Romain Jan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Romain Jan has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Jean-Marc Moschetta
ISAE-SUPAERO
3 shared publications - Jean-Philippe Condomines
ENAC
3 shared publications Jean-Marc Moschetta
ISAE-SUPAERO
2 shared publicationsJean-Philippe Condomines
ENAC
2 shared publicationsEmmanuel Benard
ISAE-SUPAERO
1 shared publication- Emmanuel Benard
Fédération ENAC ISAE-SUPAERO ONERA, Université de Toulouse, 31042 Toulouse, France
1 shared publication
Latest Publications
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Energy harvesting on flexible UAVs
Récupération d'énergie sur drone à voilure souple: Le marché des drones à voilure fixe est en plein essor depuis les 2 dernières décennies. Pour rester compétitif un aéronef se doit d’être endurant et proposer une charge utile la plus importante possible. A la lumière de la littérature scientifique, l’ensemble des techniques d’optimisation multi-disciplinaires convergent vers des configurations de fort allongement et flexibles. Il est possible d’étendre encore l’endurance d’un drone en exploitant les perturbations atmosphériques rencontrées lors du vol. Cette thèse vise à montrer si la flexibilité d’une voilure peut améliorer les performances d’extraction d’énergie. Il existe 3 grandes stratégies, le vol d’ascendance, de gradient et de turbulence qui soulèvent des besoins numériques distincts. A la lumière de ces derniers, un espace de travail numérique a été retenu et a fait l’objet d’une validation sur le plan expérimental renforçant les éventuelles conclusions liées au sujet. A l’issue de ces travaux, l’impact de la flexibilité sur les performances, de vol d’ascendance, de gradient et turbulence ont été étudiées. Il semble que la souplesse de la voilure ne soit bénéfique qu’au vol de turbulence mais la géométrie optimisée pour cette stratégie tend à contracter significativement l’enveloppe de vol. Enfin pour le vol de gradient, les résultats préliminaires semblent montrer que la souplesse dégradent les performances.
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Energy harvesting on flexible UAVs
Récupération d'énergie sur drone à voilure souple: Le marché des drones à voilure fixe est en plein essor depuis les 2 dernières décennies. Pour rester compétitif un aéronef se doit d’être endurant et proposer une charge utile la plus importante possible. A la lumière de la littérature scientifique, l’ensemble des techniques d’optimisation multi-disciplinaires convergent vers des configurations de fort allongement et flexibles. Il est possible d’étendre encore l’endurance d’un drone en exploitant les perturbations atmosphériques rencontrées lors du vol. Cette thèse vise à montrer si la flexibilité d’une voilure peut améliorer les performances d’extraction d’énergie. Il existe 3 grandes stratégies, le vol d’ascendance, de gradient et de turbulence qui soulèvent des besoins numériques distincts. A la lumière de ces derniers, un espace de travail numérique a été retenu et a fait l’objet d’une validation sur le plan expérimental renforçant les éventuelles conclusions liées au sujet. A l’issue de ces travaux, l’impact de la flexibilité sur les performances, de vol d’ascendance, de gradient et turbulence ont été étudiées. Il semble que la souplesse de la voilure ne soit bénéfique qu’au vol de turbulence mais la géométrie optimisée pour cette stratégie tend à contracter significativement l’enveloppe de vol. Enfin pour le vol de gradient, les résultats préliminaires semblent montrer que la souplesse dégradent les performances.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 497-516
Experimental Evaluation of the ASWING Aeroelastic Framework: Structure Model
This article presents the experimental validation of ASWING, an aeroelastic software for the preliminary design of highly flexible aircraft. This paper focuses on the structural model. The first section briefly recalls the model and its features. Next, the paper provides the numerical scheme’s convergence and runtime for static aeroelastic analyses. Experimental validations are then introduced, including cases involving large tip deflections in helicopter blades and moderate- to low-aspect-ratio wings, chosen to highlight both stiffness coupling and aspect-ratio limitations. The modal responses of each case are compared with experimental data from the literature. The article also assesses the impact of concentrated masses, such as nacelles or tanks, analyzing the effects of their position along the chord and span on a wing’s modal response. Validation cases related to joined wings and the influence of joints on structural response are also presented. Finally, the paper discusses ASWING’s capacity to predict buckling and notes that it shows good agreement with experiments for all test cases. Discrepancies are extensively discussed, and predictions are delivered in less than 0.1 s for deflection and 2.0 s for modal responses on modern laptops.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 497-516
Experimental Evaluation of the ASWING Aeroelastic Framework: Structure Model
