SCStefano Campanari

Stefano Campanari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stefano Campanari has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pressurization of solid oxide fuel cells for innovative energy systems with ultra-low CO2 emissions

    by Alessandro Donazzi, Michele Pagliari, Alberto Cammarata, Martina Marasi, Dustin McLarty, Dylan Vandoni, Emanuele Martelli, Stefano Campanari

  • Open Access

    Assessing Nuclear Power for Italy’s Long-Term Energy Transition: Impact of Costs, Construction Time, and Networks

    by Matteo Catania, Federico Parolin, Fabrizio Fattori, Paolo Colbertaldo, Mario Motta, Stefano Campanari

    While nuclear has re-entered policy debates in several countries, including Italy, existing studies rarely investigate its cost-optimal role through energy system models, with endogenous representation.This study examines the conditions under which nuclear power could contribute to Italy’s decarbonisation pathway, from a whole-system, cost-optimal perspective. We extend the long-term integrated energy system model FENICE (Future Energy traNsition multI-seCtor model) with a novel investment formulation that distributes the expenditures over the construction period. We apply this to Italy, covering all energy sectors, multiple energy vectors, and all regions with the interconnecting infrastructure. The transition from 2025 to 2050 (net-zero target) is analysed through 120 scenarios varying nuclear investment costs, construction times (5-20 years), expansion options of electricity and hydrogen networks, and social discount rates.Results show that nuclear plays a significant role under combinations of relatively low investment costs, sufficiently short construction times, and depending on network development constraints. When nuclear investment costs exceed 5500 €/kWe or construction times surpass 15 years, installed capacity is substantially reduced or absent. In all climate target-compliant scenarios, solar and wind capacities increase several-fold from today, and this growth is not reversed when nuclear is present. Electricity and hydrogen network development strongly shapes outcomes: their expansion reduces the optimal nuclear capacity and shifts more renewable capacity southward, while constrained networks favour nuclear siting near northern demand centres.Overall, the study highlights the importance of adopting a whole-system perspective when assessing nuclear role in the long term, to avoid overlooking interactions with other energy system components.


  • Open Access

    Development of a 1D Finite-Volume Model for the Simulation of Solid Oxide Fuel Cells

    by Alberto Cammarata, Paolo Colbertaldo, Stefano Campanari

    This work presents the development and validation of a 1D finite-volume model for the simulation of planar solid oxide cells (SOCs), developed for integration in more complex systems and process simulations. The model allows to investigate the temperature, composition, and current density profiles along the channel. In this work, the Fick’s equations typically used to calculate the concentration overpotential due to H2 and H2O diffusion in the electrode are improved compared to 1D SOC models available in the literature. In particular, the approximate analytical solution of the dusty gas model (DGM) equations allows for a better definition of H2 and H2O mixture diffusion coefficients, which are relevant, for instance, in the case of solid oxide fuel cells (SOFCs) fed with reformate gas mixtures. Differently from other 1D models available in the literature, the model developed is validated using experimental SOFC polarization curves covering a wide range of operating conditions in terms of molar fraction of H2 (21–93%) and H2O (7–50%) in the fuel, temperature (550–750 °C), and fuel utilization factor (exceeding 90%), demonstrating that 1D SOC models retain a good description of the physical processes occurring within the cell. While this work focuses on a co-flow SOFC configuration, the model can simulate a counter-flow configuration and electrolysis operation without modifying the model equations.


  • Open Access

    Development of a 1D Finite-Volume Model for the Simulation of Solid Oxide Fuel Cells

    by Alberto Cammarata, Paolo Colbertaldo, Stefano Campanari

    This work presents the development and validation of a 1D, co-flow, finite-volume model for the simulation of planar SOFCs, developed for integration in more complex systems and process simulations. The model is calibrated and validated using experimental SOFC polarization curves in a wide range of operating conditions in terms of H2 and H2O molar fraction in the fuel, temperature, and fuel utilization factor, demonstrating good accuracy and the possibility to simulate the most relevant physical processes occurring within an SOFC and to investigate its internal operating conditions in terms of temperature, current density, and gas composition profiles.

  • Open Access

    Technical analysis of high-efficiency and flexible direct reduced iron plants integrated with high-temperature electrolysis

    by R. Scaccabarozzi, C. Artini, L. Mastropasqua, C. Mapelli, J. Brouwer, J.Y. Kim, H. Ghezel-Ayagh, P. Lehman, M. Jampani, N. Cavlovich, et al.


