Mircea Şuşcă
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mircea Şuşcă has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Vlad Mihaly
Automation department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
21 shared publications - Petru Dobra
Technical University of Cluj-Napoca, Romania
13 shared publications Petru Dobra
Technical University of Cluj-Napoca,Automation Department,Str. G. Baritiu nr. 26–28, Cluj-Napoca,Romania,400027
6 shared publications- Dora Morar
Department of Automation, Technical University of Cluj-Napoca, Str. G. Baritiu nr. 26-28, 400027 Cluj-Napoca, Romania
5 shared publications - Irinel-Constantin Morărescu
Automation department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
4 shared publications Mihai Stanese
Technical University of Cluj-Napoca,Automation Department,Str. G. Baritiu nr. 26–28, Cluj-Napoca,Romania,400027
3 shared publications
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 1183-1188
Performance-Aware Quantizer Synthesis for LQI Tracking Subject to Fixed Level Budgets
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 1183-1188
Performance-Aware Quantizer Synthesis for LQI Tracking Subject to Fixed Level Budgets
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 12 (10) , 2026-2039
Fixed-Structure Robust Feedback Linearization for Full Relative Degree Nonlinear Systems
The exact feedback linearization method implies an accurate knowledge of the model and its parameters. This assumption is an inherent limitation of the method, suffering from robustness issues. In general, the model structure is only partially known and its parameters present uncertainties. The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriately-designed robust control layer. This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction. We consider the case of full relative degree input-affine nonlinear systems, which are of great practical importance in the literature. The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties. The constructive proofs provide exact representations of the uncertainty models in three considered scenarios: unmatched, fully-matched, and partially-matched uncertainties. The uncertainty model will be a descriptor system, which also represents one of the novelties of the paper. Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alter-natives. The end-to-end procedure is emphasized on an illustrative example, in two different hypotheses.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 12 (10) , 2026-2039
Fixed-Structure Robust Feedback Linearization for Full Relative Degree Nonlinear Systems
The exact feedback linearization method implies an accurate knowledge of the model and its parameters. This assumption is an inherent limitation of the method, suffering from robustness issues. In general, the model structure is only partially known and its parameters present uncertainties. The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriately-designed robust control layer. This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction. We consider the case of full relative degree input-affine nonlinear systems, which are of great practical importance in the literature. The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties. The constructive proofs provide exact representations of the uncertainty models in three considered scenarios: unmatched, fully-matched, and partially-matched uncertainties. The uncertainty model will be a descriptor system, which also represents one of the novelties of the paper. Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alter-natives. The end-to-end procedure is emphasized on an illustrative example, in two different hypotheses.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 9, 739-744
A Passivity Analysis Tool for Linear Clustered Multi-Agent Systems
Passivity of a large-scale interconnected system is often broken down to the passivity of the individual subsystems that compose it. Nevertheless, there are cases in which the individual elements are not all passive, yet the overall large-scale system is. In such scenarios, we need to directly solve very large problems to conclude on the passivity. This letter proposes a methodology to analyze passivity based on the topology of the multi-agent system. In many cases, large multi-agent systems are formed by interconnected clusters, which are groups of agents densely interconnected. The clusters are sparsely interconnected with each other and this leads to a time scale-separation with a fast dynamics inside the clusters and a slow one between them. The purpose of this letter is twofold. First, we exploit the time-scale separation property inherent to such a system to provide a computationally efficient alternative to analyze its passivity. Second, we provide insight into how robust its passivity is with respect to the inter-and intra-cluster agent interactions. To achieve this, we consider the singular perturbation framework with respect to the ratio of the strength of the controls between and within the clusters, and rely on the connection between positive realness, passivity, and multi-input multi-output system phase. We consider agents with identical linear time-invariant dynamics. The method is illustrated on a numerical example.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 9, 739-744
A Passivity Analysis Tool for Linear Clustered Multi-Agent Systems
Passivity of a large-scale interconnected system is often broken down to the passivity of the individual subsystems that compose it. Nevertheless, there are cases in which the individual elements are not all passive, yet the overall large-scale system is. In such scenarios, we need to directly solve very large problems to conclude on the passivity. This letter proposes a methodology to analyze passivity based on the topology of the multi-agent system. In many cases, large multi-agent systems are formed by interconnected clusters, which are groups of agents densely interconnected. The clusters are sparsely interconnected with each other and this leads to a time scale-separation with a fast dynamics inside the clusters and a slow one between them. The purpose of this letter is twofold. First, we exploit the time-scale separation property inherent to such a system to provide a computationally efficient alternative to analyze its passivity. Second, we provide insight into how robust its passivity is with respect to the inter-and intra-cluster agent interactions. To achieve this, we consider the singular perturbation framework with respect to the ratio of the strength of the controls between and within the clusters, and rely on the connection between positive realness, passivity, and multi-input multi-output system phase. We consider agents with identical linear time-invariant dynamics. The method is illustrated on a numerical example.
