Pedro Henrique Affonso Nóbrega
Research Subjects
Pedro Henrique Affonso Nóbrega has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Robin Girard
MINES Paris, PSL University, Centre PERSEE - Centre for Processes, Renewable Energies and Energy Systems, Paris, France
4 shared publications Christian Beauger
Mines Paris, PSL University
3 shared publications- Anaëlle Jodry
Mines Paris, PSL University, Centre for processes, renewable energy and energy systems (PERSEE), 1 rue Claude Daunesse, Sophia Antipolis, 06904, France
2 shared publications - Christian Beauger
MINES ParisTech, PSL Research University, PERSEE - Centre procédés, énergies renouvelables et systèmes énergétiques, Sophia Antipolis Cedex, France
2 shared publications François Cauneau
MINES ParisTech, PSL Research University, PERSEE—Centre for Processes, Renewable Energy and Energy Systems, CS 10207 rue Claude Daunesse F-06904 Sophia Antipolis Cedex, France
2 shared publications- Laurent Fulcheri
MINES ParisTech, PSL - Research University, PERSEE - Centre procédés, énergies renouvelables et systèmes énergétiques 1 Rue Claude Daunesse, 06904 Sophia Antipolis, France
2 shared publications
Latest Publications
- Open Access
- 22 August 2026
- Published by Elsevier in SSRN Electronic Journal
Mapping the cost-competitiveness of alternative industrial heat supply portfolios: A multi-scale perspective
Heat production accounts for a large share of industrial final energy consumption and remains largely based on natural gas. Despite the availability of mature power-to-heat technologies, their industrial uptake remains limited, highlighting the need to better understand their economic competitiveness across plausible future energy prices and industrial contexts. Accordingly, this study develops a multi-scale sensitivity framework to assess the levelized cost of heat (LCOH) of alternative technology portfolios across future energy-system conditions and industrial-site characteristics. A key novelty is the consistent representation of electricity and methane prices while retaining a detailed representation of the industrial heat-supply system. Results for a chemical facility in France show that hybrid gas–electric portfolios are economically preferred across the investigated parameter space. When the gas boiler is removed, on-site PV generation and thermal energy storage are jointly deployed across most scenarios, substantially improving the competitiveness of full electrification and reducing the LCOH range from 50–125 €/MWh for an electric boiler alone to 47–69 €/MWh. The multi-scale analysis further shows that LCOH remains primarily driven by energy-system conditions, although this dependence weakens as more integrated, capital-intensive portfolios are deployed. This underscores the need to represent methane and electricity prices consistently when assessing industrial electrification. Integrated portfolios, in turn, demonstrate their hedging potential across future energy prices. Finally, contrasting emissions obtained using average and marginal carbon accounting highlight the importance of considering industrial electrification within the broader evolution of the energy system when jointly assessing its economic and environmental implications.
- 22 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMapping the cost-competitiveness of alternative industrial heat supply portfolios: A multi-scale perspective
Heat production accounts for a large share of industrial final energy consumption and remains largely based on natural gas. Despite the availability of mature power-to-heat technologies, their industrial uptake remains limited, highlighting the need to better understand their economic competitiveness across plausible future energy prices and industrial contexts. Accordingly, this study develops a multi-scale sensitivity framework to assess the levelized cost of heat (LCOH) of alternative technology portfolios across future energy-system conditions and industrial-site characteristics. A key novelty is the consistent representation of electricity and methane prices while retaining a detailed representation of the industrial heat-supply system. Results for a chemical facility in France show that hybrid gas–electric portfolios are economically preferred across the investigated parameter space. When the gas boiler is removed, on-site PV generation and thermal energy storage are jointly deployed across most scenarios, substantially improving the competitiveness of full electrification and reducing the LCOH range from 50–125 €/MWh for an electric boiler alone to 47–69 €/MWh. The multi-scale analysis further shows that LCOH remains primarily driven by energy-system conditions, although this dependence weakens as more integrated, capital-intensive portfolios are deployed. This underscores the need to represent methane and electricity prices consistently when assessing industrial electrification. Integrated portfolios, in turn, demonstrate their hedging potential across future energy prices. Finally, contrasting emissions obtained using average and marginal carbon accounting highlight the importance of considering industrial electrification within the broader evolution of the energy system when jointly assessing its economic and environmental implications.
- Open Access
- 18 May 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (11)
A New 0D Physics-Based Model for Proton-Exchange Membrane Fuel Cell Performance Simulation
This paper presents a new physics-based 0D steady-state model for simulating the performance of proton-exchange membrane fuel cells (PEMFC), including phenomena such as temperature gradients, transport of membrane water, liquid water and gases. The model adopts an explicit formulation resulting in extremely low computational times, enabling sensitivity analyses, parameter estimation and cross-validation, to an extent which has not been previously reported for PEMFC models. Validation against polarization curves, high-frequency resistance, crossover current density, and roughness factor measurements for fifteen operating conditions demonstrates very good predictive accuracy. With 18 estimated parameters, the model achieves median root-mean square errors of 14.1 mV and 3.6 mΩ.cm 2 for cell voltage and high-frequency resistances on testing datasets. However, overfitting becomes evident when the number of estimated parameters is increased. Beyond performance prediction, this work underscores the importance of robust parameter estimation and cross-validation in PEMFC modelling. It also highlights the potential of lightweight 0D physics-based models for accurate performance prediction and interpretation of experimental data.
