Jean-Philippe Condomines
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jean-Philippe Condomines has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jean-Marc Moschetta
ISAE-SUPAERO
3 shared publications - Romain Jan
ISAE-SUPAERO
3 shared publications - Emmanuel Lochin
Fdration ENAC ISAE-SUPAERO ONERA, Universit de Toulouse, Toulouse, France
2 shared publications - Murat Bronz
École Nationale de l’Aviation Civile
2 shared publications - Torbjørn Cunis
University of Stuttgart
2 shared publications Clémence Allietta
Fdration ENAC ISAE-SUPAERO ONERA, Universit de Toulouse, Toulouse, France
1 shared publication
Latest Publications
- 1 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Développement d’un estimateur d’état non linéaire embarqué pour le pilotage-guidage robuste d’un micro-drone en milieu complexe
Le travail effectué au cours de cette thèse tente d’apporter une solution algorithmique à la problématique de l’estimation de l’état d’un mini-drone en vol qui soit compatible avec les exigences d’embarquabilité inhérentes au système. Il a été orienté vers les méthodes d’estimation non linéaire à base de modèles. Les algorithmes d’estimation, d’état ou de paramètres, et de contrôle apparaissent primordiaux, lorsque la technologie des capteurs et des actionneurs, pour des raisons de coût et d’encombrement essentiellement, ne permet pas de disposer de capacités illimitées. Ceci est particulièrement vrai dans le cas des micro- et des mini-drones. L’estimation permet de fusionner en temps réel les informations imparfaites provenant des différents capteurs et de fournir une estimation, par exemple de l’état du drone (orientation, vitesse, position) au calculateur embarqué où sont implémentés les algorithmes de commande de l’engin. Ce contrôle de l’appareil doit garantir sa stabilité en boucle fermée quelque soit l’ordre de consigne fourni directement par l’opérateur ou par tout système automatique de gestion du vol et assurer que celle-ci soit correctement recopiée. Estimation et commande participent donc grandement au succès de toute mission. Une dimension extrêmement importante qui a conditionné les travaux entrepris tout au long de cette thèse concerne la capacité d’emport des mini-drones que nous considérons. En effet, celle-ci, relativement limitée, et couplée à la volonté de ne pas grever les budgets de développement de tout mini-drone, autorise uniquement l’intégration de matériels dits bas-coûts. Malgré les progrès significatifs de la miniaturisation et l’augmentation continuelle des capacités de calcul embarqué (loi de Moore), les mini-drones d’intérêt considérés ici n’embarquent donc que des capteurs aux performances limitées dans un contexte où cette catégorie d’engins autonomes est amenée à être de plus en plus fréquemment exploitée pour remplir des missions elles-mêmes toujours plus nombreuses. Celles-ci requièrent notamment que de tels drones puissent de manière sûre s’insérer et partager l’espace aérien civil moyennant le passage d’une certification de leur vol au même titre que pour les avions de transport des différentes compagnies aériennes. Dès lors, face à cet enjeu de sécurisation des vols de mini-drones, la consolidation de la connaissance de l’état de l’aéronef par des techniques d’estimation devient un tâche essentielle pour en assurer le contrôle, y compris en situations dégradées (pannes capteurs, perte occasionnelle de signaux, bruit et perturbations environnantes, imperfections des moyens de mesure, etc). Tenter de répondre à cet enjeu conduit naturellement le chercheur à s’attaquer à des problèmes relativement nouveaux, en tout cas pas forcément aussi proches de ceux qui se posent dans le secteur de l’aéronautique civile ou militaire, où le système avionique est sans commune mesure avec celui sur lequel nous avons travaillé dans cette thèse. Ce travail à tout d’abord consisté à définir une modélisation dynamique descriptive du vol des mini-drones étudiés, suffisamment générique pour être appliquée à différents types de minidrones (voilure fixe, multirotor, etc). Par la suite, deux algorithmes d’estimation originaux, dénommés IUKF et -IUKF, exploitant ce modèle, ont été développés avant d’être testés en simulation puis sur données réelles pour la version -IUKF. Ces deux méthodes transposent le cadre générique des observateurs invariants au cas de l’estimation non linéaire de l’état d’un système dynamique par une technique de type Unscented Kalman Filter (UKF) qui appartient à la classe plus générale des algorithmes de filtrage non linéaire de type Sigma Point (SP). La solution proposée garantit un plus grand domaine de convergence de l’estimé que les techniques plus traditionnelles.
