Paolo Colbertaldo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paolo Colbertaldo has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Stefano Campanari
Department of Energy, Politecnico di Milano, Via Lambruschini 4, 20156 Milano, Italy
16 shared publications Stefano Campanari
15 shared publications- Giulio Guandalini
Politecnico di Milano, Milano, Italy
11 shared publications - Elena Crespi
Fondazione Bruno Kessler Sustainable Energy Center Povo Italy
8 shared publications - Alberto Cammarata
Department of Energy, Politecnico di Milano, Via Lambruschini 4, 20156 Milano, Italy
5 shared publications Giulio Guandalini
5 shared publications
Latest Publications
- 20 October 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 285
System-level analysis of switching strategies in reversible solid oxide cells under controlled thermal gradients
- 20 October 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 285
System-level analysis of switching strategies in reversible solid oxide cells under controlled thermal gradients
- Open Access
- 30 July 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 368
Dynamic modelling and control of a nuclear hybrid energy system with high-temperature electrolysis for electricity and hydrogen production
- 30 July 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 368
Open AccessDynamic modelling and control of a nuclear hybrid energy system with high-temperature electrolysis for electricity and hydrogen production
- Open Access
- 30 July 2026
- Published by Elsevier in SSRN Electronic Journal
Assessing the impact of electrical transmission grids on long-term energy planning through coupling with optimal power flow
Long-term energy system models are widely used to support decarbonisation planning, but their policy relevance depends on how well they represent the interaction between technology choices and grid constraints. Energy planning models often simplify the transmission grid through aggregated inter-regional exchanges, potentially overlooking nodal congestion that affects renewable integration, flexibility needs, and siting.This paper develops and tests an iterative bidirectional soft-linking framework between FENICE (Future Energy transition multI-seCtor modEl), a regional multi-sector long-term energy system model, and an optimal power flow (OPF) model. FENICE provides regional investment, demand, storage, and transmission-expansion decisions, while the OPF model evaluates the power flows through a nodal representation of the transmission grid. The OPF assessment is performed with hourly resolution for each representative year, and the resulting nodal flows are aggregated into regional flow constraints for subsequent FENICE iterations.The framework is applied to the Italian energy system. Compared with the uncoupled FENICE results, the iterative framework yields different technology portfolio and spatial allocation of investments. In 2050, wind capacity decreases by 25%, battery capacity more than doubles, thermoelectric generation capacity rises ten-fold, and curtailment increases by 60%. The differences concentrate in specific regions and transfer corridors affected by recurrent congestion, especially along island-to-mainland and south-to-north routes.These results provide evidence that simplified grid representations can distort policy-relevant trade-off results and may affect decisions on renewable siting, storage needs, dispatchable capacity, and transmission constraints. Embedding a detailed transmission grid representation in long-term planning can therefore allow network constraints to influence investment pathways, rather than leaving transmission feasibility as a separate assessment.
- 30 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssessing the impact of electrical transmission grids on long-term energy planning through coupling with optimal power flow
Long-term energy system models are widely used to support decarbonisation planning, but their policy relevance depends on how well they represent the interaction between technology choices and grid constraints. Energy planning models often simplify the transmission grid through aggregated inter-regional exchanges, potentially overlooking nodal congestion that affects renewable integration, flexibility needs, and siting.This paper develops and tests an iterative bidirectional soft-linking framework between FENICE (Future Energy transition multI-seCtor modEl), a regional multi-sector long-term energy system model, and an optimal power flow (OPF) model. FENICE provides regional investment, demand, storage, and transmission-expansion decisions, while the OPF model evaluates the power flows through a nodal representation of the transmission grid. The OPF assessment is performed with hourly resolution for each representative year, and the resulting nodal flows are aggregated into regional flow constraints for subsequent FENICE iterations.The framework is applied to the Italian energy system. Compared with the uncoupled FENICE results, the iterative framework yields different technology portfolio and spatial allocation of investments. In 2050, wind capacity decreases by 25%, battery capacity more than doubles, thermoelectric generation capacity rises ten-fold, and curtailment increases by 60%. The differences concentrate in specific regions and transfer corridors affected by recurrent congestion, especially along island-to-mainland and south-to-north routes.These results provide evidence that simplified grid representations can distort policy-relevant trade-off results and may affect decisions on renewable siting, storage needs, dispatchable capacity, and transmission constraints. Embedding a detailed transmission grid representation in long-term planning can therefore allow network constraints to influence investment pathways, rather than leaving transmission feasibility as a separate assessment.
