Olga Prieto-Ballesteros
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Olga Prieto-Ballesteros has a total of 261 co-authors. Here are the top co-authors by number of shared publications:
- Victoria Muñoz-Iglesias
Centro de Astrobiología (CSIC-INTA), Madrid, Spain
11 shared publications - Andoni Moral
Instituto Nacional de Técnica Aeroespacial (INTA) Madrid Spain
9 shared publications - Heinz-Wilhelm Hübers
German Aerospace Center (DLR), Institute for Space Research and Humboldt-Universitt zu Berlin, Department of Physics, Berlin, Germany
6 shared publications Oscar Ercilla Herrero
6 shared publications- David Carlos Fernández Remolar
SKL Lunar and Planetary Sciences, Macau University of Science and Technology, Macau 999078, China
5 shared publications Fernando Rull
5 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Could CH4 clathrates have formed in the subsurface of Gale Crater?
In situ measurements of atmospheric CH₄ taken by the Curiosity rover in Gale Crater revealed strong seasonal variations in background gas levels (Webster et al. 2018, 2021). Endogenous CH₄ could have been stored in the past in subsurface reservoirs in the form of clathrate hydrates (Prieto-Ballesteros et al. 2006; Chastain and Chevrier 2007; Oehler and Etiope 2017), and remain partially stable in the present-day cryosphere (Gloesener et al. 2021).The stability of clathrates—including their thermodynamic properties and their formation-dissociation kinetics—depends not only on pressure and temperature conditions, but also on the presence of other compounds with which they coexist to form a mineral association, and with which they could interact physically and chemically. Thus, in this research we have reviewed the mineralogy of the Gale Crater subsurface—i.e., the region where clathrates could coexist with other mineral phases—in order to study the stability of CH4 clathrates in such associations.Data from missions to that region suggest that Gale Crater may once have been home to an ancient lake. The crater formed between the late Noachian and early Hesperian periods, while the subsequent formation of the sedimentary strata (composed of clay minerals and sulfate layers) occurred during the Hesperian period (Thomson et al. 2011; Palucis et al. 2014; Grant et al. 2014; Grotzinger et al. 2015). Furthermore, a wide variety of sedimentary layers have been revealed on Mount Sharp that record multiple episodes of ancient aqueous alteration processes (e.g., Achilles et al. 2020), including groundwater activity (Thorpe et al. 2022). In particular, a coexistence of clay minerals and sulfates was found in large quantities in several drill samples collected in the Murray Formation (Bristow et al. 2018) and in the Glen Torridon area (Thorpe et al. 2022).Based on these premises, we experimentally studied the kinetics of CH₄ clathrate formation and dissociation, at pressures up to 100 bar, in the presence of MgSO₄ brines and two clay minerals—a montmorillonite (2:1 type) and a kaolinite (1:1 type)—using high-pressure differential scanning calorimetry (DSC). The results showed that the presence of both sulfates and clay minerals can favor the induction time of clathrate formation, but considerably reduces the final stabilized amount. The salting-out effect caused by the salts and the water strongly bound to the clay surfaces are the main factors that inhibit clathrate growth. These results have important implications for the assessment of potential CH₄ sources in Gale, as the experiments demonstrate the inhibition of clathrate formation within the mineral assemblages found in the crater.References: Achilles et al. 2020, J. Geophys. Res. Planets, 125, e2019JE006295; Bristow et al. 2018, Sci. Adv., 4, eaar3330; Chastain and Chevrier 2007, Planet. Space Sci., 55, 1246 ; Gloesener et al. 2021, Icarus, 353, 114099 ; Grant et al. 2014, Geophys. Res. Lett., 41, 1142 ; Grotzinger et al. 2015, Science, 350, aac7575 ; Oehler and Etiope 2017, Astrobiology, 17, 1233 ; Palucis et al. 2014, J. Geophys. Res. Planets, 119, 705 ; Prieto-Ballesteros et al. 2006, Geology, 34, 149 ; Thomson et al. 2011, Icarus, 214, 413 ; Thorpe et al. 2022, J. Geophys. Res. Planets, 127, e2021JE007099 ; Webster et al. 2018, Science, 360, 1093 ; Webster et al. 2021, A&A, 650, A166Acknowledgements: The authors acknowledge support from the MCIN/AEI/ http://doi.org/10.13039/501100011033 projects PID2022-142490OB-C31, and PCI2023-145992-2, the SOS-Mars project (PID2020-119412RJ-I00) from MICINN Spain, the Marie Curie Postdoctoral Fellowship program (HORIZON-MSCA-2022-PF-01), grant nº 101105979 – SECRECY; and the RYC2024-050522-I grant, funded by MICIU/AEI/10.13039/501100011033 and the ESF+. Part of this work has been conducted at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.
- 2 July 2026
- Published by Copernicus GmbH
Open AccessCould CH4 clathrates have formed in the subsurface of Gale Crater?
