Petru Dobra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Petru Dobra has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Dorin Petreus
Applied Electronics Department, Faculty of Electronics, Telecommunications and Information Technology, Technical University of Cluj-Napoca, 400114 Cluj-Napoca, Romania
13 shared publications - Mircea Şuşcă
Automation department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
13 shared publications - Vlad Mihaly
Automation department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
13 shared publications M. Trusca
Automatic Control Department, Technical University of Cluj–Napoca, Romania
8 shared publicationsMirela Trusca
Electrical Measurements Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
8 shared publicationsLiviu Tomesc
Automatic Control Department, Technical University of Cluj-Napoca, Romania
7 shared publications
Latest Publications
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 12 (10) , 2026-2039
Fixed-Structure Robust Feedback Linearization for Full Relative Degree Nonlinear Systems
The exact feedback linearization method implies an accurate knowledge of the model and its parameters. This assumption is an inherent limitation of the method, suffering from robustness issues. In general, the model structure is only partially known and its parameters present uncertainties. The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriately-designed robust control layer. This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction. We consider the case of full relative degree input-affine nonlinear systems, which are of great practical importance in the literature. The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties. The constructive proofs provide exact representations of the uncertainty models in three considered scenarios: unmatched, fully-matched, and partially-matched uncertainties. The uncertainty model will be a descriptor system, which also represents one of the novelties of the paper. Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alter-natives. The end-to-end procedure is emphasized on an illustrative example, in two different hypotheses.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 12 (10) , 2026-2039
Fixed-Structure Robust Feedback Linearization for Full Relative Degree Nonlinear Systems
The exact feedback linearization method implies an accurate knowledge of the model and its parameters. This assumption is an inherent limitation of the method, suffering from robustness issues. In general, the model structure is only partially known and its parameters present uncertainties. The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriately-designed robust control layer. This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction. We consider the case of full relative degree input-affine nonlinear systems, which are of great practical importance in the literature. The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties. The constructive proofs provide exact representations of the uncertainty models in three considered scenarios: unmatched, fully-matched, and partially-matched uncertainties. The uncertainty model will be a descriptor system, which also represents one of the novelties of the paper. Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alter-natives. The end-to-end procedure is emphasized on an illustrative example, in two different hypotheses.
- Open Access
- 24 June 2025
- Published by MDPI AG in Algorithms
- Vol. 18 (7) , 382
Time Management in Wireless Sensor Networks for Industrial Process Control
This paper addresses the critical challenge of time management in wireless sensor networks (WSNs) applied to industrial process control. Although wireless technologies have gained ground in industrial monitoring, their adoption in control applications remains limited due to concerns around reliability and timing accuracy. This study proposes a practical, low-cost solution based on commercial off-the-shelf (COTS) components, leveraging the IEEE 802.15.4-2020 standard in Time-Slotted Channel-Hopping (TSCH) mode. A custom time management algorithm is developed and implemented on STM32 microcontrollers paired with AT86RF212B transceivers. The proposed system ensures a sub-millisecond synchronization drift across nodes by dividing communication into a structured slot frame and implementing precise scheduling and enhanced beacon-based synchronization. Validation is performed through experimental setups monitored with logic analyzers, demonstrating a time drift consistently below 600 microseconds. The results confirm the feasibility of using synchronized wireless nodes for real-time industrial control tasks, suggesting that further improvements in hardware precision could enable even tighter synchronization and broader applicability in fast and critical processes.
- 24 June 2025
- Published by MDPI AG in Algorithms
- Vol. 18 (7) , 382
Open AccessTime Management in Wireless Sensor Networks for Industrial Process Control
This paper addresses the critical challenge of time management in wireless sensor networks (WSNs) applied to industrial process control. Although wireless technologies have gained ground in industrial monitoring, their adoption in control applications remains limited due to concerns around reliability and timing accuracy. This study proposes a practical, low-cost solution based on commercial off-the-shelf (COTS) components, leveraging the IEEE 802.15.4-2020 standard in Time-Slotted Channel-Hopping (TSCH) mode. A custom time management algorithm is developed and implemented on STM32 microcontrollers paired with AT86RF212B transceivers. The proposed system ensures a sub-millisecond synchronization drift across nodes by dividing communication into a structured slot frame and implementing precise scheduling and enhanced beacon-based synchronization. Validation is performed through experimental setups monitored with logic analyzers, demonstrating a time drift consistently below 600 microseconds. The results confirm the feasibility of using synchronized wireless nodes for real-time industrial control tasks, suggesting that further improvements in hardware precision could enable even tighter synchronization and broader applicability in fast and critical processes.
