Takanori Ichiki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takanori Ichiki has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Hiroaki Takehara
Division of Materials Science, Graduate School of Science and Technology, Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma 630-0192, Nara, Japan
12 shared publications Hiroaki Takehara
Department of Materials Engineering, Graduate School of Engineering, The University of Tokyo
3 shared publicationsVirendra Majarikar
Department of Materials Engineering, School of Engineering, The University of Tokyo
3 shared publicationsHiromi Kuramochi
Department of Materials Engineering, Graduate School of Engineering, The University of Tokyo
2 shared publicationsSylvan Sunny Koyagura
Department of Materials Engineering, School of Engineering, The University of Tokyo
2 shared publications- Tanzilur Rahman
North South University
2 shared publications
Latest Publications
- Open Access
- 5 February 2026
- Published by Oxford University Press (OUP) in PNAS Nexus
- Vol. 5 (2)
Peptide ligase–mediated display: A cell-free platform for tunable selection of affinity peptides
Herein, we report a bead-surface protein display method based on a peptidyl transferase reaction, termed peptide ligase–mediated display (PL display). This technique enables the covalent linkage of genotypic DNA and phenotypic protein variants on beads via a minimal nine–amino acid linker in a fully cell-free system. Using this method, hemagglutinin (HA)-tag sequences introduced at a 0.01% frequency were completely isolated in a single round of selection via fluorescence-activated cell sorting (FACS) against an anti-HA-tag antibody. Furthermore, consensus sequences that bind to the anti-HA-tag antibody were enriched from a random peptide library with a sequence diversity of 1.7 × 106 in two rounds of selection using FACS. This quantitative affinity selection platform using PL display is applicable under diverse conditions, as it is not constrained by cellular physiological properties, fluctuations in gene expression, or the structural and functional limitations of linker proteins involved in genotype–phenotype linkage. These advantages arise from the use of a fully cell-free system and covalent linkage with a minimal linker.
- 5 February 2026
- Published by Oxford University Press (OUP) in PNAS Nexus
- Vol. 5 (2)
Open AccessPeptide ligase–mediated display: A cell-free platform for tunable selection of affinity peptides
Herein, we report a bead-surface protein display method based on a peptidyl transferase reaction, termed peptide ligase–mediated display (PL display). This technique enables the covalent linkage of genotypic DNA and phenotypic protein variants on beads via a minimal nine–amino acid linker in a fully cell-free system. Using this method, hemagglutinin (HA)-tag sequences introduced at a 0.01% frequency were completely isolated in a single round of selection via fluorescence-activated cell sorting (FACS) against an anti-HA-tag antibody. Furthermore, consensus sequences that bind to the anti-HA-tag antibody were enriched from a random peptide library with a sequence diversity of 1.7 × 106 in two rounds of selection using FACS. This quantitative affinity selection platform using PL display is applicable under diverse conditions, as it is not constrained by cellular physiological properties, fluctuations in gene expression, or the structural and functional limitations of linker proteins involved in genotype–phenotype linkage. These advantages arise from the use of a fully cell-free system and covalent linkage with a minimal linker.
- Open Access
- 17 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (47) , 15273-15281
Development of an optical microneedle device embedding sub-nanoliter volumes of boronic acid-based fluorescent hydrogel
Fluorescence-based optical microneedles enable non-consumptive molecular sensing within a small volume (0.79 nL) at the tip, showing an average measurement error of 5.6% for d -glucose concentrations (6.1–37.5 mM).
- 17 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (47) , 15273-15281
Open AccessDevelopment of an optical microneedle device embedding sub-nanoliter volumes of boronic acid-based fluorescent hydrogel
Fluorescence-based optical microneedles enable non-consumptive molecular sensing within a small volume (0.79 nL) at the tip, showing an average measurement error of 5.6% for d -glucose concentrations (6.1–37.5 mM).
- Open Access
- 6 May 2025
- Published by Wiley in Advanced Healthcare Materials
- Vol. 14 (18) , e2405188
Encapsulation of Small Extracellular Vesicles into Selectively Disassemblable Shells of PEGylated Metal‐Phenolic Networks
Small extracellular vesicles (sEVs) are cell‐derived particles used for intercellular communication in living organisms that have gained great interest from researchers for their use as drug carriers and diagnostic agents. However, the isolation and storage of sEVs lead to issues including lipid membrane disruption, protein denaturation, and nucleic acid degradation. Herein, a surface functionalization strategy is reported for encapsulating single sEV into selectively disassemblable protective shells composed of metal‐phenolic networks (MPNs) post‐modified with poly(ethylene glycol) (PEG). Disassemblable MPN shells can be rapidly deposited on sEVs in a one‐step manner and post‐modified with PEG. These coatings enhance the colloidal stability of sEVs and protect them against harsh storage conditions, while the non‐covalent and selectively disassemblable nature of the MPN shell allows recovery after storage without compromising their surface integrity and functionality. It is demonstrated that various triggers, such as pH adjustment, competitive chelation, and redox reactions, can be used to disassemble the MPN shell, thereby offering widely adoptable strategies depending on the target applications. This approach potentially overcomes conventional challenges associated with sEV processing and storage and may contribute to reducing cold‐chain requirements and transportation costs of future sEVs‐based therapeutics and diagnostics.
