Ashwani Kumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ashwani Kumar has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Atma Ram Gupta
Department of Electrical Engineering, Government Engineering College Kaimur, Bihar Engineering University, Department of Science Technology and Technical Education, Patna, India
11 shared publications - Nitin Kumar Saxena
University of Denver
10 shared publications - Bharat Singh
National Institute of Technology
7 shared publications - Saurabh Chanana
National Institute of Technology
6 shared publications - David Wenzhong Gao
Department of Electrical and Computer Engineering, University of Denver, Denver, CO, USA
5 shared publications - Veera Venkata Satya Narayana Murty
National Institute of Technology Kurukshetra
5 shared publications
Latest Publications
- 20 April 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (9)
DG Deployment through RAO Algorithm Amidst COVID Pandemic Load
The electrical distribution system, with its radial structure and passive nature, is prone to high power losses due to imbalanced load demand and inadequate reactive power, resulting in a poor voltage profile. This paper presents a novel metaphor-less RAO algorithm for the optimal sizing and location of Distributed Generation to achieve optimal penetration levels. This study introduces new location and size deviation indices to assess the impact of DG installation. The proposed methodology employs a multi-objective function that minimizes active and reactive power losses and maximizes the minimum voltage, using a weighted-sum approach. The method is applied to the IEEE-33 bus radial distribution system with various load models, including residential, commercial, industrial, and electric-vehicle battery-charging loads, as well as combinations of these models. The simulation results across various scenarios demonstrate the efficiency of the proposed algorithm at different DG penetration levels and for different load types and demand profiles. On the IEEE-33 bus, power losses were reduced to 48.70%, 64.56%, and 69.07% after DG allocation with unity, fixed, and optimal power factors, respectively, under the constant-load model. Additionally, the presented work determines the optimal range of power factor-based DG penetration for distinct load models and the role of DG allocation in the electrical distribution system during the critical emergency conditions of the COVID-19 pandemic.
- 20 April 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (9)
DG Deployment through RAO Algorithm Amidst COVID Pandemic Load
The electrical distribution system, with its radial structure and passive nature, is prone to high power losses due to imbalanced load demand and inadequate reactive power, resulting in a poor voltage profile. This paper presents a novel metaphor-less RAO algorithm for the optimal sizing and location of Distributed Generation to achieve optimal penetration levels. This study introduces new location and size deviation indices to assess the impact of DG installation. The proposed methodology employs a multi-objective function that minimizes active and reactive power losses and maximizes the minimum voltage, using a weighted-sum approach. The method is applied to the IEEE-33 bus radial distribution system with various load models, including residential, commercial, industrial, and electric-vehicle battery-charging loads, as well as combinations of these models. The simulation results across various scenarios demonstrate the efficiency of the proposed algorithm at different DG penetration levels and for different load types and demand profiles. On the IEEE-33 bus, power losses were reduced to 48.70%, 64.56%, and 69.07% after DG allocation with unity, fixed, and optimal power factors, respectively, under the constant-load model. Additionally, the presented work determines the optimal range of power factor-based DG penetration for distinct load models and the role of DG allocation in the electrical distribution system during the critical emergency conditions of the COVID-19 pandemic.
- 13 January 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (3)
Techno-economic Analysis with UPQC in Mesh Distribution Networks with Optimal Allocations of Renewable-Based DGs
The electrical distribution network needs to be reconfigured more carefully due to steadily rising power demand and increased greenhouse gas emissions, necessitating the deployment of renewable-based distributed energy resources. Reconfiguring raises several concerns, including increased line losses, voltage variation, and other power quality issues. To address these problems, D-FACTS devices play a critical role in the era of modern electronic devices. This work tackles the issues discussed above and expands on the main studies. (i) The analysis of mesh distribution network with reconfiguration; (ii) Allocation of DGs, such as solar and wind, optimally to benefit the environment; (iii) Deployment of UPQC within the renewable-integrated mesh distribution network; and (iv) techno-economic analysis for various load models will be conducted for each objective. The authors analysed the IEEE-33 and 69-bus mesh distribution networks to evaluate the feasibility of these goals. According to the findings, the combination of DG1+DG2, UPQC, and network reconfiguration considerably improves the overall voltage profile by 85% and 76.33%, real power losses by 79.5% and 92.8%, and reactive power losses by 68% and 88% compared with the basic scenario of IEEE-33 and 69-bus mesh distribution networks, respectively.