- Open Access
- 15 May 2025
- Published by MDPI AG in Preprints.org
Time Management in Wireless Sensor Networks for Industrial Process Control
This paper addresses the critical challenge of time management in wireless sensor networks (WSNs) applied to industrial process control. Although wireless technologies have gained ground in industrial monitoring, their adoption in control applications remains limited due to concerns around reliability and timing accuracy. The study proposes a practical, low-cost solution based on commercial off-the-shelf (COTS) components, leveraging the IEEE 802.15.4-2020 standard in Time Slotted Channel Hopping (TSCH) mode. A custom time management algorithm is developed and implemented on STM32 microcontrollers paired with AT86RF212B transceivers. The proposed system ensures sub-millisecond synchronization drift across nodes by dividing communication into a structured slot frame and implementing precise scheduling and enhanced beacon-based synchronization. Validation is performed through experimental setups monitored with logic analyzers, demonstrating time drift consistently below 600 microseconds. The results confirm the feasibility of using synchronized wireless nodes for real-time industrial control tasks, suggesting that further improvements in hardware precision could enable even tighter synchronization and broader applicability in fast and critical processes.
- 15 May 2025
- Published by MDPI AG in Preprints.org
Open AccessTime Management in Wireless Sensor Networks for Industrial Process Control
This paper addresses the critical challenge of time management in wireless sensor networks (WSNs) applied to industrial process control. Although wireless technologies have gained ground in industrial monitoring, their adoption in control applications remains limited due to concerns around reliability and timing accuracy. The study proposes a practical, low-cost solution based on commercial off-the-shelf (COTS) components, leveraging the IEEE 802.15.4-2020 standard in Time Slotted Channel Hopping (TSCH) mode. A custom time management algorithm is developed and implemented on STM32 microcontrollers paired with AT86RF212B transceivers. The proposed system ensures sub-millisecond synchronization drift across nodes by dividing communication into a structured slot frame and implementing precise scheduling and enhanced beacon-based synchronization. Validation is performed through experimental setups monitored with logic analyzers, demonstrating time drift consistently below 600 microseconds. The results confirm the feasibility of using synchronized wireless nodes for real-time industrial control tasks, suggesting that further improvements in hardware precision could enable even tighter synchronization and broader applicability in fast and critical processes.
- Open Access
- 11 February 2025
- Published by MDPI AG in Preprints.org
Extending IEEE 802.15.4 for Wireless Process Control
This paper explores the extension of the IEEE 802.15.4 standard for wireless process control, focusing on its application in industrial environments where secure and efficient data transfer is critical. The study addresses the limitations of existing industrial wireless protocols like ISA100 Wireless and Wireless HART, particularly their inability to fully support wireless control loops. A new approach is proposed, integrating state-of-the-art microcontrollers and transceivers to design a robust wireless control network (WCN) that ensures low latency and interference resistance. Key developments include the design and production of a custom development board, comparative analyses of hardware and software components, and the implementation of the TSCH (Time Slotted Channel Hopping) operating mode. The paper validates the solution through simulations and practical experiments, demonstrating its capability to maintain stable control loops in challenging industrial settings. Results indicate that the proposed network meets stringent industrial requirements, paving the way for broader adoption of wireless technologies in process control. This work highlights the feasibility of overcoming existing barriers to wireless control in industrial applications, contributing to the development of cost-effective and reliable systems.
- 11 February 2025
- Published by MDPI AG in Preprints.org
Open AccessExtending IEEE 802.15.4 for Wireless Process Control
This paper explores the extension of the IEEE 802.15.4 standard for wireless process control, focusing on its application in industrial environments where secure and efficient data transfer is critical. The study addresses the limitations of existing industrial wireless protocols like ISA100 Wireless and Wireless HART, particularly their inability to fully support wireless control loops. A new approach is proposed, integrating state-of-the-art microcontrollers and transceivers to design a robust wireless control network (WCN) that ensures low latency and interference resistance. Key developments include the design and production of a custom development board, comparative analyses of hardware and software components, and the implementation of the TSCH (Time Slotted Channel Hopping) operating mode. The paper validates the solution through simulations and practical experiments, demonstrating its capability to maintain stable control loops in challenging industrial settings. Results indicate that the proposed network meets stringent industrial requirements, paving the way for broader adoption of wireless technologies in process control. This work highlights the feasibility of overcoming existing barriers to wireless control in industrial applications, contributing to the development of cost-effective and reliable systems.
