RDRolf Dach

Rolf Dach

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rolf Dach has a total of 101 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The International GNSS Service - in support of GNSS applications in the frame of GGOS

    by Rolf Dach, Camille Martire, Elisabetta D'ANastasio, Markus Bradke, Thomas Herring, Ryan Ruddick

    Global Navigation Satellite Systems (GNSS) underpin a wide range of scientific and societal applications across a broad spectrum of timescales and disciplines, such as positioning navigation and timing (PNT), surveying, environmental and climate research, geohazard risk reduction, or space weather monitoring. Most of these applications rely on accurate clock corrections and precise orbit models based on a stable global reference frame, along with well defined conventions for antenna calibrations and system biases.Established over 30 years ago, the International GNSS Service (IGS) meets these critical needs by continuously delivering a suite of openly accessible high-quality data, products, standards, and services. All IGS products adhere to a core principle: solutions from multiple analysis centres are rigorously compared, combined, and provided at maximum accuracy over latencies ranging from real-time to final.We present the full range of IGS data and products available to the user community, with particular emphasis on recent additions and expansions. We also outline the critical components of the IGS infrastructure that enable these products, and discuss upcoming developments designed to foster broader community participation and innovation. Finally, we position IGS activities within the wider geodetic landscape, highlighting its role as a core component of the global geodesy supply chain.

  • Open Access

    BDS and QZSS in CODE's final solution -- assessment of the impact 

    by Rolf Dach, Elmar Brockmann, Daniel Arnold, Maciej Kalarus, Martin Lasser, Stefan Schaer, Pascal Stebler, Adrian Jäggi

    CODE (Center for Orbit Determination in Europe) acts as one of the analysis centers of the International GNSS Service (IGS). One of the most important products are the final series providing -- among others -- GNSS satellite orbits, satellite clock corrections and station coordinates. Currently it includes GPS, GLONASS, and Galileo satellites. The final solution series shall provide the user community a direct access to the IGS20 reference frame (the IGS-specific realization of the ITRF2020).Regarding this purpose, the extension of the final products to other systems, in particular BDS and QZSS need a careful consideration not to degrade the access to the reference frame. We present a step-by-step inclusion of BDS (only satellites in MEO orbits) and all BDS satellites (apart from those ones in GEO orbits) using the new combined satellite antenna offsets recently computed by the IGS. Another investigation is related to the QZSS satellites where pre-launch satellite antenna calibrations are available.As a result of the study, a potential extension of the CODE final solution series to a more complete multi-GNSS product is decided.

  • Open Access

    Review the IGS Strategy for Precise Point Positioning Applications

    by Rolf Dach, Daniel Arnold, Elmar Brockmann, Maciej Kalarus, Lars Prange, Stefan Schaer, Pascal Stebler, Adrian Jäggi

    Within the IGS, it was agreed that Precise Point Positioning (PPP) based on satellite orbit and clock corrections of the IGS analysis centers allow a direct access to the IGS realization of the International Terrestrial Reference Frame (ITRF). This convention is considered convenient for all PPP users and should not be changed in future.On the other hand, the groups determining the GNSS satellite orbits do prefer an origin of the frame that is related to the Earth instantaneous center of mass since this is the reference of the gravitational orbit force model. With this background, some discussions take place to change the convention related to the origin of the terrestrial frame because it is convenient for the orbit determination. This convention is, however, in contradiction to the expected needs of the PPP users that do prefer a stable coordinate origin in time.We will introduce a strategy to serve both needs by applying the center of mass corrections for the orbit determination only.

  • Open Access

    Investigating the independently derived tropospheric parameters at GNSS-VLBI co-located sites

    by Anastasiia Walenta, Claudia Flohrer, Rolf Dach, Daniela Thaller, Gerald Engelhardt

    This paper presents the next step of the recently undertaken comparison of the tropospheric parameters independently derived from the analysis of Very Long Baseline Interferometry (VLBI) and Global Navigation Satellite Systems (GNSS) data. We established a concept of cross-validation of the tropospheric parameters which allows us to focus now on the investigation of the discrepancies detected in the cross-validation. In particular, the dataset and its parameterization are examined in view of their impact on the obtained biases. The most recent 5 years of observations are considered, during which the sufficiently dense time series of observations are available for the legacy VLBI stations as well as for the new generation antennas following the VLBI Global Observing System (VGOS) specifications. In our study the co-location sites are limited to those observatories, where the legacy VLBI antenna, VGOS antenna and GNSS receiver are present. Furthermore, the tropospheric parameters are compared only at the common epochs, which are chosen to include the independently conducted observations of the legacy VLBI antenna, VGOS antenna and GNSS receiver during a defined time span. The corresponding solution parametrization is varied between intervals of VGOS, legacy and GNSS solution parametrizations in order to identify the most optimal duration. While the parameterization of the GNSS solution considers the tropospheric variations stable over 2 hours, the parameterization of VLBI solutions for legacy antennas is known to be reliable over a shorter 1-hour interval. The highly dense VGOS observations allow us to reach up to 20-minute duration without losing performance.