  • Open Access

    Techno-Economic Comparison of Blue and Turquoise Hydrogen Production Technologies

    by Alessandro de Cataldo, Paolo Colbertaldo, Stefano Campanari, Matteo Carmelo Romano

    The objective of this work is to analyze and compare systems for the production of low-carbon hydrogen from natural gas through methane pyrolysis. An electrically heated methane pyrolysis (MP) plant is modelled and compared with SMR-based technologies as (i) an advanced ultra-low emission blue hydrogen plant based on a Fired Tubular Reformer (FTR-Plus) and (ii) an Auto-thermal Reformer (ATR) with pre-combustion Carbon Capture. The plants were modeled and studied from a techno-economic perspective. The MP plant exhibits a conversion efficiency of 57.7%, compared to 71.3% for FTR-Plus and 73.6% for ATR, and captures 95.8% of CO2 as solid carbon, against 90.5% and 94.1% for FTR-Plus and ATR, respectively. The MP plant shows a Levelized Cost of Hydrogen (LCOH) of 3.4 €/kg for a capacity of 30 MWH2, LHV, with a natural gas price of 6 €/GJNG,LHV and electricity price of 60 €/MWhe. A sensitivity analysis is conducted to highlight the factors most influencing costs. Finally, the LCOH is compared with SMR-based plant costs for different capacities, considering CO2 transport via pipeline or truck. The MP plant proves competitive, particularly if carbon is economically valorized, for small to medium capacities due to the reduced capital expenditures and the absence of costs connected to CO2 transportation.


  • Techno-Economic Analysis of the Solid Oxide Semiclosed CO2 Cycle for Different Plant Sizes

    by Matteo Martinelli, Stefano Campanari, Emanuele Martelli

    This work presents a detailed techno-economic evaluation of the SOS-CO2 cycle, a hybrid semi-closed cycle with solid oxide fuel cells developed by Politecnico di Milano. for different plant sizes, ranging from large utility plants (400 MWel) to industrial applications (50 MWel). The analysis includes the design and sizing of all the cycle components, including specific design optimization models for the most critical cycle components such as the regenerative heat exchanger and the turbine. Results are compared with the performance of the Allam cycle, an oxy-combustion cycle with higher technology readiness level. The results show that the SOS-CO2 cycle maintains high efficiency over the whole size range thanks to the modularity of the fuel cell and the regenerator which counterbalances the decrease in turbomachine efficiency at small sizes. For the utility scale plant, despite its higher specific investment cost (3761 €/kW vs. 2490€/kW), the SOS-CO2 cycle appears to be competitive with the Allam cycle in terms of cost of electricity (128.4 €/MWh and 127.8 €/MWh of the Allam cycle) thanks to its higher efficiency (68.9% vs. 53.1%). At smaller sizes, the higher efficiency and the lower dependance on the economies of scale make the SOS-CO2 more economically advantageous: for the 50 MWel plant, the cost of electricity of the SOS-CO2 is 175.8 €/MWh vs. 205.8 €/MWh of the Allam cycle.


  • Techno-Economic Analysis of the Solid Oxide Semi-Closed CO2 Cycle and Comparison With Other Power Generation Cycles With CO2 Capture

    by Matteo Martinelli, Roberto Scaccabarozzi, Manuele Gatti, Stefano Campanari, Emanuele Martelli

    This work presents the techno-economic analysis of the solid oxide semi-closed CO2 cycle (SOS-CO2), a hybrid semi-closed cycle with solid oxide fuel cells (SOFC) recently developed by Politecnico di Milano for power generation from natural gas with near-zero CO2 emissions. According to previous studies, the cycle is able to achieve an outstanding net electric efficiency of 75.7%. while capturing more than 99% of the generated CO2. All the cycles components, including the fuel cell and the turbine, have been designed and sized with the aim of assessing the performance and the capital cost. The energy and economic key performance indicators are compared with those of two benchmark cycles with CO2 capture: the Allam cycle and a combined cycle with amines. Moreover, a sensitivity analysis is performed on the forecasted cost of the natural gas and the SOFC stacks. The results indicate that the specific total capital requirement of the SOS-CO2 cycle (2504 €/kWel) is considerably higher than the Allam cycle (1926 €/kWel) and combined cycle with amines (1981 €/kWel). On the other hand, the SOS-CO2 cycle benefits from its far higher efficiency (74.0% versus 53.9% of the Allam cycle and 52.8% of the combined cycle with amines) which makes the cycle less sensitive to the fuel cost and CO2 tax. In terms of cost of electricity, the SOS-CO2 cycle turns out to be the best technology for natural gas prices above 8 €/GJ, while the Allam cycle appears to be the preferred option at lower fuel prices. For a fuel cost of 12 €/GJ, the SOS-CO2 cycle features a cost of electricity of 106.2 €/MWh, lower than the Allam cycle (119.1 €/MWh) and the combined cycle with amines (126.9 €/MWh).