- 6 May 2025
- Published by Wiley in Advanced Healthcare Materials
- Vol. 14 (18) , e2405188
Open AccessEncapsulation of Small Extracellular Vesicles into Selectively Disassemblable Shells of PEGylated Metal‐Phenolic Networks
Small extracellular vesicles (sEVs) are cell‐derived particles used for intercellular communication in living organisms that have gained great interest from researchers for their use as drug carriers and diagnostic agents. However, the isolation and storage of sEVs lead to issues including lipid membrane disruption, protein denaturation, and nucleic acid degradation. Herein, a surface functionalization strategy is reported for encapsulating single sEV into selectively disassemblable protective shells composed of metal‐phenolic networks (MPNs) post‐modified with poly(ethylene glycol) (PEG). Disassemblable MPN shells can be rapidly deposited on sEVs in a one‐step manner and post‐modified with PEG. These coatings enhance the colloidal stability of sEVs and protect them against harsh storage conditions, while the non‐covalent and selectively disassemblable nature of the MPN shell allows recovery after storage without compromising their surface integrity and functionality. It is demonstrated that various triggers, such as pH adjustment, competitive chelation, and redox reactions, can be used to disassemble the MPN shell, thereby offering widely adoptable strategies depending on the target applications. This approach potentially overcomes conventional challenges associated with sEV processing and storage and may contribute to reducing cold‐chain requirements and transportation costs of future sEVs‐based therapeutics and diagnostics.
- Open Access
- 25 June 2024
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 37 (2) , 239-244
Effects of Solvents on the Preparation of PLLA/PEDOT:PSS Conductive Polymer Alloy Films
Polymer alloys, formed by blending biodegradable and conductive polymers, offer properties challenging to achieve with a single material, thus garnering significant attention. Among these, Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS), a biocompatible conductive polymer composed of PEDOT doped with PSS, has been extensively researched due to its electrochemical, thermal, and oxidative stability, paving the way for practical applications. In this study, we delve into the preparation process of polymer alloy films comprising PEDOT:PSS and poly(L-lactic acid) (PLLA), a biodegradable polymer. We explore the compatibility of immiscible polymer blends by mixing a PLLA solution in either 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) or dimethyl sulfoxide (DMSO) with a PEDOT:PSS aqueous dispersion. Using a solvent mixture of HFIP and water resulted in separate phase domains of PLLA and PEDOT:PSS, failing to form a cohesive film. However, employing a DMSO and water solvent mixture yielded films with uniformly dispersed PLLA and PEDOT:PSS phases at a microscopic level. We conducted numerical thermodynamic simulations based on Hansen Solubility Parameters (HSP) to elucidate the experimental results and examine the impact of solubility changes during solvent evaporation on polymer precipitation. Our findings demonstrate the feasibility of fabricating alloy films with uniformly dispersed constituent polymer phases by selecting solvents with comparable solubilities for both polymers.
- 25 June 2024
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 37 (2) , 239-244
Open AccessEffects of Solvents on the Preparation of PLLA/PEDOT:PSS Conductive Polymer Alloy Films
Polymer alloys, formed by blending biodegradable and conductive polymers, offer properties challenging to achieve with a single material, thus garnering significant attention. Among these, Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS), a biocompatible conductive polymer composed of PEDOT doped with PSS, has been extensively researched due to its electrochemical, thermal, and oxidative stability, paving the way for practical applications. In this study, we delve into the preparation process of polymer alloy films comprising PEDOT:PSS and poly(L-lactic acid) (PLLA), a biodegradable polymer. We explore the compatibility of immiscible polymer blends by mixing a PLLA solution in either 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) or dimethyl sulfoxide (DMSO) with a PEDOT:PSS aqueous dispersion. Using a solvent mixture of HFIP and water resulted in separate phase domains of PLLA and PEDOT:PSS, failing to form a cohesive film. However, employing a DMSO and water solvent mixture yielded films with uniformly dispersed PLLA and PEDOT:PSS phases at a microscopic level. We conducted numerical thermodynamic simulations based on Hansen Solubility Parameters (HSP) to elucidate the experimental results and examine the impact of solubility changes during solvent evaporation on polymer precipitation. Our findings demonstrate the feasibility of fabricating alloy films with uniformly dispersed constituent polymer phases by selecting solvents with comparable solubilities for both polymers.