In situ measurements of atmospheric CH₄ taken by the Curiosity rover in Gale Crater revealed strong seasonal variations in background gas levels (Webster et al. 2018, 2021). Endogenous CH₄ could have been stored in the past in subsurface reservoirs in the form of clathrate hydrates (Prieto-Ballesteros et al. 2006; Chastain and Chevrier 2007; Oehler and Etiope 2017), and remain partially stable in the present-day cryosphere (Gloesener et al. 2021).The stability of clathrates—including their thermodynamic properties and their formation-dissociation kinetics—depends not only on pressure and temperature conditions, but also on the presence of other compounds with which they coexist to form a mineral association, and with which they could interact physically and chemically. Thus, in this research we have reviewed the mineralogy of the Gale Crater subsurface—i.e., the region where clathrates could coexist with other mineral phases—in order to study the stability of CH4 clathrates in such associations.Data from missions to that region suggest that Gale Crater may once have been home to an ancient lake. The crater formed between the late Noachian and early Hesperian periods, while the subsequent formation of the sedimentary strata (composed of clay minerals and sulfate layers) occurred during the Hesperian period (Thomson et al. 2011; Palucis et al. 2014; Grant et al. 2014; Grotzinger et al. 2015). Furthermore, a wide variety of sedimentary layers have been revealed on Mount Sharp that record multiple episodes of ancient aqueous alteration processes (e.g., Achilles et al. 2020), including groundwater activity (Thorpe et al. 2022). In particular, a coexistence of clay minerals and sulfates was found in large quantities in several drill samples collected in the Murray Formation (Bristow et al. 2018) and in the Glen Torridon area (Thorpe et al. 2022).Based on these premises, we experimentally studied the kinetics of CH₄ clathrate formation and dissociation, at pressures up to 100 bar, in the presence of MgSO₄ brines and two clay minerals—a montmorillonite (2:1 type) and a kaolinite (1:1 type)—using high-pressure differential scanning calorimetry (DSC). The results showed that the presence of both sulfates and clay minerals can favor the induction time of clathrate formation, but considerably reduces the final stabilized amount. The salting-out effect caused by the salts and the water strongly bound to the clay surfaces are the main factors that inhibit clathrate growth. These results have important implications for the assessment of potential CH₄ sources in Gale, as the experiments demonstrate the inhibition of clathrate formation within the mineral assemblages found in the crater.References: Achilles et al. 2020, J. Geophys. Res. Planets, 125, e2019JE006295; Bristow et al. 2018, Sci. Adv., 4, eaar3330; Chastain and Chevrier 2007, Planet. Space Sci., 55, 1246 ; Gloesener et al. 2021, Icarus, 353, 114099 ; Grant et al. 2014, Geophys. Res. Lett., 41, 1142 ; Grotzinger et al. 2015, Science, 350, aac7575 ; Oehler and Etiope 2017, Astrobiology, 17, 1233 ; Palucis et al. 2014, J. Geophys. Res. Planets, 119, 705 ; Prieto-Ballesteros et al. 2006, Geology, 34, 149 ; Thomson et al. 2011, Icarus, 214, 413 ; Thorpe et al. 2022, J. Geophys. Res. Planets, 127, e2021JE007099 ; Webster et al. 2018, Science, 360, 1093 ; Webster et al. 2021, A&A, 650, A166Acknowledgements: The authors acknowledge support from the MCIN/AEI/ http://doi.org/10.13039/501100011033 projects PID2022-142490OB-C31, and PCI2023-145992-2, the SOS-Mars project (PID2020-119412RJ-I00) from MICINN Spain, the Marie Curie Postdoctoral Fellowship program (HORIZON-MSCA-2022-PF-01), grant nº 101105979 – SECRECY; and the RYC2024-050522-I grant, funded by MICIU/AEI/10.13039/501100011033 and the ESF+. Part of this work has been conducted at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.
- Open Access
- 1 May 2026
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 7 (5) , 106
CH 4 -clathrates in Clay Minerals and Sulfate Brines: Application to Gale Crater on Mars
The Curiosity rover uncovered new evidences of fluvial-deltaic deposits at the Gale crater, suggesting the existence of a long-lasting lake in the past. Additional observation of methane (CH 4 ) emanations has led to the idea that the past water-rich environment was also conducive to the stabilization of CH 4 -clathrates in the subsurface. If we consider that one of the possible sources of CH 4 can come from subsurface clathrates, it is crucial to determine whether other secondary minerals coexisting in the underground, such as clay minerals and/or salts, affect their stability. Both clay minerals and salts may affect clathrate thermodynamics and kinetics, as they can decrease gas availability through gas adsorption on clay surfaces or salting-out effects. In this work, we experimentally studied the kinetics of formation and dissociation of CH 4 -clathrates in the presence of MgSO 4 brines and two types of clay minerals, i.e., one montmorillonite (2:1 type), and kaolinite (1:1 type), by differential scanning calorimetry. The results showed that the presence of both sulfates and clay minerals at high concentrations can favor the induction time of clathrate formation, but reduce the final amount of clathrates. Both the salting out effect caused by the salts and the water being strongly bonded to the clay surfaces are the main factors that prevent clathrate growth. These results have important implications for evaluating clathrates as a potential source for the CH 4 detections in Gale, since the experiments demonstrate the inhibition of clathrate crystallization within mineral associations found in the crater.
- 1 May 2026
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 7 (5) , 106
Open AccessCH 4 -clathrates in Clay Minerals and Sulfate Brines: Application to Gale Crater on Mars
The Curiosity rover uncovered new evidences of fluvial-deltaic deposits at the Gale crater, suggesting the existence of a long-lasting lake in the past. Additional observation of methane (CH 4 ) emanations has led to the idea that the past water-rich environment was also conducive to the stabilization of CH 4 -clathrates in the subsurface. If we consider that one of the possible sources of CH 4 can come from subsurface clathrates, it is crucial to determine whether other secondary minerals coexisting in the underground, such as clay minerals and/or salts, affect their stability. Both clay minerals and salts may affect clathrate thermodynamics and kinetics, as they can decrease gas availability through gas adsorption on clay surfaces or salting-out effects. In this work, we experimentally studied the kinetics of formation and dissociation of CH 4 -clathrates in the presence of MgSO 4 brines and two types of clay minerals, i.e., one montmorillonite (2:1 type), and kaolinite (1:1 type), by differential scanning calorimetry. The results showed that the presence of both sulfates and clay minerals at high concentrations can favor the induction time of clathrate formation, but reduce the final amount of clathrates. Both the salting out effect caused by the salts and the water being strongly bonded to the clay surfaces are the main factors that prevent clathrate growth. These results have important implications for evaluating clathrates as a potential source for the CH 4 detections in Gale, since the experiments demonstrate the inhibition of clathrate crystallization within mineral associations found in the crater.