- 14 July 2024
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 361 (14)
Robust numeric implementation of the fractional-order element
- 14 July 2024
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 361 (14)
Robust numeric implementation of the fractional-order element
- 22 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 2105-2110
Passivity of Linear Singularly Perturbed Systems
The passivity of singularly perturbed systems (SPSs) is generally studied without taking advantage of the time-scale separation present in this class of systems. To fill this gap, the objective of this letter is to provide easy-to-verify well-posed conditions characterizing the passivity of a perturbation variable-dependent SPS starting from the passivity of its associated reduced-order system. To achieve this goal, we rely on the connection between positive realness and passivity, as well as the notion of phase for multi-input multi-output (MIMO) systems. We use a benchmark DC motor to illustrate that classical reasoning used for stability analysis of SPSs, which is based on the stability of the reduced-order (slow) and boundary layer (fast) subsystems, cannot be applied to guarantee the passivity of an SPS. On top of that, our methodology explains how the time-scale separation can be used to analyze the passivity of general linear time-invariant (LTI) systems. The approach is illustrated on a numerical example.
- 22 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 2105-2110
Passivity of Linear Singularly Perturbed Systems
The passivity of singularly perturbed systems (SPSs) is generally studied without taking advantage of the time-scale separation present in this class of systems. To fill this gap, the objective of this letter is to provide easy-to-verify well-posed conditions characterizing the passivity of a perturbation variable-dependent SPS starting from the passivity of its associated reduced-order system. To achieve this goal, we rely on the connection between positive realness and passivity, as well as the notion of phase for multi-input multi-output (MIMO) systems. We use a benchmark DC motor to illustrate that classical reasoning used for stability analysis of SPSs, which is based on the stability of the reduced-order (slow) and boundary layer (fast) subsystems, cannot be applied to guarantee the passivity of an SPS. On top of that, our methodology explains how the time-scale separation can be used to analyze the passivity of general linear time-invariant (LTI) systems. The approach is illustrated on a numerical example.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5670-5675
Maximizing the Exponential Decay Rate for Finite Dimensional Bilinear Systems using Passivity-Based Controllers
Passivity-based controllers which ensure the asymptotic stability of the closed-loop system can be developed with the aid of the Krasovskii passivity notion. However, there are no available design procedures to impose a set of performances. The main focus of the current paper is to formulate an optimization problem whose solution provides the parameters of a Krasovskii passivity-based controller (K-PBC) which ensures local exponential stability with a maximized lower bound of the decay rate. After a convexification procedure we obtain a linear programming problem with linear matrix inequality constraints. The numerical example underlines the advantage of the proposed method by emphasizing the differ-ence between an optimized and a default controller obtained without optimization.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5670-5675
Maximizing the Exponential Decay Rate for Finite Dimensional Bilinear Systems using Passivity-Based Controllers
Passivity-based controllers which ensure the asymptotic stability of the closed-loop system can be developed with the aid of the Krasovskii passivity notion. However, there are no available design procedures to impose a set of performances. The main focus of the current paper is to formulate an optimization problem whose solution provides the parameters of a Krasovskii passivity-based controller (K-PBC) which ensures local exponential stability with a maximized lower bound of the decay rate. After a convexification procedure we obtain a linear programming problem with linear matrix inequality constraints. The numerical example underlines the advantage of the proposed method by emphasizing the differ-ence between an optimized and a default controller obtained without optimization.
