MPMikhail Podrigalo

Mikhail Podrigalo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mikhail Podrigalo has a total of 127 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dynamics of vehicle acceleration with a stepless gear–friction transmission

    by M. Baitsur, V. Omelchenko, M. Podrigalo

    У статті викладено результати дослідження використання безступінчастої зубчасто-фрикційної коробки передачі, запропонованої авторами. Виявлено, що її використання у поєднанні з раціональними законами керування зміною передатних відношень дозволяє поліпшити динамічні показники та енергетичні властивості автомобілів.

  • Open Access

    Оцінювання напрацювання автомобіля з урахуванням непродуктивних витрат енергії двигуна

    by М.а. Подригало, О.с. Полянський, О.г. Закапко, М.в. Полтавський

    У статті розглянуто актуальну проблему вдосконалення методів оцінювання напрацювання автомобіля шляхом врахування непродуктивних витрат енергії двигуна. Традиційні показники, такі як пробіг у кілометрах або кількість відпрацьованих годин, не повною мірою відображають реальний технічний стан та енергетичну ефективність транспортного засобу. Це зумовлено тим, що вони не враховують енергію, витрачену на нерівномірність крутного моменту ДВЗ, маневрування та роботи в перехідних режимах, які є характерними для міського циклу або спеціальних умов експлуатації. Запропоновано комплексний підхід до визначення реального напрацювання, що ґрунтується на аналізі загального балансу енергії та її диференціації. Встановлено, що частка непродуктивних витрат енергії на коливання напрямних коліс суттєво впливає на напрацювання автомобіля. Описана математична модель дозволяє розділити корисну роботу та енергетичні втрати, що забезпечує більш об’єктивну оцінку експлуатаційної надійності автомобіля. Практичне застосування результатів дослідження дозволить оптимізувати графіки технічного обслуговування, підвищити точність прогнозування залишку ресурсу агрегатів, постачання запасних частин та впровадити ефективні стратегії енергозбереження в автотранспортних підприємствах.

  • Open Access

    TORSIONAL MOMENT IRREGULARITY OF TWO INTERNAL COMBUSTION ENGINES WHEN INSTALLED IN SERIES ON A CAR

    by Mykhailo Podrigalo, Dmytro Klets, Serhii Vakhniuk, Дмитро Клец, Сергій Вахнюк

    The installation of two sequential internal combustion engines, each generating an indicator torque that obeys the harmonic law, makes it possible to shift the indicator torque and crankshaft rotation angle curves so that both engines operate in opposite phases. The analysis of the research indicates that replacing the power units in cars with two series-connected internal combustion engines makes it possible to reduce fuel consumption. It has been determined that fuel consumption can be reduced by reducing the unevenness of torque on the input shaft of the transmission, which in turn depends on the relative angular orientation of the crankshafts of the installed internal combustion engines. The study involved “digitization,” i.e., using numerical methods to convert the actual characteristics of the indicator torque change for 2-cylinder and 4-cylinder engines into digital form. Subsequently, the two characteristics (for the first and second engines) were superimposed on each other and their relative displacement along the axis was determined. By approximating the actual indicator torque curves with a harmonic law, graphs were constructed showing the dependence of the indicator torque on the crankshaft rotation angle of four-stroke internal combustion engines. The analysis showed that the torque unevenness coefficient depends on the angles of rotation of the crankshafts of both engines relative to the initial position. It was determined that the use of real characteristics of indicator torque change of two internal combustion engines installed in series allows obtaining the same result as when using idealized harmonic dependencies. The problem of determining the torque unevenness coefficient for two sequentially installed 2-cylinder and 4-cylinder engines, taking into account the real characteristics of their indicator torque changes, has been solved. The sequential installation of two 2-cylinder internal combustion engines at an angle of = 180°, and 4-cylinder engines at an angle of = 90°, allows the coefficient of unevenness of the total indicator torque to be reduced.

  • Open Access

    ANALYSIS OF THE APPLICATION OF VOLUME HYDRAULIC MACHINES IN HYDRAULIC MECHANICAL TRANSMISSIONS OF VEHICLES

    by Grigory Avrunin, Mikhail Podrigalo, Nadiya Podryhalo, Oleksandr Katorgin, Ihor Bilan, Iryna Moroz

    Purpose. Development of recommendations for the use of positive displacement pumps and hydraulic motors for hydraulic transmissions in steplesstwo-stream hydromechanical transmissions of wheeled and tracked mobile machines. Research methodology. Analysis of modern designs andtechnical parameters of axial-piston and radial hydraulic machines with ball-pistons based on accumulated foreign and domestic experience. Studies of the radial-piston hydraulic transmission with ball-pistons of the GOP-900 model and the prospects for increasing its technical level are considered, the operation of the two-stream transmission of a railway motor locomotive in the full range of traction and speed characteristics is analyzed. Results. Ukrainian specialists have accumulated sufficient theoretical and experimental experience in the design of hydromechanical stepless transmissions as promising for the widespread distribution of such transmissions in mobile machines. It was determined that axial-piston hydraulic machines make it possible to create hydromechanical transmissions with a capacity of up to 350 kW, and radial-piston with ball-pistons with a capacity of more than 500 kW. These transmissions also have good monoblock layout capabilities, which significantly affects the mass and dimensions of hydromechanical transmissions. Dependencies are given for determining the leakage of the working fluid in the gap of the ball-piston working pair in the cylinder and the costs of local cooling of friction pairs. The materials of the article on the analysis of the technical characteristics of hydraulic machines andhydraulic fluid power can be useful for specialists in the national economy who are engaged in the design of hydraulic drives, new pumps and hydraulic motors, as well as for master's students who study the discipline ''Design and testing of hydraulic fluid power'' in the specialty ''Industrial mechanical engineering''.

