Guowei Cai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Guowei Cai has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Chuang Liu
Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology, Northeast Electric Power University, Jilin 132012, China
8 shared publications - Dongbo Guo
Tsinghua University
4 shared publications - Yibo Wang
Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology, Northeast Electric Power University, Jilin 132012, China
4 shared publications - Bingda Zhu
Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology, Northeast Electric Power University, Jilin, China
3 shared publications - Cheng Liu
Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology, Ministry of Education, Northeast Electric Power University, Jilin 132012, China
3 shared publications Hanwen Zhang
Aalborg University, Aalborg, Denmark
3 shared publications
Latest Publications
- 11 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (2) , 2644-2659
Novel Bidirectional High-Frequency Isolated Direct AC/AC Converter With Unipolar Phase-Shifted Modulation Strategy
This paper introduces a novel bidirectional high-frequency isolated direct ac/ac converter with unipolar phase-shifted modulation strategy based on double dc modulation indexes. The main idea of topological construction is that the non-isolated two-level non-differential bipolar direct ac/ac converter is combined to the bidirectional phase-shifted full-bridge converter (PSHB), which inherits the advantages of no commutation problem, zero voltage switching (ZVS), simple control, bipolar output voltage gains, et al. The operating principles of this converter and the design considerations for the key parameters are given in detail. Moreover, the application in voltage sag/swell compensation is simply analyzed. Thanks to the high-frequency isolation capability, it satisfies needs of distribution networks in terms of sensitive loads protection, voltage resilience control without applying the bulky line frequency transformers. Finally, the feasibility of this proposed topology is verified by the various experimental results of the prototype.
- 11 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (2) , 2644-2659
Novel Bidirectional High-Frequency Isolated Direct AC/AC Converter With Unipolar Phase-Shifted Modulation Strategy
This paper introduces a novel bidirectional high-frequency isolated direct ac/ac converter with unipolar phase-shifted modulation strategy based on double dc modulation indexes. The main idea of topological construction is that the non-isolated two-level non-differential bipolar direct ac/ac converter is combined to the bidirectional phase-shifted full-bridge converter (PSHB), which inherits the advantages of no commutation problem, zero voltage switching (ZVS), simple control, bipolar output voltage gains, et al. The operating principles of this converter and the design considerations for the key parameters are given in detail. Moreover, the application in voltage sag/swell compensation is simply analyzed. Thanks to the high-frequency isolation capability, it satisfies needs of distribution networks in terms of sensitive loads protection, voltage resilience control without applying the bulky line frequency transformers. Finally, the feasibility of this proposed topology is verified by the various experimental results of the prototype.
- Open Access
- 18 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 74112-74120
A Three Phase Voltage Restorer Based on Bipolar Direct AC/AC Converters
A new topology is proposed to regulate voltage sags/swells in distribution network in this paper. Voltage sags and swells are a serious power quality problem faced by the power industry. The major traditional voltage restorer, based on energy storage device, is not adequate for compensating deep and long-duration voltage sags/swells. To solve this problem, a novel bipolar direct AC/AC type voltage restorer (AC/AC-VR) topology is proposed that both with bipolar regulation ability and needs no storage device. The restorer of each phase is connected on the other two phases and the power is tapped from them. By controlling the duty cycle of each AC/AC converter, the required voltage is realized to maintain stability. Analysis, simulation, and experimental results are presented to demonstrate the proposed topology.
- 18 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 74112-74120
Open AccessA Three Phase Voltage Restorer Based on Bipolar Direct AC/AC Converters
A new topology is proposed to regulate voltage sags/swells in distribution network in this paper. Voltage sags and swells are a serious power quality problem faced by the power industry. The major traditional voltage restorer, based on energy storage device, is not adequate for compensating deep and long-duration voltage sags/swells. To solve this problem, a novel bipolar direct AC/AC type voltage restorer (AC/AC-VR) topology is proposed that both with bipolar regulation ability and needs no storage device. The restorer of each phase is connected on the other two phases and the power is tapped from them. By controlling the duty cycle of each AC/AC converter, the required voltage is realized to maintain stability. Analysis, simulation, and experimental results are presented to demonstrate the proposed topology.
- 27 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (9) , 11420-11434
Direct AC-AC Converter Based on Odd Symmetrical No-Differential AC Chopper Legs With Unipolar Modulation Strategy
This article proposes a single-phase bipolar pulsewidth modulation direct ac–ac converter with unipolar modulation strategy. The converter is composed of two odd symmetrical two-level no-differential ac chopper legs, which can work in noninverting and inverting modes for the utility voltage sag or swell compensation. The number switches working at high frequency in each operating mode are minimized thanks to the proposed unipolar modulation strategy, so the total switching losses can be effectively reduced in theory, and the efficiency of the converter is improved. In addition, capacitor symmetry can be realized in the positive and negative half cycle of the input voltage, and the converter has no commutation problems. Finally, on the basis of theoretical analysis, the experimental results under different working conditions are also provided to verify the correctness of the theoretical analysis and the superiority of the proposed topology and modulation strategy.