- 13 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Low-Order Representation of Robust Fractional-Order Controllers for Fractional-Order Interval Plants
The fractional-order (FO) element has been recently integrated into the generalized Robust Control Framework using the Oustaloup method. As such, the parametric uncertainties from fractional-order interval plants can now be treated using the structured singular value framework. Moreover, the resulting infinite impulse response approximation manages to satisfy the robust stability and the robust performance criteria according to the given uncertainty block. However, the recommended approximation order for each fractional-order element is equal to the number of decades of the frequency range where the approximation is valid, which can lead to a high-order controller representation. The aim of this paper is to present two methods for the order reduction without losing the robustness properties, followed by an optimization problem whose solution is a low-order approximation of a fractional-order controller which maintains the robust stability and robust performance as well. A finite commensurate order interval plant has been used as a numerical example to illustrate the effectiveness of the proposed method.
- 13 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Low-Order Representation of Robust Fractional-Order Controllers for Fractional-Order Interval Plants
The fractional-order (FO) element has been recently integrated into the generalized Robust Control Framework using the Oustaloup method. As such, the parametric uncertainties from fractional-order interval plants can now be treated using the structured singular value framework. Moreover, the resulting infinite impulse response approximation manages to satisfy the robust stability and the robust performance criteria according to the given uncertainty block. However, the recommended approximation order for each fractional-order element is equal to the number of decades of the frequency range where the approximation is valid, which can lead to a high-order controller representation. The aim of this paper is to present two methods for the order reduction without losing the robustness properties, followed by an optimization problem whose solution is a low-order approximation of a fractional-order controller which maintains the robust stability and robust performance as well. A finite commensurate order interval plant has been used as a numerical example to illustrate the effectiveness of the proposed method.
- Open Access
- 7 March 2023
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (8) , 1073-1087
Sampling rate selection for multi‐loop cascade control systems in an optimal manner
This article proposes an optimization‐based approach to selecting the sampling periods for classes of linear time‐invariant (LTI) regulators in a cascaded multi‐rate control structure, to account for practical implementation on numeric systems. Starting from the Shannon‐Nyquist sampling theorem, which proposes the minimum required sampling frequency for completely recovering the original analog signal from its discrete samples, the scope of the sampling process, viewed from a control perspective, is to ensure asymptotic stability of the closed‐loop system, with the smallest possible degradation of the initially‐proposed performance indices as possible according to a set of well‐picked criteria. As such, a configurable optimization‐based approach is proposed, solved with the mixed‐integer artificial bee colony (MI‐ABC) algorithm, for selecting the sampling periods by specifying the emphasis between closed‐loop fidelity and ease of implementation, with an intuitive visualization method. The proposed solution is illustrated on two case studies, with emphasis on the construction of the proposed functionals and their practical implications.
- 7 March 2023
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (8) , 1073-1087
Open AccessSampling rate selection for multi‐loop cascade control systems in an optimal manner
This article proposes an optimization‐based approach to selecting the sampling periods for classes of linear time‐invariant (LTI) regulators in a cascaded multi‐rate control structure, to account for practical implementation on numeric systems. Starting from the Shannon‐Nyquist sampling theorem, which proposes the minimum required sampling frequency for completely recovering the original analog signal from its discrete samples, the scope of the sampling process, viewed from a control perspective, is to ensure asymptotic stability of the closed‐loop system, with the smallest possible degradation of the initially‐proposed performance indices as possible according to a set of well‐picked criteria. As such, a configurable optimization‐based approach is proposed, solved with the mixed‐integer artificial bee colony (MI‐ABC) algorithm, for selecting the sampling periods by specifying the emphasis between closed‐loop fidelity and ease of implementation, with an intuitive visualization method. The proposed solution is illustrated on two case studies, with emphasis on the construction of the proposed functionals and their practical implications.