HIHirokazu Ito

Hirokazu Ito

*This is an algorithmically generated author record based on publicly available information.

Hirokazu Ito has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fatigue Performance of Wet and Dry Pulverized Wood Flour Reinforced PP Composites

    by Minhaz-Ul Haque, Koichi Goda, Hirokazu Ito, Shinji Ogoe, Masaki Okamoto, Tomoyuki Ema, Keiko Kagawa, Hidetaka Nogami

    In this paper, we exclusively studied the effects of dry and wet pulverization of different wood flours on the fatigue performance of polypropylene (PP)/wood flour (WF) composites. Wood flours obtained from cypress and Scots pine trees were pulverized in both dry and wet conditions at two different mill-plate gaps, 200 µm and 350 µm, and were used as reinforcement in PP matrices. Master batches of PP with different types of pulverized WF were compounded before processing in an extruder. The PP/WF composites of initial WF were also prepared for comparison. The prepared composites were analyzed by tensile and fatigue tests. It was found that the tensile properties of wood/polypropylene composites were affected by the pulverization of WF. Fatigue test results displayed that wet pulverization of short cypress flour had a negative effect on the fatigue life of PP/WF composites, while wet pulverization of long cypress flour and pine flour had a positive effect on the fatigue life of PP/WF composites.


  • Effects of Premixing Wood Flour with Compatibilizer with Different Characteristics on the Physical and Mechanical Properties of Wood/Plastic Composites

    by Kazushige Murayama, Yoichi Kojima, Hikaru Kobori, Kenji Aoki, Shigehiko Suzuki, Hirokazu Ito, Shinji Ogoe, Masaki Okamoto, Tomoyuki Ema

    The addition of maleic anhydride (MA)-modified polypropylene (MAPP) as a compatibilizer increases mechanical and physical properties of wood/plastic composites (WPCs). It is thought that MA graft ratio (Gr), molecular weight (weight-average molecular weight [Mw]), and mixing methods of MAPP affect physical and mechanical properties of WPCs. However, evaluation, especially for mixing order, is not enough. The objective of this study was to investigate the effect of Gr and Mw of MAPP and its mixing methods on the mechanical and physical properties of WPCs. Two types of mixing methods were used: mixing the MAPP with the filler using a Henschel mixer before kneading with PP (premixing method) and mixing all of the materials at one time (one-step mixing method). The WPCs made with the premixing method had lower shear viscosity and higher flexural modulus than those made with the one-step mixing method. The particle size, moisture content, and surface morphology of fillers are thought to be more important in determining the shear viscosity of WPCs than the MAPP itself. The highest tensile, impact, and flexural strengths of WPCs were obtained in the WPC with premixing with low-Gr and high-Mw MAPP. It may be due to the effective reaction of the wood flour with MAPP and higher entanglement between the MAPP and PP. These results suggest that the premixing method could improve productivity and mechanical properties of WPCs.


  • Profitable Mass-Production of Acid-Modified Recovered Resins for Value-Added Mechanical Recycling as a Compatibilizer for Composites

    by Yuta Sunaga, Shinji Ogoe, Kenji Aoki, Hirokazu Ito, Yoshikuni Teramoto

    To realize upgrade recycling of commodity-type polyolefin resins, acid modification with maleic anhydride (MAH) and organic peroxide was applied to polypropylene (PP)-rich commercial recovered resins provided by different manufacturers. Modification conditions were established in advance to achieve high MAH grafting level as well as thermal fluidity using a laboratory scale batch kneader. Mass production prototyping with a view of productivity of 100 kg/h was carried out using an anisotropic twin-screw extruder. Transmission electron microscopy demonstrated that different domain structures of the original recovered resins were homogenized by the acid modification process. To evaluate the performance of the obtained acid-modified recovered resins as a compatibilizer, wood/plastic composite (WPC) compounds were prepared by kneading together with wood flour and PP and examined for their mechanical properties. As a result, the bending and impact strengths improved 1.5 times and the tensile strength increased 1.3 times in comparison with those of the composites containing no compatibilizer. We also conducted in 1-t/day mass production prototyping of the WPC compounds using an existing commercial production facility. By estimating the manufacturing costs of the acid-modified recovered resins, the profitability of the production was confirmed.


  • Cellulose Nanofiber as Complete Natural Binder for Particleboard

    by Yoichi Kojima, Naho Kato, Kazuaki Ota, Hikaru Kobori, Shigehiko Suzuki, Kenji Aoki, Hirokazu Ito

    The demand for wood-based materials as an alternative to plywood is increasing, and a synthetic adhesive is typically used for the fabrication of such materials. The identification of replacements for standard adhesives poses a major challenge. In this study, we investigated the mechanical properties of particleboard bonded by cellulose nanofiber (CNF) and compared the mechanical properties of particleboard bonded by CNF with those of particleboard bonded by adhesive. CNF was added together with wood particles during the fabrication process. The target CNF addition amounts were 0, 3, 5, 10, and 20 weight percent. The bending and internal bond strengths of the particleboard with CNF increased, and its water absorption decreased as CNF content increased. The comparison between the boards prepared with adhesives and those with CNF showed that the properties of boards prepared with 20 weight percent CNF were comparable to those of boards prepared with 1 weight percent synthetic adhesive.


  • Mechanical and Physical Properties of Wood–Plastic Composites Containing Cellulose Nanofibers Added to Wood Flour

    by Kazushige Murayama, Momoka Yamamoto, Hikaru Kobori, Yoichi Kojima, Shigehiko Suzuki, Kenji Aoki, Hirokazu Ito, Shinji Ogoe, Masaki Okamoto

    Recently, the usage of wood–plastic composite (WPC) products has increased, mainly for exterior decking. The shape of fillers is one of the important factors deciding the mechanical and physical properties of WPCs. Surface-fibrillated wood flour (WF) improves the mechanical properties of WPCs, although it requires a lot of energy and time to produce the fibrous structure during the pulverization process. Therefore, the adsorptive interaction between cellulose nanofiber (CNF) and WF by hydrogen bonding was investigated. We considered that CNF could form the fibrous structures on the WF surface by mixing CNF and WF. Also, it is thought that the addition of CNF could increase mechanical and physical properties of WPC because CNF has better physical and mechanical properties than most other fibers. The objective of this study was to produce WF-CNF fillers and to evaluate the mechanical and physical properties of WPCs containing WF-CNF fillers. WF-CNF fillers could be produced by freeze-drying after mixing WF, CNF, and water. The fibrous structures on the WF surface were observed through scanning electron microscope images of WF-CNF filler containing 3 weight percent CNF. A WPC with WF-CNF filler containing 22 percent (by weight) WF and 3 percent (by weight) CNF showed improved mechanical properties compared with WPCs without CNF. The water absorption of WPCs containing CNF was found to decrease with increasing CNF content.