JLJuergen Langer

Juergen Langer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Juergen Langer has a total of 184 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Differential magneto-ionic artificial synapse

    by H. N. Mohanty, G. Bernard, M.-A. Syskaki, K. Cottart, A. Durnez, J. Langer, D. Querlioz, L. Herrera Diez

    Magneto-ionics offers exciting opportunities to introduce magnetic functionalities into ionics-based artificial synapses. However, learning applications require symmetry and linearity in the weight-update profile, which remains a challenge not only for magneto-ionics but also for all ionics-based synaptic devices. We demonstrate a magneto-ionic synaptic element exhibiting symmetric potentiation and depression under unipolar gate operation and differential anomalous Hall effect readout. The device is composed of two interconnected Ta/CoFeB/HfO2 Hall bars with individual ionic-gate electrodes able to induce a spin-reorientation transition from perpendicular to in-plane magnetic anisotropy. The combined anomalous Hall effect signal is measured through shared Hall voltage leads, enabling the direct subtraction of the individual signals by applying bias currents of opposite polarity to each Hall bar. This configuration enables synaptic operation using exclusively negative gate voltages; gating one Hall bar induces synaptic potentiation, while gating the other one results in synaptic depression. Operating exclusively under gate voltages of the same polarity, this device architecture avoids the asymmetries in magneto-ionic response, switching speed, and retention that appear with the use of positive and negative gate voltage pulses for potentiation and depression. In addition, operating under an external magnetic field provides dynamic control of the weight-update linearity in both potentiation and depression. The proposed approach provides a robust route toward linear and symmetric synaptic behavior in devices that combine magnetic and ionic functionalities.

  • Reservoir computing in a lithium-based magneto-ionic device

    by Sreeveni Das, Rhodri Mansell, Aarne Piha, Lukáš Flajšman, Maria-Andromachi Syskaki, Jürgen Langer, Sebastiaan van Dijken

    In-materio computing exploits the intrinsic physical dynamics of materials to perform complex computations, enabling low-power, real-time data processing by embedding computation directly within physical layers. Here, we demonstrate a voltage-controlled magneto-ionic device that functions as a reservoir computer capable of forecasting chaotic time series. The device consists of a crossbar structure with a Ta/CoFeB/Ta/MgO/Ta bottom electrode and a LiPON/Pt top electrode. A chaotic Mackey–Glass time series is encoded into a voltage signal applied to the device, while 2D Fourier transforms of voltage-dependent magnetic domain patterns form the output. Performance is influenced by the input rate, smoothing of the output, the number of elements in the reservoir state vector, and the training duration. We identify two distinct computational regimes: Short-term prediction is optimized using smoothed, low-dimensional states with minimal training, whereas prediction around the Mackey–Glass delay time benefits from unsmoothed, high-dimensional states and extended training. Reservoir computing metrics reveal that slower input rates are more tolerant to output smoothing, while faster input rates degrade both memory capacity and nonlinear processing. These findings demonstrate the potential of magneto-ionic systems for neuromorphic computing and offer design principles for tuning performance in response to input signal characteristics.

  • Exploring the full magneto-ionic oxidation spectrum in Pt/CoFeB/HfO2

    by I. Benguettat-El Mokhtari, R. Pachat, V. Porée, A. Lamperti, Y. Roussigné, M.-A. Syskaki, J. Wrona, G. Bernard, A. Cataldo, A. Resta, et al.

    We show that in Pt/CoFeB/HfO2 a wide range of oxidation levels at the ferromagnet/oxide interface can be accessed through magneto-ionic gating using ionic liquid gates. Perpendicular magnetic anisotropy (PMA) is induced at intermediate oxidation levels, while two in-plane anisotropy states with nonequivalent ionic states are induced for under-oxidized and over-oxidized interfaces. This system shows reversibility and non-volatility in the whole range of oxidation states, where oxidation levels have been monitored by x-ray absorption spectroscopy and x-ray photoelectron spectroscopy. This study shows that multistate magneto-ionic memory elements with a wider range of intermediate states can be designed by leveraging both under- and over-oxidation around the optimal oxidation state that induces PMA.


  • Open Access

    Magneto-ionic modulation of the interlayer exchange interaction in synthetic antiferromagnets

    by Maria-Andromachi Syskaki, Takaaki Dohi, Beatrice Bednarz, Sergei Olegovich Filnov, Sergey Alexeyevich Kasatikov, Mona Bhukta, Alevtina Smekhova, Rohit Pachat, Johannes Wilhelmus van der Jagt, Shimpei Ono, et al.

