Ivan Yatchev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ivan Yatchev has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Iosko Balabozov
Faculty of Electrical Engineering, Technical University of Sofia, Sofia, 1156, Bulgaria
4 shared publications - Mehmet Sen
Department of Electrics and Energy, Technical Sciences Vocational School, Uludağ University, 16059 Bursa, Türkiye
2 shared publications - Dian Malamov
Department of Communications and Power Engineering, University of Plovdiv Paisii Hilendarski, 24 Tzar Asen Str., 4000 Plovdiv, Bulgaria
1 shared publication - Ivan Hadzhiev
Department of Electrical Engineering, Technical University of Sofia, Plovdiv Branch, 25 Tsanko Dyustabanov Str., 4000 Plovdiv, Bulgaria
1 shared publication Ivan Kostov
1 shared publication- Ivan Kostov
Faculty of Electrical Engineering, Tehcnical University of Sofia, 1000 Sofia, Bulgaria
1 shared publication
Latest Publications
- Open Access
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 618 (1) , 012025
Analysis of the influence of some factors on the contact resistance of bolted busbar connections
The paper presents an experimental setup and a method for determining the contact resistance between busbars at a given contact force. Experiments have been conducted by means of an experimental setup, developed for the purpose of studying the influence of the contact force on the contact resistance between busbars with cross-sectional area of 60x6 mm. The study has been performed for two types of bolted connections, complying with DIN 43673, which have been studied for both copper and aluminum busbars.
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 618 (1) , 012025
Open AccessAnalysis of the influence of some factors on the contact resistance of bolted busbar connections
The paper presents an experimental setup and a method for determining the contact resistance between busbars at a given contact force. Experiments have been conducted by means of an experimental setup, developed for the purpose of studying the influence of the contact force on the contact resistance between busbars with cross-sectional area of 60x6 mm. The study has been performed for two types of bolted connections, complying with DIN 43673, which have been studied for both copper and aluminum busbars.
- 27 July 2018
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 37 (4) , 1481-1488
Influence of magnetic concentrator on Hall effect based current sensor
Purpose: The purpose of the paper is to clarify the influence of introducing magnetic concentrators on the performance of Hall effect based current sensors and to obtain dependencies of the sensor characteristics on the conductor position. Design/methodology/approach: The finite element method and Comsol software are used for analysis of the three-dimensional magnetic field of the constructions of Hall effect based current sensor with different types of magnetic concentrators – closed-core (of rectangular and toroidal type) and open-core of toroidal type – with additional larger air gap. The Hall plate is also included in the model with its real dimensions and the magnetic flux density is obtained by integrating over its volume. Findings: It has been found that there is dependence of the output signal (proportional to the magnetic flux density) of Hall effect based current sensor with both closed- and open-core magnetic concentrators on the position of the current carrying conductor. Distribution of the magnetic flux density and dependencies of its value in the Hall plate on the conductor position and on the additional air gap have been obtained. Optimization is carried out with respect to the additional air gap and cross-section dimensions of the concentrator. Originality/value: Estimation of the influence of the introducing magnetic concentrators is made with respect to relationships between the output signal and conductor position for different constructions of the magnetic core of the concentrators.
- 27 July 2018
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 37 (4) , 1481-1488
Influence of magnetic concentrator on Hall effect based current sensor
Purpose: The purpose of the paper is to clarify the influence of introducing magnetic concentrators on the performance of Hall effect based current sensors and to obtain dependencies of the sensor characteristics on the conductor position. Design/methodology/approach: The finite element method and Comsol software are used for analysis of the three-dimensional magnetic field of the constructions of Hall effect based current sensor with different types of magnetic concentrators – closed-core (of rectangular and toroidal type) and open-core of toroidal type – with additional larger air gap. The Hall plate is also included in the model with its real dimensions and the magnetic flux density is obtained by integrating over its volume. Findings: It has been found that there is dependence of the output signal (proportional to the magnetic flux density) of Hall effect based current sensor with both closed- and open-core magnetic concentrators on the position of the current carrying conductor. Distribution of the magnetic flux density and dependencies of its value in the Hall plate on the conductor position and on the additional air gap have been obtained. Optimization is carried out with respect to the additional air gap and cross-section dimensions of the concentrator. Originality/value: Estimation of the influence of the introducing magnetic concentrators is made with respect to relationships between the output signal and conductor position for different constructions of the magnetic core of the concentrators.
- Open Access
Modelling of a Hall Effect-Based Current Sensor with an Open Core Magnetic Concentrator
The present paper deals with the modelling of a Hall effect current sensor with open core magnetic concentrator. 3D magnetic field modelling is carried out using the finite element method (FEM) and Comsol Multiphysics software. Two rectangular core constructions are considered. Different geometric parameters of the magnetic concentrator are varied and their influence on the sensor characteristic is studied, with the aim of reducing the dependence on the output signal on the distance to the conductor. Of the studied parameters, core window length leads to the most significant change in the sensor characteristic. Future work can include the optimization of the sensor construction.
Open AccessModelling of a Hall Effect-Based Current Sensor with an Open Core Magnetic Concentrator
The present paper deals with the modelling of a Hall effect current sensor with open core magnetic concentrator. 3D magnetic field modelling is carried out using the finite element method (FEM) and Comsol Multiphysics software. Two rectangular core constructions are considered. Different geometric parameters of the magnetic concentrator are varied and their influence on the sensor characteristic is studied, with the aim of reducing the dependence on the output signal on the distance to the conductor. Of the studied parameters, core window length leads to the most significant change in the sensor characteristic. Future work can include the optimization of the sensor construction.
