DGDongbo Guo

Dongbo Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dongbo Guo has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Series Bipolar Hybrid Voltage Optimizer Based on Switching-Cell-Inserted Direct AC–AC Converter and Multiwindings Transformer

    by Dongbo Guo, Dehao Kong, Zhongchen Pei, Xiaonan Gao, Chuang Liu, Pinjia Zhang, Cristian Garcia, Jose Rodriguez

    This article proposes a series bipolar hybrid voltage optimizer (B-HVO), which can work at the noninverting and inverting modes for addressing voltage sag/swell in the utility grid. The superiority of the proposed system is that the direct ac–ac converter cell is deeply integrated with the multiwindings line frequency transformer, which not only effectively diminishes the switches quantities, but also avoids the use of additional isolated transformers when it is applied to distribution network. The proposed B-HVO inherits the strengths of converters fast response and line frequency transformers long-life. The B-HVO has much system reliability because the direct ac–ac converter cell has no shoot-through and commutation problems. In addition, the converter uses four switches and only two switches are switched at high frequency during each half-cycle of input voltage, which evidently reduces the total switching losses. Detailed analysis is provided with experimental results to validate the effectiveness of the proposed system. Besides, the measured data of the proposed system in the engineering demonstration application also proves its validity in handling voltage fluctuation problems.


  • Open Access

    Collaborative Control of Reactive Power and Voltage in a Coupled System Considering the Available Reactive Power Margin

    by Jiahe Li, Dongbo Guo, Chuang Liu, Yichen Gu, Yonglin Duan, Yangyang Li

    This article proposes a hierarchical collaborative reactive power and voltage control method aimed at meeting the internal voltage requirements of a coupled system composed of centralized new energy stations such as wind and solar power and traditional thermal power units, with particular attention paid to the reactive power regulation ability of power units in new energy stations. This method is implemented in two layers: At the transmission layer, the overall reactive power compensation capacity of thermal power units and stations on the transmission lines within the system is determined according to the engineering requirements of different node voltages in the coupled system, the regulation voltages of the high-voltage grid-connected points and the point of common coupling (PCC) of the stations are found, and the actual regulation voltages of the PCCs of the stations are given as commands. At the station layer, based on determining reactive power distribution between power units and continuous reactive power compensation devices within each station, voltage optimization is carried out using the voltage command issued by the transmission layer as a reference. At the same time, consistency coordination between the transmission layer and the station layer is achieved based on the Analytical Target Cascading (ATC) method at different layers. Finally, simulation analysis was conducted on a regional coupled system in Dalian. The results showed that the method proposed in this paper can effectively control the voltage safety requirements of each region and PCC in the coupled system and, to some extent, improve the economic efficiency of system operation.


  • Open Access

    Dynamic Reactive Power Allocation Method of Power Grid with High-Permeability PV Considering Transient Voltage Stability

    by Yangyang Li, Dongfeng Yang, Chuang Liu, Dongbo Guo, Yichen Gu, Jiahe Li

    In order to solve the risk of transient voltage instability caused by the increasing proportion of new energy represented by photovoltaic (PV) and dynamic load in the power grid, a dynamic reactive power compensation device configuration method with high-permeability PV is proposed considering transient voltage stability. Firstly, a typical reactive power compensation device configuration is constructed, and evaluation indexes based on transient voltage disturbance and transient voltage peak are proposed. The static index based on complex network characteristics and the dynamic index based on sensitivity theory are used to guide the candidate nodes of dynamic reactive power compensation. Secondly, when reactive power capacity is configured, a differentiated dynamic reactive power compensation optimization model is established, and the multi-objective marine predator algorithm is used to solve the configured capacity, aiming to improve the transient voltage stability at the lowest reactive power investment cost. The final configuration scheme is selected by using the improved entropy weight ideal solution sorting method. Finally, the simulation results of the improved IEEE39-node system verify the effectiveness of the proposed method.


  • Novel Bidirectional High-Frequency Isolated Direct AC/AC Converter With Unipolar Phase-Shifted Modulation Strategy

    by Dongbo Guo, Aoran Wang, Chuang Liu, Pinjia Zhang, Guanyu Yan, Zhongchen Pei, Guowei Cai, Rutian Wang, Yibo Wang

    This paper introduces a novel bidirectional high-frequency isolated direct ac/ac converter with unipolar phase-shifted modulation strategy based on double dc modulation indexes. The main idea of topological construction is that the non-isolated two-level non-differential bipolar direct ac/ac converter is combined to the bidirectional phase-shifted full-bridge converter (PSHB), which inherits the advantages of no commutation problem, zero voltage switching (ZVS), simple control, bipolar output voltage gains, et al. The operating principles of this converter and the design considerations for the key parameters are given in detail. Moreover, the application in voltage sag/swell compensation is simply analyzed. Thanks to the high-frequency isolation capability, it satisfies needs of distribution networks in terms of sensitive loads protection, voltage resilience control without applying the bulky line frequency transformers. Finally, the feasibility of this proposed topology is verified by the various experimental results of the prototype.