    The electric-field control of magnetism is a highly promising and potentially effective approach for realizing energy-efficient applications. Recent interest has focused on the magneto-ionic effect in synthetic antiferromagnets, driven by its potential to enable high-density data storage devices with ultra-low power consumption. However, the underlying mechanism responsible for the magneto-ionic effect on the interlayer exchange coupling remains elusive. In our work, we find that the modulation of the interlayer exchange coupling is highly sensitive to the thickness of the ferromagnetic layer. We have identified that the changes in the interlayer exchange coupling induced by the gate voltage can be associated with the magneto-ionic effects on the top ferromagnetic layer of the synthetic antiferromagnet. The direct contact between the high ion mobility oxide and the top ferromagnetic layer plays a crucial role in facilitating these effects, largely modifying the anisotropy of the layers. Our findings highlight the important role of magneto-ionic control over the properties of the top ferromagnetic layer in governing the observed modifications in the interlayer exchange coupling. This study provides crucial insight into the intricate interplay between stack structure and magneto-ionic effect on magnetic properties in synthetic antiferromagnetic thin film systems.


  • Controlling interface anisotropy in CoFeB/MgO/HfO2 using dusting layers and magneto-ionic gating

    by T. Bhatnagar-Schöffmann, A. Kovàcs, R. Pachat, D. Ourdani, A. Lamperti, M.-A. Syskaki, T. da Câmara Santa Clara Gomes, Y. Roussigné, S. Ono, J. Langer, et al.

    In this work, we present the magneto-ionic response to ionic liquid gating in Ta/CoFeB/MgO/HfO2 stacks, where heavy metal dusting layers of Ta, W, and Pt are inserted at the Ta/CoFeB and CoFeB/MgO interfaces. Dusting layers of W inserted at the Ta/CoFeB interface increase perpendicular magnetic anisotropy (PMA) by more than 50%, while no significant changes are seen for Pt. In these samples, gating cannot break the PMA seeded at the CoFeB/MgO interface, only relatively small changes in the coercivity can be induced, about 20% for Ta and Pt and 6% for W. At the CoFeB/MgO interface, a significant quenching of the magnetization is seen when W and Ta dusting layers are inserted, which remains unchanged after gating, suggesting a critical deterioration of the CoFeB. In contrast, Pt dusting layers result in an in-plane anisotropy that can be reversibly converted to PMA through magneto-ionic gating while preserving the polycrystalline structure of the MgO layer. This shows that dusting layers can be effectively used not only to engineer magnetic properties in multilayers but also to strongly modify their magneto-ionic performance.


  • Control of magnetoelastic coupling in Ni/Fe multilayers using He+ ion irradiation

    by G. Masciocchi, J. W. van der Jagt, M.-A. Syskaki, A. Lamperti, N. Wolff, A. Lotnyk, J. Langer, L. Kienle, G. Jakob, B. Borie, et al.

    This study reports the effects of post-growth He+ irradiation on the magneto-elastic properties of a Ni/Fe multi-layered stack. The progressive intermixing caused by He+ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He+ fluences and even to induce a reversal of the sign of the magnetostrictive effect. Additionally, the critical fluence at which the absolute value of the magnetostriction is dramatically reduced is identified. Therefore, insensitivity to strain of the magnetic stack is nearly reached, as required for many applications. All the above-mentioned effects are attributed to the combination of the negative saturation magnetostriction of sputtered Ni and Fe layers and the positive magnetostriction of the NixFe1−x alloy at the intermixed interfaces, whose contribution is gradually increased with irradiation. Importantly, the irradiation does not alter the layer polycrystalline structure, confirming that post-growth He+ ion irradiation is an excellent tool to tune the magneto-elastic properties of multilayer samples. An alternative class of spintronic devices can be envisioned with a material treatment able to arbitrary change the magnetostriction with ion-induced “magnetic patterning.”


  • Key Points in the Determination of the Interfacial Dzyaloshinskii–Moriya Interaction From Asymmetric Bubble Domain Expansion

    by A. Magni, G. Carlotti, A. Casiraghi, E. Darwin, G. Durin, L. Herrera Diez, B. J. Hickey, A. Huxtable, C. Y. Hwang, G. Jakob, et al.

    Different models have been used to evaluate the interfacial Dzyaloshinskii-Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity profile when the DW roughness is high. Our results demonstrate that the DW roughness and the interface roughness of the sample layers are correlated. Furthermore, we give guidance on how to obtain reliable results for the DMI value with this popular method. A comparison of the results with Brillouin light scattering (BLS) measurements on the same samples shows that the BLS approach often results in higher measured values of DMI.