- Open Access
- 20 April 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 358
Sectoral and spatial decomposition methods for multi-sector capacity expansion models
- 20 April 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 358
Open AccessSectoral and spatial decomposition methods for multi-sector capacity expansion models
- Open Access
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Assessing Nuclear Power for Italy’s Long-Term Energy Transition: Impact of Costs, Construction Time, and Networks
While nuclear has re-entered policy debates in several countries, including Italy, existing studies rarely investigate its cost-optimal role through energy system models, with endogenous representation.This study examines the conditions under which nuclear power could contribute to Italy’s decarbonisation pathway, from a whole-system, cost-optimal perspective. We extend the long-term integrated energy system model FENICE (Future Energy traNsition multI-seCtor model) with a novel investment formulation that distributes the expenditures over the construction period. We apply this to Italy, covering all energy sectors, multiple energy vectors, and all regions with the interconnecting infrastructure. The transition from 2025 to 2050 (net-zero target) is analysed through 120 scenarios varying nuclear investment costs, construction times (5-20 years), expansion options of electricity and hydrogen networks, and social discount rates.Results show that nuclear plays a significant role under combinations of relatively low investment costs, sufficiently short construction times, and depending on network development constraints. When nuclear investment costs exceed 5500 €/kWe or construction times surpass 15 years, installed capacity is substantially reduced or absent. In all climate target-compliant scenarios, solar and wind capacities increase several-fold from today, and this growth is not reversed when nuclear is present. Electricity and hydrogen network development strongly shapes outcomes: their expansion reduces the optimal nuclear capacity and shifts more renewable capacity southward, while constrained networks favour nuclear siting near northern demand centres.Overall, the study highlights the importance of adopting a whole-system perspective when assessing nuclear role in the long term, to avoid overlooking interactions with other energy system components.
- 6 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssessing Nuclear Power for Italy’s Long-Term Energy Transition: Impact of Costs, Construction Time, and Networks
While nuclear has re-entered policy debates in several countries, including Italy, existing studies rarely investigate its cost-optimal role through energy system models, with endogenous representation.This study examines the conditions under which nuclear power could contribute to Italy’s decarbonisation pathway, from a whole-system, cost-optimal perspective. We extend the long-term integrated energy system model FENICE (Future Energy traNsition multI-seCtor model) with a novel investment formulation that distributes the expenditures over the construction period. We apply this to Italy, covering all energy sectors, multiple energy vectors, and all regions with the interconnecting infrastructure. The transition from 2025 to 2050 (net-zero target) is analysed through 120 scenarios varying nuclear investment costs, construction times (5-20 years), expansion options of electricity and hydrogen networks, and social discount rates.Results show that nuclear plays a significant role under combinations of relatively low investment costs, sufficiently short construction times, and depending on network development constraints. When nuclear investment costs exceed 5500 €/kWe or construction times surpass 15 years, installed capacity is substantially reduced or absent. In all climate target-compliant scenarios, solar and wind capacities increase several-fold from today, and this growth is not reversed when nuclear is present. Electricity and hydrogen network development strongly shapes outcomes: their expansion reduces the optimal nuclear capacity and shifts more renewable capacity southward, while constrained networks favour nuclear siting near northern demand centres.Overall, the study highlights the importance of adopting a whole-system perspective when assessing nuclear role in the long term, to avoid overlooking interactions with other energy system components.
- Open Access
Development of a 1D Finite-Volume Model for the Simulation of Solid Oxide Fuel Cells
This work presents the development and validation of a 1D finite-volume model for the simulation of planar solid oxide cells (SOCs), developed for integration in more complex systems and process simulations. The model allows to investigate the temperature, composition, and current density profiles along the channel. In this work, the Fick’s equations typically used to calculate the concentration overpotential due to H2 and H2O diffusion in the electrode are improved compared to 1D SOC models available in the literature. In particular, the approximate analytical solution of the dusty gas model (DGM) equations allows for a better definition of H2 and H2O mixture diffusion coefficients, which are relevant, for instance, in the case of solid oxide fuel cells (SOFCs) fed with reformate gas mixtures. Differently from other 1D models available in the literature, the model developed is validated using experimental SOFC polarization curves covering a wide range of operating conditions in terms of molar fraction of H2 (21–93%) and H2O (7–50%) in the fuel, temperature (550–750 °C), and fuel utilization factor (exceeding 90%), demonstrating that 1D SOC models retain a good description of the physical processes occurring within the cell. While this work focuses on a co-flow SOFC configuration, the model can simulate a counter-flow configuration and electrolysis operation without modifying the model equations.
Open AccessDevelopment of a 1D Finite-Volume Model for the Simulation of Solid Oxide Fuel Cells
This work presents the development and validation of a 1D finite-volume model for the simulation of planar solid oxide cells (SOCs), developed for integration in more complex systems and process simulations. The model allows to investigate the temperature, composition, and current density profiles along the channel. In this work, the Fick’s equations typically used to calculate the concentration overpotential due to H2 and H2O diffusion in the electrode are improved compared to 1D SOC models available in the literature. In particular, the approximate analytical solution of the dusty gas model (DGM) equations allows for a better definition of H2 and H2O mixture diffusion coefficients, which are relevant, for instance, in the case of solid oxide fuel cells (SOFCs) fed with reformate gas mixtures. Differently from other 1D models available in the literature, the model developed is validated using experimental SOFC polarization curves covering a wide range of operating conditions in terms of molar fraction of H2 (21–93%) and H2O (7–50%) in the fuel, temperature (550–750 °C), and fuel utilization factor (exceeding 90%), demonstrating that 1D SOC models retain a good description of the physical processes occurring within the cell. While this work focuses on a co-flow SOFC configuration, the model can simulate a counter-flow configuration and electrolysis operation without modifying the model equations.