- 18 May 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (11)
Open AccessA New 0D Physics-Based Model for Proton-Exchange Membrane Fuel Cell Performance Simulation
This paper presents a new physics-based 0D steady-state model for simulating the performance of proton-exchange membrane fuel cells (PEMFC), including phenomena such as temperature gradients, transport of membrane water, liquid water and gases. The model adopts an explicit formulation resulting in extremely low computational times, enabling sensitivity analyses, parameter estimation and cross-validation, to an extent which has not been previously reported for PEMFC models. Validation against polarization curves, high-frequency resistance, crossover current density, and roughness factor measurements for fifteen operating conditions demonstrates very good predictive accuracy. With 18 estimated parameters, the model achieves median root-mean square errors of 14.1 mV and 3.6 mΩ.cm 2 for cell voltage and high-frequency resistances on testing datasets. However, overfitting becomes evident when the number of estimated parameters is increased. Beyond performance prediction, this work underscores the importance of robust parameter estimation and cross-validation in PEMFC modelling. It also highlights the potential of lightweight 0D physics-based models for accurate performance prediction and interpretation of experimental data.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Conception et mise au point d’un réacteur plasma innovant pour le traitement de composés organiques volatils en milieu industriel
Des composés organiques volatils (COV) présents dans l'air peuvent avoir un fort impact odorant et doivent être traités. Des techniques de traitement classiques permettent de récupérer ou détruire ces composés. Cependant, ces techniques ne sont pas adaptées aux forts débits d'air et/ou aux faibles concentrations, caractéristiques de certains procédés industriels émetteurs de COV. Une alternative prometteuse est l'utilisation de plasmas non-thermiques. Ce type de plasma, obtenu par des décharges électriques hors-équilibre thermodynamique, contient des espèces réactives qui provoquent la destruction des composés organiques volatils. Cette thèse vise à concevoir, construire et tester un réacteur basé sur des plasmas non-thermiques pour le traitement de COV à l'échelle pilote, afin de démontrer la faisabilité d'un tel procédé pour le traitement d'odeurs présentes dans un effluent industriel. Les résultats obtenus montrent que, couplé à un catalyseur, le traitement d'odeurs par plasma non-thermique a un vrai potentiel d'application à l'échelle industrielle. En parallèle, cette thèse cherche à mieux comprendre le rôle des transferts de masse au sein d'un réacteur à l'aide d'un modèle analytique et de simulations numériques. Nous montrons que ces transferts peuvent devenir le processus limitant dans le traitement, et demandent donc une attention particulière lors du design d'un réacteur basé sur des plasmas non-thermiques.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Conception et mise au point d’un réacteur plasma innovant pour le traitement de composés organiques volatils en milieu industriel
Des composés organiques volatils (COV) présents dans l'air peuvent avoir un fort impact odorant et doivent être traités. Des techniques de traitement classiques permettent de récupérer ou détruire ces composés. Cependant, ces techniques ne sont pas adaptées aux forts débits d'air et/ou aux faibles concentrations, caractéristiques de certains procédés industriels émetteurs de COV. Une alternative prometteuse est l'utilisation de plasmas non-thermiques. Ce type de plasma, obtenu par des décharges électriques hors-équilibre thermodynamique, contient des espèces réactives qui provoquent la destruction des composés organiques volatils. Cette thèse vise à concevoir, construire et tester un réacteur basé sur des plasmas non-thermiques pour le traitement de COV à l'échelle pilote, afin de démontrer la faisabilité d'un tel procédé pour le traitement d'odeurs présentes dans un effluent industriel. Les résultats obtenus montrent que, couplé à un catalyseur, le traitement d'odeurs par plasma non-thermique a un vrai potentiel d'application à l'échelle industrielle. En parallèle, cette thèse cherche à mieux comprendre le rôle des transferts de masse au sein d'un réacteur à l'aide d'un modèle analytique et de simulations numériques. Nous montrons que ces transferts peuvent devenir le processus limitant dans le traitement, et demandent donc une attention particulière lors du design d'un réacteur basé sur des plasmas non-thermiques.
