Zhi-Hong Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhi-Hong Liu has a total of 151 co-authors. Here are the top co-authors by number of shared publications:
- Xiaojun Zhao
School of Metallurgical Engineering Xi'an University of architecture and technology Xi'an 710055 P. R. China
10 shared publications Hu Mancheng
School of Chemistry and Materials Science, Shaanxi Normal University, Xi’an 710062, PR China
8 shared publicationsPing Li
Shaanxi Normal Univ, Sch Chem & Chem Engn, Key Lab Macromol Sci Shaanxi Prov, Xian 710119, Peoples R China
8 shared publicationsTianqi Gao
8 shared publicationsWenzhe Wang
7 shared publicationsSa-Ying Li
Department of Chemistry and Chemical Engineering, Shaanxi Xueqian Normal University, Xi'an, P.R.China
6 shared publications
Latest Publications
- Open Access
- 16 August 2026
- Published by Elsevier in SSRN Electronic Journal
Ru Nanoparticles Decorated NiFe-P Nanosheet Arrays and NiFe-BLDH Nanosheets Loading for Boosting Overall Water Splitting at High Current Density
Developing efficient and durable electrocatalysts capable of operating at high current densities is critical for industrial-scale hydrogen production. Herein, a heterostructured NiFe-BLDH@Ru-NiFe-P/NF nanocomposite is designed and fabricated by sequentially growing NiFe-P nanosheet arrays, electrodepositing Ru NPs, and subsequently loading borate anion intercalated NiFe-BLDH nanosheets on nickel foam. The introduction of Ru NPs markedly enhances the intrinsic HER activity, making Ru-NiFe-P/NF with a low overpotential of 124 mV at 500 mA cm-2. While the NiFe‑BLDH overlayer creates heterointerfaces that induce charge redistribution, optimize intermediate adsorption, and also slows down the corrosion of Ru, delivering outstanding OER activity (364 mV at 500 mA cm-2). When NiFe-BLDH@Ru-NiFe-P/NF as the anode was assembled into an electrolyzer with Ru-NiFe-P/NF as the cathode, a voltage of only 1.94 V is required to deliver 500 mA cm-2 in alkaline simulated seawater (1 M KOH + 1 M NaCl), which operates continuously for 100 h without significant degradation.
- 16 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRu Nanoparticles Decorated NiFe-P Nanosheet Arrays and NiFe-BLDH Nanosheets Loading for Boosting Overall Water Splitting at High Current Density
Developing efficient and durable electrocatalysts capable of operating at high current densities is critical for industrial-scale hydrogen production. Herein, a heterostructured NiFe-BLDH@Ru-NiFe-P/NF nanocomposite is designed and fabricated by sequentially growing NiFe-P nanosheet arrays, electrodepositing Ru NPs, and subsequently loading borate anion intercalated NiFe-BLDH nanosheets on nickel foam. The introduction of Ru NPs markedly enhances the intrinsic HER activity, making Ru-NiFe-P/NF with a low overpotential of 124 mV at 500 mA cm-2. While the NiFe‑BLDH overlayer creates heterointerfaces that induce charge redistribution, optimize intermediate adsorption, and also slows down the corrosion of Ru, delivering outstanding OER activity (364 mV at 500 mA cm-2). When NiFe-BLDH@Ru-NiFe-P/NF as the anode was assembled into an electrolyzer with Ru-NiFe-P/NF as the cathode, a voltage of only 1.94 V is required to deliver 500 mA cm-2 in alkaline simulated seawater (1 M KOH + 1 M NaCl), which operates continuously for 100 h without significant degradation.
- Open Access
- 3 August 2026
- Published by Elsevier in SSRN Electronic Journal
Synergistic regulation of ternary NiCoFe LDH by borate anion intercalation and Ag nanoparticles for excellent electrocatalytic overall water splitting
Developing efficient, stable bifunctional electrocatalysts is pivotal for large-scale application of overall water splitting (OWS). Herein, a novel integrated self-supported dual-functional electrocatalyst of Ag@NiCoFe-BLDH@NF was constructed by borate anion-intercalated ternary NiCoFe layered double hydroxide (NiCoFe-BLDH) growing on nickel foam (NF) via a facile potentiostatic electrodeposition method, followed by in-situ loading of silver nanoparticles (Ag NPs). It exhibits a flower-like nanostructure assembled by ultrathin nanosheets. Notably, the optimized electrocatalyst achieves ultra-low overpotentials of only 244/73 mV for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) at 100/10 mA cm-2 in 1 M KOH. Moreover, it drives efficient OWS performance with a cell voltage of 1.52 V at 10 mA cm⁻² with stability for 150 h. The outstanding performance arises from synergistic effect of borate anion intercalation, ternary metal LDH ultra-thin nanosheets, and Ag NPs loading. This synergistic strategy combining intercalation regulation and metal nanoparticle loading provides a new route for designing high-performance LDH-based bifunctional electrocatalysts for practical OWS devices.
- 3 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic regulation of ternary NiCoFe LDH by borate anion intercalation and Ag nanoparticles for excellent electrocatalytic overall water splitting
Developing efficient, stable bifunctional electrocatalysts is pivotal for large-scale application of overall water splitting (OWS). Herein, a novel integrated self-supported dual-functional electrocatalyst of Ag@NiCoFe-BLDH@NF was constructed by borate anion-intercalated ternary NiCoFe layered double hydroxide (NiCoFe-BLDH) growing on nickel foam (NF) via a facile potentiostatic electrodeposition method, followed by in-situ loading of silver nanoparticles (Ag NPs). It exhibits a flower-like nanostructure assembled by ultrathin nanosheets. Notably, the optimized electrocatalyst achieves ultra-low overpotentials of only 244/73 mV for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) at 100/10 mA cm-2 in 1 M KOH. Moreover, it drives efficient OWS performance with a cell voltage of 1.52 V at 10 mA cm⁻² with stability for 150 h. The outstanding performance arises from synergistic effect of borate anion intercalation, ternary metal LDH ultra-thin nanosheets, and Ag NPs loading. This synergistic strategy combining intercalation regulation and metal nanoparticle loading provides a new route for designing high-performance LDH-based bifunctional electrocatalysts for practical OWS devices.
