Giorgia Sinibaldi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Giorgia Sinibaldi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Giovanni Paolo Romano
Department Mechanical & Aerospace Engineering, University La Sapienza, 00184 Roma, Italy
3 shared publications - Carlo Massimo Casciola
Dipartimento di Ingegneria Meccanica e Aerospaziale, Sapienza Università di Roma, Rome, Italy
2 shared publications - Davide Caprini
ENEA, Nuclear Department, TES Laboratory, Frascati, Italy
2 shared publications Luca Marino
Dept. of Mech. and Aerosp. Eng., Univ. of Rome La Sapienza, via Eudossiana 18, Rome, Italy
2 shared publications- Agostino Occhicone
Department of Basic and Applied Science for Engineering, Sapienza University of Rome, Via A. Scarpa 16, 00161 Rome, Italy
1 shared publication Antonio Culla
Dept. of Mech. and Aerosp. Eng., Univ. of Rome La Sapienza, via Eudossiana 18, Rome, Italy
1 shared publication
Latest Publications
- Open Access
- 3 June 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (6) , 658
A Microfluidic Platform for Cavitation-Enhanced Drug Delivery
An endothelial-lined blood vessel model is obtained in a PDMS (Polydimethylsiloxane) microfluidic system, where vascular endothelial cells are grown under physiological shear stress, allowing -like maturation. This experimental model is employed for enhanced drug delivery studies, aimed at characterising the increase in endothelial permeability upon microbubble-enhanced ultrasound-induced (USMB) cavitation. We developed a multi-step protocol to couple the optical and the acoustic set-ups, thanks to a 3D-printed insonation chamber, provided with direct optical access and a support for the US transducer. Cavitation-induced interendothelial gap opening is then analysed using a customised code that quantifies gap area and the relative statistics. We show that exposure to US in presence of microbubbles significantly increases endothelial permeability and that tissue integrity completely recovers within 45 min upon insonation. This protocol, along with the versatility of the microfluidic platform, allows to quantitatively characterise cavitation-induced events for its potential employment in clinics.
- 3 June 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (6) , 658
Open AccessA Microfluidic Platform for Cavitation-Enhanced Drug Delivery
An endothelial-lined blood vessel model is obtained in a PDMS (Polydimethylsiloxane) microfluidic system, where vascular endothelial cells are grown under physiological shear stress, allowing -like maturation. This experimental model is employed for enhanced drug delivery studies, aimed at characterising the increase in endothelial permeability upon microbubble-enhanced ultrasound-induced (USMB) cavitation. We developed a multi-step protocol to couple the optical and the acoustic set-ups, thanks to a 3D-printed insonation chamber, provided with direct optical access and a support for the US transducer. Cavitation-induced interendothelial gap opening is then analysed using a customised code that quantifies gap area and the relative statistics. We show that exposure to US in presence of microbubbles significantly increases endothelial permeability and that tissue integrity completely recovers within 45 min upon insonation. This protocol, along with the versatility of the microfluidic platform, allows to quantitatively characterise cavitation-induced events for its potential employment in clinics.
- 1 October 2020
- Published by Elsevier in Experimental Thermal and Fluid Science
- Vol. 118, 110141
Experimental investigation on fluid mechanics of micro-channel heat transfer devices
- 1 October 2020
- Published by Elsevier in Experimental Thermal and Fluid Science
- Vol. 118, 110141
Experimental investigation on fluid mechanics of micro-channel heat transfer devices
- Top Cited PapersOpen Access
- 1 October 2019
- Published by AIP Publishing in Physics of Fluids
- Vol. 31 (10) , 103302
Laser induced cavitation: Plasma generation and breakdown shockwave
Laser induced cavitation is one of the effective techniques to generate controlled cavitation bubbles, both for basic study and for applications in different fields of engineering and medicine. Unfortunately, control of bubble formation and symmetry is hardly achieved due to a series of concurrent causes. In particular, the need to focus the laser beam at the bubble formation spot leads, in general, to a conical region proximal to the light source where conditions are met for plasma breakdown. A finite sized region then exists where the electric field may fluctuate depending on several disturbing agents, leading to possible plasma fragmentation and plasma intensity variation. Such irregularities may induce asymmetry in the successive bubble dynamics, a mostly undesired effect if reproducible conditions are sought for. In the present paper, the structure of the breakdown plasma and the ensuing bubble dynamics are analyzed by means of high speed imaging and intensity measurements of the shockwave system launched at breakdown. It is found that the parameters of the system can be tuned to optimize repeatability and sphericity. In particular, symmetric rebound dynamics is achieved almost deterministically when a pointlike plasma is generated at the breakdown threshold energy. Spherical symmetry is also favored by a large focusing angle combined with a relatively large pulse energy, a process which, however, retains a significant level of stochasticity. Outside these special conditions, the elongated and often fragmented conical plasma shape is found to be correlated with anisotropic and multiple breakdown shockwave emission.
