DKDmytro Klets

Dmytro Klets

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dmytro Klets has a total of 92 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    TORSIONAL MOMENT IRREGULARITY OF TWO INTERNAL COMBUSTION ENGINES WHEN INSTALLED IN SERIES ON A CAR

    by Mykhailo Podrigalo, Dmytro Klets, Serhii Vakhniuk, Дмитро Клец, Сергій Вахнюк

    The installation of two sequential internal combustion engines, each generating an indicator torque that obeys the harmonic law, makes it possible to shift the indicator torque and crankshaft rotation angle curves so that both engines operate in opposite phases. The analysis of the research indicates that replacing the power units in cars with two series-connected internal combustion engines makes it possible to reduce fuel consumption. It has been determined that fuel consumption can be reduced by reducing the unevenness of torque on the input shaft of the transmission, which in turn depends on the relative angular orientation of the crankshafts of the installed internal combustion engines. The study involved “digitization,” i.e., using numerical methods to convert the actual characteristics of the indicator torque change for 2-cylinder and 4-cylinder engines into digital form. Subsequently, the two characteristics (for the first and second engines) were superimposed on each other and their relative displacement along the axis was determined. By approximating the actual indicator torque curves with a harmonic law, graphs were constructed showing the dependence of the indicator torque on the crankshaft rotation angle of four-stroke internal combustion engines. The analysis showed that the torque unevenness coefficient depends on the angles of rotation of the crankshafts of both engines relative to the initial position. It was determined that the use of real characteristics of indicator torque change of two internal combustion engines installed in series allows obtaining the same result as when using idealized harmonic dependencies. The problem of determining the torque unevenness coefficient for two sequentially installed 2-cylinder and 4-cylinder engines, taking into account the real characteristics of their indicator torque changes, has been solved. The sequential installation of two 2-cylinder internal combustion engines at an angle of = 180°, and 4-cylinder engines at an angle of = 90°, allows the coefficient of unevenness of the total indicator torque to be reduced.

  • Model of Multicomponent Complex Motion as a Basis for Controlling a Group of Unmanned Platforms

    by Mykhailo Podrigalo, Ruslan Kaidalov, Dmytro Klets, Andriy Nikorchuk, Alexander Chernikov, Vitalii Shein, Oleksandr Bіlenko, Oleksandr Grebenyk, Oleksii Litvinov, Stanislav Horelyshev

  • Open Access

    Improving the efficiency of transportation convoys using unmanned vehicles

    by Mikhail Podrigalo, Ruslan Kaidalov, Igor Gritsuk, Stanislav Horielyshev, Andrіy Nikorchuk, Dmytro Klets, Serhii Sokolovskyi, Inna Shevchenko, Mykhailo Kholodov, Dmitro Baulin

    The object of this study is the movement process of a vehicle convoy formed with the help of unmanned vehicles. The research aims to solve the task related to improving the controllability, maneuverability, energy efficiency of vehicle convoys, as well as the throughput capacity of roads. One of the ways to address this issue is the use of unmanned vehicles. The subject of this study is the assessment of the possibility to improve the indicators of maneuverability, controllability, energy efficiency of vehicle convoys, as well as the throughput capacity of roads, through the use of unmanned vehicles. During the study, the concepts of controllability and maneuverability of unmanned vehicle convoys have been defined. The relationship between the use of unmanned vehicles and the improvement of maneuverability and controllability of convoys was established. The use of unmanned vehicles makes it possible to eliminate the need to consider braking distance when setting inter-vehicle distances and to reduce the safety gap from 5 meters to zero. The paper shows that the use of unmanned vehicle convoys improves maneuverability and controllability compared to conventional convoys. For example, the time to pass a short road section for a convoy of 40 vehicles traveling at 90 km/h is reduced by 60 seconds, and the length of a convoy of 20 vehicles moving at the same speed is reduced by 800 meters. An evaluation of the reduction in energy consumption for convoys with unmanned vehicles was carried out. A condition was derived, the fulfillment of which ensures a reduction in additional engine energy losses through the use of unmanned vehicles in a convoy. Applying the results will make it possible to bring the efficiency of road transport to the level of railroad transport, which is achieved by assembling vehicle trains