- Open Access
- 6 February 2026
- Published by Springer Nature in Space Science Reviews
- Vol. 222 (1) , 18
Geology and Surface Properties of the Galilean Moons
Over five decades of space exploration have revealed that the Galilean moons—Io, Europa, Ganymede, and Callisto—exhibit a wide spectrum of geological and surface features shaped by the interplay of endogenous and exogenous processes. Each moon displays distinct characteristics: Callisto’s ancient, heavily cratered terrain; Ganymede’s contrasting dark and bright regions; Europa’s extensive fracture networks; and Io’s intense volcanic activity. Their surfaces are primarily composed of water ice mixed with salts, volatiles, and organic compounds, with the exception of Io, and reflect gradients resulting from complex interactions between impact processes, resurfacing mechanisms, and radiation exposure. Surface composition offers valuable clues about potential habitability of subsurface oceans, particularly on Europa, which shows evidence of recent geological activity, liquid water-rock interactions and energy sources. This paper examines how forthcoming data from the Juice and Europa Clipper missions will significantly advance our geological understanding of the moons’ surface environments and their links to the subsurface. By providing high-resolution data and long-term observations from orbit, these missions will help confirm the distribution of subsurface liquid water reservoirs, identify key chemical species—including organics—across surfaces of varying ages, and pinpoint geologically interesting, potentially habitable sites. This information, in addition to laboratory studies or field work, among other efforts will be crucial for designing future in situ exploration to one or more moons or sample return missions, enabling a deeper investigation into the origin and evolution of the Jovian system and the search for signs of life.
- 6 February 2026
- Published by Springer Nature in Space Science Reviews
- Vol. 222 (1) , 18
Open AccessGeology and Surface Properties of the Galilean Moons
Over five decades of space exploration have revealed that the Galilean moons—Io, Europa, Ganymede, and Callisto—exhibit a wide spectrum of geological and surface features shaped by the interplay of endogenous and exogenous processes. Each moon displays distinct characteristics: Callisto’s ancient, heavily cratered terrain; Ganymede’s contrasting dark and bright regions; Europa’s extensive fracture networks; and Io’s intense volcanic activity. Their surfaces are primarily composed of water ice mixed with salts, volatiles, and organic compounds, with the exception of Io, and reflect gradients resulting from complex interactions between impact processes, resurfacing mechanisms, and radiation exposure. Surface composition offers valuable clues about potential habitability of subsurface oceans, particularly on Europa, which shows evidence of recent geological activity, liquid water-rock interactions and energy sources. This paper examines how forthcoming data from the Juice and Europa Clipper missions will significantly advance our geological understanding of the moons’ surface environments and their links to the subsurface. By providing high-resolution data and long-term observations from orbit, these missions will help confirm the distribution of subsurface liquid water reservoirs, identify key chemical species—including organics—across surfaces of varying ages, and pinpoint geologically interesting, potentially habitable sites. This information, in addition to laboratory studies or field work, among other efforts will be crucial for designing future in situ exploration to one or more moons or sample return missions, enabling a deeper investigation into the origin and evolution of the Jovian system and the search for signs of life.
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
The Reference Setup for the RAX Raman Spectrometer on the MMX IDEFIX Rover for Phobos in-situ analysis
Introduction: In late 2026, JAXA will launch the Martian Moons eXploration mission (MMX) towards the Mars system to gain insights into the origin of the two Martian moons, Phobos and Deimos. After a travel time of about a year and another year of observations from orbit, the spacecraft will approach Phobos where it deploys the rover IDEFIX to the moon’s surface to take in-situ measurements. Moreover, the main spacecraft will gather samples (
- 9 July 2025
- Published by Copernicus GmbH
Open AccessThe Reference Setup for the RAX Raman Spectrometer on the MMX IDEFIX Rover for Phobos in-situ analysis
Introduction: In late 2026, JAXA will launch the Martian Moons eXploration mission (MMX) towards the Mars system to gain insights into the origin of the two Martian moons, Phobos and Deimos. After a travel time of about a year and another year of observations from orbit, the spacecraft will approach Phobos where it deploys the rover IDEFIX to the moon’s surface to take in-situ measurements. Moreover, the main spacecraft will gather samples (
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
IDEFIX - The MMX Phobos Rover: One year before launch
IntroductionThe Martian Moon eXploration (MMX) mission by the Japan Aerospace Exploration Agency, JAXA,is going to explore the martian moons Phobos and Deimos. Both moons will be investigated remotely from the mother spacecraft, that will also collect samples from the surface of Phobos. There will also be a small rover, IDEFIX, which will be delivered to Phobos´ surface and make in-situ investigations.The Rover carries a scientific payload of four instruments: RAX, a Raman spectrometer, NavCam, a stereo pair of cameras looking ahead to image the terrain and also support navigation, miniRAD, a radiometer, and two WheelCams looking at the wheel-surface interface, and thus investigating the properties and dynamics of the regolith. The camera pairs will serve for both, technological and scientific needs [1,2].The Rover is a contribution by the Centre National d’Etudes Spatiales (CNES) and the GermanAerospace Center (DLR) with additional contributions from INTA and Univ. Valladolid (Spain) and Univ. Tokyo and JAXA.IDEFIX design and payload The rover with an allocated mass of 29.1 kg, (including the mechanical support system (MECSS) and communications system, which will stay on the main spacecraft) is based on a carbon fiber structure, a locomotion system with four individually controlled wheels and a power system with a solar generator and re-chargeable batteries.The ground segments are established at CNES in Toulouse as well as at DLR in Cologne, Germany. All communications between the rover ground segment and the flight segment are linked via the MMX spacecraft and the JAXA ground segment and ground stations.IDEFIX is accommodating four scientific instruments: Navigation cameras NavCams, looking in front of the rover with a resolution of ~1 mm at 1 m distance. Besides of the scientific use, they are key for navigation and analysis of the rover location, attitude and locomotion. Two WheelCams placed on the underside of the rover each aim at a different rover wheel. The WheelCam images of the surface will be used to characterize the regolith particles (e.g., size distribution, morphological characteristics). The Raman spectrometer RAX is able to analyse the mineralogy on a spot about 8 cm underneath the rover chassis. Heterogeneity of surface grains can be determined and the mineralogy of the material, measured in-situ will complement orbital spectroscopic data and will be important for putting in context the samples which will be returned to Earth.The radiometer miniRAD will investigate the surface temperature and surface thermo-physical properties of Phobos by measuring the radiative flux emitted in the thermal infrared wavelength range. The measurements