- Open Access
- 26 January 2026
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 3
Hydrogen Production by Means of Small-Scale Multi-Tower CSP Plants Based on sCO2 Power Cycles and Solid Oxide Electrolysers
Concentrated Solar Power can play a relevant role in the decarbonization of the energy sector as it can integrate cost-competitive Thermal Energy Storage, allowing for dispatchable electricity generation. Furthermore, there has been a notable increase in hydrogen demand over the past decade, with most of it being produced using fossil fuels, entailing a large contribution in CO₂ emissions. In this context, the Italian Research Project of National Relevance MUSIC aims to demonstrate the potential of small-scale multi-tower concentrated solar power plants with sodium as heat transfer fluid that are thermally and electrically integrated with a solid oxide electrolyzer to produce green hydrogen and electricity. The objective of this study is to evaluate the performance of a 2 MWel plant for hydrogen production located in Sicily, Italy, by means of numerical models specifically developed to accurately simulate the plant components. A parametric analysis on the number of modules has been carried out and the results show that plants characterized by a smaller field achieve higher optical efficiencies and a lower auxiliary consumption of the HTF pump, at the expenses of lower receiver and piping thermal efficiencies. A maximum yearly solar to hydrogen efficiency of 16.6% was achieved, which largely exceeds the one of conventional PV + PEM systems, proving the potential of the technology.
- 26 January 2026
- Published by TIB Open Publishing in SolarPACES Conference Proceedings
- Vol. 3
Open AccessHydrogen Production by Means of Small-Scale Multi-Tower CSP Plants Based on sCO2 Power Cycles and Solid Oxide Electrolysers
Concentrated Solar Power can play a relevant role in the decarbonization of the energy sector as it can integrate cost-competitive Thermal Energy Storage, allowing for dispatchable electricity generation. Furthermore, there has been a notable increase in hydrogen demand over the past decade, with most of it being produced using fossil fuels, entailing a large contribution in CO₂ emissions. In this context, the Italian Research Project of National Relevance MUSIC aims to demonstrate the potential of small-scale multi-tower concentrated solar power plants with sodium as heat transfer fluid that are thermally and electrically integrated with a solid oxide electrolyzer to produce green hydrogen and electricity. The objective of this study is to evaluate the performance of a 2 MWel plant for hydrogen production located in Sicily, Italy, by means of numerical models specifically developed to accurately simulate the plant components. A parametric analysis on the number of modules has been carried out and the results show that plants characterized by a smaller field achieve higher optical efficiencies and a lower auxiliary consumption of the HTF pump, at the expenses of lower receiver and piping thermal efficiencies. A maximum yearly solar to hydrogen efficiency of 16.6% was achieved, which largely exceeds the one of conventional PV + PEM systems, proving the potential of the technology.
- Open Access
- 19 January 2026
- Published by MDPI AG in Preprints.org
Development of a 1D Finite-Volume Model for the Simulation of Solid Oxide Fuel Cells
This work presents the development and validation of a 1D, co-flow, finite-volume model for the simulation of planar SOFCs, developed for integration in more complex systems and process simulations. The model is calibrated and validated using experimental SOFC polarization curves in a wide range of operating conditions in terms of H2 and H2O molar fraction in the fuel, temperature, and fuel utilization factor, demonstrating good accuracy and the possibility to simulate the most relevant physical processes occurring within an SOFC and to investigate its internal operating conditions in terms of temperature, current density, and gas composition profiles.
- 19 January 2026
- Published by MDPI AG in Preprints.org
Open AccessDevelopment of a 1D Finite-Volume Model for the Simulation of Solid Oxide Fuel Cells
This work presents the development and validation of a 1D, co-flow, finite-volume model for the simulation of planar SOFCs, developed for integration in more complex systems and process simulations. The model is calibrated and validated using experimental SOFC polarization curves in a wide range of operating conditions in terms of H2 and H2O molar fraction in the fuel, temperature, and fuel utilization factor, demonstrating good accuracy and the possibility to simulate the most relevant physical processes occurring within an SOFC and to investigate its internal operating conditions in terms of temperature, current density, and gas composition profiles.
- Open Access
- 29 November 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 348
Analysing the pace of the energy transition under different cumulative CO2 budgets
- 29 November 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 348
Open AccessAnalysing the pace of the energy transition under different cumulative CO2 budgets
- Open Access
- 18 October 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 543
Electrochemical characterization and model investigation of BaZr0.625Ce0.2Y0.175O3-δ based proton conductive ceramic cells
- 18 October 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 543
Open AccessElectrochemical characterization and model investigation of BaZr0.625Ce0.2Y0.175O3-δ based proton conductive ceramic cells