This article presents the experimental validation of ASWING, an aeroelastic software for the preliminary design of highly flexible aircraft. This paper focuses on the structural model. The first section briefly recalls the model and its features. Next, the paper provides the numerical scheme’s convergence and runtime for static aeroelastic analyses. Experimental validations are then introduced, including cases involving large tip deflections in helicopter blades and moderate- to low-aspect-ratio wings, chosen to highlight both stiffness coupling and aspect-ratio limitations. The modal responses of each case are compared with experimental data from the literature. The article also assesses the impact of concentrated masses, such as nacelles or tanks, analyzing the effects of their position along the chord and span on a wing’s modal response. Validation cases related to joined wings and the influence of joints on structural response are also presented. Finally, the paper discusses ASWING’s capacity to predict buckling and notes that it shows good agreement with experiments for all test cases. Discrepancies are extensively discussed, and predictions are delivered in less than 0.1 s for deflection and 2.0 s for modal responses on modern laptops.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 480-496
Experimental Evaluation of the ASWING Aeroelastic Framework: Aerodynamics and Propeller Models
This article presents the experimental evaluation and modification of the aerodynamic features of ASWING, a software developed at MIT and mostly used for preliminary design and flight dynamic analysis of highly flexible aircraft. It focuses on the aerodynamic and propeller models and their interactions, investigating a large part of the steady and unsteady features. The paper starts with a brief literature review that justifies the choice of ASWING over other solutions and explains its need for validation. The methodology and various code modifications to improve prediction performance are then presented. The paper follows with a series of test cases to illustrate the capabilities of the tool and the improvements made by the modifications. These include the prediction of linear lift, stall, and drag; aerodynamic control surface effects; close interactions between lifting surfaces (fuselage carryover, wake interference, and downstream circulation influence); unsteady aerodynamics; and propeller jets interacting with downstream lifting surfaces. The paper concludes that ASWING is an accurate and efficient tool for predicting various macroscopic aerodynamic phenomena, making it an interesting framework to be coupled with multidisciplinary analysis and optimization software for aircraft predesign adapted to modern unconventional layouts. However, ASWING shows weaknesses in specific features with poor prediction performance; among them are secondary loads produced by the deflected flap (e.g., yawing moments induced by deflected ailerons); wing–body interactions (fuselage lift carry-over is not captured); propeller thrust in highly off-axis conditions (VTOL configurations); and propeller jet azimuthal speed predictions (swirl).
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 480-496
Experimental Evaluation of the ASWING Aeroelastic Framework: Aerodynamics and Propeller Models
This article presents the experimental evaluation and modification of the aerodynamic features of ASWING, a software developed at MIT and mostly used for preliminary design and flight dynamic analysis of highly flexible aircraft. It focuses on the aerodynamic and propeller models and their interactions, investigating a large part of the steady and unsteady features. The paper starts with a brief literature review that justifies the choice of ASWING over other solutions and explains its need for validation. The methodology and various code modifications to improve prediction performance are then presented. The paper follows with a series of test cases to illustrate the capabilities of the tool and the improvements made by the modifications. These include the prediction of linear lift, stall, and drag; aerodynamic control surface effects; close interactions between lifting surfaces (fuselage carryover, wake interference, and downstream circulation influence); unsteady aerodynamics; and propeller jets interacting with downstream lifting surfaces. The paper concludes that ASWING is an accurate and efficient tool for predicting various macroscopic aerodynamic phenomena, making it an interesting framework to be coupled with multidisciplinary analysis and optimization software for aircraft predesign adapted to modern unconventional layouts. However, ASWING shows weaknesses in specific features with poor prediction performance; among them are secondary loads produced by the deflected flap (e.g., yawing moments induced by deflected ailerons); wing–body interactions (fuselage lift carry-over is not captured); propeller thrust in highly off-axis conditions (VTOL configurations); and propeller jet azimuthal speed predictions (swirl).
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 517-535
Experimental Evaluation of the ASWING Aeroelastic Framework: Aeroelasticity Model
This paper presents the experimental evaluation and subsequent modification of the aeroelastic capabilities of ASWING, a software developed at MIT. Experimental data from the literature are compiled to assess ASWING’s ability to accurately predict deflections and twists under steady flow conditions, as well as their impact on the effectiveness of aerodynamic control surfaces. Based on this analysis, modifications to the code are proposed to improve the prediction of flap and aileron rolling performance. The paper then explores predictions related to torsional and flutter divergence, highlighting the influence of various parameters, such as angle of attack and nacelle position. Limit-cycle oscillations are also examined. Further discussions address tailerons and transonic flutter. A subsequent section focuses on flared folding wingtips, evaluating their effects on gust alleviation, rolling performance, and flutter onset, along with ASWING’s capacity to model these phenomena. ASWING proves to be a well-suited predesign analysis tool for conceptual aircraft architectures, including boxed, joined, and strut-braced wings with or without flared folding wingtips.
