Berthold Ocker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Berthold Ocker has a total of 123 co-authors. Here are the top co-authors by number of shared publications:
- Juergen Langer
Singulus Technologies AG 4 , 63796 Kahl am Main, Germany
9 shared publications D. Ravelosona
Centre de Nanosciences et de Nanotechnologies, CNRS, Université Paris-Saclay 1 , 91120 Palaiseau, France
3 shared publicationsG. Agnus
Centre de Nanosciences et de Nanotechnologies, CNRS, Université Paris-Saclay 1 , 91120 Palaiseau, France
3 shared publications- Gerhard Jakob
Institute of Physics, Johannes Gutenberg-University Mainz, Mainz, Germany
3 shared publications - Liza Herrera Diez
Centre de Nanosciences et de Nanotechnologies, CNRS, Université Paris-Saclay, 91120 Palaiseau, France
3 shared publications - Mathias Kläui
Johannes Gutenberg-Universität Mainz
3 shared publications
Latest Publications
- 10 August 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (6) , 062406
Magnetic domain wall curvature induced by wire edge pinning
In this study, we report on the analysis of the magnetic domain wall (DW) curvature due to magnetic field induced motion in Ta/CoFeB/MgO and Pt/Co/Pt wires with perpendicular magnetic anisotropy. In wires of 20 μm and 25 μm, a large edge pinning potential produces the anchoring of the DW ends to the wire edges, which is evidenced as a significant curvature of the DW front as it propagates. As the driving magnetic field is increased, the curvature reduces as a result of the system moving away from the creep regime of DW motion, which implies a weaker dependence of the DW dynamics on the interaction between the DW and the wire edge defects. A simple model is derived to describe the dependence of the DW curvature on the driving magnetic field and allows us to extract the parameter σE, which accounts for the strength of the edge pinning potential. The model describes well the systems with both weak and strong bulk pinning potentials like Ta/CoFeB/MgO and Pt/Co/Pt, respectively. This provides a means to quantify the effect of edge pinning induced DW curvature on magnetic DW dynamics.
- 10 August 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (6) , 062406
Magnetic domain wall curvature induced by wire edge pinning
In this study, we report on the analysis of the magnetic domain wall (DW) curvature due to magnetic field induced motion in Ta/CoFeB/MgO and Pt/Co/Pt wires with perpendicular magnetic anisotropy. In wires of 20 μm and 25 μm, a large edge pinning potential produces the anchoring of the DW ends to the wire edges, which is evidenced as a significant curvature of the DW front as it propagates. As the driving magnetic field is increased, the curvature reduces as a result of the system moving away from the creep regime of DW motion, which implies a weaker dependence of the DW dynamics on the interaction between the DW and the wire edge defects. A simple model is derived to describe the dependence of the DW curvature on the driving magnetic field and allows us to extract the parameter σE, which accounts for the strength of the edge pinning potential. The model describes well the systems with both weak and strong bulk pinning potentials like Ta/CoFeB/MgO and Pt/Co/Pt, respectively. This provides a means to quantify the effect of edge pinning induced DW curvature on magnetic DW dynamics.
- 15 June 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (24) , 242401
Spin–orbit torque driven multi-level switching in He+ irradiated W–CoFeB–MgO Hall bars with perpendicular anisotropy
We have investigated the spin–orbit torque-driven magnetization switching in W/CoFeB/MgO Hall bars with perpendicular magnetic anisotropy. He+ ion irradiation through a mask has been used to reduce locally the effective perpendicular anisotropy at a Hall cross. Anomalous Hall effect measurements combined with Kerr microscopy indicate that the switching process is dominated by domain wall (DW) nucleation in the irradiated region followed by rapid domain propagation at a current density as low as 0.8 MA/cm2 with an assisting in-plane magnetic field. Thanks to the implemented strong pinning of the DW at the transition between the irradiated and the non-irradiated region, an intermediate Hall resistance state is induced, which is further verified by finite element simulations. Such a method to control electrically multi-level resistances using He+ ion irradiation shows great potential in realizing neuromorphic and memristor devices.