- 1 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Développement d’un estimateur d’état non linéaire embarqué pour le pilotage-guidage robuste d’un micro-drone en milieu complexe
Le travail effectué au cours de cette thèse tente d’apporter une solution algorithmique à la problématique de l’estimation de l’état d’un mini-drone en vol qui soit compatible avec les exigences d’embarquabilité inhérentes au système. Il a été orienté vers les méthodes d’estimation non linéaire à base de modèles. Les algorithmes d’estimation, d’état ou de paramètres, et de contrôle apparaissent primordiaux, lorsque la technologie des capteurs et des actionneurs, pour des raisons de coût et d’encombrement essentiellement, ne permet pas de disposer de capacités illimitées. Ceci est particulièrement vrai dans le cas des micro- et des mini-drones. L’estimation permet de fusionner en temps réel les informations imparfaites provenant des différents capteurs et de fournir une estimation, par exemple de l’état du drone (orientation, vitesse, position) au calculateur embarqué où sont implémentés les algorithmes de commande de l’engin. Ce contrôle de l’appareil doit garantir sa stabilité en boucle fermée quelque soit l’ordre de consigne fourni directement par l’opérateur ou par tout système automatique de gestion du vol et assurer que celle-ci soit correctement recopiée. Estimation et commande participent donc grandement au succès de toute mission. Une dimension extrêmement importante qui a conditionné les travaux entrepris tout au long de cette thèse concerne la capacité d’emport des mini-drones que nous considérons. En effet, celle-ci, relativement limitée, et couplée à la volonté de ne pas grever les budgets de développement de tout mini-drone, autorise uniquement l’intégration de matériels dits bas-coûts. Malgré les progrès significatifs de la miniaturisation et l’augmentation continuelle des capacités de calcul embarqué (loi de Moore), les mini-drones d’intérêt considérés ici n’embarquent donc que des capteurs aux performances limitées dans un contexte où cette catégorie d’engins autonomes est amenée à être de plus en plus fréquemment exploitée pour remplir des missions elles-mêmes toujours plus nombreuses. Celles-ci requièrent notamment que de tels drones puissent de manière sûre s’insérer et partager l’espace aérien civil moyennant le passage d’une certification de leur vol au même titre que pour les avions de transport des différentes compagnies aériennes. Dès lors, face à cet enjeu de sécurisation des vols de mini-drones, la consolidation de la connaissance de l’état de l’aéronef par des techniques d’estimation devient un tâche essentielle pour en assurer le contrôle, y compris en situations dégradées (pannes capteurs, perte occasionnelle de signaux, bruit et perturbations environnantes, imperfections des moyens de mesure, etc). Tenter de répondre à cet enjeu conduit naturellement le chercheur à s’attaquer à des problèmes relativement nouveaux, en tout cas pas forcément aussi proches de ceux qui se posent dans le secteur de l’aéronautique civile ou militaire, où le système avionique est sans commune mesure avec celui sur lequel nous avons travaillé dans cette thèse. Ce travail à tout d’abord consisté à définir une modélisation dynamique descriptive du vol des mini-drones étudiés, suffisamment générique pour être appliquée à différents types de minidrones (voilure fixe, multirotor, etc). Par la suite, deux algorithmes d’estimation originaux, dénommés IUKF et -IUKF, exploitant ce modèle, ont été développés avant d’être testés en simulation puis sur données réelles pour la version -IUKF. Ces deux méthodes transposent le cadre générique des observateurs invariants au cas de l’estimation non linéaire de l’état d’un système dynamique par une technique de type Unscented Kalman Filter (UKF) qui appartient à la classe plus générale des algorithmes de filtrage non linéaire de type Sigma Point (SP). La solution proposée garantit un plus grand domaine de convergence de l’estimé que les techniques plus traditionnelles.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 497-516
Experimental Evaluation of the ASWING Aeroelastic Framework: Structure Model