- 1 March 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 63 (2) , 517-535
Experimental Evaluation of the ASWING Aeroelastic Framework: Aeroelasticity Model
This paper presents the experimental evaluation and subsequent modification of the aeroelastic capabilities of ASWING, a software developed at MIT. Experimental data from the literature are compiled to assess ASWING’s ability to accurately predict deflections and twists under steady flow conditions, as well as their impact on the effectiveness of aerodynamic control surfaces. Based on this analysis, modifications to the code are proposed to improve the prediction of flap and aileron rolling performance. The paper then explores predictions related to torsional and flutter divergence, highlighting the influence of various parameters, such as angle of attack and nacelle position. Limit-cycle oscillations are also examined. Further discussions address tailerons and transonic flutter. A subsequent section focuses on flared folding wingtips, evaluating their effects on gust alleviation, rolling performance, and flutter onset, along with ASWING’s capacity to model these phenomena. ASWING proves to be a well-suited predesign analysis tool for conceptual aircraft architectures, including boxed, joined, and strut-braced wings with or without flared folding wingtips.
- 20 June 2025
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 14 (05) , 1-17
New Dynamic Soaring Formulation for Assessing the Effects of Flexibility on Mini UAV Endurance Performance
This study extends dynamic soaring analysis methods by incorporating Unmanned Aerial Vehicle (UAV) flexibility effects to assess performance. Using the ASWING framework validated against experimental data, up to seven levels of conservative constraints are added to the traditional 6-degrees-of-freedom point mass model, enhancing flight dynamic modeling fidelity. The impact of each constraint on the soaring performance is analyzed. A comparison between rigid and flexible RC gliders reveals that flexibility, while allowing significant structural deflections, degrades performance due to earlier stall, reduced aerodynamic efficiency, and reduced control effectiveness at high speeds. Unsteady aerodynamics and transient structural response are shown to have negligible effects. A novel travel strategy is introduced, significantly improving the performance of flexible UAVs.
- 20 June 2025
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 14 (05) , 1-17
New Dynamic Soaring Formulation for Assessing the Effects of Flexibility on Mini UAV Endurance Performance
This study extends dynamic soaring analysis methods by incorporating Unmanned Aerial Vehicle (UAV) flexibility effects to assess performance. Using the ASWING framework validated against experimental data, up to seven levels of conservative constraints are added to the traditional 6-degrees-of-freedom point mass model, enhancing flight dynamic modeling fidelity. The impact of each constraint on the soaring performance is analyzed. A comparison between rigid and flexible RC gliders reveals that flexibility, while allowing significant structural deflections, degrades performance due to earlier stall, reduced aerodynamic efficiency, and reduced control effectiveness at high speeds. Unsteady aerodynamics and transient structural response are shown to have negligible effects. A novel travel strategy is introduced, significantly improving the performance of flexible UAVs.
- Open Access
- 9 June 2025
- Published by SAGE Publications in International Journal of Micro Air Vehicles
- Vol. 17
Mini-UAV structure optimization for efficient thermal soaring
This paper investigates the impact of structural flexibility on the thermal soaring performance of a mini-UAV wing. Three optimization problems are formulated to identify the optimal set of structural parameters that maximize energy extraction in both steady and unsteady soaring scenarios. The ASWING aeroelastic simulation tool is first validated experimentally and then employed to solve these optimization problems. Results suggest that increased structural flexibility yields significant benefits only in unsteady soaring (dolphin-kick strategy), but not in steady thermal soaring. For the latter, the apparent performance gains from structural optimization stem more from an effective change in the rigid geometry than from actual aeroelastic advantages. Furthermore, it is shown that active pitch control can yield equal or superior benefits compared to passive structural adaptations. These findings highlight the limitations of flexible wing designs for general-purpose soaring UAVs and suggest that robust aerodynamic geometry coupled with smart control may be a more practical design direction.
- 9 June 2025
- Published by SAGE Publications in International Journal of Micro Air Vehicles
- Vol. 17
Open AccessMini-UAV structure optimization for efficient thermal soaring
This paper investigates the impact of structural flexibility on the thermal soaring performance of a mini-UAV wing. Three optimization problems are formulated to identify the optimal set of structural parameters that maximize energy extraction in both steady and unsteady soaring scenarios. The ASWING aeroelastic simulation tool is first validated experimentally and then employed to solve these optimization problems. Results suggest that increased structural flexibility yields significant benefits only in unsteady soaring (dolphin-kick strategy), but not in steady thermal soaring. For the latter, the apparent performance gains from structural optimization stem more from an effective change in the rigid geometry than from actual aeroelastic advantages. Furthermore, it is shown that active pitch control can yield equal or superior benefits compared to passive structural adaptations. These findings highlight the limitations of flexible wing designs for general-purpose soaring UAVs and suggest that robust aerodynamic geometry coupled with smart control may be a more practical design direction.