Iosko Balabozov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Iosko Balabozov has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Ivan Yatchev
Faculty of Electrical Engineering, Technical University of Sofia, Sofia, 1156, Bulgaria
10 shared publications- Ivan Hadzhiev
Department of Electrical Engineering, Technical University of Sofia, Plovdiv Branch, 25 Tsanko Dyustabanov Str., 4000 Plovdiv, Bulgaria
6 shared publications - Ivan Yatchev
Department of Electrical Apparatus, Technical University of Sofia, 8 Kliment Ohridski Blvd, 1000 Sofia, Bulgaria
4 shared publications Krastyo Hinov
Department of Electrical Apparatus, Technical University of Sofia, Sofia, 1000
4 shared publications- Dian Malamov
Technical University of Sofia - Plovdiv Branch, University of Plovdiv Paisii Hilendarski, Technical University of Sofia, Bulgaria
3 shared publications Hartmut Brauer
Technische Universität Ilmenau, Ilmenau, D-98693, Germany
3 shared publications
Latest Publications
- Open Access
Effect of Gear Ratio on the Optimal Geometric Parameters in a Reluctance Magnetic Gear: A Multi-Objective Optimization Study
Reluctance Magnetic Gears (RMGs) represent a cost-effective alternative to conventional magnetic gears, replacing the inner rotor permanent magnets with a toothed ferromagnetic rotor and adopting rectangular instead of arc-shaped magnets on the outer rotor. While these design choices reduce manufacturing complexity and material costs, they inherently introduce higher torque ripple, making simultaneous optimization of average torque and ripple a critical and non-trivial task. In this work, a multi-objective genetic algorithm is applied to four RMG configurations with integer gear ratios GRint equal to 4, 5, 6, and 7, with a fixed inner rotor tooth number n3 equal to 5. Seven design variables are optimized simultaneously: five radial thicknesses and two fill factors. The resulting Pareto fronts quantify the trade-off between average torque and ripple for each configuration. Analysis of the optimal solutions reveals a consistent geometric allocation pattern across all gear ratios, suggesting the existence of a common optimization criterion potentially generalizable to other RMG configurations. The influence of the gear ratio on both torque performance and optimal parameter distribution is discussed in detail.
Open AccessEffect of Gear Ratio on the Optimal Geometric Parameters in a Reluctance Magnetic Gear: A Multi-Objective Optimization Study
Reluctance Magnetic Gears (RMGs) represent a cost-effective alternative to conventional magnetic gears, replacing the inner rotor permanent magnets with a toothed ferromagnetic rotor and adopting rectangular instead of arc-shaped magnets on the outer rotor. While these design choices reduce manufacturing complexity and material costs, they inherently introduce higher torque ripple, making simultaneous optimization of average torque and ripple a critical and non-trivial task. In this work, a multi-objective genetic algorithm is applied to four RMG configurations with integer gear ratios GRint equal to 4, 5, 6, and 7, with a fixed inner rotor tooth number n3 equal to 5. Seven design variables are optimized simultaneously: five radial thicknesses and two fill factors. The resulting Pareto fronts quantify the trade-off between average torque and ripple for each configuration. Analysis of the optimal solutions reveals a consistent geometric allocation pattern across all gear ratios, suggesting the existence of a common optimization criterion potentially generalizable to other RMG configurations. The influence of the gear ratio on both torque performance and optimal parameter distribution is discussed in detail.
- Open Access
- 1 January 2024
- Published by National Library of Serbia in Facta universitatis - series: Electronics and Energetics
- Vol. 37 (2) , 355-368
Experimental and numerical analysis of the influence of the contact resistance in a high-power fuse on its time-current characteristic
This paper presents a study of thermal processes and time-current characteristics of a high-power low-voltage fuse at normal and increased contact resistance. Experimental and numerical studies have been performed. The experimental studies have been carried out by means of an experimental setup, especially developed for the purpose. Temperature measurement has been realised both by a contact thermometer and by a thermovision camera. The finite element method has been used in the numerical study. A computer model of the fuse has been developed in the software product COMSOL. The model reads the thermal processes in the fuse, as well as the heat transfer to the environment, which occurs by radiation and convection. Results about the influence of the contact resistance on the fuse heating and its time-current characteristic have been obtained. The obtained experimental and numerical results have been compared.
- 1 January 2024
- Published by National Library of Serbia in Facta universitatis - series: Electronics and Energetics
- Vol. 37 (2) , 355-368
Open AccessExperimental and numerical analysis of the influence of the contact resistance in a high-power fuse on its time-current characteristic
This paper presents a study of thermal processes and time-current characteristics of a high-power low-voltage fuse at normal and increased contact resistance. Experimental and numerical studies have been performed. The experimental studies have been carried out by means of an experimental setup, especially developed for the purpose. Temperature measurement has been realised both by a contact thermometer and by a thermovision camera. The finite element method has been used in the numerical study. A computer model of the fuse has been developed in the software product COMSOL. The model reads the thermal processes in the fuse, as well as the heat transfer to the environment, which occurs by radiation and convection. Results about the influence of the contact resistance on the fuse heating and its time-current characteristic have been obtained. The obtained experimental and numerical results have been compared.
