dominated stress state under reduced thermal buffering and orthogonal scan rotation. The adverse parameter set resulted in a 10.5% increase in peak residual stress and nearly a fivefold rise in deformation, highlighting the compounded influence of layer thickness, scan orientation, and substrate temperature. Correlation analysis further demonstrates that build-direction stress components strongly govern residual stress accumulation, while deformation shows limited coupling with in-plane stresses. Experimental validation was conducted on an IN718 spur gear fabricated using optimized parameters on an EOS M280 system. X-ray diffraction (sin 2 ψ) measurements confirmed a compressive surface residual stress state (588 MPa), closely aligning with the numerically predicted low-stress regime. Dimensional inspection indicated excellent geometric fidelity, with a maximum deviation of 0.20 mm. Comparative stress–deformation performance mapping demonstrates that the experimental build occupies a favorable low-stress, low-distortion domain, validating the predictive capability of the simulation framework. The proposed integrated methodology provides robust insights for process parameter selection and offers a reliable pathway for residual stress mitigation and distortion.
- 2 June 2026
- Published by Springer Nature
- p. 193-207
Maintainability Attributes and Comparative Analysis: A Case Study on Aero Engines
- 2 June 2026
- Published by Springer Nature
- p. 193-207
Maintainability Attributes and Comparative Analysis: A Case Study on Aero Engines
- 2 June 2026
- Published by Springer Nature
- p. 77-86
Reliability Centric Six Sigma Evaluation Approach for Manufacturing Process
- 2 June 2026
- Published by Springer Nature
- p. 77-86
Reliability Centric Six Sigma Evaluation Approach for Manufacturing Process
- 3 January 2025
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 13 (1) , 1-25
A Novel Methodology for Chipped Teeth and Worn Tooth Gear Fault Detection Using Minimum Entropy Deconvolution and CEEMDAN
- 3 January 2025
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 13 (1) , 1-25
A Novel Methodology for Chipped Teeth and Worn Tooth Gear Fault Detection Using Minimum Entropy Deconvolution and CEEMDAN
- 1 August 2024
- Published by Ram Arti Publishers in International Journal of Mathematical, Engineering and Management Sciences
- Vol. 9 (4) , 756-778
Reliability Analysis of Cutting Tools for Industrial Applications: An Integrated AHP-RSM-PHM Approach
In manufacturing industries, reliability analysis of cutting tools is of paramount importance, as their frequent failures may result in enhanced downtime of production lines, leading to reduced throughput, enhanced process cycle times, and low profits. There are numerous factors that govern the desired operations of cutting tools, e.g., tool cutting speed, feed, depth of cut, and many others. Existing literature on cutting tools’ reliability estimation emphasizes mainly three variables, as mentioned earlier while neglecting other important factors. Including a greater number of factors in the process of estimating reliability increases the number of covariates, hence rendering the data acquisition costlier and estimation models highly complex. This work initially utilizes Analytical Hierarchy Process (AHP) to assess the importance of various factors that are responsible for the cutting tool’s performance, followed by the reliability estimation of the cutting tools using proportional hazards model (PHM) considering the four “critical to reliability” factors as obtained through AHP as covariates. The proposed method also helps in determining the relationship of these sub-factors with the hazard rate and reliability of the cutting tools. Experimental results are then used to verify the model’s predictions through response surface methodology (RSM) and Weibull fit. Furthermore, the paper also presents a proposed technique to estimate the required number of cutting tools for one machine per day and the number of job completions that can be an essential takeaway for various industries. Thus, this research paper proposes an integrated AHP-RSM-PHM based approach for a comprehensive reliability analysis of cutting tools.
