Davide Caprini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Davide Caprini has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Carlo Massimo Casciola
Dipartimento di Ingegneria Meccanica e Aerospaziale, Sapienza Università di Roma, Rome, Italy
3 shared publications - Pierdomenico Lorusso
ENEA, Nuclear Department, TES Laboratory, Frascati, Italy
3 shared publications - Selanna Roccella
ENEA, Nuclear Department, TES Laboratory, Frascati, Italy
3 shared publications - Francesco Crea
ENEA, Nuclear Department, TES Laboratory, Frascati, Italy
2 shared publications - Giancarlo Ruocco
Sapienza Università di Roma
2 shared publications - Giorgia Sinibaldi
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Via Eudossiana 18, 00186 Roma, Italy
2 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1)
Tuning ionic and electronic conduction of PEDOT:PSS:Nafion complexes towards artificial synapses with tailored memory retention
- 10 July 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1)
Open AccessTuning ionic and electronic conduction of PEDOT:PSS:Nafion complexes towards artificial synapses with tailored memory retention
- 5 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2716-2722
DEMO Divertor Target Mock-Ups With Tungsten-Fiber-Reinforced Tungsten Monoblocks
Within the EUROfusion Consortium, in the context of the workpackage materials (WPMATs), tungsten-fiber-reinforced tungsten composite (Wf/W) materials have been developed to overcome the intrinsic brittleness of pure W as a potential plasma-facing material (PFM) for the European demonstration fusion power plant (EU-DEMO). Wf/W materials have shown improved fracture toughness and increased ductility, reducing crack propagation by exhibiting a pseudo-ductile behavior. Such “pseudo-ductility” is generated by the interaction between the W fibers and the W matrix by means of energy-dissipation mechanisms. Among the different types of Wf/W materials, aligned long fibers Wf/Ws have shown improved strength and reinforcement effect compared to short fibers Wf/Ws. At the special technologies laboratories of enea frascati (ENEA-TES), Wf/W monoblocks with different characteristics have been used to fabricate mock-ups of the current divertor target for ITER, which foresees W monoblocks joined to CuCrZr ITER-grade (CuCrZr-IG) cooling pipes by hot radial pressing (HRP) with an oxygen-free copper (OFC, Cu) interlayer manufactured by casting. In order to assess the quality of the fabrication processes, nondestructive examination (NDE) by ultrasonic testing (UT) has been performed. For the mock-up with aligned long fiber Wf/W (L-Wf/W) monoblocks, the fabrication assessment was positively concluded, except for defects which can be overcome with a proper tuning of the manufacturing processes. Further studies such as mock-up HHF test will show if Wf/W is a promising PFM candidate for the EU-DEMO divertor targets.
- 5 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2716-2722
DEMO Divertor Target Mock-Ups With Tungsten-Fiber-Reinforced Tungsten Monoblocks
Within the EUROfusion Consortium, in the context of the workpackage materials (WPMATs), tungsten-fiber-reinforced tungsten composite (Wf/W) materials have been developed to overcome the intrinsic brittleness of pure W as a potential plasma-facing material (PFM) for the European demonstration fusion power plant (EU-DEMO). Wf/W materials have shown improved fracture toughness and increased ductility, reducing crack propagation by exhibiting a pseudo-ductile behavior. Such “pseudo-ductility” is generated by the interaction between the W fibers and the W matrix by means of energy-dissipation mechanisms. Among the different types of Wf/W materials, aligned long fibers Wf/Ws have shown improved strength and reinforcement effect compared to short fibers Wf/Ws. At the special technologies laboratories of enea frascati (ENEA-TES), Wf/W monoblocks with different characteristics have been used to fabricate mock-ups of the current divertor target for ITER, which foresees W monoblocks joined to CuCrZr ITER-grade (CuCrZr-IG) cooling pipes by hot radial pressing (HRP) with an oxygen-free copper (OFC, Cu) interlayer manufactured by casting. In order to assess the quality of the fabrication processes, nondestructive examination (NDE) by ultrasonic testing (UT) has been performed. For the mock-up with aligned long fiber Wf/W (L-Wf/W) monoblocks, the fabrication assessment was positively concluded, except for defects which can be overcome with a proper tuning of the manufacturing processes. Further studies such as mock-up HHF test will show if Wf/W is a promising PFM candidate for the EU-DEMO divertor targets.