- 15 June 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (24) , 242401
Spin–orbit torque driven multi-level switching in He+ irradiated W–CoFeB–MgO Hall bars with perpendicular anisotropy
We have investigated the spin–orbit torque-driven magnetization switching in W/CoFeB/MgO Hall bars with perpendicular magnetic anisotropy. He+ ion irradiation through a mask has been used to reduce locally the effective perpendicular anisotropy at a Hall cross. Anomalous Hall effect measurements combined with Kerr microscopy indicate that the switching process is dominated by domain wall (DW) nucleation in the irradiated region followed by rapid domain propagation at a current density as low as 0.8 MA/cm2 with an assisting in-plane magnetic field. Thanks to the implemented strong pinning of the DW at the transition between the irradiated and the non-irradiated region, an intermediate Hall resistance state is induced, which is further verified by finite element simulations. Such a method to control electrically multi-level resistances using He+ ion irradiation shows great potential in realizing neuromorphic and memristor devices.
- 16 September 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (12) , 122404
Enhancing domain wall velocity through interface intermixing in W-CoFeB-MgO films with perpendicular anisotropy
We study the influence of He+ irradiation induced interface intermixing on magnetic domain wall (DW) dynamics in W-CoFeB (0.6 nm)-MgO ultrathin films, which exhibit high perpendicular magnetic anisotropy and large Dzyaloshinskii-Moriya interaction (DMI) values. Whereas the pristine films exhibit strong DW pinning, we observe a large increase in the DW velocity in the creep regime upon He+ irradiation, which is attributed to the reduction of pinning centers induced by interface intermixing. Asymmetric in-plane field-driven domain expansion experiments show that the DMI value is slightly reduced upon irradiation, and a direct relationship between DMI and interface anisotropy is demonstrated. Our findings provide insights into the material design and interface control for DW dynamics, as well as for DMI, enabling the development of high-performance spintronic devices based on ultrathin magnetic layers.
- 16 September 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (12) , 122404
Enhancing domain wall velocity through interface intermixing in W-CoFeB-MgO films with perpendicular anisotropy
We study the influence of He+ irradiation induced interface intermixing on magnetic domain wall (DW) dynamics in W-CoFeB (0.6 nm)-MgO ultrathin films, which exhibit high perpendicular magnetic anisotropy and large Dzyaloshinskii-Moriya interaction (DMI) values. Whereas the pristine films exhibit strong DW pinning, we observe a large increase in the DW velocity in the creep regime upon He+ irradiation, which is attributed to the reduction of pinning centers induced by interface intermixing. Asymmetric in-plane field-driven domain expansion experiments show that the DMI value is slightly reduced upon irradiation, and a direct relationship between DMI and interface anisotropy is demonstrated. Our findings provide insights into the material design and interface control for DW dynamics, as well as for DMI, enabling the development of high-performance spintronic devices based on ultrathin magnetic layers.
- 11 March 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 114 (10) , 102402
Assessment of conduction mechanisms through MgO ultrathin barriers in CoFeB/MgO/CoFeB perpendicular magnetic tunnel junctions
Perpendicular magnetic tunnel junctions (p-MTJs) have been explored for spin transfer torque magnetic random access memory devices (STT-MRAMs). The current-induced switching (CIS) of the p-MTJs requires a relatively high current density (J); thereby, very thin insulating barriers are required, consequently increasing the risk of non-tunneling conduction mechanisms through the MgO film. In this work, we fabricated CoFeB/MgO/CoFeB p-MTJs and studied the CIS characteristics, with the obtained switching current densities of about 2 × 1010 A/m2. The filament conduction through the MgO film was induced by applying a high set current (Iset) until a significant decrease in the resistance (R) is observed. A decrease in R with increasing current (I) for parallel (P) and antiparallel (AP) states was observed. In contrast, an increase in R with the increasing I value was observed for filament p-MTJs. We used a two-channel model to extract the filament resistance (Rf) and filament current (If). The Rf dependence on the electrical power (Pf) was linearly fitted, and a heating coefficient β of about 6%/mW was obtained, which was much higher than 0.15%/mW obtained from the bulk metallic multilayers of the top electrode. The CIS for filament p-MTJs was modeled by considering the bias dependence of the tunneling and the thermal dependence of Rf, showing a significant change in the CIS curves and switching currents. Our study addresses the effect of filament conduction on the tunneling current of CoFeB/MgO/CoFeB p-MTJs, critical for the design and control of the p-MTJ based devices, such as STT-MRAMs.
