Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Takeshi Yabutsuka has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fabrication of Bioactive, 3D-Printed, Porous, Yttria-Stabilized Zirconia via Mg/Zn-Incorporated Modified Simulated Body Fluid Pretreatment

    by Yuwei Wu, Shigeomi Takai, Takeshi Yabutsuka

    Yttria-stabilized zirconia (YSZ) has attracted attention as a ceramic implant material owing to its excellent mechanical strength, biocompatibility, and aesthetic properties. However, YSZ is bioinert and lacks the ability to directly bond with bone. This study aims to enhance the bioactivity of 3D-printed porous YSZ through modified simulated body fluid (m-SBF) pretreatments. The porous YSZ substrates fabricated by fused deposition modeling were first etched with hydrofluoric acid (HF) to increase the surface roughness, followed by immersion in CO32−, Mg2+, and/or Zn2+ ion-incorporated m-SBFs. Among the tested solutions, the apatite coating formed in Mg2+- and Zn2+-containing m-SBF within one day, exhibiting uniform precipitation and a reduced tetragonal-to-monoclinic (t→m) transition. The incorporated Mg2+ and Zn2+ ions were successfully detected on the apatite coating, with Mg/Ca and Zn/Ca ratios of approximately 4.82% and 3.33%, respectively. Mg2⁺ is known to stimulate osteogenesis, while Zn2⁺ exhibits antibacterial activity. Furthermore, compared with standard SBF under high-temperature and high-pH conditions, the m-SBF induced markedly less t→m phase transition on YSZ substrates, suggesting that m-SBF, as a biomimetic medium for imparting bioactivity, provides a more suitable environment for YSZ substrates. This study demonstrates that HF surface treatment combined with Mg2+- and Zn2+-containing m-SBF pretreatment effectively imparts bioactivity to 3D-printed YSZ, offering a promising approach for next-generation osteoconductive ceramic implants.

  • Open Access

    Effect of Surface Functional Groups and Calcium Ion Adsorption on Formation of Polystyrene/Apatite Core–Shell Microspheres by Aqueous Solution Method

    by Takeshi Yabutsuka, Kota Nakanishi, Shigeomi Takai

    If a method for developing organic polymer/apatite core–shell microspheres encapsulating organic polymer microspheres with apatite shells can be constructed, it is possible to establish a fundamental methodology to fabricate apatite capsules for drug delivery carriers. In this study, polystyrene (PS) microspheres were used as model substances in organic polymer microspheres, and the effects of the surface functional groups on the PS microspheres on the amount of Ca2+ ions introduced onto the PS microspheres were investigated. The PS/apatite core–shell microspheres were prepared by immersing Ca2+-incorporated PS microspheres in a reaction solution containing Ca2+, HPO42−, and Mg2+ to coat the surface of PS microspheres with apatite. Particle characterization of the prepared PS/apatite core–shell microspheres was performed, and the relationships among the surface functional groups, surface potential, Ca2+ adsorption, and apatite shell formation in the aqueous solution on the PS microspheres were investigated.

  • Open Access

    Structural and Magnetic Characterization of Mechanically Alloyed (Fe2O3)1−x(Al2O3)x Solid Solutions via Pulsed Neutron Powder Diffraction

    by Dong Luo, Hayato Nakaishi, Takeshi Yabutsuka, Takashi Saito, Takashi Kamiyama, Masato Hagihala, Shigeomi Takai

    Neutron powder diffraction experiments were carried out to characterize mechanochemically synthesized (Fe2O3)1−x(Al2O3)x solid solutions with corundum-type structure, focusing on their lattice and magnetic structures with varying temperature and composition. The neutron diffraction experiments for (Fe2O3)0.5(Al2O3)0.5 in the temperature range between 4 K and 300 K reveal that no significant structural phase transition occurred. The behavior of temperature variation of lattice parameters is different from α-Fe2O3 and α-Al2O3 and reveals the thermal expansion coefficients of αa = 5.76(2) × 10−6 K−1 and αc = 6.19(5) × 10−6 K−1 between 200 K and 300 K. The room temperature neutron diffraction of (Fe2O3)1−x(Al2O3)x shows a linear decrease in lattice parameters with the aluminum substitution, following Vegard’s law, along with a decrease in the magnetic moment, indicating the dilution effect on spin interactions. With the increase in the aluminum substitution from x = 0 to 0.5, the deduced magnetic moment decreases from 2.224 μB to 0.862 μB.