- Open Access
- 1 January 2011
- Published by National Library of Serbia in Facta universitatis - series: Electronics and Energetics
- Vol. 24 (2) , 157-167
Static force characteristics of electromagnetic actuators for Braille screen
Several constructions of electromagnetic actuators with moving permanent magnet for Braille screen are studied. All they are formed from a basic one that consists of two coils, core and moving permanent magnet. The finite element method is used for modeling of the magnetic field and for obtaining the electromagnetic force acting on the mover. The static force-stroke characteristics are obtained for four different constructions of the actuator. The constructions with ferromagnetic disc between the coils ensure greater force than the ones without disc and can reach the required minimum force.
- 1 January 2011
- Published by National Library of Serbia in Facta universitatis - series: Electronics and Energetics
- Vol. 24 (2) , 157-167
Open AccessStatic force characteristics of electromagnetic actuators for Braille screen
Several constructions of electromagnetic actuators with moving permanent magnet for Braille screen are studied. All they are formed from a basic one that consists of two coils, core and moving permanent magnet. The finite element method is used for modeling of the magnetic field and for obtaining the electromagnetic force acting on the mover. The static force-stroke characteristics are obtained for four different constructions of the actuator. The constructions with ferromagnetic disc between the coils ensure greater force than the ones without disc and can reach the required minimum force.
- 1 February 2008
- Published by SAGE Publications in International Journal of Applied Electromagnetics and Mechanics
- Vol. 27 (1-2) , 43-52
Characteristics of a bistable permanent magnet linear actuator with soft magnetic mover
Modelling and characteristics of a newly developed bistable permanent magnet linear actuator are presented. The permanent magnets are fixed and the mover is soft magnetic one. The driving and the holding force can be varied practically independently as they are mainly formed through different air gaps. Static and dynamic characteristics of the actuator are obtained. The static force characteristics are obtained using finite element method for different permanent magnets, different combinations of the two air gaps and different coil currents. Dynamic characteristics are obtained for actuator with ferrite magnets. The results for static and dynamic characteristics are verified experimentally on a prototype of the actuator with ferrite magnets.
- 1 February 2008
- Published by SAGE Publications in International Journal of Applied Electromagnetics and Mechanics
- Vol. 27 (1-2) , 43-52
Characteristics of a bistable permanent magnet linear actuator with soft magnetic mover
Modelling and characteristics of a newly developed bistable permanent magnet linear actuator are presented. The permanent magnets are fixed and the mover is soft magnetic one. The driving and the holding force can be varied practically independently as they are mainly formed through different air gaps. Static and dynamic characteristics of the actuator are obtained. The static force characteristics are obtained using finite element method for different permanent magnets, different combinations of the two air gaps and different coil currents. Dynamic characteristics are obtained for actuator with ferrite magnets. The results for static and dynamic characteristics are verified experimentally on a prototype of the actuator with ferrite magnets.
- Open Access
- 1 January 2008
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 5 (1) , 99-108
3D finite element modeling of a permanent magnet linear actuator
The magnetostatic field and electromagnetic force of a linear actuator with a fixed permanent magnet and soft magnetic mover was studied using the 3D finite element method. The actuator construction is such that its field can be modeled adequately only using 3D analysis. Results were obtained for the magnetic flux density distribution and the electromagnetic force for different positions of the mover for two values of the coil magnetomotive force and two types of permanent magnets.
- 1 January 2008
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 5 (1) , 99-108
Open Access3D finite element modeling of a permanent magnet linear actuator
The magnetostatic field and electromagnetic force of a linear actuator with a fixed permanent magnet and soft magnetic mover was studied using the 3D finite element method. The actuator construction is such that its field can be modeled adequately only using 3D analysis. Results were obtained for the magnetic flux density distribution and the electromagnetic force for different positions of the mover for two values of the coil magnetomotive force and two types of permanent magnets.
- Open Access
- 1 January 2004
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 1 (2) , 207-214
Dynamic characteristics of a bitable linear actuator with moving permanent magnet
The dynamic characteristics of an ax symmetrical linear actuator with axially magnetized moving permanent magnet are obtained using combined field and circuit approach. The magnetic field of the actuator has been analyzed using the finite element method over a current-displacement sampling grid. Two field analyses are carried out for each point of the grid - one for the real system and one for the system where the permanent magnet is considered as a soft magnetic body. For each point of the grid, data for the total flux linkage, electromagnetic force and the coil inductance are extracted from the magnetic field analysis. These data are approximated by bicubic spline functions, which are employed in the solution of the system of ordinary differential equations of the electrical circuit and the mechanical motion. Results are obtained for the time variations of the coil current, mover displacement, mover velocity and electromagnetic force. The results for the current and displacement are verified experimentally.
- 1 January 2004
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 1 (2) , 207-214
Open AccessDynamic characteristics of a bitable linear actuator with moving permanent magnet
The dynamic characteristics of an ax symmetrical linear actuator with axially magnetized moving permanent magnet are obtained using combined field and circuit approach. The magnetic field of the actuator has been analyzed using the finite element method over a current-displacement sampling grid. Two field analyses are carried out for each point of the grid - one for the real system and one for the system where the permanent magnet is considered as a soft magnetic body. For each point of the grid, data for the total flux linkage, electromagnetic force and the coil inductance are extracted from the magnetic field analysis. These data are approximated by bicubic spline functions, which are employed in the solution of the system of ordinary differential equations of the electrical circuit and the mechanical motion. Results are obtained for the time variations of the coil current, mover displacement, mover velocity and electromagnetic force. The results for the current and displacement are verified experimentally.