will also constrain porosity, surface roughness, and emissivity of the surface material.Figure 1 shows the rover design, fully deployed in the on-Phobos configuration. Figure 2 shows the Flight model before integration to the main spacecraft.Fig. 1. IDEFIX in on-Phobos configuration with deployed solar generator (image: CNES) Fig. 2. IDEFIX Flight model shortly before integration to the main spacecraftIDEFIX project status, one year before launchThe IDEFIX rover was delivered to JAXA in February 2024, after undergoing its environmental test program in Europe. It is now attached to the main spacecraft, where tests of the complete MMX system are performed at MELCO in Kamakura. Thermal Vacuum tests have been finalized in spring 2025. The overall test program for IDEFIX is performed both, with the flight model, attached to the MMX spacecraft, but also for operational and planning preparation with a representative “flat rover” at CNES in Toulouse.The launch of MMX is now foreseen for October 2026, arrival at the martian system in 2027 and landing of the rover in late 2028 or early in 2029, after a landing site selection exercise.IDEFIX will be released from an altitude of about 40 m, fall to the surface, upright itself and drive and carry out scientific investigations for about 100 days. References: [1] Michel, P. et al., Earth, Planets and Space, 74:2, 2022; [2] Ulamec, S. et al., Acta Astron., Vol. 210, pp. 95-101, 2023
- 9 July 2025
- Published by Copernicus GmbH
Open AccessIDEFIX - The MMX Phobos Rover: One year before launch
IntroductionThe Martian Moon eXploration (MMX) mission by the Japan Aerospace Exploration Agency, JAXA,is going to explore the martian moons Phobos and Deimos. Both moons will be investigated remotely from the mother spacecraft, that will also collect samples from the surface of Phobos. There will also be a small rover, IDEFIX, which will be delivered to Phobos´ surface and make in-situ investigations.The Rover carries a scientific payload of four instruments: RAX, a Raman spectrometer, NavCam, a stereo pair of cameras looking ahead to image the terrain and also support navigation, miniRAD, a radiometer, and two WheelCams looking at the wheel-surface interface, and thus investigating the properties and dynamics of the regolith. The camera pairs will serve for both, technological and scientific needs [1,2].The Rover is a contribution by the Centre National d’Etudes Spatiales (CNES) and the GermanAerospace Center (DLR) with additional contributions from INTA and Univ. Valladolid (Spain) and Univ. Tokyo and JAXA.IDEFIX design and payload The rover with an allocated mass of 29.1 kg, (including the mechanical support system (MECSS) and communications system, which will stay on the main spacecraft) is based on a carbon fiber structure, a locomotion system with four individually controlled wheels and a power system with a solar generator and re-chargeable batteries.The ground segments are established at CNES in Toulouse as well as at DLR in Cologne, Germany. All communications between the rover ground segment and the flight segment are linked via the MMX spacecraft and the JAXA ground segment and ground stations.IDEFIX is accommodating four scientific instruments: Navigation cameras NavCams, looking in front of the rover with a resolution of ~1 mm at 1 m distance. Besides of the scientific use, they are key for navigation and analysis of the rover location, attitude and locomotion. Two WheelCams placed on the underside of the rover each aim at a different rover wheel. The WheelCam images of the surface will be used to characterize the regolith particles (e.g., size distribution, morphological characteristics). The Raman spectrometer RAX is able to analyse the mineralogy on a spot about 8 cm underneath the rover chassis. Heterogeneity of surface grains can be determined and the mineralogy of the material, measured in-situ will complement orbital spectroscopic data and will be important for putting in context the samples which will be returned to Earth.The radiometer miniRAD will investigate the surface temperature and surface thermo-physical properties of Phobos by measuring the radiative flux emitted in the thermal infrared wavelength range. The measurements will also constrain porosity, surface roughness, and emissivity of the surface material.Figure 1 shows the rover design, fully deployed in the on-Phobos configuration. Figure 2 shows the Flight model before integration to the main spacecraft.Fig. 1. IDEFIX in on-Phobos configuration with deployed solar generator (image: CNES) Fig. 2. IDEFIX Flight model shortly before integration to the main spacecraftIDEFIX project status, one year before launchThe IDEFIX rover was delivered to JAXA in February 2024, after undergoing its environmental test program in Europe. It is now attached to the main spacecraft, where tests of the complete MMX system are performed at MELCO in Kamakura. Thermal Vacuum tests have been finalized in spring 2025. The overall test program for IDEFIX is performed both, with the flight model, attached to the MMX spacecraft, but also for operational and planning preparation with a representative “flat rover” at CNES in Toulouse.The launch of MMX is now foreseen for October 2026, arrival at the martian system in 2027 and landing of the rover in late 2028 or early in 2029, after a landing site selection exercise.IDEFIX will be released from an altitude of about 40 m, fall to the surface, upright itself and drive and carry out scientific investigations for about 100 days. References: [1] Michel, P. et al., Earth, Planets and Space, 74:2, 2022; [2] Ulamec, S. et al., Acta Astron., Vol. 210, pp. 95-101, 2023
- 15 June 2025
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 56 (11) , 1353-1367
Enhancing Operational Efficiency of the Raman Laser Spectrometer (RLS) in the ExoMars Rosalind Franklin Mission: A Comprehensive Qualitative Analysis of Key Parameters in the Sample Acquisition and Measurement Strategies
The Raman Laser Spectrometer (RLS), part of the Pasteur analytical suite onboard the ExoMars 2028 Rosalind Franklin rover, is designed to perform structural and compositional analyses of powdered subsurface samples on Mars. Its fully autonomous operation within the constraints of the Pasteur Analytical Laboratory‐limited by time, energy, and sample availability‐requires an efficient balance between scientific performance and operational viability. This study presents a qualitative analysis of RLS operations under mission‐representative conditions using the Flight Spare (FS) model, focusing on the impact of key parameters‐number of accumulations, autofocus frequency, and analyzed spots per sample‐on the system's detection capabilities. Experimental campaigns were conducted using ESA‐selected analog samples representative of Oxia Planum geology. Performance was evaluated using both the RLS FS and the ExoMars Simulator. Results show high consistency (90‐95%) in mineral detection between systems, confirming the robustness of the RLS FS under representative scenarios. The instrument demonstrated its ability to identify key phases, including oxides, silicates, carbonates, hydrated sulfates, and amorphous carbon, highlighting its relevance to geological and astrobiological investigations. Operational tests confirmed that reducing the number of accumulations or autofocus activations‐under appropriate sample conditions‐does not compromise spectral quality. These findings support a flexible strategy that adapts operational parameters to the scientific context, optimizing resource use and preserving long‐term instrument reliability. The results will contribute to the refinement of nominal activity plans for ExoMars and reinforce the use of the RLS FS as a critical asset for validating future configurations of the flight model.