- Open Access
- 23 June 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 3,p. 3-7
Influence of the shape of the input pulses on the characteristics of hybrid electromagnetic system with magnetic flux modulation
Вступ. У наш час прискорене вдосконалення існуючих і винахід нових матеріалів та обладнання є необхідною умовою вдосконалення відомих електромагнітних конструкцій, що використовуються в різних пристроях, а також для розробки нових виробів. Досліджується нова конструкція гібридної електромагнітної системи з модуляцією магнітного потоку (ГЕСМММ). Конструкція складається з: феромагнітної каркасу з повітряними зазорами, вхідних та вихідних котушок та постійних магнітів. Дві вхідні котушки, підключені до імпульсного джерела живлення, використовуються для зміни шляху постійного магнітного потоку, що створюється постійними магнітами. Вхідні імпульси різної форми подаються на вхідні котушки, а сигнали у вихідних котушках отримуються та порівнюються. Основна мета роботи – знайти форму вхідних імпульсів, що призводить до вищої вихідної потужності в порівнянні з іншими формами. Методи. Метод скінченних елементів та програмне забезпечення COMSOL використовуються для комп'ютерного моделювання запропонованої конструкції, де проводиться аналіз зв'язаних електромагнітного поля та електричного кола. Результати. Реалізовано та досліджено математичну та числову тривимірну модель нової конструкції ГЕСМММ. Модель дозволяє розрахувати та порівняти енергетичну ефективність досліджуваного пристрою, коли застосовуються вхідні імпульси різної форми. Практична цінність. Розроблена комп'ютерна модель дозволяє досліджувати ГЕСМММ та інші електромагнітні пристрої при різних режимах роботи. Вона може бути додатково вдосконалена та використана для пошуку оптимальних параметрів конкретного електромагнітного пристрою.
- 23 June 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 3,p. 3-7
Open AccessInfluence of the shape of the input pulses on the characteristics of hybrid electromagnetic system with magnetic flux modulation
Вступ. У наш час прискорене вдосконалення існуючих і винахід нових матеріалів та обладнання є необхідною умовою вдосконалення відомих електромагнітних конструкцій, що використовуються в різних пристроях, а також для розробки нових виробів. Досліджується нова конструкція гібридної електромагнітної системи з модуляцією магнітного потоку (ГЕСМММ). Конструкція складається з: феромагнітної каркасу з повітряними зазорами, вхідних та вихідних котушок та постійних магнітів. Дві вхідні котушки, підключені до імпульсного джерела живлення, використовуються для зміни шляху постійного магнітного потоку, що створюється постійними магнітами. Вхідні імпульси різної форми подаються на вхідні котушки, а сигнали у вихідних котушках отримуються та порівнюються. Основна мета роботи – знайти форму вхідних імпульсів, що призводить до вищої вихідної потужності в порівнянні з іншими формами. Методи. Метод скінченних елементів та програмне забезпечення COMSOL використовуються для комп'ютерного моделювання запропонованої конструкції, де проводиться аналіз зв'язаних електромагнітного поля та електричного кола. Результати. Реалізовано та досліджено математичну та числову тривимірну модель нової конструкції ГЕСМММ. Модель дозволяє розрахувати та порівняти енергетичну ефективність досліджуваного пристрою, коли застосовуються вхідні імпульси різної форми. Практична цінність. Розроблена комп'ютерна модель дозволяє досліджувати ГЕСМММ та інші електромагнітні пристрої при різних режимах роботи. Вона може бути додатково вдосконалена та використана для пошуку оптимальних параметрів конкретного електромагнітного пристрою.
- Open Access
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 618 (1) , 012025
Analysis of the influence of some factors on the contact resistance of bolted busbar connections
The paper presents an experimental setup and a method for determining the contact resistance between busbars at a given contact force. Experiments have been conducted by means of an experimental setup, developed for the purpose of studying the influence of the contact force on the contact resistance between busbars with cross-sectional area of 60x6 mm. The study has been performed for two types of bolted connections, complying with DIN 43673, which have been studied for both copper and aluminum busbars.