- 14 July 2024
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 361 (14)
Robust numeric implementation of the fractional-order element
- 14 July 2024
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 361 (14)
Robust numeric implementation of the fractional-order element
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5670-5675
Maximizing the Exponential Decay Rate for Finite Dimensional Bilinear Systems using Passivity-Based Controllers
Passivity-based controllers which ensure the asymptotic stability of the closed-loop system can be developed with the aid of the Krasovskii passivity notion. However, there are no available design procedures to impose a set of performances. The main focus of the current paper is to formulate an optimization problem whose solution provides the parameters of a Krasovskii passivity-based controller (K-PBC) which ensures local exponential stability with a maximized lower bound of the decay rate. After a convexification procedure we obtain a linear programming problem with linear matrix inequality constraints. The numerical example underlines the advantage of the proposed method by emphasizing the differ-ence between an optimized and a default controller obtained without optimization.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5670-5675
Maximizing the Exponential Decay Rate for Finite Dimensional Bilinear Systems using Passivity-Based Controllers
Passivity-based controllers which ensure the asymptotic stability of the closed-loop system can be developed with the aid of the Krasovskii passivity notion. However, there are no available design procedures to impose a set of performances. The main focus of the current paper is to formulate an optimization problem whose solution provides the parameters of a Krasovskii passivity-based controller (K-PBC) which ensures local exponential stability with a maximized lower bound of the decay rate. After a convexification procedure we obtain a linear programming problem with linear matrix inequality constraints. The numerical example underlines the advantage of the proposed method by emphasizing the differ-ence between an optimized and a default controller obtained without optimization.
- 13 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Low-Order Representation of Robust Fractional-Order Controllers for Fractional-Order Interval Plants
The fractional-order (FO) element has been recently integrated into the generalized Robust Control Framework using the Oustaloup method. As such, the parametric uncertainties from fractional-order interval plants can now be treated using the structured singular value framework. Moreover, the resulting infinite impulse response approximation manages to satisfy the robust stability and the robust performance criteria according to the given uncertainty block. However, the recommended approximation order for each fractional-order element is equal to the number of decades of the frequency range where the approximation is valid, which can lead to a high-order controller representation. The aim of this paper is to present two methods for the order reduction without losing the robustness properties, followed by an optimization problem whose solution is a low-order approximation of a fractional-order controller which maintains the robust stability and robust performance as well. A finite commensurate order interval plant has been used as a numerical example to illustrate the effectiveness of the proposed method.
- 13 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Low-Order Representation of Robust Fractional-Order Controllers for Fractional-Order Interval Plants
The fractional-order (FO) element has been recently integrated into the generalized Robust Control Framework using the Oustaloup method. As such, the parametric uncertainties from fractional-order interval plants can now be treated using the structured singular value framework. Moreover, the resulting infinite impulse response approximation manages to satisfy the robust stability and the robust performance criteria according to the given uncertainty block. However, the recommended approximation order for each fractional-order element is equal to the number of decades of the frequency range where the approximation is valid, which can lead to a high-order controller representation. The aim of this paper is to present two methods for the order reduction without losing the robustness properties, followed by an optimization problem whose solution is a low-order approximation of a fractional-order controller which maintains the robust stability and robust performance as well. A finite commensurate order interval plant has been used as a numerical example to illustrate the effectiveness of the proposed method.
- Open Access
- 7 March 2023
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (8) , 1073-1087
Sampling rate selection for multi‐loop cascade control systems in an optimal manner
This article proposes an optimization‐based approach to selecting the sampling periods for classes of linear time‐invariant (LTI) regulators in a cascaded multi‐rate control structure, to account for practical implementation on numeric systems. Starting from the Shannon‐Nyquist sampling theorem, which proposes the minimum required sampling frequency for completely recovering the original analog signal from its discrete samples, the scope of the sampling process, viewed from a control perspective, is to ensure asymptotic stability of the closed‐loop system, with the smallest possible degradation of the initially‐proposed performance indices as possible according to a set of well‐picked criteria. As such, a configurable optimization‐based approach is proposed, solved with the mixed‐integer artificial bee colony (MI‐ABC) algorithm, for selecting the sampling periods by specifying the emphasis between closed‐loop fidelity and ease of implementation, with an intuitive visualization method. The proposed solution is illustrated on two case studies, with emphasis on the construction of the proposed functionals and their practical implications.
- 7 March 2023
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (8) , 1073-1087
Open AccessSampling rate selection for multi‐loop cascade control systems in an optimal manner
This article proposes an optimization‐based approach to selecting the sampling periods for classes of linear time‐invariant (LTI) regulators in a cascaded multi‐rate control structure, to account for practical implementation on numeric systems. Starting from the Shannon‐Nyquist sampling theorem, which proposes the minimum required sampling frequency for completely recovering the original analog signal from its discrete samples, the scope of the sampling process, viewed from a control perspective, is to ensure asymptotic stability of the closed‐loop system, with the smallest possible degradation of the initially‐proposed performance indices as possible according to a set of well‐picked criteria. As such, a configurable optimization‐based approach is proposed, solved with the mixed‐integer artificial bee colony (MI‐ABC) algorithm, for selecting the sampling periods by specifying the emphasis between closed‐loop fidelity and ease of implementation, with an intuitive visualization method. The proposed solution is illustrated on two case studies, with emphasis on the construction of the proposed functionals and their practical implications.