Veloorillom Madhavan Sreehari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Veloorillom Madhavan Sreehari has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
D.K. Maiti
4 shared publications- S. Vignesh
School of Mechanical Engineering, SASTRA Deemed University, Thanjavur, India
4 shared publications D. Muniraj
School of Mechanical Engineering, SASTRA Deemed University, Thanjavur, India
3 shared publications- Balaraman Panneerselvam
Assistant Professor, School of Mechanical Engineering, SASTRA Deemed to be University, Thanjavur, Tamil Nadu, India-613401
2 shared publications - Kathhi Palaksha Reddy
School of Mechanical Engineering, SASTRA Deemed University, Thanjavur, India
2 shared publications Mariya Ratlami
U R Rao Satellite Centre, Indian Space Research Organisation, Bengaluru, India
2 shared publications
Latest Publications
- 16 September 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (11) , 5575-5592
Design, Manufacturing and High-Velocity Impact Behavior of a Composite Fan Blade for Gas Turbine Applications
- 16 September 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (11) , 5575-5592
Design, Manufacturing and High-Velocity Impact Behavior of a Composite Fan Blade for Gas Turbine Applications
- 17 June 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 240 (19) , 7582-7592
Microstructure, mechanical behaviour, and thermal shock effects of five layered thick Al/SiC functionally graded material fabricated by spark plasma sintering technique
Functionally graded materials (FGMs) with specific material compositional variations ranging from metal-rich to ceramic-rich provide plenty of advantages in aerospace, defence, and automotive applications. In this study, thick Al/SiC FGM was fabricated using the spark plasma sintering technique to investigate the microstructure, mechanical, and thermal shock behaviour. The fabricated thick FGM consisted of five layers with varying proportions of aluminium and silicon carbide, calculated using a power law formulation. The microstructural analysis confirmed the linear increment of the SiC particles across the thickness direction. The mechanical test findings revealed a tensile strength of 139 MPa and a compressive strength of 242 MPa, while micro-hardness and free vibration analysis was carried out further. The thermal shock test micrographs indicated the interfacial fractures and the existence of thick oxide layer, which also confirms through EDS mapping. These research findings enhance the understanding the mechanical and thermal loading behaviour of the Al/SiC FGM’s, which will potentially contributing the usage of FGMs in the advanced engineering applications.
- 17 June 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 240 (19) , 7582-7592
Microstructure, mechanical behaviour, and thermal shock effects of five layered thick Al/SiC functionally graded material fabricated by spark plasma sintering technique
Functionally graded materials (FGMs) with specific material compositional variations ranging from metal-rich to ceramic-rich provide plenty of advantages in aerospace, defence, and automotive applications. In this study, thick Al/SiC FGM was fabricated using the spark plasma sintering technique to investigate the microstructure, mechanical, and thermal shock behaviour. The fabricated thick FGM consisted of five layers with varying proportions of aluminium and silicon carbide, calculated using a power law formulation. The microstructural analysis confirmed the linear increment of the SiC particles across the thickness direction. The mechanical test findings revealed a tensile strength of 139 MPa and a compressive strength of 242 MPa, while micro-hardness and free vibration analysis was carried out further. The thermal shock test micrographs indicated the interfacial fractures and the existence of thick oxide layer, which also confirms through EDS mapping. These research findings enhance the understanding the mechanical and thermal loading behaviour of the Al/SiC FGM’s, which will potentially contributing the usage of FGMs in the advanced engineering applications.
