Mustafa Günay
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mustafa Günay has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Erdi Korkmaz
Department of Mechanical Engineering, Yildiz Technical University, Besiktas, Istanbul 34349, Turkiye
15 shared publications - Nafiz Yaşar
Kutahya Dumlupinar Universitesi
7 shared publications - Munish Kumar Gupta
Faculty of Mechanical Engineering, Opole University of Technology, Opole, Poland
6 shared publications - Hakan Yurtkuran
Yozgat Bozok Üniversitesi
5 shared publications - Recep Demirsöz
Department of Mechanical Engineering, Karabük University, Karabük, Turkey
4 shared publications - Mehmet Boy
Karabük Üniversitesi
3 shared publications
Latest Publications
- 5 November 2026
- Published by Springer Nature in Neural Computing and Applications
- Vol. 38 (21)
A hybrid ANN-GRA prediction framework for optimizing the balance between surface integrity and energy demand in WEDM of tool steel
- 5 November 2026
- Published by Springer Nature in Neural Computing and Applications
- Vol. 38 (21)
A hybrid ANN-GRA prediction framework for optimizing the balance between surface integrity and energy demand in WEDM of tool steel
- Open Access
Multi-Response Optimization and Predictive Modeling of Drilling Performance in PEEK-CF30 Composites Considering Drill Coating and Cutting Parameters
Carbon fiber-reinforced thermoplastic composite drilling is a secondary manufacturing process because the quality of drilled holes affects assembly system performance, structure, and sustainability. This paper compares all drill coating types and cutting conditions for PEEK-CF30 composite drilling utilizing a hybrid experimental–statistical method. DLC-, TiN-, and TiCN-coated HSS drills, as well as cutting speed and feed rate were tested using the Taguchi L27 design. Performance indicators were measured by including thrust force, surface roughness, drilling torque, and energy consumption. Experimental results showed that increasing cutting speed and feed rate increased the thrust force while decreasing torque and energy consumption. Smearing on the hole surface, chip adhesion, and short fiber adhesion/pull were identified as indicators of poor surface quality, and these occurrences increased with increasing drill coating removal at high cutting parameters. In terms of overall performance, the TiCN-coated drill created the lowest thrust force (50.85 N), surface roughness (1.038 µm), torque (17.54 Ncm), and energy consumption (136.45 J) at high feed conditions. Taguchi-based gray relational analysis methodology revealed that the TiCN-coated drill, a cutting speed of 40 m/min, and a feed rate of 0.1 mm/rev are the optimum parameters. Second-order prediction models developed for all responses proved to have high predictive capabilities with coefficients of determination above 94%. Ultimately, drill coating quality considerably affected surface integrity and drilling energy consumption performance in drilling PEEK-CF30. A hybrid optimization and modeling framework demonstrates that the drill quality cutting parameter will allow for optimum selection to ensure efficient processing of advanced thermoplastic composites.
Open AccessMulti-Response Optimization and Predictive Modeling of Drilling Performance in PEEK-CF30 Composites Considering Drill Coating and Cutting Parameters
Carbon fiber-reinforced thermoplastic composite drilling is a secondary manufacturing process because the quality of drilled holes affects assembly system performance, structure, and sustainability. This paper compares all drill coating types and cutting conditions for PEEK-CF30 composite drilling utilizing a hybrid experimental–statistical method. DLC-, TiN-, and TiCN-coated HSS drills, as well as cutting speed and feed rate were tested using the Taguchi L27 design. Performance indicators were measured by including thrust force, surface roughness, drilling torque, and energy consumption. Experimental results showed that increasing cutting speed and feed rate increased the thrust force while decreasing torque and energy consumption. Smearing on the hole surface, chip adhesion, and short fiber adhesion/pull were identified as indicators of poor surface quality, and these occurrences increased with increasing drill coating removal at high cutting parameters. In terms of overall performance, the TiCN-coated drill created the lowest thrust force (50.85 N), surface roughness (1.038 µm), torque (17.54 Ncm), and energy consumption (136.45 J) at high feed conditions. Taguchi-based gray relational analysis methodology revealed that the TiCN-coated drill, a cutting speed of 40 m/min, and a feed rate of 0.1 mm/rev are the optimum parameters. Second-order prediction models developed for all responses proved to have high predictive capabilities with coefficients of determination above 94%. Ultimately, drill coating quality considerably affected surface integrity and drilling energy consumption performance in drilling PEEK-CF30. A hybrid optimization and modeling framework demonstrates that the drill quality cutting parameter will allow for optimum selection to ensure efficient processing of advanced thermoplastic composites.