- Open Access
- 8 July 2026
- Published by Elsevier in SSRN Electronic Journal
Synergistic effect of borate intercalation and Ru3+ doping NiFe layered double hydroxide for enhanced electrocatalytic overall water splitting
The development of affordable catalysts with excellent bifunctional electrocatalytic activity and durability for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential for sustainable water splitting. Herein, a flower‑like nanostructure (RuNiFe‑BLDH/NF) constructed by ultrathin nanosheets of Ru3+‑doped, borate anions‑intercalated nickel-iron layered double hydroxide was in situ grown on a nickel foam substrate via a facile solvothermal method. A mixed solution of ethylene glycol and water was used as the reaction solvent to effectively not only prevent hydrolysis of Ru3+ but also regulate the nucleation and growth of the LDH. The synergistic effect of Ru3+ doping and borate anions intercalation significantly enhanced both the intrinsic bifunctional catalytic activities and stability of this material. RuNiFe‑BLDH/NF exhibits excellent bifunctional catalytic activity in a 1.0 M KOH alkaline medium. At a current density of 100 mA cm‑2, the HER overpotential is 256 mV, and the OER overpotential is 260 mV. Meanwhile, RuNiFe‑BLDH/NF exhibits excellent stability, showing no significant decay after 24 hours of continuous operation at a current density of 100 mA cm‑2. In simulated seawater (1.0 M KOH + 0.5 M NaCl), it demonstrated excellent water splitting performance and outstanding resistance to chloride ion corrosion. A simple electrolytic cell constructed by using this material as both anode and cathode required only 1.84 V to drive a current density of 100 mA cm‑2, and its catalytic activity increased with rising temperature, meeting the requirements of actual industrial electrolysis conditions. This paper provides a new design approach for developing bifunctional catalytic materials suitable for alkaline freshwater and seawater electrolysis.
- 8 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic effect of borate intercalation and Ru3+ doping NiFe layered double hydroxide for enhanced electrocatalytic overall water splitting
The development of affordable catalysts with excellent bifunctional electrocatalytic activity and durability for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential for sustainable water splitting. Herein, a flower‑like nanostructure (RuNiFe‑BLDH/NF) constructed by ultrathin nanosheets of Ru3+‑doped, borate anions‑intercalated nickel-iron layered double hydroxide was in situ grown on a nickel foam substrate via a facile solvothermal method. A mixed solution of ethylene glycol and water was used as the reaction solvent to effectively not only prevent hydrolysis of Ru3+ but also regulate the nucleation and growth of the LDH. The synergistic effect of Ru3+ doping and borate anions intercalation significantly enhanced both the intrinsic bifunctional catalytic activities and stability of this material. RuNiFe‑BLDH/NF exhibits excellent bifunctional catalytic activity in a 1.0 M KOH alkaline medium. At a current density of 100 mA cm‑2, the HER overpotential is 256 mV, and the OER overpotential is 260 mV. Meanwhile, RuNiFe‑BLDH/NF exhibits excellent stability, showing no significant decay after 24 hours of continuous operation at a current density of 100 mA cm‑2. In simulated seawater (1.0 M KOH + 0.5 M NaCl), it demonstrated excellent water splitting performance and outstanding resistance to chloride ion corrosion. A simple electrolytic cell constructed by using this material as both anode and cathode required only 1.84 V to drive a current density of 100 mA cm‑2, and its catalytic activity increased with rising temperature, meeting the requirements of actual industrial electrolysis conditions. This paper provides a new design approach for developing bifunctional catalytic materials suitable for alkaline freshwater and seawater electrolysis.
- Open Access
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (34) , 15684-15696
Dual-anion regulation engineering enhances chloridion corrosion resistance for long-lasting industrial-scale seawater splitting
The B4O5(OH)42−–CoFe-LDH/SO42−–CoMoO4 nanohybrid, with an amorphous/crystalline interface, enables efficient seawater splitting. Its dual B4O5(OH)42−/SO42− layers suppress Cl− corrosion, facilitating stable industrial-scale seawater splitting.
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (34) , 15684-15696
Open AccessDual-anion regulation engineering enhances chloridion corrosion resistance for long-lasting industrial-scale seawater splitting
The B4O5(OH)42−–CoFe-LDH/SO42−–CoMoO4 nanohybrid, with an amorphous/crystalline interface, enables efficient seawater splitting. Its dual B4O5(OH)42−/SO42− layers suppress Cl− corrosion, facilitating stable industrial-scale seawater splitting.
- 26 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (9) , 4670-4679
A Core–Shell Nanocomposite of Borate Anion-Intercalated NiCoFe-LDH Nanoflakes/Co-BNC Nanorods for Efficient Electrocatalytic Oxygen Evolution
- 26 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (9) , 4670-4679
A Core–Shell Nanocomposite of Borate Anion-Intercalated NiCoFe-LDH Nanoflakes/Co-BNC Nanorods for Efficient Electrocatalytic Oxygen Evolution