- 11 March 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 114 (10) , 102402
Assessment of conduction mechanisms through MgO ultrathin barriers in CoFeB/MgO/CoFeB perpendicular magnetic tunnel junctions
Perpendicular magnetic tunnel junctions (p-MTJs) have been explored for spin transfer torque magnetic random access memory devices (STT-MRAMs). The current-induced switching (CIS) of the p-MTJs requires a relatively high current density (J); thereby, very thin insulating barriers are required, consequently increasing the risk of non-tunneling conduction mechanisms through the MgO film. In this work, we fabricated CoFeB/MgO/CoFeB p-MTJs and studied the CIS characteristics, with the obtained switching current densities of about 2 × 1010 A/m2. The filament conduction through the MgO film was induced by applying a high set current (Iset) until a significant decrease in the resistance (R) is observed. A decrease in R with increasing current (I) for parallel (P) and antiparallel (AP) states was observed. In contrast, an increase in R with the increasing I value was observed for filament p-MTJs. We used a two-channel model to extract the filament resistance (Rf) and filament current (If). The Rf dependence on the electrical power (Pf) was linearly fitted, and a heating coefficient β of about 6%/mW was obtained, which was much higher than 0.15%/mW obtained from the bulk metallic multilayers of the top electrode. The CIS for filament p-MTJs was modeled by considering the bias dependence of the tunneling and the thermal dependence of Rf, showing a significant change in the CIS curves and switching currents. Our study addresses the effect of filament conduction on the tunneling current of CoFeB/MgO/CoFeB p-MTJs, critical for the design and control of the p-MTJ based devices, such as STT-MRAMs.
- 6 October 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (13) , 133907
Electric field controlled domain wall dynamics and magnetic easy axis switching in liquid gated CoFeB/MgO films
We present reversible electric (E) field driven switching of the magnetic easy axis in CoFeB/MgO/HfO2 heterostructures from perpendicular to in-plane using an ionic liquid gate. The modification of magnetic anisotropy reaches 0.108 mJ/m2 in a gate voltage range between −3 V and 3.5 V with an efficiency of 82 fJ (V m)–1. The influence of the E-field induced anisotropy changes on domain nucleation and propagation of magnetic domain walls has also been studied in the perpendicular anisotropy state. A significant modulation of the domain wall velocity is observed in both the creep and depinning regimes of domain wall motion consistent with the E-field induced anisotropy variation. In addition, we demonstrate voltage controlled magnetization switching under a constant magnetic field and voltage control of domain wall pinning.
- 6 October 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (13) , 133907
Electric field controlled domain wall dynamics and magnetic easy axis switching in liquid gated CoFeB/MgO films
We present reversible electric (E) field driven switching of the magnetic easy axis in CoFeB/MgO/HfO2 heterostructures from perpendicular to in-plane using an ionic liquid gate. The modification of magnetic anisotropy reaches 0.108 mJ/m2 in a gate voltage range between −3 V and 3.5 V with an efficiency of 82 fJ (V m)–1. The influence of the E-field induced anisotropy changes on domain nucleation and propagation of magnetic domain walls has also been studied in the perpendicular anisotropy state. A significant modulation of the domain wall velocity is observed in both the creep and depinning regimes of domain wall motion consistent with the E-field induced anisotropy variation. In addition, we demonstrate voltage controlled magnetization switching under a constant magnetic field and voltage control of domain wall pinning.
- 10 July 2017
- Published by AIP Publishing in Applied Physics Letters
- Vol. 111 (2) , 022409
Investigation of the Dzyaloshinskii-Moriya interaction and room temperature skyrmions in W/CoFeB/MgO thin films and microwires
Recent studies have shown that material structures, which lack structural inversion symmetry and have high spin-orbit coupling can exhibit chiral magnetic textures and skyrmions which could be a key component for next generation storage devices. The Dzyaloshinskii-Moriya Interaction (DMI) that stabilizes skyrmions is an anti-symmetric exchange interaction favoring non-collinear orientation of neighboring spins. It has been shown that materials systems with high DMI can lead to very efficient domain wall and skyrmion motion by spin-orbit torques. To engineer such devices, it is important to quantify the DMI for a given material system. Here, we extract the DMI at the Heavy Metal/Ferromagnet interface using two complementary measurement schemes, namely, asymmetric domain wall motion and the magnetic stripe annihilation. By using the two different measurement schemes, we find for W(5 nm)/Co20Fe60B20(0.6 nm)/MgO(2 nm) the DMI to be 0.68 ± 0.05 mJ/m2 and 0.73 ± 0.5 mJ/m2, respectively. Furthermore, we show that this DMI stabilizes skyrmions at room temperature and that there is a strong dependence of the DMI on the relative composition of the CoFeB alloy. Finally, we optimize the layers and the interfaces using different growth conditions and demonstrate that a higher deposition rate leads to a more uniform film with reduced pinning and skyrmions that can be manipulated by spin orbit torques.