- 13 January 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (3) , 1531-1544
Computational Studies on the Strain Energy and Natural Frequency of a Parabolic Deployable Composite Boom for Space Antenna Structures
- 13 January 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (3) , 1531-1544
Computational Studies on the Strain Energy and Natural Frequency of a Parabolic Deployable Composite Boom for Space Antenna Structures
- 20 December 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (3) , 1467-1478
Aluminium Tri-Hydroxide Modified Epoxy Resin as a Flame-Retardant Edge-Sealant to Mitigate Flammability in Drilled CFRP Composites
- 20 December 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (3) , 1467-1478
Aluminium Tri-Hydroxide Modified Epoxy Resin as a Flame-Retardant Edge-Sealant to Mitigate Flammability in Drilled CFRP Composites
- 25 October 2025
- Published by Springer Nature
- p. 77-93
Influence of B4C Fillers in the High Velocity Impact Responses of Kevlar Epoxy Composite Plates at Elevated Temperature
- 25 October 2025
- Published by Springer Nature
- p. 77-93
Influence of B4C Fillers in the High Velocity Impact Responses of Kevlar Epoxy Composite Plates at Elevated Temperature
- 20 July 2025
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 78 (8) , 1-11
Experimental and Numerical Investigation of High-Velocity Impacts on Aluminium 6061 Plates under Thermal Environment
- 20 July 2025
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 78 (8) , 1-11
Experimental and Numerical Investigation of High-Velocity Impacts on Aluminium 6061 Plates under Thermal Environment
- 14 February 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (3) , 1297-1317
Analysis on Varying Cross-sectional Design Parameters of Lenticular Deployable Composite Boom
- 14 February 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (3) , 1297-1317
Analysis on Varying Cross-sectional Design Parameters of Lenticular Deployable Composite Boom
- Open Access
- 19 December 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 19 (1)
High-velocity impact studies of honeycomb sandwich structures with Al/Al2O3 and Al/B4C functionally graded plasma sprayed faceplates
High-velocity impact response of honeycomb sandwich structures (HSS) with Al/Al2O3 and Al/B4C functionally graded plasma-sprayed (FGPS) faceplates are investigated in present work. FGPS structures improve the specific material properties and make the structure distinct from the substrate material. The metal and ceramic content was varied across the thickness of the FGPS coating in the present work. The HSS having honeycomb core sandwiched between two Al/Al2O3 FGPS faceplates were manufactured initially. Further, HSS having honeycomb core sandwiched between two Al/B4C FGPS faceplates were manufactured. Such HSS are repeatedly impacted with a spherical projectile using a single-stage gas gun at a constant impact energy of 260 J, and the results are quantified and compared. The central deflection and dent diameter of FGPS plates as well as HSS were determined, and they increased with the number of impacts. The HSS’s energy absorption was dissipated by top faceplate indentation and core compression. The incorporation of a core prevented FGPS coating delamination and top faceplate penetration. The Al/Al2O3 and Al/B4C FGPS faceplates had dent diameters that were 14.30% and 18.70% smaller than the non-coated Al 6061-T6 faceplate, respectively, which proves the enhancement of high-velocity impact resistance through FGPS coating. The central deflection and dent diameter of the Al/B4C FGPS HSS are 6.04% and 3% lesser than the Al/Al2O3 FGPS HSS, respectively. The energy absorption of the Al/B4C FGPS HSS is better than that of the Al/Al2O3 FGPS HSS. As a result, the present research enhances the knowledge on the impact energy absorption of two distinct FGPS coated plates and HSS, which is highly useful in aerospace and defence applications.
- 19 December 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 19 (1)
Open AccessHigh-velocity impact studies of honeycomb sandwich structures with Al/Al2O3 and Al/B4C functionally graded plasma sprayed faceplates
High-velocity impact response of honeycomb sandwich structures (HSS) with Al/Al2O3 and Al/B4C functionally graded plasma-sprayed (FGPS) faceplates are investigated in present work. FGPS structures improve the specific material properties and make the structure distinct from the substrate material. The metal and ceramic content was varied across the thickness of the FGPS coating in the present work. The HSS having honeycomb core sandwiched between two Al/Al2O3 FGPS faceplates were manufactured initially. Further, HSS having honeycomb core sandwiched between two Al/B4C FGPS faceplates were manufactured. Such HSS are repeatedly impacted with a spherical projectile using a single-stage gas gun at a constant impact energy of 260 J, and the results are quantified and compared. The central deflection and dent diameter of FGPS plates as well as HSS were determined, and they increased with the number of impacts. The HSS’s energy absorption was dissipated by top faceplate indentation and core compression. The incorporation of a core prevented FGPS coating delamination and top faceplate penetration. The Al/Al2O3 and Al/B4C FGPS faceplates had dent diameters that were 14.30% and 18.70% smaller than the non-coated Al 6061-T6 faceplate, respectively, which proves the enhancement of high-velocity impact resistance through FGPS coating. The central deflection and dent diameter of the Al/B4C FGPS HSS are 6.04% and 3% lesser than the Al/Al2O3 FGPS HSS, respectively. The energy absorption of the Al/B4C FGPS HSS is better than that of the Al/Al2O3 FGPS HSS. As a result, the present research enhances the knowledge on the impact energy absorption of two distinct FGPS coated plates and HSS, which is highly useful in aerospace and defence applications.