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2737-2743
DEMO Divertor Target Mock-Ups With K-Doped Tungsten Laminates Monoblocks
Tungsten (W) is the preferred plasma-facing material (PFM) for European demonstration fusion power plant (EU-DEMO) divertor target. At plasma operative conditions, such as high temperatures, high heat fluxes (HHFs), particle fluxes, and neutron irradiation, W is subject to recrystallization and to embrittlement. A proper doping of W with Potassium (K) can help improve the PFM properties. Nano K-bubbles dispersed at the grain boundaries of W can increase mechanical resistance by hindering grain growth, ultimately leading to the suppression of recrystallization. Newly developed K-doped W laminates (KdWLs) materials were produced by the National Institute of Materials Physics (NIMPs) by means of the field-assisted sintering technique (FAST). At the Special Technologies Laboratories of ENEA Frascati (ENEA-TES), water-cooled ITER-like divertor target mock-ups equipped with KdWL monoblocks were fabricated. The KdWL monoblocks were joined to CuCrZr International Thermonuclear Experimental Reactor (ITER) grade (CuCrZr-IG) cooling pipes by hot radial pressing (HRP) with an oxygen-free copper (OFC, Cu) interlayer manufactured by casting. Nondestructive examination (NDE) by ultrasonic inspection has been performed to assess the quality of the fabrication process and to analyze the structural integrity of the KdWL mock-up after HHF tests. The recent research activity is evaluating whether KdWL can represent a potential candidate armor material for a future water-cooled EU-DEMO divertor target. A dedicated qualification activity of the KdWL divertor target design is currently ongoing, and a mock-up has been produced to withstand cyclic loading up to 2000 cycles at 20 MW/m2. In this work, new KdWL monoblocks were obtained following the optimization of the fabrication process. These monoblocks have been used to fabricate two new divertor target mock-ups to be tested, respectively, at thermal fatigue and overload.
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2737-2743
DEMO Divertor Target Mock-Ups With K-Doped Tungsten Laminates Monoblocks
Tungsten (W) is the preferred plasma-facing material (PFM) for European demonstration fusion power plant (EU-DEMO) divertor target. At plasma operative conditions, such as high temperatures, high heat fluxes (HHFs), particle fluxes, and neutron irradiation, W is subject to recrystallization and to embrittlement. A proper doping of W with Potassium (K) can help improve the PFM properties. Nano K-bubbles dispersed at the grain boundaries of W can increase mechanical resistance by hindering grain growth, ultimately leading to the suppression of recrystallization. Newly developed K-doped W laminates (KdWLs) materials were produced by the National Institute of Materials Physics (NIMPs) by means of the field-assisted sintering technique (FAST). At the Special Technologies Laboratories of ENEA Frascati (ENEA-TES), water-cooled ITER-like divertor target mock-ups equipped with KdWL monoblocks were fabricated. The KdWL monoblocks were joined to CuCrZr International Thermonuclear Experimental Reactor (ITER) grade (CuCrZr-IG) cooling pipes by hot radial pressing (HRP) with an oxygen-free copper (OFC, Cu) interlayer manufactured by casting. Nondestructive examination (NDE) by ultrasonic inspection has been performed to assess the quality of the fabrication process and to analyze the structural integrity of the KdWL mock-up after HHF tests. The recent research activity is evaluating whether KdWL can represent a potential candidate armor material for a future water-cooled EU-DEMO divertor target. A dedicated qualification activity of the KdWL divertor target design is currently ongoing, and a mock-up has been produced to withstand cyclic loading up to 2000 cycles at 20 MW/m2. In this work, new KdWL monoblocks were obtained following the optimization of the fabrication process. These monoblocks have been used to fabricate two new divertor target mock-ups to be tested, respectively, at thermal fatigue and overload.