- 13 January 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (3)
Techno-economic Analysis with UPQC in Mesh Distribution Networks with Optimal Allocations of Renewable-Based DGs
The electrical distribution network needs to be reconfigured more carefully due to steadily rising power demand and increased greenhouse gas emissions, necessitating the deployment of renewable-based distributed energy resources. Reconfiguring raises several concerns, including increased line losses, voltage variation, and other power quality issues. To address these problems, D-FACTS devices play a critical role in the era of modern electronic devices. This work tackles the issues discussed above and expands on the main studies. (i) The analysis of mesh distribution network with reconfiguration; (ii) Allocation of DGs, such as solar and wind, optimally to benefit the environment; (iii) Deployment of UPQC within the renewable-integrated mesh distribution network; and (iv) techno-economic analysis for various load models will be conducted for each objective. The authors analysed the IEEE-33 and 69-bus mesh distribution networks to evaluate the feasibility of these goals. According to the findings, the combination of DG1+DG2, UPQC, and network reconfiguration considerably improves the overall voltage profile by 85% and 76.33%, real power losses by 79.5% and 92.8%, and reactive power losses by 68% and 88% compared with the basic scenario of IEEE-33 and 69-bus mesh distribution networks, respectively.
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1)
Self‐Sustaining Reactive Power Scheme for Enhancing Electric Vehicle Charging Station Capacity
The rising demand for electric vehicle (EV) charging poses a strain on the grid’s capabilities. Reactive power compensation, defined as a voltage control ancillary service, aids in managing reactive power near the end user. To promote wider adoption of EVs, this paper suggests enhancing charging capabilities by strategically planning public charging stations with a self‐sustainable reactive power compensation scheme. This scheme facilitates the management of real power flow between the grid and the EV charging stations (EVCSs), as well as reactive power flow between the EVCS and the reactive power compensators. The proposed work focuses on a 180 kW EVCS located in the Denver Aurora region of Colorado, USA. This work offers a practical demonstration of the proposed solution, showcasing how the charging station can accommodate more EVs while maintaining the same total power demand from the grid. This paper aims to promote EV adoption by enhancing charging capabilities through the implementation of public charging stations equipped with a self‐sustainable reactive power compensation scheme. The implementation of a distributed static synchronous compensator (DSTATCOM) is highlighted as a crucial element in enhancing reactive power compensation, especially given the unpredictable on–off patterns of multiple EVs at charging stations. The proposed model is verified for real and reactive power management during different weekday and weekend load conditions. The proposed approach verifies the enhancement of charging capacity due to the self‐sustaining reactive power scheme at EVCS. Subsequently, it is also tested for a hybrid combination of fixed capacitor (FC) and DSTATCOM to enhance the economic viability of the system. By optimizing the charging process, this work concludes that the existing power grid can accommodate the growing number of EVs without significant disruptions.
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1)
Open AccessSelf‐Sustaining Reactive Power Scheme for Enhancing Electric Vehicle Charging Station Capacity
The rising demand for electric vehicle (EV) charging poses a strain on the grid’s capabilities. Reactive power compensation, defined as a voltage control ancillary service, aids in managing reactive power near the end user. To promote wider adoption of EVs, this paper suggests enhancing charging capabilities by strategically planning public charging stations with a self‐sustainable reactive power compensation scheme. This scheme facilitates the management of real power flow between the grid and the EV charging stations (EVCSs), as well as reactive power flow between the EVCS and the reactive power compensators. The proposed work focuses on a 180 kW EVCS located in the Denver Aurora region of Colorado, USA. This work offers a practical demonstration of the proposed solution, showcasing how the charging station can accommodate more EVs while maintaining the same total power demand from the grid. This paper aims to promote EV adoption by enhancing charging capabilities through the implementation of public charging stations equipped with a self‐sustainable reactive power compensation scheme. The implementation of a distributed static synchronous compensator (DSTATCOM) is highlighted as a crucial element in enhancing reactive power compensation, especially given the unpredictable on–off patterns of multiple EVs at charging stations. The proposed model is verified for real and reactive power management during different weekday and weekend load conditions. The proposed approach verifies the enhancement of charging capacity due to the self‐sustaining reactive power scheme at EVCS. Subsequently, it is also tested for a hybrid combination of fixed capacitor (FC) and DSTATCOM to enhance the economic viability of the system. By optimizing the charging process, this work concludes that the existing power grid can accommodate the growing number of EVs without significant disruptions.