- 10 July 2017
- Published by AIP Publishing in Applied Physics Letters
- Vol. 111 (2) , 022409
Investigation of the Dzyaloshinskii-Moriya interaction and room temperature skyrmions in W/CoFeB/MgO thin films and microwires
Recent studies have shown that material structures, which lack structural inversion symmetry and have high spin-orbit coupling can exhibit chiral magnetic textures and skyrmions which could be a key component for next generation storage devices. The Dzyaloshinskii-Moriya Interaction (DMI) that stabilizes skyrmions is an anti-symmetric exchange interaction favoring non-collinear orientation of neighboring spins. It has been shown that materials systems with high DMI can lead to very efficient domain wall and skyrmion motion by spin-orbit torques. To engineer such devices, it is important to quantify the DMI for a given material system. Here, we extract the DMI at the Heavy Metal/Ferromagnet interface using two complementary measurement schemes, namely, asymmetric domain wall motion and the magnetic stripe annihilation. By using the two different measurement schemes, we find for W(5 nm)/Co20Fe60B20(0.6 nm)/MgO(2 nm) the DMI to be 0.68 ± 0.05 mJ/m2 and 0.73 ± 0.5 mJ/m2, respectively. Furthermore, we show that this DMI stabilizes skyrmions at room temperature and that there is a strong dependence of the DMI on the relative composition of the CoFeB alloy. Finally, we optimize the layers and the interfaces using different growth conditions and demonstrate that a higher deposition rate leads to a more uniform film with reduced pinning and skyrmions that can be manipulated by spin orbit torques.
- 26 September 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (13) , 132404
Effect of annealing on the interfacial Dzyaloshinskii-Moriya interaction in Ta/CoFeB/MgO trilayers
The interfacial Dzyaloshinskii-Moriya interaction (DMI) has been shown to stabilize homochiral Néel-type domain walls in thin films with perpendicular magnetic anisotropy, and as a result, permit them to be propagated by a spin Hall torque. In this study, we demonstrate that in Ta/Co20Fe60B20/MgO, the DMI may be influenced by annealing. We find that the DMI peaks at mJ/m2 at an annealing temperature of 230 °C. DMI fields were measured using a purely field-driven creep regime domain expansion technique. The DMI field and the anisotropy field follow a similar trend as a function of annealing temperature. We infer that the behavior of the DMI and the anisotropy are related to interfacial crystal ordering and B expulsion out of the CoFeB layer as the annealing temperature is increased.- 26 September 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (13) , 132404
Effect of annealing on the interfacial Dzyaloshinskii-Moriya interaction in Ta/CoFeB/MgO trilayers
The interfacial Dzyaloshinskii-Moriya interaction (DMI) has been shown to stabilize homochiral Néel-type domain walls in thin films with perpendicular magnetic anisotropy, and as a result, permit them to be propagated by a spin Hall torque. In this study, we demonstrate that in Ta/Co20Fe60B20/MgO, the DMI may be influenced by annealing. We find that the DMI peaks at mJ/m2 at an annealing temperature of 230 °C. DMI fields were measured using a purely field-driven creep regime domain expansion technique. The DMI field and the anisotropy field follow a similar trend as a function of annealing temperature. We infer that the behavior of the DMI and the anisotropy are related to interfacial crystal ordering and B expulsion out of the CoFeB layer as the annealing temperature is increased.- 11 July 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 120 (2) , 023901
Ionic-liquid gating of perpendicularly magnetised CoFeB/MgO thin films
We present the modulation of anisotropy field, coercivity, and domain wall (DW) velocity in CoFeB/MgO thin films with perpendicular anisotropy by applying voltages across an ionic liquid gate. Domain wall velocities in the creep regime can be modulated by a factor of 4.2, and the anisotropy field of the device can be modulated by 40 mT when going from +0.8 V to −0.8 V. The applied E-fields are seen to significantly influence DWs' pinning, depinning, and nucleation processes. In addition, we report on the evolution of the magnetic properties of the liquid/solid device as a function of time going from the pristine CoFeB/MgO film through device fabrication and operation up to one month. These results show that the solid/liquid device structure based on CoFeB/MgO thin films can be an efficient way to control magnetic properties with voltages below 1 V.