- 22 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2723-2728
Conceptualization of Multipurpose Testing Facility for Advanced Fluid Dynamics Investigations in Tokamak Divertor Modules
A novel testing facility is being conceptualized to experimentally support the development of prototypical components for divertors in tokamak fusion reactors. The facility will be conceived to operate in a wide range of operating conditions, with the capability to reach high pressure (up to 150bar) and high temperature (up to $250~^{\circ }$ C) conditions, enabling rigorous testing of the fluid dynamics and mechanical behavior of components. The primary focus of the facility will be the investigation of fluid dynamics, particularly around swirl flows and within the targets of plasma-facing units (PFUs). With the use of advanced diagnostic tools, including tomographic particle image velocimetry (Tomo-PIV) system, the facility will enable in-depth analysis of fluid flow behaviors. This will provide valuable insights into how fluids interact with complex geometries, helping to optimize the thermo-fluid dynamic performance of fusion reactor in-vessel components. In addition, the facility will support experimental campaigns focused on vibration and fluid–structure interaction (FSI) analysis. Flow-induced vibrations are critical factors that could potentially limit the service life of key in-vessel components in a nuclear fusion reactor, particularly those involved in the heat extraction system (e.g., the first wall, divertor, etc.). By employing high-sensitivity measurement systems, both contact (accelerometers) and noncontact laser Doppler vibrometer (LDV), the facility will enable the measurement and subsequent analysis of the vibrational spectrum and the dynamic interaction between fluids and solid structures (e.g., pipe-fluid-swirl) under various operating conditions, as well as the vibrational characterization of the components through experimental and operational modal analysis (EMA and OMA). These insights will enhance understanding of the mechanical stability and dynamic response of the components, contributing to their reliability and longevity. With its combination of cutting-edge diagnostic tools and experimental versatility, the facility will play a pivotal role in advancing research in fluid dynamics and structural mechanics for fusion technologies. The integration of these experimental techniques into a unified platform will foster interdisciplinary collaboration and enhance the efficiency of research efforts.
- 22 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2723-2728
Conceptualization of Multipurpose Testing Facility for Advanced Fluid Dynamics Investigations in Tokamak Divertor Modules
A novel testing facility is being conceptualized to experimentally support the development of prototypical components for divertors in tokamak fusion reactors. The facility will be conceived to operate in a wide range of operating conditions, with the capability to reach high pressure (up to 150bar) and high temperature (up to $250~^{\circ }$ C) conditions, enabling rigorous testing of the fluid dynamics and mechanical behavior of components. The primary focus of the facility will be the investigation of fluid dynamics, particularly around swirl flows and within the targets of plasma-facing units (PFUs). With the use of advanced diagnostic tools, including tomographic particle image velocimetry (Tomo-PIV) system, the facility will enable in-depth analysis of fluid flow behaviors. This will provide valuable insights into how fluids interact with complex geometries, helping to optimize the thermo-fluid dynamic performance of fusion reactor in-vessel components. In addition, the facility will support experimental campaigns focused on vibration and fluid–structure interaction (FSI) analysis. Flow-induced vibrations are critical factors that could potentially limit the service life of key in-vessel components in a nuclear fusion reactor, particularly those involved in the heat extraction system (e.g., the first wall, divertor, etc.). By employing high-sensitivity measurement systems, both contact (accelerometers) and noncontact laser Doppler vibrometer (LDV), the facility will enable the measurement and subsequent analysis of the vibrational spectrum and the dynamic interaction between fluids and solid structures (e.g., pipe-fluid-swirl) under various operating conditions, as well as the vibrational characterization of the components through experimental and operational modal analysis (EMA and OMA). These insights will enhance understanding of the mechanical stability and dynamic response of the components, contributing to their reliability and longevity. With its combination of cutting-edge diagnostic tools and experimental versatility, the facility will play a pivotal role in advancing research in fluid dynamics and structural mechanics for fusion technologies. The integration of these experimental techniques into a unified platform will foster interdisciplinary collaboration and enhance the efficiency of research efforts.