  • EVALUATION OF MANEUVERABILITY OF FOUR-WHEEL VEHICLES WITH TWO ROTATING PLATFORMS

    by D. Klets, S. Pavlov, H. Yarovyi

    In the conditions of military operations taking place in our country, increasing the maneuverability of multi- axle vehicles with special equipment ensures their survivability and efficiency of use. Maneuverability is a complex operational property, one of the components of which is controllability. Controllability characterizes the car's ability to respond adequately to the control (input) influence. For multi-axle cars, a promising way to improve controllability is the use of two-axis turning platforms, taking into account the possibility and implementation of non-standard turning methods. Maneuvers performed by multi- axle vehicles when moving in conditions of limited free space and in off-road conditions are, as a rule, difficult. Therefore, the indicator and criterion of the maneuverability of cars during a complex maneuver should be the time of the maneuver. In the article, using the example of a four-axle car with two two-axle rotary platforms, it is shown that the latter allow providing the best values of maneuverability indicators for that type of vehicle. When moving a four- axle car with a "crab" (compared to the traditional way of turning), the time required to perform the maneuver is reduced. However, when turning the car in this way, it is necessary to stop the car, return the platforms to the position for turning around the vertical axis. This circumstance increases the time of the maneuver, but not significantly. To the greatest extent, the advantage of non-traditional methods of performing the maneuver is revealed when a four-axle car with two rotating platforms moves from the initial static position of the car to any arbitrary new one. The use of maneuvering time as an indicator and criterion of car maneuverability made it possible to prove that the use of non-traditional maneuvering methods allows to increase the maneuverability and efficiency of using multi-axle cars.


  • Improving the Accuracy of Wheeled Vehicle Acceleration Estimation During Testing

    by Michael Podryhalo, Kharkiv National Automobile and Highway University, Olexand Polyanskyi, Yevgeniy Dubinin, Dmytro Klets, Vladyslava Baidala, Maksym Krasnokutskyi

    Michael Podryhalo, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: pmikhab@gmail.com, ORCID ID: 0000-0003-2426-0336 Olexand Polyanskyi, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: khadi.pas@gmail.com Yevgeniy Dubinin, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: dubinin-rmn@ukr.net, ORCID ID: 0000-0002-6176-7358 Dmytro Klets, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: prof_777@ ukr.net, ORCID ID: 0000-0001-7463-1030 Vladyslava Baidala, Assistant, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: vlada.baidala@gmail.com, ORCID ID: 0000-0002-6009-055X Maksym Krasnokutskyi, post graduate, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, Україна, e-mail: simson1988@ukr.net The study considers the influence of installation errors during the installation of linear acceleration sensors on the accuracy of measurements during testing of wheeled vehicles, including the dynamic stability of the position. The possibility of automatic correction of these errors to improve measurement accuracy is considered. The work includes establishing the dependence of linear acceleration components on the angular deviations of the axes of the wheeled vehicle coordinate system and developing a method of automatic correction in real time to ensure high quality measurements and maintain the reliability of measurement systems.The study considers the influence of installation errors during the installation of linear acceleration sensors on the accuracy of measurements during testing of wheeled vehicles, including the dynamic stability of the position. The possibility of automatic correction of these errors to improve measurement accuracy is considered. The work includes establishing the dependence of linear acceleration components on the angular deviations of the axes of the wheeled vehicle coordinate system and developing a method of automatic correction in real time to ensure high quality measurements and maintain the reliability of measurement systems.technologies of power plants of cars are developing rapidly, are aimed at reducing fuel consumption. A combination of internal combustion and electric motors in hybrid cars makes it possible to achieve an optimal balance between fuel efficiency and environmental friendliness, and ensures convenience and performance when driving on the road.

  • Open Access

    IMPROVEMENT OF THE METHOD OF TESTING THE DYNAMIC PROPERTIES OF WHEELED MACHINES WITH THE USE OF ARTIFICIAL INTELLIGENCE

    by Andrii Molodan, Yevhen Dubinin, Dmytro Klets, Oleksandr Polyansky, Andriy Korobko, Vladyslava Baidala, Maksym Krasnokutsky, Євген Дубінін, Дмитро Клец, Владислава Байдала, et al.

    The method of testing vehicles for dynamic position stability has been improved, which makes it possible to assesstheir lateral stability when driving on irregularities. The dynamic stability coefficient is proposed for use as an assessmentcriterion. The application of the developed method allows to obtain an assessment of stability in real time during theoperation of transport means.The structural scheme has been developed to ensure the reliability of the operation of wheeled vehicle, based onreducing the influence of the driver's qualifications as an element of the "driver-vehicle-road conditions" system on itsposition stability, taking into account the results of monitoring the technical condition.To conduct experiments and evaluate the results, the mobile registration and measurement complex (MRMC) wasused to assess and improve the safety of exploitation of wheeled vehicles, taking into account modern means andapproaches. A single-board computer Raspberry Pi version 3B + serves as a platform for the mobile registration andmeasurement complex. The architecture of MRMC is modular; it supports the installation of additional inertial sensors,photo and video fixation devices, GPS, as well as devices compatible with USB. Operating system – Raspbian based onDebian distribution (GNU / Linux).To further automate the process of controlling a wheeled vehicle, the promising scheme for the operation of theregistration and measuring complex with elements of artificial intelligence was developed, which allows, without theparticipation of the driver, to carry out the necessary actions to control it and ensure, including operational safety.The results can be used to assess the suitability and performance of wheeled vehicles.