  • Open Access

    COST-G models of time-variable gravity for precise orbit determination

    by Ulrich Meyer, Heike Peter, Linda Geisser, Emilio Calero, Rolf Dach, Adrian Jäggi

    The Combination Service for Time-variable Gravity fields (COST-G) provides models of the time-variable Earth gravity field that may be used for precise orbit determination (POD). While the monthly snapshot solutions based on GRACE or GRACE-FO GPS and microwave ranging interferometer data are the best available information on the time-variable gravity field, their latency of about 2-3 months prevents their use in operational POD. COST-G also provides a signal model fitted to the monthly GRACE-FO gravity fields that is updated quarterly and allows for the prediction of time-variable gravity, e.g. for use in applications that rely on short latency like operational POD.We present POD results for LEO and MEO satellites based on the COST-G fitted signal model (FSM), where we put special attention on the impact of the C20 gravity field coefficient, which is poorly defined from the GRACE/GRACE-FO observations, but may be replaced by SLR-only or SLR+GRACE/GRACE-FO combined solutions. We moreover present an extension of the COST-G FSM, also covering the GRACE-period and therefore suited for reprocessing campaigns that rely on a consistent model of time-variable gravity.

  • Open Access

    Combined orbit and clock zero-difference solution at CODE: ambiguity resolution strategy

    by Emilio José Calero Rodríguez, Arturo Villiger, Stefan Schaer, Rolf Dach, Adrian Jäggi

    The use of zero-difference processing schemes becomes more and more popular within the GNSS (Global Navigation Satellite Systems) community. This change from double- to zero-difference approaches increases the demand of PPP-AR (Ambiguity Resolution for Precise Point Positioning) enabling products. Those products can be created in two ways, either estimate the geometrical part (orbits) based on a double-difference global network solution with a separate zero-difference solution for the clocks and phase biases, or in a combined zero-difference solution. The latter one allows a more flexible approach; however, the challenge lies in the handling of the increased number of parameters and ambiguity resolution.The estimation of combined orbit and clock zero-difference enabling products needs a thought-out design of the processing strategy, where the elimination and back-substitution steps are vital to deal with the large number of parameters. Nonetheless, the amount of ambiguity parameters dramatically grows with an increasing size of the network, posing some computational limitations, since they should not be eliminated for a successful ambiguity resolution. Such a restriction originates from fixing float orbits: their accuracy does not allow to estimate reliable ambiguity parameters. To cope with that, we propose a new algorithm capable to decouple them from the orbits, allowing to fix between-satellite ambiguities in a later station-wise parallelisation.On the poster, we describe selected details on the ambiguity resolution strategy that we have developed. The obtained results are characterized and compared to other solutions using classical ambiguity resolution schemes.

  • Open Access

    Compatibility between the preliminary ITRF2020 solution and GNSS antenna phase center offsets

    by Arturo Villiger, Rolf Dach, Lars Prange, Daniel Arnold, Maciek Kalarus, Stefan Schaer, Pascal Stebler, Adrian Jäggi

    The release of the next International Terrestrial Reference Frame (ITRF) 2020 is based on the four geodetic techniques, namely Satellite Laser Ranging (SLR), Very Long Baseline Interferometry (VLBI), Global Navigation Satellite Systems (GNSS), and Doppler Orbitography and Radio-positioning Integrated by Satellite instrument (DORIS). The upcoming release will presumably define the scale based on the first two techniques.The GNSS scale is mainly driven by the z-component of the satellite antenna phase center offsets. With the disclosure of the Galileo metadata by the European GNSS Agency (GSA) the satellite antenna pattern became available to the public and enabled the GNSS scale determination.We aim to analyze the consistency between the preliminary ITRF 2020 solution and the GNSS based scale. In addition, we will extend our study with all available TRF solutions and compare their consistency with the GNSS derived scale and discuss the resulting comparisons. 