  • Model of Multicomponent Complex Motion as a Basis for Controlling a Group of Unmanned Platforms

    by Mykhailo Podrigalo, Ruslan Kaidalov, Dmytro Klets, Andriy Nikorchuk, Alexander Chernikov, Vitalii Shein, Oleksandr Bіlenko, Oleksandr Grebenyk, Oleksii Litvinov, Stanislav Horelyshev

  • Open Access

    ЕКСПЕРИМЕНТАЛЬНЕ ТА ДИНАМІЧНЕ ДОСЛІДЖЕННЯ НАЗЕМНОЇ РОБОТИЗОВАНОЇ ПЛАТФОРМИ

    by М.а. Подригало, Д.м. Клец, Д.в. Абрамов, Г.с. Серіков, В.с. Шеїн, А.і. Нікорчук

    У статті розглянуто результати розроблення та експериментального дослідження дослідного зразка наземної роботизованої платформи з електричним приводом ведучих коліс. Конструкція платформи забезпечує мінімальні втрати енергії, підвищує ефективність приводу та спрощує конструкцію шасі, що позитивно впливає на надійність і ремонтопридатність системи. Низький центр мас сприяє підвищенню стійкості під час маневрування, руху на підйомах і подолання складних ділянок місцевості. Проведені випробування дали змогу визначити основні динамічні характеристики платформи – динамічність, керованість, стійкість керованого руху та прохідність, які є ключовими показниками її експлуатаційних властивостей.

  • Open Access

    УДОСКОНАЛЕННЯ МЕТОДУ ОЦІНКИ ДИНАМІКИ РОЗГОНУ АВТОМОБІЛІВ ВИКОРИСТАННЯМ МАСШТАБНОГО МОДЕЛЮВАННЯ

    by М.а. Подригало, А.і. Нікорчук, В.с. Шеїн, А.і. Коробко, О.г. Закапко

    При проведенні масштабного моделювання, з метою адекватної оцінки часу розгону до заданої швидкості необхідно порівнювати показники динамічних властивостей з аналогічними показниками автомобіля-еталону. При цьому необхідно враховувати масштабний коефіцієнт (масштаб) лінійного розміру. В роботі авторами для оцінювання показників динамічності при розгоні запропоновано використовувати середнє прискорення автомобілів на основі теорії подоби та методу парціальних прискорень. Отримані аналітичні залежності для визначення середнього прискорення автомобіля при розгоні з місця до максимальної швидкості і реалізації максимальної ефективної потужності двигуна, що дозволяє проводити оцінку потенціальних динамічних властивостей машин при проектуванні і модернізації.

  • Open Access

    Robust optimization of transport-technological schemes for cargo delivery under uncertainty

    by Mikhail Podryhalo, Andrii Korobko, Dmytrii Abramov

    Problem. The full-scale military aggression against Ukraine has fundamentally altered the architecture of logistics systems, rendering traditional «Just-in-Time» supply chain models ineffective. The blockade of Black Sea ports and the constant threat of shelling have forced a strategic shift of cargo flows to western land borders. This environment is characterized not by risk (stochastic uncertainty with known probabilities), but by epistemic (deep) uncertainty, where historical data becomes irrelevant. Consequently, classic deterministic and stochastic models, which focus on minimizing financial costs, are inadequate for humanitarian logistics, where the priority lies in minimizing social consequences and ensuring the physical survival of the population. Goal. The primary objective of this study is to enhance the efficiency and reliability of transport-technological schemes (TTS) for international cargo delivery in conditions of military conflict. This is achieved by developing a robust optimization methodology that, unlike classical approaches, minimizes total social costs and effectively accounts for the epistemic uncertainty of logistics network parameters. Methodology. The research methodology is based on robust optimization (RO) principles, which utilize «uncertainty sets» rather than probability distributions. The study develops a mathematical model centered on a composite objective function that integrates three key components: direct logistics costs, the cost of risk (threats to cargo and personnel), and the cost of deprivation (a non-linear economic valuation of the humanitarian impact caused by delivery delays). To handle time uncertainty, the authors formulate robust constraints using the concept of an «uncertainty budget» and propose a mechanism for dynamic parameter adaptation using Digital Twin technology. Results. A new mathematical model for selecting rational TTS has been developed. Unlike commercial models, the proposed function prioritizes social needs over financial economy in critical situations. The study successfully formulated a system of robust constraints that guarantees the adherence to delivery deadlines (Hard Time Windows) even under the realization of worst-case delay scenarios on a specified number of route segments. Scenario analysis of four strategies («Peace», «Humanitarian Crisis», «High Threat», «Maximum Uncertainty») demonstrated that adjusting the model's weight coefficients allows for the adaptation of the logistics system to current priorities–ranging from cost minimization to the maximization of safety or speed, regardless of economic factors. Originality. The scientific novelty lies in the integration of the deprivation cost function into a robust routing model specifically designed for conditions of epistemic uncertainty characteristic of wartime. The authors substantiate the shift from the paradigm of minimizing expected costs (stochastic approach) to minimizing costs in the worst-case scenario (robust approach) for critical humanitarian cargo. Practical value. The practical significance of the work involves the proposed concept of dynamic TTS management through the integration of the robust model with Digital Twin technology. This architecture enables operational route re-calculation in real-time based on heterogeneous data regarding traffic, infrastructure destruction, or military threats. This transforms static plans into flexible response mechanisms, ensuring the reliability of humanitarian corridors and the security of supply chains in highly volatile environments.