- 1 October 2019
- Published by AIP Publishing in Physics of Fluids
- Vol. 31 (10) , 103302
Top Cited PapersOpen AccessLaser induced cavitation: Plasma generation and breakdown shockwave
Laser induced cavitation is one of the effective techniques to generate controlled cavitation bubbles, both for basic study and for applications in different fields of engineering and medicine. Unfortunately, control of bubble formation and symmetry is hardly achieved due to a series of concurrent causes. In particular, the need to focus the laser beam at the bubble formation spot leads, in general, to a conical region proximal to the light source where conditions are met for plasma breakdown. A finite sized region then exists where the electric field may fluctuate depending on several disturbing agents, leading to possible plasma fragmentation and plasma intensity variation. Such irregularities may induce asymmetry in the successive bubble dynamics, a mostly undesired effect if reproducible conditions are sought for. In the present paper, the structure of the breakdown plasma and the ensuing bubble dynamics are analyzed by means of high speed imaging and intensity measurements of the shockwave system launched at breakdown. It is found that the parameters of the system can be tuned to optimize repeatability and sphericity. In particular, symmetric rebound dynamics is achieved almost deterministically when a pointlike plasma is generated at the breakdown threshold energy. Spherical symmetry is also favored by a large focusing angle combined with a relatively large pulse energy, a process which, however, retains a significant level of stochasticity. Outside these special conditions, the elongated and often fragmented conical plasma shape is found to be correlated with anisotropic and multiple breakdown shockwave emission.
- 1 May 2017
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 141 (5_Suppleme) , 3833
Load identification by coherence analysis of structural response
Aim of this paper is the identification of uncorrelated forces acting on a structure based on a coherence analysis of the structure response, performed entirely in operative condition. In order to identify the position and the amplitude of the applied load only the responses of the structure and the experimental FRF are required. The proposed procedure consists of three steps. First, the number of acting loads is established by the analysis of the responses coherence, second the position of the acting forces is identified using an index obtained by the knowledge of experimental FRF and of the responses of the structure, then, the amplitude of the acting forces is computed in correspondence of the excited points. The procedure is tested by two experiments. First experiment consists in the excitation of a complex structure in several places with an instrumented hammer. The identification is performed by the accelerations measured on a set of points of the structure itself. The second experiment is carried out by exciting a structure with a fluid flow in a wind tunnel. The accelerations of the structure vibrations and the structure-born acoustic noise are measured and used to identify the fluid pressure acting on the structure.
- 1 May 2017
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 141 (5_Suppleme) , 3833
Load identification by coherence analysis of structural response
Aim of this paper is the identification of uncorrelated forces acting on a structure based on a coherence analysis of the structure response, performed entirely in operative condition. In order to identify the position and the amplitude of the applied load only the responses of the structure and the experimental FRF are required. The proposed procedure consists of three steps. First, the number of acting loads is established by the analysis of the responses coherence, second the position of the acting forces is identified using an index obtained by the knowledge of experimental FRF and of the responses of the structure, then, the amplitude of the acting forces is computed in correspondence of the excited points. The procedure is tested by two experiments. First experiment consists in the excitation of a complex structure in several places with an instrumented hammer. The identification is performed by the accelerations measured on a set of points of the structure itself. The second experiment is carried out by exciting a structure with a fluid flow in a wind tunnel. The accelerations of the structure vibrations and the structure-born acoustic noise are measured and used to identify the fluid pressure acting on the structure.
- Open Access
Flow Configurations in a Y Splitting-Junction Microchannel
In the present work, the flow field in a splitting-junction micro channel with a Y shape, which is the simplest geometry to be employed for heat and mass transfer in micro-devices such as micro-heat-exchangers and micro-mixers, is investigated experimentally using micro Particle Image Velocimetry (μPIV). The angular divergence in the Y splitting is changed, as well as the Reynolds number, in order to investigate the instantaneous and mean flow fields to determine which configurations are more suitable for practical applications. The results show that the flow configuration is strongly dependent on the Y shape angle, especially in the junction part, and that there is also a significant dependence on the Reynolds number.
Open AccessFlow Configurations in a Y Splitting-Junction Microchannel
In the present work, the flow field in a splitting-junction micro channel with a Y shape, which is the simplest geometry to be employed for heat and mass transfer in micro-devices such as micro-heat-exchangers and micro-mixers, is investigated experimentally using micro Particle Image Velocimetry (μPIV). The angular divergence in the Y splitting is changed, as well as the Reynolds number, in order to investigate the instantaneous and mean flow fields to determine which configurations are more suitable for practical applications. The results show that the flow configuration is strongly dependent on the Y shape angle, especially in the junction part, and that there is also a significant dependence on the Reynolds number.
- 12 May 2015
- Published by Springer Nature in Experiments in Fluids
- Vol. 56 (5) , 1-14
Sound source mechanisms in under-expanded impinging jets
- 12 May 2015
- Published by Springer Nature in Experiments in Fluids
- Vol. 56 (5) , 1-14
Sound source mechanisms in under-expanded impinging jets