This article presents the experimental validation of ASWING, an aeroelastic software for the preliminary design of highly flexible aircraft. This paper focuses on the structural model. The first section briefly recalls the model and its features. Next, the paper provides the numerical scheme’s convergence and runtime for static aeroelastic analyses. Experimental validations are then introduced, including cases involving large tip deflections in helicopter blades and moderate- to low-aspect-ratio wings, chosen to highlight both stiffness coupling and aspect-ratio limitations. The modal responses of each case are compared with experimental data from the literature. The article also assesses the impact of concentrated masses, such as nacelles or tanks, analyzing the effects of their position along the chord and span on a wing’s modal response. Validation cases related to joined wings and the influence of joints on structural response are also presented. Finally, the paper discusses ASWING’s capacity to predict buckling and notes that it shows good agreement with experiments for all test cases. Discrepancies are extensively discussed, and predictions are delivered in less than 0.1 s for deflection and 2.0 s for modal responses on modern laptops.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 497-516
Experimental Evaluation of the ASWING Aeroelastic Framework: Structure Model
This article presents the experimental validation of ASWING, an aeroelastic software for the preliminary design of highly flexible aircraft. This paper focuses on the structural model. The first section briefly recalls the model and its features. Next, the paper provides the numerical scheme’s convergence and runtime for static aeroelastic analyses. Experimental validations are then introduced, including cases involving large tip deflections in helicopter blades and moderate- to low-aspect-ratio wings, chosen to highlight both stiffness coupling and aspect-ratio limitations. The modal responses of each case are compared with experimental data from the literature. The article also assesses the impact of concentrated masses, such as nacelles or tanks, analyzing the effects of their position along the chord and span on a wing’s modal response. Validation cases related to joined wings and the influence of joints on structural response are also presented. Finally, the paper discusses ASWING’s capacity to predict buckling and notes that it shows good agreement with experiments for all test cases. Discrepancies are extensively discussed, and predictions are delivered in less than 0.1 s for deflection and 2.0 s for modal responses on modern laptops.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 480-496
Experimental Evaluation of the ASWING Aeroelastic Framework: Aerodynamics and Propeller Models
This article presents the experimental evaluation and modification of the aerodynamic features of ASWING, a software developed at MIT and mostly used for preliminary design and flight dynamic analysis of highly flexible aircraft. It focuses on the aerodynamic and propeller models and their interactions, investigating a large part of the steady and unsteady features. The paper starts with a brief literature review that justifies the choice of ASWING over other solutions and explains its need for validation. The methodology and various code modifications to improve prediction performance are then presented. The paper follows with a series of test cases to illustrate the capabilities of the tool and the improvements made by the modifications. These include the prediction of linear lift, stall, and drag; aerodynamic control surface effects; close interactions between lifting surfaces (fuselage carryover, wake interference, and downstream circulation influence); unsteady aerodynamics; and propeller jets interacting with downstream lifting surfaces. The paper concludes that ASWING is an accurate and efficient tool for predicting various macroscopic aerodynamic phenomena, making it an interesting framework to be coupled with multidisciplinary analysis and optimization software for aircraft predesign adapted to modern unconventional layouts. However, ASWING shows weaknesses in specific features with poor prediction performance; among them are secondary loads produced by the deflected flap (e.g., yawing moments induced by deflected ailerons); wing–body interactions (fuselage lift carry-over is not captured); propeller thrust in highly off-axis conditions (VTOL configurations); and propeller jet azimuthal speed predictions (swirl).