- 17 March 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (25) , 1-18
Machine Learning-Driven Prediction and Optimization of Mechanical Properties of Selective Laser Melting-Produced Ti-Grade 5 Implants
- 17 March 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (25) , 1-18
Machine Learning-Driven Prediction and Optimization of Mechanical Properties of Selective Laser Melting-Produced Ti-Grade 5 Implants
- 16 December 2025
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- No. Advanced O
Surface Roughness Analysis in Machining of Stainless Steel by Trochoidal Milling under Dry and MQL Cutting Environment
Trochoidal milling is a machining technique that enables high-efficiency machining of particularly hard-to-cut materials using a specific tool path at high feed and cutting speeds. This research focused on the impacts of dry and MQL milling on surface roughness (Ra) in trochoidal milling groove opening on AISI 304 stainless steel. Experiments were conducted with a TiAlN-coated carbide end mill using parameters such as variable cutting speed, axial depth of cut (ap), and constant feed. Analysis of variance was used for evaluating the effects of the parameters on surface roughness. While surface roughness increased in dry cutting with increasing ap, it decreased in MQL environment. This result was ascribed to the stable cutting process resulting from the MQL application's reduction of friction along the milling cutter edge and the prevention of BUE formation. Based on the results, the minimum Ra value of 0.386 μm was acquired in the MQL cutting environment at a cutting speed of 150 m/min and a ap of 8 mm. According to Ra measurements from four groove surfaces, the surface roughness obtained in the MQL environment was on average 17.5% lower than in dry cutting. According to the ANOVA results, cutting speed was the most effective parameter in trochoidal milling under dry and MQL environments. These results prove the positive effect of the MQL application in trochoidal milling operations on increasing machining efficiency.
- 16 December 2025
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- No. Advanced O
Surface Roughness Analysis in Machining of Stainless Steel by Trochoidal Milling under Dry and MQL Cutting Environment
Trochoidal milling is a machining technique that enables high-efficiency machining of particularly hard-to-cut materials using a specific tool path at high feed and cutting speeds. This research focused on the impacts of dry and MQL milling on surface roughness (Ra) in trochoidal milling groove opening on AISI 304 stainless steel. Experiments were conducted with a TiAlN-coated carbide end mill using parameters such as variable cutting speed, axial depth of cut (ap), and constant feed. Analysis of variance was used for evaluating the effects of the parameters on surface roughness. While surface roughness increased in dry cutting with increasing ap, it decreased in MQL environment. This result was ascribed to the stable cutting process resulting from the MQL application's reduction of friction along the milling cutter edge and the prevention of BUE formation. Based on the results, the minimum Ra value of 0.386 μm was acquired in the MQL cutting environment at a cutting speed of 150 m/min and a ap of 8 mm. According to Ra measurements from four groove surfaces, the surface roughness obtained in the MQL environment was on average 17.5% lower than in dry cutting. According to the ANOVA results, cutting speed was the most effective parameter in trochoidal milling under dry and MQL environments. These results prove the positive effect of the MQL application in trochoidal milling operations on increasing machining efficiency.
- 1 August 2025
- Published by Springer Nature in Sādhanā
- Vol. 50 (3) , 1-13
Comprehensive analysis of FEM assisted cermet insert design and tool performance for turning bearing rings
- 1 August 2025
- Published by Springer Nature in Sādhanā
- Vol. 50 (3) , 1-13
Comprehensive analysis of FEM assisted cermet insert design and tool performance for turning bearing rings
- Open Access
A Holistic Perspective on Sustainable Machining of Al6082: Synergistic Effects of Nano-Enhanced Bio-Lubricants
This study investigates the performance of biobased and nano-additive lubricants for the sustainable machining of Al6082 alloy. The experiments were conducted in five different cutting environments: dry cutting, olive oil-based minimum quantity lubrication (MQL), sunflower oil-based MQL, olive oil-based MQL with nano-SiO2 additives, and sunflower oil-based MQL with nano-SiO2 additives. The machining performance was evaluated in terms of key parameters such as surface roughness, cutting forces, tool wear, cutting temperature, and chip morphology. The results show that nano-additive lubricants reduce friction, reduce tool wear, and reduce cutting forces, thus providing lower surface roughness. The nano-SiO2-additive olive oil-based MQL method showed the optimum performance by providing the lowest cutting force and temperature values. It was also determined that nano-additive lubricants contributed to more regular chip formation. The study reveals that the use of biobased nano-lubricants in sustainable machining processes offers environmental and economic advantages. In the future, it is recommended to examine different types and concentrations of nanoparticles, conduct long-term tool wear analyses, and evaluate the effects on other machining methods.