  • TRANSPORT STRATEGY DURING MILITARY CONFLICT: PATHS TO RECOVERY AND INDUSTRY DEVELOPMENT

    by Oleksndr Tokin, National Transport University, Roman Dubas, Dmytro Klets, Kharkiv National Automobile and Road University


  • DETERMINATION OF THE PARTIAL ACCELERATION OF A TWO–AXLE VEHICLE WITH ALL–HANDLED WHEELS

    by Dmytro Klets, Yevhen Dubinin, Yevhen Pelypenko, Vladislava Baidala, Дмитро Клец, Євген Дубінін, Євген Пелипенко

    The proposed method allows evaluating an automobile handling with or without accounting withdrawal, with various types of drive wheels and various steering wheels using partial acceleration. Determination of lateral and tangential reactions on automobile tire while turning in view tire slip allows more accurate evaluating of automobile maneuverability, stability and handling. Determination of vehicle total and partial angular accelerations during its driving into rotation with and without accounting withdrawal allows developing an vehicles handling improving algorithm with different tire types. Using of different ways in vehicle managing is complicating associated with machine design and control process by machine handling characteristics changing during applying the locking devices. The equations of front-wheel drive vehicles and all-wheel drive vehicles rotational motion when driving on curves without removal are the same. Appearance of new ways to perform maneuvers such as turning movement with all the drive wheels (4WS), requires researching of movement trajectory, stability and handling of machines during specified maneuvering. The partial acceleration method allows the assessment of the controllability of vehicles with different types of drives (front-, rear - and all-wheel drive) and with different steerable wheels. The determination of lateral reactions on the wheels of the vehicle when turning allows for a more accurate assessment of the agility, stability and handling of vehicles


  • IMPROVEMENT OF THE WHEELED VEHICLES DYNAMIC TESTING METHOD

    by Yevhen Dubinin, Dmytro Klets, Oleksandr Polyansky, Andriy Korobko, Vladyslava Baidala

    The method of testing vehicles for dynamic position stability has been improved, which makes it possible to assess their lateral stability when driving on irregularities. The dynamic stability coefficient is proposed for use as an assessment criterion. The application of the developed method allows to obtain an assessment of stability in real time during the operation of transport means. The structural scheme has been developed to ensure the reliability of the operation of wheeled vehicle, based on reducing the influence of the driver's qualifications as an element of the "driver-vehicle-road conditions" system on its position stability, taking into account the results of monitoring the technical condition. To conduct experiments and evaluate the results, the mobile registration and measurement complex (MRMC) was used to assess and improve the safety of exploitation of wheeled vehicles, taking into account modern means and approaches. A single-board computer Raspberry Pi version 3B + serves as a platform for the mobile registration and measurement complex. The architecture of MRMC is modular; it supports the installation of additional inertial sensors, photo and video fixation devices, GPS, as well as devices compatible with USB. Operating system – Raspbian based on Debian distribution (GNU / Linux). To further automate the process of controlling a wheeled vehicle, the promising scheme for the operation of the registration and measuring complex with elements of artificial intelligence was developed, which allows, without the participation of the driver, to carry out the necessary actions to control it and ensure, including operational safety. The results can be used to assess the suitability and performance of wheeled vehicles.

  • Research of the influence of the operating parameters of a mobile lift on the oscillatory processes occurring during the work operations

    by Igor Kyrychenko, Oleksandr Reznikov, Dmytro Klets, Anton Kholodov, Pavlo Yehorov, Oleksandra Olieinikova

    The article provides an analysis of the results of an experimental study of oscillatory processes occurring in mobile lifts with working platforms (MLWP) during the working operations. According to the developed research methodology, the results of measurements of acceleration along the horizontal and vertical axes of the machine at the point of articulation of the boom and at the point of attachment of the working platform to the boom were obtained and analysed. The analysis of the obtained oscillograms indicates that the greatest oscillations occur at the point of attachment of the working platform to the boom along the vertical axis. Accordingly, a detailed analysis of the influence of the operating parameters of the mobile lift on the oscillatory processes occurring during the operation of the machine at the point of attachment of the working platform to the boom along the vertical axis was carried out.