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 480-496
Experimental Evaluation of the ASWING Aeroelastic Framework: Aerodynamics and Propeller Models
This article presents the experimental evaluation and modification of the aerodynamic features of ASWING, a software developed at MIT and mostly used for preliminary design and flight dynamic analysis of highly flexible aircraft. It focuses on the aerodynamic and propeller models and their interactions, investigating a large part of the steady and unsteady features. The paper starts with a brief literature review that justifies the choice of ASWING over other solutions and explains its need for validation. The methodology and various code modifications to improve prediction performance are then presented. The paper follows with a series of test cases to illustrate the capabilities of the tool and the improvements made by the modifications. These include the prediction of linear lift, stall, and drag; aerodynamic control surface effects; close interactions between lifting surfaces (fuselage carryover, wake interference, and downstream circulation influence); unsteady aerodynamics; and propeller jets interacting with downstream lifting surfaces. The paper concludes that ASWING is an accurate and efficient tool for predicting various macroscopic aerodynamic phenomena, making it an interesting framework to be coupled with multidisciplinary analysis and optimization software for aircraft predesign adapted to modern unconventional layouts. However, ASWING shows weaknesses in specific features with poor prediction performance; among them are secondary loads produced by the deflected flap (e.g., yawing moments induced by deflected ailerons); wing–body interactions (fuselage lift carry-over is not captured); propeller thrust in highly off-axis conditions (VTOL configurations); and propeller jet azimuthal speed predictions (swirl).
- 20 June 2025
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 14 (05) , 1-17
New Dynamic Soaring Formulation for Assessing the Effects of Flexibility on Mini UAV Endurance Performance
This study extends dynamic soaring analysis methods by incorporating Unmanned Aerial Vehicle (UAV) flexibility effects to assess performance. Using the ASWING framework validated against experimental data, up to seven levels of conservative constraints are added to the traditional 6-degrees-of-freedom point mass model, enhancing flight dynamic modeling fidelity. The impact of each constraint on the soaring performance is analyzed. A comparison between rigid and flexible RC gliders reveals that flexibility, while allowing significant structural deflections, degrades performance due to earlier stall, reduced aerodynamic efficiency, and reduced control effectiveness at high speeds. Unsteady aerodynamics and transient structural response are shown to have negligible effects. A novel travel strategy is introduced, significantly improving the performance of flexible UAVs.
- 20 June 2025
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 14 (05) , 1-17
New Dynamic Soaring Formulation for Assessing the Effects of Flexibility on Mini UAV Endurance Performance
This study extends dynamic soaring analysis methods by incorporating Unmanned Aerial Vehicle (UAV) flexibility effects to assess performance. Using the ASWING framework validated against experimental data, up to seven levels of conservative constraints are added to the traditional 6-degrees-of-freedom point mass model, enhancing flight dynamic modeling fidelity. The impact of each constraint on the soaring performance is analyzed. A comparison between rigid and flexible RC gliders reveals that flexibility, while allowing significant structural deflections, degrades performance due to earlier stall, reduced aerodynamic efficiency, and reduced control effectiveness at high speeds. Unsteady aerodynamics and transient structural response are shown to have negligible effects. A novel travel strategy is introduced, significantly improving the performance of flexible UAVs.
- Open Access
- 5 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 128509-128518
HLoOP—Hyperbolic 2-Space Local Outlier Probabilities
Hyperbolic geometry has recently garnered considerable attention in machine learning due to its capacity to embed hierarchical graph structures with low distortions for further downstream processing. This paper introduces a simple framework to detect local outliers for datasets grounded in hyperbolic 2- space referred to as Hyperbolic Local Outlier Probability (HLoOP). Within a Euclidean space, well-known techniques for local outlier detection are based on the Local Outlier Factor (LOF) and its variant, the LoOP (Local Outlier Probability), which incorporates probabilistic concepts to model the outlier level of a data vector. The developed HLoOP combines the idea of finding nearest neighbors, density-based outlier scoring with a probabilistic, statistically oriented approach. Therefore, the method consists in computing the Riemmanian distance of a data point to its nearest neighbors following a Gaussian probability density function expressed in a hyperbolic space. This is achieved by defining a Gaussian cumulative distribution in this space. The HLoOP algorithm is tested on the WordNet dataset yielding promising results. The code and data will be made available on request for reproducibility.