Open AccessA Holistic Perspective on Sustainable Machining of Al6082: Synergistic Effects of Nano-Enhanced Bio-Lubricants
This study investigates the performance of biobased and nano-additive lubricants for the sustainable machining of Al6082 alloy. The experiments were conducted in five different cutting environments: dry cutting, olive oil-based minimum quantity lubrication (MQL), sunflower oil-based MQL, olive oil-based MQL with nano-SiO2 additives, and sunflower oil-based MQL with nano-SiO2 additives. The machining performance was evaluated in terms of key parameters such as surface roughness, cutting forces, tool wear, cutting temperature, and chip morphology. The results show that nano-additive lubricants reduce friction, reduce tool wear, and reduce cutting forces, thus providing lower surface roughness. The nano-SiO2-additive olive oil-based MQL method showed the optimum performance by providing the lowest cutting force and temperature values. It was also determined that nano-additive lubricants contributed to more regular chip formation. The study reveals that the use of biobased nano-lubricants in sustainable machining processes offers environmental and economic advantages. In the future, it is recommended to examine different types and concentrations of nanoparticles, conduct long-term tool wear analyses, and evaluate the effects on other machining methods.
- 31 December 2024
- Published by Elsevier in Measurement
- Vol. 245
A comprehensive review on sustainability in EDM process of additive manufactured materials
- 31 December 2024
- Published by Elsevier in Measurement
- Vol. 245
A comprehensive review on sustainability in EDM process of additive manufactured materials
- Open Access
- 7 June 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 133 (5-6) , 2303-2317
Studies on energy consumption and other important machining characteristics in sustainable turning of EA1N railway axle steel
The present research focuses on comprehensively evaluating energy consumption and other vital machining characteristics during the turning process, aiming to optimize efficiency while minimizing environmental impact. The experimental data is collected through a series of machining tests on EA1N railway axle steel under dry, minimum quantity lubrication (MQL), and cryogenic cooling conditions. Under these cutting conditions, the machinability criteria (energy consumption, tool wear, surface quality, chip morphology) of train wheel axle steel were tried to be improved. As a result, cryogenic cooling at constant cutting speed gave 40% and 53% better results in terms of energy consumption than MQL and dry environment, respectively. When the same situation was examined in terms of tool wear and surface quality, 10–18% and 8–14% gave better results, respectively. In other words, it is worthy to mention that the research findings not only benefit the manufacturing industry by optimizing resource utilization but also align with global efforts to promote environmentally conscious practices in the engineering and transportation sectors.
- 7 June 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 133 (5-6) , 2303-2317
Open AccessStudies on energy consumption and other important machining characteristics in sustainable turning of EA1N railway axle steel
The present research focuses on comprehensively evaluating energy consumption and other vital machining characteristics during the turning process, aiming to optimize efficiency while minimizing environmental impact. The experimental data is collected through a series of machining tests on EA1N railway axle steel under dry, minimum quantity lubrication (MQL), and cryogenic cooling conditions. Under these cutting conditions, the machinability criteria (energy consumption, tool wear, surface quality, chip morphology) of train wheel axle steel were tried to be improved. As a result, cryogenic cooling at constant cutting speed gave 40% and 53% better results in terms of energy consumption than MQL and dry environment, respectively. When the same situation was examined in terms of tool wear and surface quality, 10–18% and 8–14% gave better results, respectively. In other words, it is worthy to mention that the research findings not only benefit the manufacturing industry by optimizing resource utilization but also align with global efforts to promote environmentally conscious practices in the engineering and transportation sectors.
- Open Access
- 6 June 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 133 (5-6) , 2171-2188
Prediction of power consumption and its signals in sustainable turning of PH13-8Mo steel with different machine learning models
Due to extensive distribution and huge demand of energy efficient processes, the energy-saving of machining processes draws more and more attention, and a significant variety of methods have evolved to prognosis or optimise the energy consumption in machining operations. Similarly, the estimation of power consumption-cutting conditions relationships is of great importance for optimizing processing costs and for cleaner machining. Compared to traditional methods, machine learning (ML) approach is one of the effective analysis options to model machinability indicators such as cutting force, tool wear, power consumption and surface quality. In this study, PH13-8Mo stainless steel was machined with coated carbide inserts using primarily Dry, MQL, nano-Graphene + MQL, nano-hBN + MQL, Cryo, Cryo + MQL cutting environments. Power consumption and its signals during milling were measured and different machine learning models were applied to estimate the Pc. To develop the Pc model based on the ML algorithm, 70% of the power consumption data is reserved for training and 30% for testing. In all cutting environments, power consumption increased by an average of 3.14% as feed speed increased. The reduction in Pc compared to the dry cutting was calculated as an average of 2.2%, 3.17%, 2.57%, 4.88% and 5.45% for MQL, nano-Graphen + MQL, nano-hBN + MQL, Cryo, Cryo + MQL, respectively. It is seen that the developed prediction model can reflect the power consumption-parameter relationships at high accuracy.