- Open Access
- 23 March 2026
- Published by Elsevier in Energy Policy
- Vol. 214
Resilience analysis for energy foresight scenarios: addressing the deep uncertainties of hydrogen deployment in industrial hubs
- 23 March 2026
- Published by Elsevier in Energy Policy
- Vol. 214
Open AccessResilience analysis for energy foresight scenarios: addressing the deep uncertainties of hydrogen deployment in industrial hubs
- Open Access
- 6 September 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 172
PEMFC cathode humidification: Can direct water injection compete with membrane humifiers? A direct comparison study
- 6 September 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 172
Open AccessPEMFC cathode humidification: Can direct water injection compete with membrane humifiers? A direct comparison study
- Open Access
- 21 August 2025
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 226
Critical review of the latest advances in thermal management techniques for PEM fuel cells
- 21 August 2025
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 226
Open AccessCritical review of the latest advances in thermal management techniques for PEM fuel cells
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (36) , 2058
Investigating the Impact of Air Pollutants on Fuel Cell Performance and Durability: Experimental and Modeling Approaches
Fuel cells hold immense promise as efficient and sustainable power sources for transportation and stationary applications. However, their operation can be severely impacted by air pollutants, particularly sulfur dioxide (SO2) and nitrogen oxides (NOx). These pollutants can adsorb onto the platinum catalyst, leading to a decrease in fuel cell performance and durability. In this study, we investigate the impact of SO2 and NO2 on PEM fuel cell performance and durability. The contamination tests were carried out at a constant current density of 0.5 A.cm−2, and they consisted of four steps: a pre-poisoning step to evaluate initial performance (15-16 h), poisoning step (50 h), self-recovery in a pure air stream (20-21 h) and a driven CV-induced recovery. Electrochemical characterizations were carried out at the end of each step (Polarization curve, Electrochemical Impedance Spectroscopy, Cyclic Voltammetry and H2 Crossover). Our initial investigation involved contaminating a single fuel cell with a low concentration of 0.1 ppm of sulfur dioxide (SO2). Remarkably, this resulted in a 1.1% decrease in cell voltage. Building on this foundation, our ongoing research aims to delve deeper into the impact of individual pollutant concentrations (SO2 and NO2) and their combined effects, considering varying temperatures and current densities to simulate real-world conditions. Simultaneously, a comprehensive model is being developed using Simscape in Matlab. The model accounts for the pollutants either as single-component gases or as a mixture. For single-component gas adsorption, the Langmuir Isotherm model is employed. To capture the competitive adsorption of SO2 and NO2 on platinum in gas mixtures, we are testing the Modified Competitive Langmuir Isotherm Model. The model will further be calibrated and validated using the experimental results. This combined experimental and modeling approach will provide a comprehensive understanding of the impact of air pollutants on fuel cell performance and durability. The insights gained from this study can inform the development of mitigation strategies and enhance the robustness of fuel cells in real-world applications as well as the sizing of a filter. Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (36) , 2058
Investigating the Impact of Air Pollutants on Fuel Cell Performance and Durability: Experimental and Modeling Approaches
Fuel cells hold immense promise as efficient and sustainable power sources for transportation and stationary applications. However, their operation can be severely impacted by air pollutants, particularly sulfur dioxide (SO2) and nitrogen oxides (NOx). These pollutants can adsorb onto the platinum catalyst, leading to a decrease in fuel cell performance and durability. In this study, we investigate the impact of SO2 and NO2 on PEM fuel cell performance and durability. The contamination tests were carried out at a constant current density of 0.5 A.cm−2, and they consisted of four steps: a pre-poisoning step to evaluate initial performance (15-16 h), poisoning step (50 h), self-recovery in a pure air stream (20-21 h) and a driven CV-induced recovery. Electrochemical characterizations were carried out at the end of each step (Polarization curve, Electrochemical Impedance Spectroscopy, Cyclic Voltammetry and H2 Crossover). Our initial investigation involved contaminating a single fuel cell with a low concentration of 0.1 ppm of sulfur dioxide (SO2). Remarkably, this resulted in a 1.1% decrease in cell voltage. Building on this foundation, our ongoing research aims to delve deeper into the impact of individual pollutant concentrations (SO2 and NO2) and their combined effects, considering varying temperatures and current densities to simulate real-world conditions. Simultaneously, a comprehensive model is being developed using Simscape in Matlab. The model accounts for the pollutants either as single-component gases or as a mixture. For single-component gas adsorption, the Langmuir Isotherm model is employed. To capture the competitive adsorption of SO2 and NO2 on platinum in gas mixtures, we are testing the Modified Competitive Langmuir Isotherm Model. The model will further be calibrated and validated using the experimental results. This combined experimental and modeling approach will provide a comprehensive understanding of the impact of air pollutants on fuel cell performance and durability. The insights gained from this study can inform the development of mitigation strategies and enhance the robustness of fuel cells in real-world applications as well as the sizing of a filter. Figure 1
- Top Cited Papers
- 21 September 2023
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 187
Techno-economic evaluation and resource assessment of hydrogen production through offshore wind farms: A European perspective
- 21 September 2023
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 187
Top Cited PapersTechno-economic evaluation and resource assessment of hydrogen production through offshore wind farms: A European perspective
- 9 September 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 426, 138750
Industrial hydrogen hub planning and operation with multi-scale optimisation
- 9 September 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 426, 138750
Industrial hydrogen hub planning and operation with multi-scale optimisation