- 15 June 2025
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 56 (11) , 1353-1367
Enhancing Operational Efficiency of the Raman Laser Spectrometer (RLS) in the ExoMars Rosalind Franklin Mission: A Comprehensive Qualitative Analysis of Key Parameters in the Sample Acquisition and Measurement Strategies
The Raman Laser Spectrometer (RLS), part of the Pasteur analytical suite onboard the ExoMars 2028 Rosalind Franklin rover, is designed to perform structural and compositional analyses of powdered subsurface samples on Mars. Its fully autonomous operation within the constraints of the Pasteur Analytical Laboratory‐limited by time, energy, and sample availability‐requires an efficient balance between scientific performance and operational viability. This study presents a qualitative analysis of RLS operations under mission‐representative conditions using the Flight Spare (FS) model, focusing on the impact of key parameters‐number of accumulations, autofocus frequency, and analyzed spots per sample‐on the system's detection capabilities. Experimental campaigns were conducted using ESA‐selected analog samples representative of Oxia Planum geology. Performance was evaluated using both the RLS FS and the ExoMars Simulator. Results show high consistency (90‐95%) in mineral detection between systems, confirming the robustness of the RLS FS under representative scenarios. The instrument demonstrated its ability to identify key phases, including oxides, silicates, carbonates, hydrated sulfates, and amorphous carbon, highlighting its relevance to geological and astrobiological investigations. Operational tests confirmed that reducing the number of accumulations or autofocus activations‐under appropriate sample conditions‐does not compromise spectral quality. These findings support a flexible strategy that adapts operational parameters to the scientific context, optimizing resource use and preserving long‐term instrument reliability. The results will contribute to the refinement of nominal activity plans for ExoMars and reinforce the use of the RLS FS as a critical asset for validating future configurations of the flight model.
- Open Access
- 9 April 2025
- Published by Elsevier in Acta Astronautica
- Vol. 233, 330-343
The quest for habitats in the outer Solar System and how to protect exotic pristine environments
- 9 April 2025
- Published by Elsevier in Acta Astronautica
- Vol. 233, 330-343
Open AccessThe quest for habitats in the outer Solar System and how to protect exotic pristine environments
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
The Raman Spectrometer RAX on the MMX IDEFIX Rover for in-situ Mineralogical Analysis on Phobos
A compact Raman spectrometer [1] was developed for in-situ science on Phobos with the IDEFIX rover [2], which will be launched as part of JAXA’s Martian Moon eXploration (MMX) mission in 2026. The MMX mission is dedicated to study the two Martian moons, Phobos and Deimos, with the aim of better understanding their origin and evolution [3, 4]. Orbital observations with the main MMX spacecraft and in-situ science on Phobos with the IDEFIX rover will be complemented by returning samples (>10 g) from the surface of Phobos back to Earth. The rover is expected to land between late 2028 and early 2029, in conjunction with the rehearsal for the first landing of the main spacecraft.Figure 1. left: RAX flight model (FM) during thermal vacuum testing at DLR. Right: RAX development model (DM) combined locomotion test with MMX demonstration rover in DLR testbed during a Raman measurement.The RAman spectrometer for MMX (RAX) contributes directly to the high level mission objectives by characterizing the mineral composition of the Phobos surface in-situ, providing ground truth. While different mineral phases can be associated with different formation scenarios (e.g. captured asteroid or major impact) and surface alteration processes on Phobos, the mineralogical information obtained with RAX can also help inform decisions about sampling with the main spacecraft and be compared with data obtained from the returned samples and in-situ data from the surface of Mars. The rover's mobility allows measurements to be taken from multiple positions along the rover's traverse, allowing local variations in composition to be studied. RAX measures down to the ground below the rover. RAX is extremely compact, with a mass of only 1.5 kg and a volume of about 1 dm³. The optical design of RAX was driven by 1) the tight volume and mass constraints available of the small MMX rover and 2) optimizing the collection and detection capabilities of the Raman signal from a sample at several centimeters distance below the rover’s body. Raman excitation (λ = 532 nm, typical optical power on sample 20 mW) is provided by a separate laser module based on the Raman Laser Spectrometer (RLS) laser developed for the Rosalind Franklin rover of the ExoMars mission [5]. The laser emission is transmitted to the RAX Spectrometer Module via a multimode optical fiber with a core diameter of 50 µm. To focus the laser on the Phobos surface below the rover, the spectrometer is equipped with an opto-mechanical autofocus subsystem. It allows fine-tuning of the focus position at a working distance of about 8 cm, within a range of 13 mm and an accuracy of 50 µm. The RAX instrument covers a spectral range of 535 to 680 nm, corresponding to a Raman shift of approximately 90 to 4000 cm−1 and therefore enabling the identification of water-bearing minerals. The spectral resolution across the entire spectral range is about 10 cm−1. To demonstrate the functionality of the RAX instrument after launch and to monitor its performance, a Verification Target (VT) is part of the payload. The VT is a 13 mm diameter pellet made of deuterated polyethylene terephthalate (PET) and was developed and space-qualified specifically for this mission [6]. The VT is placed in the field of view of the RAX instrument and can be measured during the cruise until the rover separates from the MMX spacecraft for landing on Phobos.For a Raman measurement on Phobos, the rover’s locomotion system is needed for the main height adjustment: the rover will gradually lower its body height until the RAX instrument is within its working range. After autofocusing, RAX will measure what is exposed beneath the rover from a footprint of 50 µm. Visual context is provided by the rover’s cameras. To improved data acquisition, Raman data will be collected during Phobos nights.Representing a collaborative effort, RAX is a joint contribution from the German Aerospace Center (DLR), Instituto Nacional de Técnica Aerospacial (INTA), and JAXA. Delivered to the MMX Phobos Rover in August 2022, the RAX flight model was successfully integrated into the IDEFIX rover in October 2022. The flight model of the rover has been delivered to JAXA/MELCO where it is currently being integrated into the main spacecraft for further qualification and functional testing. Operational sequences, e.g. defining the interaction between locomotion and science instruments, are currently being prepared. RAX scientific measurements are being prepared with laboratory studies using the RAX development model. AcknowledgementsMMX is a JAXA mission with contributions from NASA, CNES and DLR. The MMX IDEFIX rover is provided by CNES and DLR. The RAX instrument is a joint development from DLR-OS, INTA/UVa, and JAXA/UTo. The authors thank their respective national funding frameworks including DLR’s Programmatik Raumfahrt and PID2022-142490OB-C31 funded by MCIN/AEI/10.13039/501100011033 and are grateful to the MMX, IDEFIX rover and RAX instrument teams who made this work possible.References[1] T. Hagelschuer, U. Böttger, M. Buder et al., Internat. Astronautical Congress (IAC): 18-22 September, 2022, Proceed. 2022, IAC-22-A3.4A.8. [2] S. Ulamec, P. Michel, M. Grott et al., Acta Astronaut. 2023, 210, 95.[3] T. Usui, K. Bajo, W. Fujiya et al., Space Sci. Rev. 2020, 216, 49.[4] Y. Kawakatsu, K. Kuramoto, T. Usui et al., Acta Astronaut. 2023, 202, 715.[5] F. Rull, S. Maurice, I. Hutchinson et al., Astrobiology 2017, 17, 627.[6] A. G. Moral, J. Mora, O. Prieto-Ballesteros et al., J. Raman Spectrosc. 2023, 54, 1268.