- 6 June 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 133 (5-6) , 2171-2188
Open AccessPrediction of power consumption and its signals in sustainable turning of PH13-8Mo steel with different machine learning models
Due to extensive distribution and huge demand of energy efficient processes, the energy-saving of machining processes draws more and more attention, and a significant variety of methods have evolved to prognosis or optimise the energy consumption in machining operations. Similarly, the estimation of power consumption-cutting conditions relationships is of great importance for optimizing processing costs and for cleaner machining. Compared to traditional methods, machine learning (ML) approach is one of the effective analysis options to model machinability indicators such as cutting force, tool wear, power consumption and surface quality. In this study, PH13-8Mo stainless steel was machined with coated carbide inserts using primarily Dry, MQL, nano-Graphene + MQL, nano-hBN + MQL, Cryo, Cryo + MQL cutting environments. Power consumption and its signals during milling were measured and different machine learning models were applied to estimate the Pc. To develop the Pc model based on the ML algorithm, 70% of the power consumption data is reserved for training and 30% for testing. In all cutting environments, power consumption increased by an average of 3.14% as feed speed increased. The reduction in Pc compared to the dry cutting was calculated as an average of 2.2%, 3.17%, 2.57%, 4.88% and 5.45% for MQL, nano-Graphen + MQL, nano-hBN + MQL, Cryo, Cryo + MQL, respectively. It is seen that the developed prediction model can reflect the power consumption-parameter relationships at high accuracy.
- Open Access
- 5 June 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (8) , 10287-10326
Analytical Modeling Methods in Machining: A State of the Art on Application, Recent Challenges, and Future Trends
Information technology applications are crucial to the proper utilization of manufacturing equipment in the new industrial age, i.e., Industry 4.0. There are certain fundamental conditions that users must meet to adapt the manufacturing processes to Industry 4.0. For this, as in the past, there is a major need for modeling and simulation tools in this industrial age. In the creation of industry-driven predictive models for machining processes, substantial progress has recently been made. This paper includes a comprehensive review of predictive performance models for machining (particularly analytical models), as well as a list of existing models' strengths and drawbacks. It contains a review of available modeling tools, as well as their usability and/or limits in the monitoring of industrial machining operations. The goal of process models is to forecast principal variables such as stress, strain, force, and temperature. These factors, however, should be connected to performance outcomes, i.e., product quality and manufacturing efficiency, to be valuable to the industry (dimensional accuracy, surface quality, surface integrity, tool life, energy consumption, etc.). Industry adoption of cutting models depends on a model's ability to make this connection and predict the performance of process outputs. Therefore, this review article organizes and summarizes a variety of critical research themes connected to well-established analytical models for machining processes.
- 5 June 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (8) , 10287-10326
Open AccessAnalytical Modeling Methods in Machining: A State of the Art on Application, Recent Challenges, and Future Trends
Information technology applications are crucial to the proper utilization of manufacturing equipment in the new industrial age, i.e., Industry 4.0. There are certain fundamental conditions that users must meet to adapt the manufacturing processes to Industry 4.0. For this, as in the past, there is a major need for modeling and simulation tools in this industrial age. In the creation of industry-driven predictive models for machining processes, substantial progress has recently been made. This paper includes a comprehensive review of predictive performance models for machining (particularly analytical models), as well as a list of existing models' strengths and drawbacks. It contains a review of available modeling tools, as well as their usability and/or limits in the monitoring of industrial machining operations. The goal of process models is to forecast principal variables such as stress, strain, force, and temperature. These factors, however, should be connected to performance outcomes, i.e., product quality and manufacturing efficiency, to be valuable to the industry (dimensional accuracy, surface quality, surface integrity, tool life, energy consumption, etc.). Industry adoption of cutting models depends on a model's ability to make this connection and predict the performance of process outputs. Therefore, this review article organizes and summarizes a variety of critical research themes connected to well-established analytical models for machining processes.