  • Open Access

    Improving the products of global GNSS data analysis by correcting for loading displacements at the observation level

    by Lin Wang, Daniela Thaller, Andreja Susnik, Rolf Dach

    In recent years, the sensitivity of the GNSS station time series to the loading displacements is demonstrated by multiple studies, mainly for the non-tidal atmospheric loading (NTAL) and non-tidal ocean loading (NTOL). But the impact of the loading displacements is beyond the coordinate time series, including and not limited to geocenter motion, Earth Orientation Parameters, satellite orbits, etc. We extensively evaluate the impact on and the improvements of the reference frame products from reprocessed 25 years of GPS and GLONASS network solution with a consistent application of non-tidal loading and Continental Water Storage Loading (CWSL) displacement at the observational level. We also discussed the differences of correcting for the loading displacements at the observation level and correction at the product level on GNSS station coordinates and Geocenter motions, we elaborate the advantage of the inclusion of correction at the observational level. Significant improvements are found in estimated coordinate time series, almost 90% of the station shows improved WRMS in North and Up directions and over 75% in East. CWSL dominates the contribution in the North direction. The annual Geocenter variations (over 80% of the x and y components) can be explained by the loading displacement. A small and consistent reduction of orbit disclosure is found among all 32 GPS satellites and most of the GLONASS satellites (23 out of 25) after the inclusion of all the loading displacements.  All the improvements demonstrate the urgent need for the adoption of loading displacements in the global GNSS analysis.

  • Open Access

    Application of Machine Learning for Evaluation of GNSS Processing Protocols

    by Severin Rhyner, Denis Jordan, Dante Salvini, Rolf Dach

    The Center for Orbit Determination in Europe (CODE) hosts one of the global analysis centers of the International GNSS Service (IGS). Each day, the data of about 250 GNSS stations are processed in a highly automated manner. The processing protocols contain many quality parameters related to station coordinates, satellite orbits, and satellite/receiver clock corrections.In the context of a reprocessing campaign, 25 years of GNSS measurements are analysed within a short timeframe and therefore a huge number of processing protocols are generated. A manual inspection of all these protocols is highly time consuming. Machine learning (ML) represents a promising approach to provide a data driven and objective evaluation of these protocols. The main objective of a ML framework is to analyse a big number of independent quality parameters in order to automatically detect individual days with problems in the data analysis. Furthermore, we expect that ML could contribute to the detection of unexpected systematics in the solutions and has the potential to improve the GNSS analysis strategy.As a first step, we have focused on one aspect of the processing protocols, namely the orbit misclosures (discontinuities at the end of the orbital arcs) at midnight. It is known that the orbit modelling of GNSS satellites is more difficult during eclipse seasons. In order to assess the capabilities of different machine learning algorithms for our purpose, we have evaluated the magnitude of the orbit misclosures and have tried to recover the information on whether the satellite was passing the earth shadow or not. State-of-the-art ML algorithms (Random Forest and Decision Tree) showed promising results of up to 80% success rate.

  • Open Access

    Extension of the repro3 ANTEX file with BeiDou and QZSS satellite antenna pattern

    by Arturo Villiger, Rolf Dach, Lars Prange, Adrian Jäggi

    During the preparations for the International GNSS Service (IGS) contribution to the next reference frame, called repro3, the disclosed pre-launch chamber calibrated Galileo satellite antenna pattern were analyzed. Those tests revealed a discrepancy between the GPS and GLONASS z-component of the phase center offsets (PCO), aligned to the IGS14 scale, and the calibrated Galileo z-PCOs. In order to make the PCOs compatible to the repro3 it was decided to rely on the calibrated Galileo pattern and adjust the GPS and GLONASS PCOs accordingly. Combined with multi-GNSS receiver calibrations for all systems the repro3 might contribute to the scale determination for the next reference frame.As the repro3 is based on GPS, GLONASS, and Galileo only those three systems have been analyzed leading to the repro3 ANTEX file, containing all used antenna pattern, which is aligned to the Galileo induced scale. In order to extend the repro3 ANTEX file with satellite calibrations for BeiDou and QZSS a dedicated reprocessing based on CODEs MGEX solution is made to assess the available PCOs for those satellites and tests their consistency with the repro3 scale. The results should allow to extend the repro3 ANTEX with the BDS and QZSS pattern for experimental purposes.