  • Size-dependent enhancement of passive microwave rectification in magnetic tunnel junctions with perpendicular magnetic anisotropy

    by A. Sidi El Valli, V. Iurchuk, G. Lezier, I. Bendjeddou, R. Lebrun, N. Lamard, A. Litvinenko, J. Langer, J. Wrona, L. Vila, et al.

    Spintronic rf detectors are efficient nanoscale counterparts to conventional semiconductor-based components for energy harvesting and wireless communication at low input power. Here, we report on the optimization of the rectified output dc voltage using magnetic tunnel junctions (MTJs) with strong perpendicular anisotropy of both the polarizing and free layers. The magnetization of the polarizing layer is fixed out-of-plane, while the free layer thickness is adjusted so that its magnetization orientation changes from in-plane to out-of-plane. Rectification dc output voltages in the mV range are obtained for moderate rf source powers with a signal-to-noise ratio of 26–39 dB for Prf = −25 dBm and a sensitivity ε of 300 mV/mW. The rectified signal shows a strong dependence on MTJ dimensions: it increases by a factor of 5–6 when reducing the diameter from 180 to 50 nm. Furthermore, this enhancement can be doubled when reducing the free layer thickness from 1.8 to 1.6 nm. This size-related enhancement is attributed to several jointly acting effects: the amplitude of the spin transfer torque that depends inversely on the diameter, the effective anisotropy that depends on the thickness of the excited layer, and the tunneling magneto-resistance ratio that for the devices studied here depends on diameter. The obtained results indicate that the geometry of the MTJ can be used to design spintronic based rf detectors with optimized sensitivity.


  • Angular Harmonic Hall Voltage and Magnetoresistance Measurements of Pt/FeCoB and Pt-Ti/FeCoB Bilayers for Spin Hall Conductivity Determination

    by Witold Skowronski, Krzysztof Grochot, Piotr Rzeszut, Stanislaw Lazarski, Grzegorz Gajoch, Cezary Worek, Jaroslaw Kanak, Tomasz Stobiecki, Jurgen Langer, Berthold Ocker, et al.

    Materials with significant spin-orbit coupling enable efficient spin-to-charge interconversion, which can be utilized in novel spin electronic devices. A number of elements, mainly heavy metals (HMs), have been identified to produce a sizable spin current ( ${j}_{s}$ ), while supplied with a charge current ( ${j}$ ), detected mainly in the neighboring ferromagnetic (FM) layer. Apart from the spin Hall angle $\theta _{\text {SH}}\,\,= {j}_{s}/{j}$ , spin Hall conductivity ( $\sigma _{\text {SH}}$ ) is an important parameter, which takes also the resistivity of the material into account. In this work, we present a measurement protocol of the HM/FM bilayers, which enables for a precise $\sigma _{\text {SH}}$ determination. Static transport measurements, including resistivity and magnetization measurements, are accompanied by the angular harmonic Hall voltage analysis in a dedicated low-noise rotating probe station. Dynamic characterization includes effective magnetization and magnetization damping measurement, which enable HM/FM interface absorption calculation. We validate the measurement protocol in Pt and Pt-Ti underlayers in contact with FeCoB and present $\sigma _{\text {SH}}$ of up to ${3.3}\,\times \,{10}^{{5}}$ S/m, which exceeds the values typically measured in other HM, such as W or Ta.


  • Open Access

    Spin Hall Magnetoresistance and Spin–Orbit Torque Efficiency in Pt/FeCoB Bilayers

    by Alessandro Magni, Vittorio Basso, Alessandro Sola, Gabriel Soares, Nicola Meggiato, Michaela Kuepferling, Witold Skowronski, Stanislaw Lazarski, Krzysztof Grochot, Mehran Vafaee Khanjani, et al.

    The spin Hall magnetoresistance (SMR) of Pt/FeCoB bilayers with in-plane magnetocrystalline anisotropy was analyzed with respect to a second-order effect in the sensing current, which acts, through the spin Hall effect in Pt, as a torque on the magnetization of the ferromagnetic (FM) layer and changes slightly its configuration. This leads to a small current-dependent shift of the SMR curves in field that allows, in structures with a multidomain state (e.g., Hall bars), the determination of the sign of the magnetic remanence. The SMR measurements were performed as a function of the Pt thickness and the spin Hall angle, and the diffusion length and the field-like and damping-like spin–orbit-torque (SOT) efficiency were determined. The results were compared with the values obtained from harmonic Hall voltage and SOT-FM resonance (FMR) measurements and show a good agreement.