- 3 July 2024
- Published by Copernicus GmbH
Open AccessThe Raman Spectrometer RAX on the MMX IDEFIX Rover for in-situ Mineralogical Analysis on Phobos
A compact Raman spectrometer [1] was developed for in-situ science on Phobos with the IDEFIX rover [2], which will be launched as part of JAXA’s Martian Moon eXploration (MMX) mission in 2026. The MMX mission is dedicated to study the two Martian moons, Phobos and Deimos, with the aim of better understanding their origin and evolution [3, 4]. Orbital observations with the main MMX spacecraft and in-situ science on Phobos with the IDEFIX rover will be complemented by returning samples (>10 g) from the surface of Phobos back to Earth. The rover is expected to land between late 2028 and early 2029, in conjunction with the rehearsal for the first landing of the main spacecraft.Figure 1. left: RAX flight model (FM) during thermal vacuum testing at DLR. Right: RAX development model (DM) combined locomotion test with MMX demonstration rover in DLR testbed during a Raman measurement.The RAman spectrometer for MMX (RAX) contributes directly to the high level mission objectives by characterizing the mineral composition of the Phobos surface in-situ, providing ground truth. While different mineral phases can be associated with different formation scenarios (e.g. captured asteroid or major impact) and surface alteration processes on Phobos, the mineralogical information obtained with RAX can also help inform decisions about sampling with the main spacecraft and be compared with data obtained from the returned samples and in-situ data from the surface of Mars. The rover's mobility allows measurements to be taken from multiple positions along the rover's traverse, allowing local variations in composition to be studied. RAX measures down to the ground below the rover. RAX is extremely compact, with a mass of only 1.5 kg and a volume of about 1 dm³. The optical design of RAX was driven by 1) the tight volume and mass constraints available of the small MMX rover and 2) optimizing the collection and detection capabilities of the Raman signal from a sample at several centimeters distance below the rover’s body. Raman excitation (λ = 532 nm, typical optical power on sample 20 mW) is provided by a separate laser module based on the Raman Laser Spectrometer (RLS) laser developed for the Rosalind Franklin rover of the ExoMars mission [5]. The laser emission is transmitted to the RAX Spectrometer Module via a multimode optical fiber with a core diameter of 50 µm. To focus the laser on the Phobos surface below the rover, the spectrometer is equipped with an opto-mechanical autofocus subsystem. It allows fine-tuning of the focus position at a working distance of about 8 cm, within a range of 13 mm and an accuracy of 50 µm. The RAX instrument covers a spectral range of 535 to 680 nm, corresponding to a Raman shift of approximately 90 to 4000 cm−1 and therefore enabling the identification of water-bearing minerals. The spectral resolution across the entire spectral range is about 10 cm−1. To demonstrate the functionality of the RAX instrument after launch and to monitor its performance, a Verification Target (VT) is part of the payload. The VT is a 13 mm diameter pellet made of deuterated polyethylene terephthalate (PET) and was developed and space-qualified specifically for this mission [6]. The VT is placed in the field of view of the RAX instrument and can be measured during the cruise until the rover separates from the MMX spacecraft for landing on Phobos.For a Raman measurement on Phobos, the rover’s locomotion system is needed for the main height adjustment: the rover will gradually lower its body height until the RAX instrument is within its working range. After autofocusing, RAX will measure what is exposed beneath the rover from a footprint of 50 µm. Visual context is provided by the rover’s cameras. To improved data acquisition, Raman data will be collected during Phobos nights.Representing a collaborative effort, RAX is a joint contribution from the German Aerospace Center (DLR), Instituto Nacional de Técnica Aerospacial (INTA), and JAXA. Delivered to the MMX Phobos Rover in August 2022, the RAX flight model was successfully integrated into the IDEFIX rover in October 2022. The flight model of the rover has been delivered to JAXA/MELCO where it is currently being integrated into the main spacecraft for further qualification and functional testing. Operational sequences, e.g. defining the interaction between locomotion and science instruments, are currently being prepared. RAX scientific measurements are being prepared with laboratory studies using the RAX development model. AcknowledgementsMMX is a JAXA mission with contributions from NASA, CNES and DLR. The MMX IDEFIX rover is provided by CNES and DLR. The RAX instrument is a joint development from DLR-OS, INTA/UVa, and JAXA/UTo. The authors thank their respective national funding frameworks including DLR’s Programmatik Raumfahrt and PID2022-142490OB-C31 funded by MCIN/AEI/10.13039/501100011033 and are grateful to the MMX, IDEFIX rover and RAX instrument teams who made this work possible.References[1] T. Hagelschuer, U. Böttger, M. Buder et al., Internat. Astronautical Congress (IAC): 18-22 September, 2022, Proceed. 2022, IAC-22-A3.4A.8. [2] S. Ulamec, P. Michel, M. Grott et al., Acta Astronaut. 2023, 210, 95.[3] T. Usui, K. Bajo, W. Fujiya et al., Space Sci. Rev. 2020, 216, 49.[4] Y. Kawakatsu, K. Kuramoto, T. Usui et al., Acta Astronaut. 2023, 202, 715.[5] F. Rull, S. Maurice, I. Hutchinson et al., Astrobiology 2017, 17, 627.[6] A. G. Moral, J. Mora, O. Prieto-Ballesteros et al., J. Raman Spectrosc. 2023, 54, 1268.