  • Experimental Analysis of the Effect of Cathodic CO2 Supply to Industrial Solid Oxide Fuel Cells

    by Michele Pagliari, Dario Montinaro, Emanuele Martelli, Stefano Campanari, Alessandro Donazzi

    The integration of Solid Oxide Fuel Cells (SOFCs) in hybrid power generation systems offers the opportunity to achieve higher electric efficiencies. In the SOS-CO2 cycle [1], a newly developed cycle for blue power production (i.e., power generated starting from natural gas while capturing CO2), the SOFC cathode is supplied with mixtures of CO2 and O2, up to 79% CO2 molar fraction, while the anode is supplied with a reformate feed, containing H2, CH4, CO, CO2, and water vapour. Aim of this work is to experimentally evaluate the performance and the durability of industrial 5x5 cm2 Ni-YSZ anode-supported SOFCs under the SOS-CO2 cycle conditions, focusing on the effects of the CO2-rich cathodic atmosphere. The cells mounted a LSCF-based (La0.6Sr0.4Co0.2Fe0.8O3) single phase cathode, coated by a current collection layer of LSC (La0.6Sr0.4CoO3). Laboratory tests were performed at 700°C, acquiring polarization (I/V) curves and EIS spectra by means of a Horiba – FuelCon C50 Evaluator test station. Initial investigations with 7% humidified H2 and 21/79 O2/CO2 cathodic mixture revealed 25% power loss compared to the base case with cathodic air. The test showed not only that the loss of performance was stable in time, but also that the power reduction was reversible since the initial performance in air was recovered. The EIS spectra showed an increase of the polarization resistance and of the ohmic resistance upon feeding CO2. This latter observation suggested a reduction of the electronic conductivity of the cathode, compatible with the formation of Sr carbonates on the perovskite surface [2–4]. To assess the performance of the SOFC under the operating conditions of the SOS-CO2 cycle, the anode was supplied with reformate. Compared to the base case with humidified hydrogen and air, the current density at 0.7 V decreased by 37% (490 mA/cm2). When supplying the 21/79 O2/CO2 mixture at the cathode, the current density stabilized at 420 mA/cm2 (Figure 1). Durability tests (over 300 h) at 700°C with reformate and 21/79 O2/CO2 mixture highlighted a moderate decrease of the current density at 0.7 V. After these tests, the cathode was characterized post-mortem with XRD, SEM and Raman to analyse the consequences of the prolonged exposure to CO2. To further quantify the effect of CO2 on the cathode, symmetric button cells were also characterized with EIS, measuring ohmic and polarization resistances. The results suggested that the adsorption of CO2 is reversible and indicated a better suitability of LSCF- compared to LSC-based cathodes for operations with CO2-rich mixtures. Experiments performed between 550 and 700°C at varying CO2 and O2 partial pressures allowed to describe the kinetics of the oxygen reduction reaction and extract its activation energy. Overall, the results provided key elements for the integration of SOFCs in the SOS-CO2 blue power technology. References [1] R. Scaccabarozzi, M. Gatti, S. Campanari, and E. Martelli, “Solid oxide semi-closed CO2 cycle: A hybrid power cycle with 75% net efficiency and zero emissions,” Appl. Energy, vol. 290, no. February, p. 116711, 2021. [2] Y. Chen et al., “A highly active, CO2-tolerant electrode for the oxygen reduction reaction,” Energy Environ. Sci., vol. 11, no. 9, pp. 2458–2466, Sep. 2018. [3] Y. Yu et al., “Chemical characterization of surface precipitates in La0.7Sr0.3Co0.2Fe0.8O3-δ as cathode material for solid oxide fuel cells,” J. Power Sources, vol. 333, pp. 247–253, Nov. 2016. [4] J. Hwang et al., “CO2 Reactivity on Cobalt-Based Perovskites,” J. Phys. Chem. C, vol. 122, no. 35, pp. 20391–20401, 2018. Figure 1 - Polarization curves of 5x5 cm2 industrial SOFC supplied with 1.0 Nl/min of 7% humidified hydrogen and 2.5 Nl/min of air (black); 0.5 Nl/min of reformate mixture and 1.2 Nl/min of air (red); 0.5 Nl/min of reformate mixture and 1.2 Nl/min of cathodic 21% O2 / 79% CO2 mixture (green). Figure 1