  • Open Access

    OPTIMIZING WAREHOUSE OPERATIONS IN INTERNATIONAL LOGISTICS HUBS USING MULTI-AXLE FORKLIFTS

    by Mikhail Podrigalo, Дмитрій Володимирович Абрамов, Андрій Іванович Коробко, Михайло Абович Пοдригалο

    In the context of rapid globalization and the intensification of e-commerce, international logistics hubs are operating at the limit of their throughput capacities, often becoming bottlenecks in global supply chains. The primary cause of low operational efficiency is the use of technologically outdated material handling equipment within physically constrained spaces. The objective of this study is to conduct a comprehensive comparative analysis of the operational and economic efficiency of standard forklifts versus innovative, high-maneuverability, multi-axle loading mechanisms to quantitatively justify the feasibility of their implementation.To achieve this objective, the method of system modeling was employed, enabling a comparative analysis of two operational scenarios for a warehouse complex. The baseline scenario involved the operation of a standard electric forklift, the TOYOTA Traigo 8FBMK20T, while the proposed scenario featured a high-maneuverability, multi-axle forklift equipped with two dual-axle rotating platforms. These platforms provide unique kinematic capabilities, including lateral ('crab') movement and rotation around its own axis. The analysis was based on the calculation of key performance indicators across a range of transport distances from 50 to 500 meters. The modeling results demonstrated significant advantages of the proposed technology. For an average transport distance of 300 meters, the work cycle time for the high-maneuverability forklift was reduced by 21 %, leading to a corresponding increase in operational productivity of 26.6 %. Consequently, to handle a maximum daily cargo turnover of 500 tons, 22 % fewer units of equipment are required (38 versus 49), which generates direct savings in operational costs of up to UAH 8,800 per day. It is proven that investing in high-maneuverability equipment is not merely an operational upgrade but a strategic tool. It allows for a fundamental increase in warehouse capacity due to the ability to operate in narrower aisles, thereby avoiding capital expenditures on facility expansion and enhancing the competitiveness of the logistics hub in the international market.

  • Open Access

    DETERMINING DRIVER WORK SCHEDULES IN DOMESTIC AND INTERNATIONAL FREIGHT TRANSPORT

    by М.а. Подригало, Д. В. Абрамов, А.і. Коробко

    The road freight transport sector is facing a critical structural crisis due to a severe shortage of qualified drivers, a problem significantly exacerbated in Ukraine by the full-scale military invasion and subsequent mobilization. This deficit has led to a situation where approximately 30% of trucks are idle, directly threatening national supply chains and the country's export potential. A key contributing factor is the inefficient scheduling of driver work and rest periods, which fosters a detrimental cycle of professional burnout and high staff turnover, making the profession unattractive and deepening the human capital crisis. Consequently, optimizing driver schedules has evolved from a simple operational task into a strategic imperative for the competitiveness and survival of transport companies. This article presents a scientific-methodological approach to define and optimize the work regimes for drivers on national and international freight routes. The primary objective is to develop a framework that ensures strict compliance with legal requirements, enhances road safety, and maximizes the operational efficiency of vehicle utilization. The methodology treats this challenge as a multi-criteria Vehicle Routing Problem (VRP) with time windows and complex constraints derived from driver work regulations. A comparative analysis of Ukraine’s national legislation (Order No. 340) and the European Agreement Concerning the Work of Crews of Vehicles (AETR) reveals a high degree of harmonization, simplifying the planning process for international transport. The research highlights that these regulations form a tightly coupled system where even minor delays can trigger cascading, non-linear consequences, rendering manual planning unreliable and underscoring the necessity of a computational approach. The paper formalizes the problem by converting regulatory limits into rigorous mathematical constraints and proposes a sequence of calculations to determine trip durations while accounting for all legally mandated rest periods. It concludes that effective management requires an integrated system combining three pillars: normative regulation, technological control (e.g., digital tachographs), and scientific optimization. By implementing the system, companies can create predictable and balanced schedules, turning this capability into a powerful competitive advantage for attracting and retaining scarce driving professionals.