- Open Access
- 2 May 2024
- Published by Copernicus GmbH
Dielectric properties of binary aqueous systems with sulfates, chlorides, and volatiles for subsurface radar sounding
ESA and NASA will launch two missions to explore the main Galilean moons of Jupiter in the coming years, JUpiter ICy moons Explorer-JUICE and Europa Clipper, respectively. Both missions will be able to determine the distribution of the potential habitable zone in the upper dozens of kilometers of the ice bodies by using onboard radar instruments [Bruzzone et al. 2013, Grasset et al., 2013, Phillips and Pappalardo 2014, Aglyamov et al. 2017]. Considering the possible presence of mixtures of water with salts, volatiles, and clays in the ice and liquid layers, we performed laboratory experiments to obtain the electrical properties of these chemical systems at solid and liquid state, and at different pressure conditions (Table 1). The results that we present at the conference will facilitate the interpretation of the future data received from the radar sensors.We measured the dielectric properties of these samples with a BDS80 Broadband Dielectric Spectroscopy system (Novocontrol), which allows working in a frequency range from 1 Hz to 10 MHz and temperatures from 143 to 323 K. Both, real permittivity (ε´) and electric conductivity (σ) were measured at 0.1 MPa while cooling the samples in temperature steps of 10 K. From these data, we calculated the activation energy and the attenuation of the radar wave depending on the chemical composition, the temperature of the sample, and the frequency of the applied electric field [Petrenko and Whitworth 1999, Pettinelli et al. 2015].Conductivity measurements at high pressure were carried out using a modification of a chamber used previously for planetary simulation experiments (Muñoz-Iglesias et al. 2019). It is based on a stainless steel cylinder, which has different access on the bases and along the main body. Pressurization of the sample is carried out by water or gas from one access at the chamber base, while a sapphire window is at the opposite side for visual control and spectral analysis. Connections throughout the body of the cylinder are for the thermocouple, the pressure gauge and a special one to plug in the electrical sensor. The key feature is the plug for in-situ conductivity measurements with feed through wires connected to the probe, made of two Pt electrodes placed in a PTFE structure in order to maintain the configuration and to ensure the distance between electrodes (around 500 micrometers). Both electrodes have connections to isolated copper wires, which pass through the cell body to be connected to the signal transducer and the computer to record the data. Acknowledgements This work was supported by the ESA contract number 4000126441/19/ES/CM. We thank Anezina Solomonidou for assistance in the project proposal. ReferencesAglyamov et al. (2017) Bright prospects for radar detection of Europa’s ocean, Icarus, 281, 334-337.Bruzzone et al. (2013) RIME: Radar for Icy moon Exploration, IEEE International Geoscience and Remote Sensing Symposium - IGARSS, Melbourne, 3907-3910.Grasset et al. (2013). Jupiter Icy moons explorer (JUICE): an ESA mission to orbit Ganymede and to characterise the Jupiter system. Planet. Space Sci. 78, 1-21Muñoz-Iglesias et al. (2019). Experimental Petrology to Understand Europa's Crust. JGR-Planets 124, 2660-2678Phillips and Pappalardo (2014). Europa Clipper mission concept: exploring Jupiter’s ocean moon. Eos Trans. AGU 95, 165-167.Pettinelli et al. (2015) Dielectric properties of Jovian satellite ice analogs for subsurface radar exploration: A review. Reviews of Geophysics, 53, 593-641.
- 2 May 2024
- Published by Copernicus GmbH
Open AccessDielectric properties of binary aqueous systems with sulfates, chlorides, and volatiles for subsurface radar sounding
ESA and NASA will launch two missions to explore the main Galilean moons of Jupiter in the coming years, JUpiter ICy moons Explorer-JUICE and Europa Clipper, respectively. Both missions will be able to determine the distribution of the potential habitable zone in the upper dozens of kilometers of the ice bodies by using onboard radar instruments [Bruzzone et al. 2013, Grasset et al., 2013, Phillips and Pappalardo 2014, Aglyamov et al. 2017]. Considering the possible presence of mixtures of water with salts, volatiles, and clays in the ice and liquid layers, we performed laboratory experiments to obtain the electrical properties of these chemical systems at solid and liquid state, and at different pressure conditions (Table 1). The results that we present at the conference will facilitate the interpretation of the future data received from the radar sensors.We measured the dielectric properties of these samples with a BDS80 Broadband Dielectric Spectroscopy system (Novocontrol), which allows working in a frequency range from 1 Hz to 10 MHz and temperatures from 143 to 323 K. Both, real permittivity (ε´) and electric conductivity (σ) were measured at 0.1 MPa while cooling the samples in temperature steps of 10 K. From these data, we calculated the activation energy and the attenuation of the radar wave depending on the chemical composition, the temperature of the sample, and the frequency of the applied electric field [Petrenko and Whitworth 1999, Pettinelli et al. 2015].Conductivity measurements at high pressure were carried out using a modification of a chamber used previously for planetary simulation experiments (Muñoz-Iglesias et al. 2019). It is based on a stainless steel cylinder, which has different access on the bases and along the main body. Pressurization of the sample is carried out by water or gas from one access at the chamber base, while a sapphire window is at the opposite side for visual control and spectral analysis. Connections throughout the body of the cylinder are for the thermocouple, the pressure gauge and a special one to plug in the electrical sensor. The key feature is the plug for in-situ conductivity measurements with feed through wires connected to the probe, made of two Pt electrodes placed in a PTFE structure in order to maintain the configuration and to ensure the distance between electrodes (around 500 micrometers). Both electrodes have connections to isolated copper wires, which pass through the cell body to be connected to the signal transducer and the computer to record the data. Acknowledgements This work was supported by the ESA contract number 4000126441/19/ES/CM. We thank Anezina Solomonidou for assistance in the project proposal. ReferencesAglyamov et al. (2017) Bright prospects for radar detection of Europa’s ocean, Icarus, 281, 334-337.Bruzzone et al. (2013) RIME: Radar for Icy moon Exploration, IEEE International Geoscience and Remote Sensing Symposium - IGARSS, Melbourne, 3907-3910.Grasset et al. (2013). Jupiter Icy moons explorer (JUICE): an ESA mission to orbit Ganymede and to characterise the Jupiter system. Planet. Space Sci. 78, 1-21Muñoz-Iglesias et al. (2019). Experimental Petrology to Understand Europa's Crust. JGR-Planets 124, 2660-2678Phillips and Pappalardo (2014). Europa Clipper mission concept: exploring Jupiter’s ocean moon. Eos Trans. AGU 95, 165-167.Pettinelli et al. (2015) Dielectric properties of Jovian satellite ice analogs for subsurface radar exploration: A review. Reviews of Geophysics, 53, 593-641.