- 27 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (9) , 11420-11434
Direct AC-AC Converter Based on Odd Symmetrical No-Differential AC Chopper Legs With Unipolar Modulation Strategy
This article proposes a single-phase bipolar pulsewidth modulation direct ac–ac converter with unipolar modulation strategy. The converter is composed of two odd symmetrical two-level no-differential ac chopper legs, which can work in noninverting and inverting modes for the utility voltage sag or swell compensation. The number switches working at high frequency in each operating mode are minimized thanks to the proposed unipolar modulation strategy, so the total switching losses can be effectively reduced in theory, and the efficiency of the converter is improved. In addition, capacitor symmetry can be realized in the positive and negative half cycle of the input voltage, and the converter has no commutation problems. Finally, on the basis of theoretical analysis, the experimental results under different working conditions are also provided to verify the correctness of the theoretical analysis and the superiority of the proposed topology and modulation strategy.
- Open Access
Modified Approach of Manufacturer’s Power Curve Based on Improved Bins and K-Means++ Clustering
The ideal wind turbine power curve provided by the manufacturer cannot monitor the practical performance of wind turbines accurately in the engineering stage; in this paper, a modified approach of the wind turbine power curve is proposed based on improved Bins and K-means++ clustering. By analyzing the wind speed-power data collected by the supervisory control and data acquisition system (SCADA), the relationship between wind speed and output is compared and elaborated on. On the basis of data preprocessing, an improved Bins method for equal frequency division of data is proposed, and the results are clustered through K-means++. Then, the wind turbine power curve correction is realized by data weighting and regression analysis. Finally, an example is given to show that the power curve of the same type of wind turbines, which, installed in different locations, are discrepant and different from the MPC, and the wind turbine power curve obtained by using this method can reflect the output characteristics of the wind turbine operating more effectively in a complex environment.
Open AccessModified Approach of Manufacturer’s Power Curve Based on Improved Bins and K-Means++ Clustering
The ideal wind turbine power curve provided by the manufacturer cannot monitor the practical performance of wind turbines accurately in the engineering stage; in this paper, a modified approach of the wind turbine power curve is proposed based on improved Bins and K-means++ clustering. By analyzing the wind speed-power data collected by the supervisory control and data acquisition system (SCADA), the relationship between wind speed and output is compared and elaborated on. On the basis of data preprocessing, an improved Bins method for equal frequency division of data is proposed, and the results are clustered through K-means++. Then, the wind turbine power curve correction is realized by data weighting and regression analysis. Finally, an example is given to show that the power curve of the same type of wind turbines, which, installed in different locations, are discrepant and different from the MPC, and the wind turbine power curve obtained by using this method can reflect the output characteristics of the wind turbine operating more effectively in a complex environment.
- 25 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (10) , 11855-11864
AC Voltage Synthesis Using Arbitrary Two-Phase Voltages: Frequency, Phase, and Amplitude Modulation for Direct AC–AC Power Conversion
Usually, the dc-link is employed as the intermediate stage of ac–ac power conversion for high controllability, good output quality, and stability, while the large-volume dc capacitors will lead to high equipment failure rate and maintenance cost. This article proposes an arbitrary two-phase input voltages based ac voltage synthesis method for direct ac–ac power conversion, which can realize the three-phase output voltages with controllable frequency, amplitude, and phase. Besides, the current harmonics generated by the proposed voltage synthesis method can be eliminated naturally through the phases’ cross-coupling. This feature avoids the harmonic pollution to the input currents. The corresponding modulation strategy for ac voltage synthesis is derived and analyzed in detail. Finally, a 3-kW experimental prototype is constructed. The results are consistent with the theoretical analysis.
- 25 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (10) , 11855-11864
AC Voltage Synthesis Using Arbitrary Two-Phase Voltages: Frequency, Phase, and Amplitude Modulation for Direct AC–AC Power Conversion
Usually, the dc-link is employed as the intermediate stage of ac–ac power conversion for high controllability, good output quality, and stability, while the large-volume dc capacitors will lead to high equipment failure rate and maintenance cost. This article proposes an arbitrary two-phase input voltages based ac voltage synthesis method for direct ac–ac power conversion, which can realize the three-phase output voltages with controllable frequency, amplitude, and phase. Besides, the current harmonics generated by the proposed voltage synthesis method can be eliminated naturally through the phases’ cross-coupling. This feature avoids the harmonic pollution to the input currents. The corresponding modulation strategy for ac voltage synthesis is derived and analyzed in detail. Finally, a 3-kW experimental prototype is constructed. The results are consistent with the theoretical analysis.