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 618 (1) , 012025
Open AccessAnalysis of the influence of some factors on the contact resistance of bolted busbar connections
The paper presents an experimental setup and a method for determining the contact resistance between busbars at a given contact force. Experiments have been conducted by means of an experimental setup, developed for the purpose of studying the influence of the contact force on the contact resistance between busbars with cross-sectional area of 60x6 mm. The study has been performed for two types of bolted connections, complying with DIN 43673, which have been studied for both copper and aluminum busbars.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Computer Modeling and Experimental Verification of a Hybrid Electromagnetic System with Magnetic Flux Modulation
Finite element analysis of a hybrid electromagnetic system with magnetic flux modulation is carried out. The main idea is to build computer model for studying the main parameters of devices of this type. To ensure reliability of achieved results from the computer model, an experimental prototype of the modelled device is built. Specially designed control and measurement circuits are assembled. The obtained results are compared and analysed.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Computer Modeling and Experimental Verification of a Hybrid Electromagnetic System with Magnetic Flux Modulation
Finite element analysis of a hybrid electromagnetic system with magnetic flux modulation is carried out. The main idea is to build computer model for studying the main parameters of devices of this type. To ensure reliability of achieved results from the computer model, an experimental prototype of the modelled device is built. Specially designed control and measurement circuits are assembled. The obtained results are compared and analysed.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Experimental and Numerical Analysis of the Thermal Field in a High Power Low Voltage Fuse
In this paper, the results from a study of the heating in a high power low voltage fuse are presented. The experimental tests have been conducted with an especially developed experimental installation. Thermocouples of K-type have been used for measuring the temperature. The numerical study has been done with computer model of the fuse made in COMSOL software. Coupled electric-thermal problem is solved. The model takes into account both the heat transfer from the surface of the fuse toward the environment by radiation and convection, and the heat flow, propagating from the current-carrying elements of the fuse toward the connecting conductors. A comparison between the obtained numerical and experimental results, concerning the heating of the fuse has been drawn.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Experimental and Numerical Analysis of the Thermal Field in a High Power Low Voltage Fuse
In this paper, the results from a study of the heating in a high power low voltage fuse are presented. The experimental tests have been conducted with an especially developed experimental installation. Thermocouples of K-type have been used for measuring the temperature. The numerical study has been done with computer model of the fuse made in COMSOL software. Coupled electric-thermal problem is solved. The model takes into account both the heat transfer from the surface of the fuse toward the environment by radiation and convection, and the heat flow, propagating from the current-carrying elements of the fuse toward the connecting conductors. A comparison between the obtained numerical and experimental results, concerning the heating of the fuse has been drawn.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Parametrized Modelling of a Hybrid Electromagnetic System with Magnetic Modulation
Parametrized model of a hybrid electromagnetic system featuring modulation of the magnetic flux has been developed using the finite element method and COMSOL software. The model gives opportunity to study the influence of different geometric and physical parameters on the performance of the system. The system consists of a core, permanent magnet and three coils - one input and two output coils. The input coil is supplied by a pulse voltage source. Active loads are connected to the output coils. The problem has been solved as a coupled problem electromagnetic field - electric circuit one. Results have been obtained for the distribution of the magnetic field and the power of the output coils when varying three geometric parameters. The developed model can serve as a basis for further optimization of the system.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Parametrized Modelling of a Hybrid Electromagnetic System with Magnetic Modulation
Parametrized model of a hybrid electromagnetic system featuring modulation of the magnetic flux has been developed using the finite element method and COMSOL software. The model gives opportunity to study the influence of different geometric and physical parameters on the performance of the system. The system consists of a core, permanent magnet and three coils - one input and two output coils. The input coil is supplied by a pulse voltage source. Active loads are connected to the output coils. The problem has been solved as a coupled problem electromagnetic field - electric circuit one. Results have been obtained for the distribution of the magnetic field and the power of the output coils when varying three geometric parameters. The developed model can serve as a basis for further optimization of the system.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Influence of the Air Gap of Hybrid Systems with Magnetic Flux Modulation
Influence of air gap in the main magnetic path is studied in a hybrid system with magnetic flux modulation. The constant magnetic flux is generated by permanent magnets and additional magnetic field is applied to the system by externally power supplied coils.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Influence of the Air Gap of Hybrid Systems with Magnetic Flux Modulation
Influence of air gap in the main magnetic path is studied in a hybrid system with magnetic flux modulation. The constant magnetic flux is generated by permanent magnets and additional magnetic field is applied to the system by externally power supplied coils.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Experimental Research with Microcontroller System for Defining of Joule Integral of Fuse
In the present work a system using a microcontroller electronic platform in the realization of an experimental determination of a Joule integral of a fuse is presented. An algorithm is proposed based on which software has been developed and a working prototype of a microcontroller system is established.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Experimental Research with Microcontroller System for Defining of Joule Integral of Fuse
In the present work a system using a microcontroller electronic platform in the realization of an experimental determination of a Joule integral of a fuse is presented. An algorithm is proposed based on which software has been developed and a working prototype of a microcontroller system is established.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Experimental Research with Energy Efficient Control System for Polarized Electromagnets
In the work experimental results achieved with an energy efficient control system for polarized electromagnets are presented. Two different circuit implementations of the system are made, and the results are compared. Also, main structure of the experimental system is described.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Experimental Research with Energy Efficient Control System for Polarized Electromagnets
In the work experimental results achieved with an energy efficient control system for polarized electromagnets are presented. Two different circuit implementations of the system are made, and the results are compared. Also, main structure of the experimental system is described.