- Open Access
- 24 October 2023
- Published by AIP Publishing in APL Machine Learning
- Vol. 1 (4)
Analysis of Brownian motion trajectories of non-spherical nanoparticles using deep learning
As nanoparticles are being put to practical use as useful materials in the medical, pharmaceutical, and industrial fields, the importance of technologies that can evaluate not only nanoparticle populations of homogeneous size and density but also those of rich diversity is increasing. Nano-tracking analysis (NTA) has been commercialized and widely used as a method to measure individual nanoparticles in liquids and evaluate their size distribution by analyzing Brownian motion. We have combined deep learning (DL) for NTA to extract more property information and explored a methodology to achieve an evaluation for individual particles to understand their diversity. Practical NTA always assumes spherical shape when quantifying particle size using the Stokes–Einstein equation, but it is not possible to verify whether the measured particles are truly spherical. We developed a DL model that predicts the shape of nanoparticles using time series trajectory data of BM obtained from NTA measurements to address this problem. As a result, we were able to discriminate with ∼80% accuracy between spherical and rod-shaped gold nanoparticles of different shapes, which are evaluated to have nearly equal particle size without any discrimination by conventional NTA. Furthermore, we demonstrated that the mixing ratio of spherical and rod-shaped nanoparticles can be quantitatively estimated from measured data of mixed samples of nanoparticles. This result suggests that it is possible to evaluate particle shape by applying DL analysis to NTA measurements, which was previously considered impossible, and opens the way to further value-added NTA.
- 24 October 2023
- Published by AIP Publishing in APL Machine Learning
- Vol. 1 (4)
Open AccessAnalysis of Brownian motion trajectories of non-spherical nanoparticles using deep learning
As nanoparticles are being put to practical use as useful materials in the medical, pharmaceutical, and industrial fields, the importance of technologies that can evaluate not only nanoparticle populations of homogeneous size and density but also those of rich diversity is increasing. Nano-tracking analysis (NTA) has been commercialized and widely used as a method to measure individual nanoparticles in liquids and evaluate their size distribution by analyzing Brownian motion. We have combined deep learning (DL) for NTA to extract more property information and explored a methodology to achieve an evaluation for individual particles to understand their diversity. Practical NTA always assumes spherical shape when quantifying particle size using the Stokes–Einstein equation, but it is not possible to verify whether the measured particles are truly spherical. We developed a DL model that predicts the shape of nanoparticles using time series trajectory data of BM obtained from NTA measurements to address this problem. As a result, we were able to discriminate with ∼80% accuracy between spherical and rod-shaped gold nanoparticles of different shapes, which are evaluated to have nearly equal particle size without any discrimination by conventional NTA. Furthermore, we demonstrated that the mixing ratio of spherical and rod-shaped nanoparticles can be quantitatively estimated from measured data of mixed samples of nanoparticles. This result suggests that it is possible to evaluate particle shape by applying DL analysis to NTA measurements, which was previously considered impossible, and opens the way to further value-added NTA.
- 1 October 2022
- Published by IOP Publishing in Applied Physics Express
- Vol. 15 (10) , 106503
Experimental and numerical studies of deformation of truncated-cone-shaped poly(L-lactic acid) microneedle during insertion
To explore minimally invasive and hypodermic access for in-body sensing, polymer microneedles of 2 mm in length have been studied. Sharper tips are desirable to reduce pain, however, the mechanical strength of such tips is low. To design polymer microneedles that do not plastically deform, the deformation behavior of poly(L-lactic acid) microneedles with different tip diameters was investigated by simulation and experiment. It was found that the plastic deformation of the tip may increase the insertion force. The minimum insertion force was approximately 200 mN for microneedles with a tip diameter of 80 μm, which were inserted without plastic deformation.
- 1 October 2022
- Published by IOP Publishing in Applied Physics Express
- Vol. 15 (10) , 106503
Experimental and numerical studies of deformation of truncated-cone-shaped poly(L-lactic acid) microneedle during insertion
To explore minimally invasive and hypodermic access for in-body sensing, polymer microneedles of 2 mm in length have been studied. Sharper tips are desirable to reduce pain, however, the mechanical strength of such tips is low. To design polymer microneedles that do not plastically deform, the deformation behavior of poly(L-lactic acid) microneedles with different tip diameters was investigated by simulation and experiment. It was found that the plastic deformation of the tip may increase the insertion force. The minimum insertion force was approximately 200 mN for microneedles with a tip diameter of 80 μm, which were inserted without plastic deformation.