- 1 April 2025
- Published by Springer Nature
- p. 721-734
Optimal Sizing and Location of Hybrid Solar-Wind Based DG and Minimization of Cost for Sustainable Energy
- 1 April 2025
- Published by Springer Nature
- p. 721-734
Optimal Sizing and Location of Hybrid Solar-Wind Based DG and Minimization of Cost for Sustainable Energy
- 23 March 2025
- Published by Springer Nature
- p. 393-403
Optimizing D-STATCOM Performance for EVCS: A Unified Approach with Genetic Algorithm-Tuned Current Controller and Filter Design
- 23 March 2025
- Published by Springer Nature
- p. 393-403
Optimizing D-STATCOM Performance for EVCS: A Unified Approach with Genetic Algorithm-Tuned Current Controller and Filter Design
- 23 March 2025
- Published by Springer Nature
- p. 323-337
Impact of UPQC in Renewable Integrated Distribution Network on VSM Enhancement and Energy Savings
- 23 March 2025
- Published by Springer Nature
- p. 323-337
Impact of UPQC in Renewable Integrated Distribution Network on VSM Enhancement and Energy Savings
- 2 January 2025
- Published by Walter de Gruyter GmbH in International Journal of Emerging Electric Power Systems
- Vol. 26 (5) , 879-903
Optimal allocation of hybrid renewable energy sources using progressive L-index method for voltage stability margin enhancement and impact of storage devices
Distribution system networks (DSN) are presently gaining more concern in terms of security and stability due to the penetration of distributed energy resources (DERs) and the integration of microgrids. The active DSNs may have their operating point near the maximum power transfer capability due to the optimal asset utilization, which jeopardizes the stability of the network. The article presents a novel approach for optimizing the placement of solar PV, D-STATCOMs and energy storage in distribution networks. The method minimizes the L-Index for voltage stability, reduces voltage deviations, and lowers annual operating costs, ensuring enhanced performance and cost-efficiency for modern power systems. The article presents a novel approach of progressive L-Index to determine the suitable sites for optimal location of the DERs using Particle Swarm Optimization (PSO). It also utilizes the mixed-integer nonlinear programming using GAMS to compute the appropriate size of DERs, D-STATCOM and the energy storage. The studies have been performed on the standard IEEE-69 bus test DSN. The results exhibit that the proposed scheme enhances the overall voltage profile of the DSN, and the VSM is upgraded by 41.60 % with DER installation, as compared without DG.
- 2 January 2025
- Published by Walter de Gruyter GmbH in International Journal of Emerging Electric Power Systems
- Vol. 26 (5) , 879-903
Optimal allocation of hybrid renewable energy sources using progressive L-index method for voltage stability margin enhancement and impact of storage devices
Distribution system networks (DSN) are presently gaining more concern in terms of security and stability due to the penetration of distributed energy resources (DERs) and the integration of microgrids. The active DSNs may have their operating point near the maximum power transfer capability due to the optimal asset utilization, which jeopardizes the stability of the network. The article presents a novel approach for optimizing the placement of solar PV, D-STATCOMs and energy storage in distribution networks. The method minimizes the L-Index for voltage stability, reduces voltage deviations, and lowers annual operating costs, ensuring enhanced performance and cost-efficiency for modern power systems. The article presents a novel approach of progressive L-Index to determine the suitable sites for optimal location of the DERs using Particle Swarm Optimization (PSO). It also utilizes the mixed-integer nonlinear programming using GAMS to compute the appropriate size of DERs, D-STATCOM and the energy storage. The studies have been performed on the standard IEEE-69 bus test DSN. The results exhibit that the proposed scheme enhances the overall voltage profile of the DSN, and the VSM is upgraded by 41.60 % with DER installation, as compared without DG.
- 15 December 2024
- Published by Springer Nature
- p. 249-261
Voltage Stability Margin Enhancement with Optimal DG and D-STATCOM Allocation in Radial Distribution System
- 15 December 2024
- Published by Springer Nature
- p. 249-261
Voltage Stability Margin Enhancement with Optimal DG and D-STATCOM Allocation in Radial Distribution System
- 11 July 2024
- Published by Springer Nature
- p. 19-34
Analysis of Distribution System Considering Load Models and Impact of Capacitor Minimizing Cost Using GAMS
- 11 July 2024
- Published by Springer Nature
- p. 19-34
Analysis of Distribution System Considering Load Models and Impact of Capacitor Minimizing Cost Using GAMS