  • Open Access

    Development of Rapid Bioactivity-Expressed Zr-50Ti Alloys by Surface Treatment with Modified Simulated Body Fluid

    by Yuwei Wu, Shigeomi Takai, Takeshi Yabutsuka

    Zr-50Ti alloys are promising biomaterials due to their excellent mechanical properties and low magnetic susceptibility. However, Zr-50Ti alloys do not inherently bond well with bone. This study aims to enhance the bioactivity and bonding strength of Zr-50Ti alloys for orthopedic implant materials. Initially, the surface of Zr-50Ti alloys was treated with a sulfuric acid solution to create a microporous structure, increasing surface roughness and area. Subsequently, low crystalline calcium phosphate (L-CaP) precipitation was controlled by adding Mg2+ and/or CO32− ions in modified simulated body fluid (m-SBF). The treated Zr-50Ti alloys were then subjected to cold isostatic pressing to force m-SBF into the micropores, followed by incubation to allow L-CaP formation. The apatite-forming process was tested in simulated body fluid (SBF). The results demonstrated that the incorporation of Mg2+ and/or CO32− ions enabled the L-CaP to cover the entire surface of Zr-50Ti alloys within only one day. After short-term soaking in SBF, the L-CaP layer, modulated by Mg2+ and/or CO32− ions, formed a uniform hydroxyapatite (HA) coating on the surface of the Zr-50Ti alloys, showing potential for optimized bone integration. After soaking in SBF for 14 days, the bonding strength between the apatite layer and alloy has the potential to meet the orthopedic application requirement of 22 MPa. This study demonstrates an effective method to enhance the bioactivity and bonding strength of Zr-50Ti alloys for orthopedic applications.


  • Open Access

    Structural Relaxation of LixNi0.8Co0.1Mn0.1O2 and LixNi0.55Co0.20Mn0.25O2 after Lithium Extraction to High Voltage Region (x ≤ 0.12) at 0.1 C-rate

    by Jian Kang, Takeshi Yabutsuka, Takeshi Yao, Shigeomi Takai

    Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.

  • Open Access

    Electrochemical Properties of Cs and La Co-doped CaWO4 Oxide Ion Conductor

    by Shigeomi Takai, Ryo Takemoto, Takeshi Yabutsuka, Takeshi Yao

    To clarify the contribution of defect structure of CaWO4-based system on the oxide ion conduction properties, we doped both cesium and lanthanum ions into CaWO4 as Ca0.9CsxLa0.1−xWO4.05−x. Scheelite-type structured solid solution can be obtained for the Cs-rich region (x ≥ 0.05) with oxygen deficiency, while second phase appears for La-rich region (x ≤ 0.025) assuming excess oxide ions. In the present system, a bend in Arrhenius plot of conductivity is observed around 850 °C as the typical CaWO4-based system even co-doping with La ions. In terms of the compositional dependence, ionic conduction develops from x = 0.05 with the amount of cation vacancy below 800 °C, while the conductivity enhancement starts at the La-rich region above 900 °C. This indicates that not only oxide ion vacancy but also interstitial attribute to the oxide ion conduction at high-temperature, which is also suggested by the activation energy.


  • Open Access

    Dependence property of isoelectric points and pH environment on enzyme immobilization on maghemite/hydroxyapatite composite particles

    by Takeshi Yabutsuka, Masaya Yamamoto, Shigeomi Takai

    We aimed to establish enzyme immobilization technology using the maghemite/hydroxyapatite (Fe2O3/HA) composite particles as enzyme immobilization carriers and to clarify the enzyme adsorption characteristics of the composite particles. Seven kinds of enzymes with various isoelectric points (pI) were immobilized on the Fe2O3/HA composite particles in buffered solution adjusted at pH = 7.40 or pH = 10.0, 36.5 °C. Effects of the enzyme pI and the solution pH on the immobilization were investigated. In both of the two kinds of buffered solutions, there was an increase or decrease distribution with a maximum local value for |pH-pI|, which indicated the charge state of the enzymes. The interaction between HA on the composite particles and adsorbed enzymes was expected to be the largest when |pH-pI| = 1–2. It was suggested that α-chymotrypsin, whose adsorbed amount was the most among the seven kinds of the enzymes, in addition, formed a monolayer on the surface of the composite particles in the buffered solution at pH = 7.40, 36.5 °C.


  • Open Access

    Surface Modification of Carbon Fiber-Polyetheretherketone Composite to Impart Bioactivity by Using Apatite Nuclei

    by Yuya Yamane, Takeshi Yabutsuka, Yusuke Takaoka, Chihiro Ishizaki, Shigeomi Takai, Shunsuke Fujibayashi

    The authors aimed to impart the apatite-forming ability to 50 wt% carbon fiber-polyetheretherketone composite (50C-PEEK), which has more suitable mechanical properties as artificial bone materials than pure PEEK. First, the 50C-PEEK was treated with sulfuric acid in a short time to form pores on the surface. Second, the surface of the 50C-PEEK was treated with oxygen plasma to improve the hydrophilicity. Finally, fine particles of calcium phosphate, which the authors refer to as “apatite nuclei”, were precipitated on the surface of the 50C-PEEK by soaking in an aqueous solution containing multiple inorganic ions such as phosphate and calcium (modified-SBF) at pH 8.20, 25 °C. The 50C-PEEK without the modified-SBF treatment did not show the formation of apatitic phase even after immersion in simulated body fluid (SBF) for 7 days. The 50C-PEEK treated with the modified-SBF showed the formation of apatitic phase on the entire surface within 1 day in the SBF. The apatite nuclei-precipitated 50C-PEEK will be expected as a new artificial bone material with high bioactivity that is obtained without complicated fabrication processes.