- Open Access
- 2 May 2024
- Published by Copernicus GmbH
Characterization of NH4-montmorillonite coexisting with NH4Cl salt at different aggregation states. Application to Ceres.
Ceres, dwarf planet of the main asteroid belt, is considered a relic ocean world since the Dawn mission discovered evidences of aqueous alteration and cryovolcanic activity [1]. Unexpectedly, a variety of ammonium-rich minerals were identified on its surface, including phyllosilicates, carbonates, and chlorides [2]. Although from the Dawn’s VIR spectroscopic data it was not possible to specify the exact type of phyllosilicates observed, montmorillonite is considered a good candidate owing to its ability to incorporate NH4+ in its interlayers [3]. Ammonium-rich phases are usually found at greater distances from the Sun. Hence, the study on their stability at environmental conditions relevant to Ceres’ interior and of its regolith can help elucidate certain ambiguities concerning the provenance of its precursor materials.In this study, it was investigated the changes in the spectroscopic signatures of the clay mineral montmorillonite after (a) being immersed in ammonium chloride aqueous solution and, subsequently, (b) washed with deionized water. After each treatment, samples were submitted to different environmental conditions relevant to the surface of Ceres. For one experiment, they were frozen overnight at 193 K, and then subjected to 10-5 bar for up to 4 days in a Telstar Cryodos lyophilizer. For the other, they were placed inside the Planetary Atmospheres and Surfaces Chamber (PASC) [4] for 1 day at 100 K and 5.10-8 bar. The combination of different techniques, i.e., Raman and IR spectroscopies, XRD, and SEM/EDX, assisted the assignment of the bands to each particular molecule. In this regard, the signatures of the mineral external surface were distinguished from the interlayered NH4+ cations. The degree of compaction of the samples resulted crucial on their stability and spectroscopic response, being stiff smectites more resistant to low temperatures and vacuum conditions. In ground clay minerals, a decrease in the basal space with a redshift of the interlayered NH4+ IR band was measured after just 1 day of being exposed to vacuum conditions.AcknowledgmentsThis work was supported by the Spanish MINECO projects ESP2017-89053-C2-1-P and PID2019-107442RB-C32, and the AEI project MDM‐2017‐0737 Unidad de Excelencia “María de Maeztu”.References[1] De Sanctis et al., Space Sci. Rev. 216, 60, 2020[2] Raponi et al., Icarus 320, 83, 2019[3] Borden and Giese, Clays Clay Miner. 49, 444, 2001[4] Mateo-Marti et al., Life 9, 72, 2019
- 2 May 2024
- Published by Copernicus GmbH
Open AccessCharacterization of NH4-montmorillonite coexisting with NH4Cl salt at different aggregation states. Application to Ceres.
Ceres, dwarf planet of the main asteroid belt, is considered a relic ocean world since the Dawn mission discovered evidences of aqueous alteration and cryovolcanic activity [1]. Unexpectedly, a variety of ammonium-rich minerals were identified on its surface, including phyllosilicates, carbonates, and chlorides [2]. Although from the Dawn’s VIR spectroscopic data it was not possible to specify the exact type of phyllosilicates observed, montmorillonite is considered a good candidate owing to its ability to incorporate NH4+ in its interlayers [3]. Ammonium-rich phases are usually found at greater distances from the Sun. Hence, the study on their stability at environmental conditions relevant to Ceres’ interior and of its regolith can help elucidate certain ambiguities concerning the provenance of its precursor materials.In this study, it was investigated the changes in the spectroscopic signatures of the clay mineral montmorillonite after (a) being immersed in ammonium chloride aqueous solution and, subsequently, (b) washed with deionized water. After each treatment, samples were submitted to different environmental conditions relevant to the surface of Ceres. For one experiment, they were frozen overnight at 193 K, and then subjected to 10-5 bar for up to 4 days in a Telstar Cryodos lyophilizer. For the other, they were placed inside the Planetary Atmospheres and Surfaces Chamber (PASC) [4] for 1 day at 100 K and 5.10-8 bar. The combination of different techniques, i.e., Raman and IR spectroscopies, XRD, and SEM/EDX, assisted the assignment of the bands to each particular molecule. In this regard, the signatures of the mineral external surface were distinguished from the interlayered NH4+ cations. The degree of compaction of the samples resulted crucial on their stability and spectroscopic response, being stiff smectites more resistant to low temperatures and vacuum conditions. In ground clay minerals, a decrease in the basal space with a redshift of the interlayered NH4+ IR band was measured after just 1 day of being exposed to vacuum conditions.AcknowledgmentsThis work was supported by the Spanish MINECO projects ESP2017-89053-C2-1-P and PID2019-107442RB-C32, and the AEI project MDM‐2017‐0737 Unidad de Excelencia “María de Maeztu”.References[1] De Sanctis et al., Space Sci. Rev. 216, 60, 2020[2] Raponi et al., Icarus 320, 83, 2019[3] Borden and Giese, Clays Clay Miner. 49, 444, 2001[4] Mateo-Marti et al., Life 9, 72, 2019