- Open Access
- 25 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-17
Mechanical characterization and impact damage assessment of Al/SiC functionally graded coating under elevated temperatures
Functionally graded materials are a class of composite materials that finds widespread use in aerospace, defense and automobile applications due to their tailored material properties for the specific need. In the present research, impact dynamics and the damage behavior of functionally graded plasma spray coating (FGPS) on an aluminium 6061-T6 substrate under high velocity impact at various temperatures were studied. The FGPS coating consists of four layers having various proportions of Al and SiC (50/50, 40/60, 30/70 and 20/80 weight percentages) and the coating thickness was measured to be 232.8 μm. Experiments were carried out at 260 J of impact energy on the FGPS samples at various temperatures using a single-stage gas gun along with the thermal setup. A finite element model was developed with the Johnson-Cook damage model and piecewise linear plasticity material model, along with suitable contact algorithms. Impact simulations at various temperatures reveal that the stiffness reduction at higher temperatures results in decreased peak contact force, decreased rebound velocity and increased central deflection. The molten splats observed through the micro-morphological study have spread several micrometers, which indicates excellent bonding between the particles and the porosity content was found to be 1.35%. The research findings on the impact dynamics and damage behavior of FGPS can significantly improve material design for a wide range of applications.
- 25 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-17
Open AccessMechanical characterization and impact damage assessment of Al/SiC functionally graded coating under elevated temperatures
Functionally graded materials are a class of composite materials that finds widespread use in aerospace, defense and automobile applications due to their tailored material properties for the specific need. In the present research, impact dynamics and the damage behavior of functionally graded plasma spray coating (FGPS) on an aluminium 6061-T6 substrate under high velocity impact at various temperatures were studied. The FGPS coating consists of four layers having various proportions of Al and SiC (50/50, 40/60, 30/70 and 20/80 weight percentages) and the coating thickness was measured to be 232.8 μm. Experiments were carried out at 260 J of impact energy on the FGPS samples at various temperatures using a single-stage gas gun along with the thermal setup. A finite element model was developed with the Johnson-Cook damage model and piecewise linear plasticity material model, along with suitable contact algorithms. Impact simulations at various temperatures reveal that the stiffness reduction at higher temperatures results in decreased peak contact force, decreased rebound velocity and increased central deflection. The molten splats observed through the micro-morphological study have spread several micrometers, which indicates excellent bonding between the particles and the porosity content was found to be 1.35%. The research findings on the impact dynamics and damage behavior of FGPS can significantly improve material design for a wide range of applications.
- 8 November 2024
- Published by Springer Nature in Fibers and Polymers
- Vol. 25 (12) , 4899-4907
High-Velocity Impact Damage Assessment of Aluminum-Honeycomb-Cored Banana-Fiber-Reinforced Composite Structures Under Elevated Temperatures
- 8 November 2024
- Published by Springer Nature in Fibers and Polymers
- Vol. 25 (12) , 4899-4907
High-Velocity Impact Damage Assessment of Aluminum-Honeycomb-Cored Banana-Fiber-Reinforced Composite Structures Under Elevated Temperatures