- 14 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (4) , 4195-4210
Line-Frequency-Isolation Flexible AC-Link Converter Based on Direct AC-AC Choppers
Line-frequency-isolation flexible ac-link converter based on direct ac–ac choppers (FACL) is a novel ac–ac power conversion device expected to realize voltage compensation and power flow control. Compared with the traditional voltage source inverter (VSI) based devices, FACL has no dc-link capacitors that lead to high equipment failure rate. First, this article systematically introduces FACL. The power conversion principle of FACL is analyzed, and the output comparison between the unipolar and bipolar FACL is presented. Then, a high-performance bipolar FACL is proposed. It eliminates the shortcomings of the existing FACL topologies, such as bidirectional switches, undesirable phase shift, and restricted output range. Additionally, for facilitating the control of FACLs, a variant of the conventional dq reference frame called DQ-ABC synchronous rotating reference frame (DSRRF) is adopted. DSRRF provides a platform for the flexible operation in the form of dc between two three-phase voltages, which is beneficial to FACL control. On the basis of DSRRF, the closed-loop control strategy of FACLs is designed so that the decoupling control and closed-loop control of the output voltage amplitude and phase can be achieved conveniently. Finally, the open-loop and closed-loop experimental tests are carried out based on a 1-kW experimental prototype to verify the theoretical analysis.
- 14 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (4) , 4195-4210
Line-Frequency-Isolation Flexible AC-Link Converter Based on Direct AC-AC Choppers
Line-frequency-isolation flexible ac-link converter based on direct ac–ac choppers (FACL) is a novel ac–ac power conversion device expected to realize voltage compensation and power flow control. Compared with the traditional voltage source inverter (VSI) based devices, FACL has no dc-link capacitors that lead to high equipment failure rate. First, this article systematically introduces FACL. The power conversion principle of FACL is analyzed, and the output comparison between the unipolar and bipolar FACL is presented. Then, a high-performance bipolar FACL is proposed. It eliminates the shortcomings of the existing FACL topologies, such as bidirectional switches, undesirable phase shift, and restricted output range. Additionally, for facilitating the control of FACLs, a variant of the conventional dq reference frame called DQ-ABC synchronous rotating reference frame (DSRRF) is adopted. DSRRF provides a platform for the flexible operation in the form of dc between two three-phase voltages, which is beneficial to FACL control. On the basis of DSRRF, the closed-loop control strategy of FACLs is designed so that the decoupling control and closed-loop control of the output voltage amplitude and phase can be achieved conveniently. Finally, the open-loop and closed-loop experimental tests are carried out based on a 1-kW experimental prototype to verify the theoretical analysis.
- 7 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (4) , 4052-4065
An Improved Bipolar-Type AC–AC Converter Topology Based on Nondifferential Dual-Buck PWM AC Choppers
A novel single-phase pulsewidth modulation (PWM) direct ac–ac converter based on two-level nondifferential dual-buck ac chopper legs with inverting and noninverting operations is first proposed in this article. It has the ability to resolve both voltage sag and swell problems at the same time when used as distributed flexible voltage conditioner. Compared to the traditional ac–ac converter, it has much enhanced system reliability thanks to no shoot-through problems even when all switches of each ac chopper legs are turned on , and therefore, the PWM dead time is not needed leading to improve the utilization of the duty cycles. Only half of the switches in the proposed converter is switched at high frequency during a switching period at most, which significantly reduces the total switching loss. In particularly, the converter has two greatest advantages that it retains the common sharing ground of the input and output and has the same buck/boost operation process for noninverting and inverting modes. In order to fully testify the performance of the proposed converter, a 500-W experimental prototype is built and tested at different conditions.
- 7 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (4) , 4052-4065
An Improved Bipolar-Type AC–AC Converter Topology Based on Nondifferential Dual-Buck PWM AC Choppers
A novel single-phase pulsewidth modulation (PWM) direct ac–ac converter based on two-level nondifferential dual-buck ac chopper legs with inverting and noninverting operations is first proposed in this article. It has the ability to resolve both voltage sag and swell problems at the same time when used as distributed flexible voltage conditioner. Compared to the traditional ac–ac converter, it has much enhanced system reliability thanks to no shoot-through problems even when all switches of each ac chopper legs are turned on , and therefore, the PWM dead time is not needed leading to improve the utilization of the duty cycles. Only half of the switches in the proposed converter is switched at high frequency during a switching period at most, which significantly reduces the total switching loss. In particularly, the converter has two greatest advantages that it retains the common sharing ground of the input and output and has the same buck/boost operation process for noninverting and inverting modes. In order to fully testify the performance of the proposed converter, a 500-W experimental prototype is built and tested at different conditions.