- Open Access
- 14 June 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 219
Hydraulic analysis of the DTT divertor module
- 14 June 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 219
Open AccessHydraulic analysis of the DTT divertor module
- Open Access
- 15 February 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (4) , 2147
Detection of Pathological Markers of Neurodegenerative Diseases following Microfluidic Direct Conversion of Patient Fibroblasts into Neurons
Neurodegenerative diseases such as Alzheimer’s disease and Parkinson’s disease are clinically diagnosed using neuropsychological and cognitive tests, expensive neuroimaging-based approaches (MRI and PET) and invasive and time-consuming lumbar puncture for cerebrospinal fluid (CSF) sample collection to detect biomarkers. Thus, a rapid, simple and cost-effective approach to more easily access fluids and tissues is in great need. Here, we exploit the chemical direct reprogramming of patient skin fibroblasts into neurons (chemically induced neurons, ciNs) as a novel strategy for the rapid detection of different pathological markers of neurodegenerative diseases. We found that FAD fibroblasts have a reduced efficiency of reprogramming, and converted ciNs show a less complex neuronal network. In addition, ciNs from patients show misfolded protein accumulation and mitochondria ultrastructural abnormalities, biomarkers commonly associated with neurodegeneration. Moreover, for the first time, we show that microfluidic technology, in combination with chemical reprogramming, enables on-chip examination of disease pathological processes and may have important applications in diagnosis. In conclusion, ciNs on microfluidic devices represent a small-scale, non-invasive and cost-effective high-throughput tool for protein misfolding disease diagnosis and may be useful for new biomarker discovery, disease mechanism studies and design of personalised therapies.
- 15 February 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (4) , 2147
Open AccessDetection of Pathological Markers of Neurodegenerative Diseases following Microfluidic Direct Conversion of Patient Fibroblasts into Neurons
Neurodegenerative diseases such as Alzheimer’s disease and Parkinson’s disease are clinically diagnosed using neuropsychological and cognitive tests, expensive neuroimaging-based approaches (MRI and PET) and invasive and time-consuming lumbar puncture for cerebrospinal fluid (CSF) sample collection to detect biomarkers. Thus, a rapid, simple and cost-effective approach to more easily access fluids and tissues is in great need. Here, we exploit the chemical direct reprogramming of patient skin fibroblasts into neurons (chemically induced neurons, ciNs) as a novel strategy for the rapid detection of different pathological markers of neurodegenerative diseases. We found that FAD fibroblasts have a reduced efficiency of reprogramming, and converted ciNs show a less complex neuronal network. In addition, ciNs from patients show misfolded protein accumulation and mitochondria ultrastructural abnormalities, biomarkers commonly associated with neurodegeneration. Moreover, for the first time, we show that microfluidic technology, in combination with chemical reprogramming, enables on-chip examination of disease pathological processes and may have important applications in diagnosis. In conclusion, ciNs on microfluidic devices represent a small-scale, non-invasive and cost-effective high-throughput tool for protein misfolding disease diagnosis and may be useful for new biomarker discovery, disease mechanism studies and design of personalised therapies.
- Open Access
- 8 October 2021
- Published by Oxford University Press (OUP) in Human Molecular Genetics
- Vol. 31 (6) , 929-941
Caenorhabditis elegans provides an efficient drug screening platform for GNAO1-related disorders and highlights the potential role of caffeine in controlling dyskinesia
Dominant GNAO1 mutations cause an emerging group of childhood-onset neurological disorders characterized by developmental delay, intellectual disability, movement disorders, drug-resistant seizures and neurological deterioration. GNAO1 encodes the α-subunit of an inhibitory GTP/GDP-binding protein regulating ion channel activity and neurotransmitter release. The pathogenic mechanisms underlying GNAO1-related disorders remain largely elusive and there are no effective therapies. Here, we assessed the functional impact of two disease-causing variants associated with distinct clinical features, c.139A > G (p.S47G) and c.662C > A (p.A221D), using Caenorhabditis elegans as a model organism. The c.139A > G change was introduced into the orthologous position of the C. elegans gene via CRISPR/Cas9, whereas a knock-in strain carrying the p.A221D variant was already available. Like null mutants, homozygous knock-in animals showed increased egg laying and were hypersensitive to aldicarb, an inhibitor of acetylcholinesterase, suggesting excessive neurotransmitter release by different classes of motor neurons. Automated analysis of C. elegans locomotion indicated that goa-1 mutants move faster than control animals, with more frequent body bends and a higher reversal rate and display uncoordinated locomotion. Phenotypic profiling of heterozygous animals revealed a strong hypomorphic effect of both variants, with a partial dominant-negative activity for the p.A221D allele. Finally, caffeine was shown to rescue aberrant motor function in C. elegans harboring the goa-1 variants; this effect is mainly exerted through adenosine receptor antagonism. Overall, our findings establish a suitable platform for drug discovery, which may assist in accelerating the development of new therapies for this devastating condition, and highlight the potential role of caffeine in controlling GNAO1-related dyskinesia.