- 1 August 2024
- Published by Ram Arti Publishers in International Journal of Mathematical, Engineering and Management Sciences
- Vol. 9 (4) , 756-778
Reliability Analysis of Cutting Tools for Industrial Applications: An Integrated AHP-RSM-PHM Approach
In manufacturing industries, reliability analysis of cutting tools is of paramount importance, as their frequent failures may result in enhanced downtime of production lines, leading to reduced throughput, enhanced process cycle times, and low profits. There are numerous factors that govern the desired operations of cutting tools, e.g., tool cutting speed, feed, depth of cut, and many others. Existing literature on cutting tools’ reliability estimation emphasizes mainly three variables, as mentioned earlier while neglecting other important factors. Including a greater number of factors in the process of estimating reliability increases the number of covariates, hence rendering the data acquisition costlier and estimation models highly complex. This work initially utilizes Analytical Hierarchy Process (AHP) to assess the importance of various factors that are responsible for the cutting tool’s performance, followed by the reliability estimation of the cutting tools using proportional hazards model (PHM) considering the four “critical to reliability” factors as obtained through AHP as covariates. The proposed method also helps in determining the relationship of these sub-factors with the hazard rate and reliability of the cutting tools. Experimental results are then used to verify the model’s predictions through response surface methodology (RSM) and Weibull fit. Furthermore, the paper also presents a proposed technique to estimate the required number of cutting tools for one machine per day and the number of job completions that can be an essential takeaway for various industries. Thus, this research paper proposes an integrated AHP-RSM-PHM based approach for a comprehensive reliability analysis of cutting tools.
- 27 January 2022
- Published by Springer Nature in Life Cycle Reliability and Safety Engineering
- Vol. 11 (1) , 87-103
Imperfect maintenance and proportional hazard models: a literature survey from 1965 to 2020
- 27 January 2022
- Published by Springer Nature in Life Cycle Reliability and Safety Engineering
- Vol. 11 (1) , 87-103
Imperfect maintenance and proportional hazard models: a literature survey from 1965 to 2020
- 1 February 2021
- Published by Ram Arti Publishers in International Journal of Mathematical, Engineering and Management Sciences
- Vol. 6 (1) , 193-206
Age Based Overhaul Policy for Multiple Repairable Systems with Imperfect Maintenance: Case Study of Aero Engines
Reliability analysis of complex multiple repairable systems (MRS) such as aero engines, rolling stocks and nuclear power plants has always been an area of interest for the research fraternity. An appropriate age based overhaul maintenance policy for such systems can provide impetus to the operations. The paper proposes two different age based maintenance policies; Policy-I and Policy-II, to evaluate the overhaul time of an aero engine, where Policy-I considers MRS with imperfect corrective maintenance (CM), whereas Policy-II examines MRS with both imperfect CM and preventive maintenance (PM). The paper then provides a spare parts estimation model for both the policies. The developed policies and spares parts model are validated by considering field failure data of aero engines as a case and the obtained results are compared with the existing time based maintenance policy used for aero engines. The paper recommends the best policy to be used for MRS in general and the considered case in particular.
- 1 February 2021
- Published by Ram Arti Publishers in International Journal of Mathematical, Engineering and Management Sciences
- Vol. 6 (1) , 193-206
Age Based Overhaul Policy for Multiple Repairable Systems with Imperfect Maintenance: Case Study of Aero Engines
Reliability analysis of complex multiple repairable systems (MRS) such as aero engines, rolling stocks and nuclear power plants has always been an area of interest for the research fraternity. An appropriate age based overhaul maintenance policy for such systems can provide impetus to the operations. The paper proposes two different age based maintenance policies; Policy-I and Policy-II, to evaluate the overhaul time of an aero engine, where Policy-I considers MRS with imperfect corrective maintenance (CM), whereas Policy-II examines MRS with both imperfect CM and preventive maintenance (PM). The paper then provides a spare parts estimation model for both the policies. The developed policies and spares parts model are validated by considering field failure data of aero engines as a case and the obtained results are compared with the existing time based maintenance policy used for aero engines. The paper recommends the best policy to be used for MRS in general and the considered case in particular.