- 17 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1576-1588
An Isolated Modular Multilevel Converter (I-M2C) Topology Based on High-Frequency Link (HFL) Concept
This paper introduces the high-frequency link (HFL) concept into the modular multilevel converter (MMC) topology, which can totally reduce the individual DC-link capacitors at the high-voltage (HV) side. The proposed converter, called isolated modular multilevel converter (I-M2C), has basic triple ports of medium-voltage AC (MVAC), medium-voltage DC (MVDC), and low-voltage DC (LVDC). Thus, it is especially suitable for hybrid DC and AC applications in power generation and transmission, such as Solid-State Transformer (SST), etc. The fundamental principle and applied Phase-Shift Pulse Width Modulation (PSPWM) control scheme are presented in detail. And the design of the clamping circuit and analysis of duty loss are carried out. The experimental results are given to illustrate the efficient operation characteristics.
- 17 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1576-1588
An Isolated Modular Multilevel Converter (I-M2C) Topology Based on High-Frequency Link (HFL) Concept
This paper introduces the high-frequency link (HFL) concept into the modular multilevel converter (MMC) topology, which can totally reduce the individual DC-link capacitors at the high-voltage (HV) side. The proposed converter, called isolated modular multilevel converter (I-M2C), has basic triple ports of medium-voltage AC (MVAC), medium-voltage DC (MVDC), and low-voltage DC (LVDC). Thus, it is especially suitable for hybrid DC and AC applications in power generation and transmission, such as Solid-State Transformer (SST), etc. The fundamental principle and applied Phase-Shift Pulse Width Modulation (PSPWM) control scheme are presented in detail. And the design of the clamping circuit and analysis of duty loss are carried out. The experimental results are given to illustrate the efficient operation characteristics.
- Open Access
- 8 June 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (11) , 2353
A Coordinated Dual-Channel Wide Area Damping Control Strategy for a Doubly-Fed Induction Generator Used for Suppressing Inter-Area Oscillation
Using a doubly-fed induction generator (DFIG), with an additional active or reactive damping controller, is a new method of suppressing the inter-area oscillation of a power system. However, using active power modulation (APM) may decrease the damping of the shaft oscillation mode of a DFIG and the system damping target cannot be achieved through reactive power modulation (RPM) in some cases. Either single APM or RPM does not consider system damping and torsional damping simultaneously. In this paper, an active-reactive coordinated dual-channel power modulation (DCPM) damping controller is proposed for DFIGs. First, considering the electromechanical parts and control structure of the wind turbine, an electromechanical transient model and an additional damping controller model of DFIGs are established. Then, the dynamic objective function for coordinating the parameters of the additional damping controller is proposed. The ratio between the active power channel and reactive power channel modulation is derived from the parameters optimized by the particle swarm optimization algorithm. Finally, the effectiveness and practicability of the designed strategy is verified by comparing it with a traditional, simple damping controller design strategy. Standard simulation system examples are used in the comparison. Results show that the DCPM is better at maximizing the damping control capability of the rotor-side controller of a DFIG and simultaneously minimizing adverse effects on torsional damping than the traditional strategy.
- 8 June 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (11) , 2353
Open AccessA Coordinated Dual-Channel Wide Area Damping Control Strategy for a Doubly-Fed Induction Generator Used for Suppressing Inter-Area Oscillation
Using a doubly-fed induction generator (DFIG), with an additional active or reactive damping controller, is a new method of suppressing the inter-area oscillation of a power system. However, using active power modulation (APM) may decrease the damping of the shaft oscillation mode of a DFIG and the system damping target cannot be achieved through reactive power modulation (RPM) in some cases. Either single APM or RPM does not consider system damping and torsional damping simultaneously. In this paper, an active-reactive coordinated dual-channel power modulation (DCPM) damping controller is proposed for DFIGs. First, considering the electromechanical parts and control structure of the wind turbine, an electromechanical transient model and an additional damping controller model of DFIGs are established. Then, the dynamic objective function for coordinating the parameters of the additional damping controller is proposed. The ratio between the active power channel and reactive power channel modulation is derived from the parameters optimized by the particle swarm optimization algorithm. Finally, the effectiveness and practicability of the designed strategy is verified by comparing it with a traditional, simple damping controller design strategy. Standard simulation system examples are used in the comparison. Results show that the DCPM is better at maximizing the damping control capability of the rotor-side controller of a DFIG and simultaneously minimizing adverse effects on torsional damping than the traditional strategy.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (10) , 9585-9599
Novel Bipolar-Type Direct AC–AC Converter Topology Based on Non-Differential AC Choppers
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (10) , 9585-9599
Novel Bipolar-Type Direct AC–AC Converter Topology Based on Non-Differential AC Choppers