- 5 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 128509-128518
Open AccessHLoOP—Hyperbolic 2-Space Local Outlier Probabilities
Hyperbolic geometry has recently garnered considerable attention in machine learning due to its capacity to embed hierarchical graph structures with low distortions for further downstream processing. This paper introduces a simple framework to detect local outliers for datasets grounded in hyperbolic 2- space referred to as Hyperbolic Local Outlier Probability (HLoOP). Within a Euclidean space, well-known techniques for local outlier detection are based on the Local Outlier Factor (LOF) and its variant, the LoOP (Local Outlier Probability), which incorporates probabilistic concepts to model the outlier level of a data vector. The developed HLoOP combines the idea of finding nearest neighbors, density-based outlier scoring with a probabilistic, statistically oriented approach. Therefore, the method consists in computing the Riemmanian distance of a data point to its nearest neighbors following a Gaussian probability density function expressed in a hyperbolic space. This is achieved by defining a Gaussian cumulative distribution in this space. The HLoOP algorithm is tested on the WordNet dataset yielding promising results. The code and data will be made available on request for reproducibility.
- Open Access
- 21 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 617-625
A Hybrid Polynomial Stall Model for the Longitudinal Dynamics of a UAV
Modeling the longitudinal dynamics of a fixed-wing unmanned aerial vehicle (UAV) at high angles of attack is not an easy task. Indeed, when the airplane approaches stall, non-linear effects appear, including transient behaviors and an aerodynamic hysteresis. Although some models are present in the literature to address these aspects, they are usually aerodynamics-based and often too complex for analysis and control applications. Therefore, this paper presents a new hybrid polynomial formulation for the modeling of the aerodynamic coefficients. In addition, a Linearly Constrained Least Squares (LCLS) process guaranteeing continuity at the mode transitions is proposed for the identification of the model. The Hybrid Polynomial Stall Model (HPSM) is finally identified on experimental wind tunnel data, showcasing its ability to accurately predict a UAV’s dynamics.
- 21 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 617-625
Open AccessA Hybrid Polynomial Stall Model for the Longitudinal Dynamics of a UAV
Modeling the longitudinal dynamics of a fixed-wing unmanned aerial vehicle (UAV) at high angles of attack is not an easy task. Indeed, when the airplane approaches stall, non-linear effects appear, including transient behaviors and an aerodynamic hysteresis. Although some models are present in the literature to address these aspects, they are usually aerodynamics-based and often too complex for analysis and control applications. Therefore, this paper presents a new hybrid polynomial formulation for the modeling of the aerodynamic coefficients. In addition, a Linearly Constrained Least Squares (LCLS) process guaranteeing continuity at the mode transitions is proposed for the identification of the model. The Hybrid Polynomial Stall Model (HPSM) is finally identified on experimental wind tunnel data, showcasing its ability to accurately predict a UAV’s dynamics.
- Open Access
A Multifractal Analysis and Machine Learning Based Intrusion Detection System with an Application in a UAS/RADAR System
The rapid development of Internet of Things (IoT) technology, together with mobile network technology, has created a never-before-seen world of interconnection, evoking research on how to make it vaster, faster, and safer. To support the ongoing fight against the malicious misuse of networks, in this paper we propose a novel algorithm called AMDES (unmanned aerial system multifractal analysis intrusion detection system) for spoofing attack detection. This novel algorithm is based on both wavelet leader multifractal analysis (WLM) and machine learning (ML) principles. In earlier research on unmanned aerial systems (UAS), intrusion detection systems (IDS) based on multifractal (MF) spectral analysis have been used to provide accurate MF spectrum estimations of network traffic. Such an estimation is then used to detect and characterize flooding anomalies that can be observed in an unmanned aerial vehicle (UAV) network. However, the previous contributions have lacked the consideration of other types of network intrusions commonly observed in UAS networks, such as the man in the middle attack (MITM). In this work, this promising methodology has been accommodated to detect a spoofing attack within a UAS. This methodology highlights a robust approach in terms of false positive performance in detecting intrusions in a UAS location reporting system.