- Open Access
- 14 March 2022
- Published by Wiley in Journal of Extracellular Vesicles
- Vol. 11 (3) , e12205
Distinguishing functional exosomes and other extracellular vesicles as a nucleic acid cargo by the anion‐exchange method
The development of a new large‐scale purification protocol is required for research on the reliable bioactivity and drug discovery of extracellular vesicles (EVs). To address this issue, herein, we propose an effective method for preparing high‐performance exosomes (EXOs) by using an anion‐exchange method. Cytotoxic T‐lymphocyte (CTL) EVs from 4 L of culture supernatant through a 220 nm cut‐off filter are divided into two populations at a deproteinization rate of over 99.97%, which are eluted at low (0.15 M–0.3 M) and high (0.3 M–0.5 M) NaCl concentrations (approximately 2 × 1012 and 1.5 × 1012 particles, respectively) through the anion‐exchange column chromatography. The former are abundant in EXO proteins, including late endosome‐associated proteins and rab‐family and integrin‐family proteins, and functional micro (mi) RNAs, and have bioactivity for preventing tumour metastasis by depleting mesenchymal cell populations in the primary tumour lesions. By contrast, the latter is microvesicle (MV)‐like particles including DNA, core histone and ribosomal proteins, and GC‐rich miRNAs with unknown function, and are easily phagocytosed by mannose receptor+ Kupffer cells. Thus, the anion‐exchange method is suitable for the large‐scale separation of bioactive EXOs and MV‐like EVs as a cargo for dangerous nucleic acids at high‐purity.
- 14 March 2022
- Published by Wiley in Journal of Extracellular Vesicles
- Vol. 11 (3) , e12205
Open AccessDistinguishing functional exosomes and other extracellular vesicles as a nucleic acid cargo by the anion‐exchange method
The development of a new large‐scale purification protocol is required for research on the reliable bioactivity and drug discovery of extracellular vesicles (EVs). To address this issue, herein, we propose an effective method for preparing high‐performance exosomes (EXOs) by using an anion‐exchange method. Cytotoxic T‐lymphocyte (CTL) EVs from 4 L of culture supernatant through a 220 nm cut‐off filter are divided into two populations at a deproteinization rate of over 99.97%, which are eluted at low (0.15 M–0.3 M) and high (0.3 M–0.5 M) NaCl concentrations (approximately 2 × 1012 and 1.5 × 1012 particles, respectively) through the anion‐exchange column chromatography. The former are abundant in EXO proteins, including late endosome‐associated proteins and rab‐family and integrin‐family proteins, and functional micro (mi) RNAs, and have bioactivity for preventing tumour metastasis by depleting mesenchymal cell populations in the primary tumour lesions. By contrast, the latter is microvesicle (MV)‐like particles including DNA, core histone and ribosomal proteins, and GC‐rich miRNAs with unknown function, and are easily phagocytosed by mannose receptor+ Kupffer cells. Thus, the anion‐exchange method is suitable for the large‐scale separation of bioactive EXOs and MV‐like EVs as a cargo for dangerous nucleic acids at high‐purity.
- 11 June 2021
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 34 (1) , 1-5
Experimental Evaluation and Modeling of Adsorption Phenomena of Nanoliposomes on Poly(dimethylsiloxane) Surfaces
Nanoparticles, such as exosomes or liposomes, have been widely studied using poly(dimethylsiloxane) (PDMS) microchannels. The interaction between nanoparticles and solid surfaces is an important subject for basic and applied research on nanoparticles, but there have been few reports on the use of microchannels for this purpose. Micro-scale systems serve as a useful platform for adsorption analysis because of their large surface-to-volume ratio. In this study, we attempted to develop a platform to study the adsorption phenomena of nanoparticles on solid surfaces using a microchannel, in which a model that analyzes dynamic (i.e., non-equilibrium) adsorption was used. This model allowed quantitative analysis of nanoliposome adsorption onto the surface of a PDMS microchannel.
- 11 June 2021
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 34 (1) , 1-5
Experimental Evaluation and Modeling of Adsorption Phenomena of Nanoliposomes on Poly(dimethylsiloxane) Surfaces
Nanoparticles, such as exosomes or liposomes, have been widely studied using poly(dimethylsiloxane) (PDMS) microchannels. The interaction between nanoparticles and solid surfaces is an important subject for basic and applied research on nanoparticles, but there have been few reports on the use of microchannels for this purpose. Micro-scale systems serve as a useful platform for adsorption analysis because of their large surface-to-volume ratio. In this study, we attempted to develop a platform to study the adsorption phenomena of nanoparticles on solid surfaces using a microchannel, in which a model that analyzes dynamic (i.e., non-equilibrium) adsorption was used. This model allowed quantitative analysis of nanoliposome adsorption onto the surface of a PDMS microchannel.