  • Phase-Shift Full-Bridge (PSFB) Converter Integrated Double-Inductor Rectifier With Separated Resonant Circuits (SRCs) for 800-V High-Power Electric Vehicles

    by Zhongchen Pei, Dongbo Guo, Tiancheng Cui, Chuang Liu, Dehao Kong, Di Zhu, Yu Jiang, Nan Chen

    The main battery voltage of electric vehicles (EVs) has been suggested to increase to an 800-V system, which improves driving distance and charging speed. However, the design of an 800 V DC/DC converter is challenging because of the high voltage and current stress of the switching devices. Therefore, this paper proposes a novel double-inductor rectifier with separated resonant circuits (SRC) based on a phase-shift full-bridge (PSFB) converter for 800 V on-board charger (OBC) applications, which overcomes the drawbacks of the frequency stress of the diodes in a single series resonant circuit (SSRC). Moreover, the configuration of input-series output-parallel (ISOP) improves the voltage safety margin, and the use of 650 V switching devices reduces the system cost. In addition, the SRC achieves more effective energy transfer, which greatly reduces the switching loss and the thermal effects of high-power transmission by achieving a wide range of zero-voltage switching (ZVS) in the leading-leg switches and zero-current switching (ZCS) in the lagging-leg switches. Finally, the effectiveness of the proposed converter is validated on a 760 V/20 kW experimental prototype with 98.3% maximum efficiency.


  • Hybrid Isolated Modular Multilevel Converter Based Solid-State Transformer Topology With Simplified Power Conversion Process and Uneven Voltage Ratio

    by Zhongchen Pei, Dehao Kong, Chao Liu, Chuang Liu, Dongbo Guo, Di Zhu, Yuanxiang Sun, Marcelo Lobo Heldwein

    This article proposes a novel triple-port solid-state transformer (SST) topology based on a hybrid isolated modular multilevel converter (MMC), which overcomes the limitation of voltage ratio R (pu) in the conventional MMC-based SST. By integrating a high-frequency link into the MMC structure and applying various types of isolated submodule (ISM), the proposed SST can function as a step-down rectifier, where U MVDC < U MVAC(p-p) . In this case, the power electronics converters used to connect downstream medium-voltage direct current (MVdc) link and distributed energy resources or battery storage require fewer active devices and may minimize the cost of protection equipment. In addition, the proposed SST retains the significant advantages of single-stage SSTs, such as single-stage power conversion, saving capacitor, and a simple control system. First, the topology and modulation strategy of two types of ISMs are discussed. In addition, this article provides a detailed analysis of operation principles, power flow, grid-tied control, and system reliability. Moreover, the proposed converter is compared with other SST topologies in terms of key performance indicators, such as peak efficiency, system volume, and number of active semiconductor devices. Finally, a 300-V/20-kW scaled-down prototype is developed, and the experimental results demonstrate the performance and verify the correctness of the proposed converter.


  • Direct AC-AC Converter Based on Odd Symmetrical No-Differential AC Chopper Legs With Unipolar Modulation Strategy

    by Dongbo Guo, Tianpeng Du, Chuang Liu, Pinjia Zhang, Zhongchen Pei, Guanyu Yan, Guowei Cai, Yibo Wang, Rutian Wang

    This article proposes a single-phase bipolar pulsewidth modulation direct ac–ac converter with unipolar modulation strategy. The converter is composed of two odd symmetrical two-level no-differential ac chopper legs, which can work in noninverting and inverting modes for the utility voltage sag or swell compensation. The number switches working at high frequency in each operating mode are minimized thanks to the proposed unipolar modulation strategy, so the total switching losses can be effectively reduced in theory, and the efficiency of the converter is improved. In addition, capacitor symmetry can be realized in the positive and negative half cycle of the input voltage, and the converter has no commutation problems. Finally, on the basis of theoretical analysis, the experimental results under different working conditions are also provided to verify the correctness of the theoretical analysis and the superiority of the proposed topology and modulation strategy.


  • AC Voltage Synthesis Using Arbitrary Two-Phase Voltages: Frequency, Phase, and Amplitude Modulation for Direct AC–AC Power Conversion

    by Bingda Zhu, Chuang Liu, Dongbo Guo, Lingguo Kong, Guowei Cai, Heyang Sun, Xinming Shao

    Usually, the dc-link is employed as the intermediate stage of ac–ac power conversion for high controllability, good output quality, and stability, while the large-volume dc capacitors will lead to high equipment failure rate and maintenance cost. This article proposes an arbitrary two-phase input voltages based ac voltage synthesis method for direct ac–ac power conversion, which can realize the three-phase output voltages with controllable frequency, amplitude, and phase. Besides, the current harmonics generated by the proposed voltage synthesis method can be eliminated naturally through the phases’ cross-coupling. This feature avoids the harmonic pollution to the input currents. The corresponding modulation strategy for ac voltage synthesis is derived and analyzed in detail. Finally, a 3-kW experimental prototype is constructed. The results are consistent with the theoretical analysis.