Open AccessA Multifractal Analysis and Machine Learning Based Intrusion Detection System with an Application in a UAS/RADAR System
The rapid development of Internet of Things (IoT) technology, together with mobile network technology, has created a never-before-seen world of interconnection, evoking research on how to make it vaster, faster, and safer. To support the ongoing fight against the malicious misuse of networks, in this paper we propose a novel algorithm called AMDES (unmanned aerial system multifractal analysis intrusion detection system) for spoofing attack detection. This novel algorithm is based on both wavelet leader multifractal analysis (WLM) and machine learning (ML) principles. In earlier research on unmanned aerial systems (UAS), intrusion detection systems (IDS) based on multifractal (MF) spectral analysis have been used to provide accurate MF spectrum estimations of network traffic. Such an estimation is then used to detect and characterize flooding anomalies that can be observed in an unmanned aerial vehicle (UAV) network. However, the previous contributions have lacked the consideration of other types of network intrusions commonly observed in UAS networks, such as the man in the middle attack (MITM). In this work, this promising methodology has been accommodated to detect a spoofing attack within a UAS. This methodology highlights a robust approach in terms of false positive performance in detecting intrusions in a UAS location reporting system.
- 1 April 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Guidance, Control, and Dynamics
- Vol. 42 (4) , 949-957
Piecewise Polynomial Modeling for Control and Analysis of Aircraft Dynamics Beyond Stall
- 1 April 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Guidance, Control, and Dynamics
- Vol. 42 (4) , 949-957
Piecewise Polynomial Modeling for Control and Analysis of Aircraft Dynamics Beyond Stall
- Open Access
Analysis of the Aerodynamic Coefficients for the Evolvable Demonstrator for Upset Recovery Approaches with Evaluation in the Wind-tunnel
While in-flight loss of control has remained a severe threat to aviation, few of the upset recovery approaches designed by aeronautical research has been demonstrated in flight tests. Enabled by the ongoing success of micro air vehicles, we discuss the concept of an aerial experimental platform for upset recovery, EDURA (Evolvable Demonstrator for Upset Recovery Approaches), allowing cheap and flexible flight demonstrations. The aerodynamic coefficients of the vehicle presented here are numerically computed and extended to a full-envelope aerodynamic model using piece-wise polynomials in pre-and post-stall. Eventually, the aerodynamics are verified with wind-tunnel force measurements for a 3D-printed mock-up.
Open AccessAnalysis of the Aerodynamic Coefficients for the Evolvable Demonstrator for Upset Recovery Approaches with Evaluation in the Wind-tunnel
While in-flight loss of control has remained a severe threat to aviation, few of the upset recovery approaches designed by aeronautical research has been demonstrated in flight tests. Enabled by the ongoing success of micro air vehicles, we discuss the concept of an aerial experimental platform for upset recovery, EDURA (Evolvable Demonstrator for Upset Recovery Approaches), allowing cheap and flexible flight demonstrations. The aerodynamic coefficients of the vehicle presented here are numerically computed and extended to a full-envelope aerodynamic model using piece-wise polynomials in pre-and post-stall. Eventually, the aerodynamics are verified with wind-tunnel force measurements for a 3D-printed mock-up.
- 1 January 2018
- Published by ISTE Group in Automatique
- Vol. 1 (1)
Une étude sur l’estimation non linéaire basée sur la théorie des observateurs invariants
- 1 January 2018
- Published by ISTE Group in Automatique
- Vol. 1 (1)
Une étude sur l’estimation non linéaire basée sur la théorie des observateurs invariants