- 8 October 2021
- Published by Oxford University Press (OUP) in Human Molecular Genetics
- Vol. 31 (6) , 929-941
Open AccessCaenorhabditis elegans provides an efficient drug screening platform for GNAO1-related disorders and highlights the potential role of caffeine in controlling dyskinesia
Dominant GNAO1 mutations cause an emerging group of childhood-onset neurological disorders characterized by developmental delay, intellectual disability, movement disorders, drug-resistant seizures and neurological deterioration. GNAO1 encodes the α-subunit of an inhibitory GTP/GDP-binding protein regulating ion channel activity and neurotransmitter release. The pathogenic mechanisms underlying GNAO1-related disorders remain largely elusive and there are no effective therapies. Here, we assessed the functional impact of two disease-causing variants associated with distinct clinical features, c.139A > G (p.S47G) and c.662C > A (p.A221D), using Caenorhabditis elegans as a model organism. The c.139A > G change was introduced into the orthologous position of the C. elegans gene via CRISPR/Cas9, whereas a knock-in strain carrying the p.A221D variant was already available. Like null mutants, homozygous knock-in animals showed increased egg laying and were hypersensitive to aldicarb, an inhibitor of acetylcholinesterase, suggesting excessive neurotransmitter release by different classes of motor neurons. Automated analysis of C. elegans locomotion indicated that goa-1 mutants move faster than control animals, with more frequent body bends and a higher reversal rate and display uncoordinated locomotion. Phenotypic profiling of heterozygous animals revealed a strong hypomorphic effect of both variants, with a partial dominant-negative activity for the p.A221D allele. Finally, caffeine was shown to rescue aberrant motor function in C. elegans harboring the goa-1 variants; this effect is mainly exerted through adenosine receptor antagonism. Overall, our findings establish a suitable platform for drug discovery, which may assist in accelerating the development of new therapies for this devastating condition, and highlight the potential role of caffeine in controlling GNAO1-related dyskinesia.
- Open Access
- 22 August 2021
- Published by Wiley in Advanced Biology
- Vol. 5 (9) , 2100927
A Shearless Microfluidic Device Detects a Role in Mechanosensitivity for AWCON Neuron in Caenorhabditis elegans
AWC olfactory neurons are fundamental for chemotaxis toward volatile attractants in Caenorhabditis elegans. Here, it is shown that AWCON responds not only to chemicals but also to mechanical stimuli caused by fluid flow changes in a microfluidic device. The dynamics of calcium events are correlated with the stimulus amplitude. It is further shown that the mechanosensitivity of AWCON neurons has an intrinsic nature rather than a synaptic origin, and the calcium transient response is mediated by TAX‐4 cGMP‐gated cation channel, suggesting the involvement of one or more “odorant” receptors in AWCON mechano‐transduction. In many cases, the responses show plateau properties resembling bistable calcium dynamics where neurons can switch from one stable state to the other. To investigate the unprecedentedly observed mechanosensitivity of AWCON neurons, a novel microfluidic device is designed to minimize the fluid shear flow in the arena hosting the nematodes. Animals in this device show reduced neuronal activation of AWCON neurons. The results observed indicate that the tangential component of the mechanical stress is the main contributor to the mechanosensitivity of AWCON. Furthermore, the microfluidic platform, integrating shearless perfusion and calcium imaging, provides a novel and more controlled solution for in vivo analysis both in micro‐organisms and cultured cells.