- 11 July 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 120 (2) , 023901
Ionic-liquid gating of perpendicularly magnetised CoFeB/MgO thin films
We present the modulation of anisotropy field, coercivity, and domain wall (DW) velocity in CoFeB/MgO thin films with perpendicular anisotropy by applying voltages across an ionic liquid gate. Domain wall velocities in the creep regime can be modulated by a factor of 4.2, and the anisotropy field of the device can be modulated by 40 mT when going from +0.8 V to −0.8 V. The applied E-fields are seen to significantly influence DWs' pinning, depinning, and nucleation processes. In addition, we report on the evolution of the magnetic properties of the liquid/solid device as a function of time going from the pristine CoFeB/MgO film through device fabrication and operation up to one month. These results show that the solid/liquid device structure based on CoFeB/MgO thin films can be an efficient way to control magnetic properties with voltages below 1 V.
- Open Access
- 1 July 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (7) , 075014
In-plane magnetic field effect on switching voltage and thermal stability in electric-field-controlled perpendicular magnetic tunnel junctions
The effect of in-plane magnetic field on switching voltage (Vsw) and thermal stability factor (Δ) are investigated in electric-field-controlled perpendicular magnetic tunnel junctions (p-MTJs). Dwell time measurements are used to determine the voltage dependence of the energy barrier height for various in-plane magnetic fields (Hin), and gain insight into the Hin dependent energy landscape. We find that both Vsw and Δ decrease with increasing Hin, with a dominant linear dependence. The results are reproduced by calculations based on a macrospin model while accounting for the modified magnetization configuration in the presence of an external magnetic field.
- 1 July 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (7) , 075014
Open AccessIn-plane magnetic field effect on switching voltage and thermal stability in electric-field-controlled perpendicular magnetic tunnel junctions
The effect of in-plane magnetic field on switching voltage (Vsw) and thermal stability factor (Δ) are investigated in electric-field-controlled perpendicular magnetic tunnel junctions (p-MTJs). Dwell time measurements are used to determine the voltage dependence of the energy barrier height for various in-plane magnetic fields (Hin), and gain insight into the Hin dependent energy landscape. We find that both Vsw and Δ decrease with increasing Hin, with a dominant linear dependence. The results are reproduced by calculations based on a macrospin model while accounting for the modified magnetization configuration in the presence of an external magnetic field.
- Open Access
- 1 June 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (6) , 065321
Evolution of the interfacial magnetic anisotropy in MgO/CoFeB/Ta/Ru based multilayers as a function of annealing temperature
We report the effect of annealing temperature on the dynamic and static magnetic properties of MgO/CoFeB/Ta/Ru multilayers. Angular resolved ferromagnetic resonance measurement results show that the as-deposited film exhibits in-plane magnetic anisotropy, whereas in the annealed films the magnetic easy-axis is almost along the direction perpendicular to the plane of the layers. The extracted interfacial anisotropy energy, Ki, is maximized at an annealing temperature 225∘C, in agreement with the vibrating sample magnetometry results. Although the magnetization is not fully out-of-plane, controlling the degree of the magnetization obliqueness may be advantageous for specific applications such as spin-transfer oscillators.
- 1 June 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (6) , 065321
Open AccessEvolution of the interfacial magnetic anisotropy in MgO/CoFeB/Ta/Ru based multilayers as a function of annealing temperature
We report the effect of annealing temperature on the dynamic and static magnetic properties of MgO/CoFeB/Ta/Ru multilayers. Angular resolved ferromagnetic resonance measurement results show that the as-deposited film exhibits in-plane magnetic anisotropy, whereas in the annealed films the magnetic easy-axis is almost along the direction perpendicular to the plane of the layers. The extracted interfacial anisotropy energy, Ki, is maximized at an annealing temperature 225∘C, in agreement with the vibrating sample magnetometry results. Although the magnetization is not fully out-of-plane, controlling the degree of the magnetization obliqueness may be advantageous for specific applications such as spin-transfer oscillators.