- 22 August 2021
- Published by Wiley in Advanced Biology
- Vol. 5 (9) , 2100927
Open AccessA Shearless Microfluidic Device Detects a Role in Mechanosensitivity for AWCON Neuron in Caenorhabditis elegans
AWC olfactory neurons are fundamental for chemotaxis toward volatile attractants in Caenorhabditis elegans. Here, it is shown that AWCON responds not only to chemicals but also to mechanical stimuli caused by fluid flow changes in a microfluidic device. The dynamics of calcium events are correlated with the stimulus amplitude. It is further shown that the mechanosensitivity of AWCON neurons has an intrinsic nature rather than a synaptic origin, and the calcium transient response is mediated by TAX‐4 cGMP‐gated cation channel, suggesting the involvement of one or more “odorant” receptors in AWCON mechano‐transduction. In many cases, the responses show plateau properties resembling bistable calcium dynamics where neurons can switch from one stable state to the other. To investigate the unprecedentedly observed mechanosensitivity of AWCON neurons, a novel microfluidic device is designed to minimize the fluid shear flow in the arena hosting the nematodes. Animals in this device show reduced neuronal activation of AWCON neurons. The results observed indicate that the tangential component of the mechanical stress is the main contributor to the mechanosensitivity of AWCON. Furthermore, the microfluidic platform, integrating shearless perfusion and calcium imaging, provides a novel and more controlled solution for in vivo analysis both in micro‐organisms and cultured cells.
- Open Access
- 3 June 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (6) , 658
A Microfluidic Platform for Cavitation-Enhanced Drug Delivery
An endothelial-lined blood vessel model is obtained in a PDMS (Polydimethylsiloxane) microfluidic system, where vascular endothelial cells are grown under physiological shear stress, allowing -like maturation. This experimental model is employed for enhanced drug delivery studies, aimed at characterising the increase in endothelial permeability upon microbubble-enhanced ultrasound-induced (USMB) cavitation. We developed a multi-step protocol to couple the optical and the acoustic set-ups, thanks to a 3D-printed insonation chamber, provided with direct optical access and a support for the US transducer. Cavitation-induced interendothelial gap opening is then analysed using a customised code that quantifies gap area and the relative statistics. We show that exposure to US in presence of microbubbles significantly increases endothelial permeability and that tissue integrity completely recovers within 45 min upon insonation. This protocol, along with the versatility of the microfluidic platform, allows to quantitatively characterise cavitation-induced events for its potential employment in clinics.
- 3 June 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (6) , 658
Open AccessA Microfluidic Platform for Cavitation-Enhanced Drug Delivery
An endothelial-lined blood vessel model is obtained in a PDMS (Polydimethylsiloxane) microfluidic system, where vascular endothelial cells are grown under physiological shear stress, allowing -like maturation. This experimental model is employed for enhanced drug delivery studies, aimed at characterising the increase in endothelial permeability upon microbubble-enhanced ultrasound-induced (USMB) cavitation. We developed a multi-step protocol to couple the optical and the acoustic set-ups, thanks to a 3D-printed insonation chamber, provided with direct optical access and a support for the US transducer. Cavitation-induced interendothelial gap opening is then analysed using a customised code that quantifies gap area and the relative statistics. We show that exposure to US in presence of microbubbles significantly increases endothelial permeability and that tissue integrity completely recovers within 45 min upon insonation. This protocol, along with the versatility of the microfluidic platform, allows to quantitatively characterise cavitation-induced events for its potential employment in clinics.
- Open Access
- 1 December 2019
- Published by Elsevier in Biophysical Chemistry
- Vol. 255, 106264
Investigation of the binding between olfactory receptors and odorant molecules in C. elegans organism
- 1 December 2019
- Published by Elsevier in Biophysical Chemistry
- Vol. 255, 106264
Open AccessInvestigation of the binding between olfactory receptors and odorant molecules in C. elegans organism