LPLuis Eduardo Marques Padovan

Luis Eduardo Marques Padovan

*This is an algorithmically generated author record based on publicly available information.

Luis Eduardo Marques Padovan has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Immediate full-arch rehabilitation of atrophic maxilla using extra-long implants with bicortical anchorage in the canine pillars

    by Farid Jamil Silva de Arruda, Andrew Sotirios Melenikiotis, Paola Rebelatto Alcântara, Geninho Thomé, Ivete Aparecida de Mattias Sartori, Luis Eduardo Marques Padovan

    Rehabilitation of atrophic maxilla can be challenging, being used bone augmentation and modified implant designs. Despite many studies on more complex techniques, such as zygomatic implants. There are practically no case reports in literature using extra-long implants with bicortical anchorage in canine pillars for immediate rehabilitation in atrophic maxillae. This clinical report aims to describe a case in which extra-long implants were placed with bicortical anchorage in canine pillars region to allow full-arch immediate rehabilitation of an atrophic maxilla. A 60-year-old male patient, in good general health, was referred to a Dental College (Curitiba, Brazil) with complaints about his upper partial dentures. Patient´s rehabilitation was initiated with lower arch to achieve a full-mouth balanced occlusion. Platform-switched Morse taper connection implants were placed in regions #34, #36, #44, and #46 to support single and multi-unit fixed prostheses. For rehabilitation of maxillary arch, an all-on-four rehabilitation was planned. Guided surgery was performed to place four platform-switched Morse taper connection implants bicortically anchored in the canine pillar´s region, the two distal extra-long implants. Patient was followed for 16 months and presented good clinical and radiographic outcomes, including adequate peri-implant bone level maintenance and soft tissue health. No biological or mechanical complications were reported within this period. Therefore, use of extra-long implants bicortical anchored in canine pillars seems to be a suitable treatment option for rehabilitation of atrophic maxilla, enhancing possibility of obtaining sufficient primary stability, more even distribution of load on the remaining bone, possibility of immediate rehabilitation and maintaining peri-implant tissue health.

  • Open Access

    Biomechanical Behaviour of Quad Zygoma Technique Using a Smooth Body Zygomatic Implant and Angled Abutments - An In Vitro Study

    by Clifford Alejandro Pedro Pablo Allen Lengua, Denia Jhovana Vanessa Sierra Delgado, Henry Alexander Aldana Avila, Erton Massamitsu Miyasawa, Luis Eduardo Marques Padovan

    Introduction: The quad zygoma technique is an alternative for patients who do not have enough bone to place zygomatic implants associated with conventional implants. The association of the quad zygoma technique with smooth zygomatic implants and angled abutments is an option, and understanding the mechanical behaviour of this combination is essential. This study aims to analyse the reliability of this technique by investigating the biomechanical behaviour of the rehabilitation of a total edentulous maxilla using the quad zygoma technique with 3.5 mm and 3.75 mm smooth body zygomatic implant diameters associated with 52° and 60° abutments. Materials and Methods: The finite element analysis (FEA) method was used to evaluate biomechanical behaviour. Three-dimensional models of maxillae, zygomatic bone, zygomatic implant, abutment, screw and the superstructure were used to assemble three models with different implant diameters and mini conical abutment angulations. The amount and distribution of stress in surrounding bone tissue, implant, abutment and abutment screws were evaluated. Results: The peak stresses in the bone, implant, abutment and abutment screw were below the resistance limits of the materials. Higher stress was found in the system (implant, abutment and abutment screw) associated with the 60° MiniConical Abutment. Similar stress patterns were found in the two placement approaches (sinus slot and exteriorised). Discussion: The present FEA revealed that the quad zygoma technique is biomechanically suitable and reliable regardless of the implant diameter, abutment angulation and implant placement protocol. In addition, this study can help clinicians understand stress distribution and give them more confidence in using the evaluated implant system and quad zygoma approach.


  • Full‐arch prostheses supported by implants with different macrostructures: A multicenter randomized controlled trial

    by Ana Carolina Monachini Marcantonio, Guilherme José Pimentel Lopes de Oliveira, Paulo Afonso Tassi, João Paulo Lavagnoli Manfrinato, Bruno Segnini, Raphael Ferreira de Souza Bezerra Araújo, Larissa Carvalho Trojan, Flávia Noemy Gasparini Kiatake Fontão, Ivete Aparecida de Mattias Sartori, Elisa Mattias Sartori, et al.

    Objectives: This study evaluates the clinical performance of implants with hydrophilic surface and two different macrostructures: cylindrical with perforating triangular threads (CT) and cylindrical‐tapered with the association of square and condensing and perforating triangular threads (TST).Materials and methods: This was a multicenter split‐mouth, simple‐blinded, randomized, and controlled trial. Thirty patients with edentulous mandible received two CT and two TST implants. Primary stability was determined by insertion torque and resonance frequency analysis (RFA). Implants were loaded with full fixed‐arch prostheses within 24 h after insertion. Clinical parameters (visible plaque index, marginal bleeding index; bleeding on probing; probing depth; and clinical attachment level) and the RFA were assessed at 2, 6, 12, and 24 months after implant loading. Marginal bone level changes were measured by comparison of standardized radiographs taken on the day of implant placement and 6, 12, and 24 months thereafter.Results: Twenty‐eight patients completed the 2‐year follow‐up. The survival rates were 99.16% for CT implants and 100% for TST implants. One CT implant was lost until the 2 months follow‐up. No significant differences were found between the two implant types for marginal bone level changes (CT 0.34 [0.24; 0.55 mm]; 0.33 [0.18; 0.55 mm]; 0.41 [0.12; 0.7 mm] vs TST 0.36 [0.14; 0.74 mm]; 0.33 [0.23; 0.63 mm]; 0.30 [0.20; 0.64 mm] at 6, 12, and 24 months, respectively) and other clinical parameters.Conclusion: The macrostructure of the implants had no influence on survival rate, primary and secondary stability, marginal bone level changes, and peri‐implant clinical parameters outcomes. Both implants can be predictably used for immediate loading of full‐arch mandibular prostheses.

  • Open Access

    Unveiling the Therapeutic Potential of Systemic Ozone on Skin Wound Repair: Clinical, Histological, and Immunohistochemical Study in Rats

    by Jânderson de Medeiros Cardoso, Edilson Ervolino, Erton Massamitsu Miyasawa, Leticia Helena Theodoro, Luis Eduardo Marques Padovan, Estevão Lopes Pereira, Rafael Scaf de Molon, Valdir Gouveia Garcia

    This study sought to examine the effects of systemic ozone (O3) treatment on the healing of skin wounds induced on the dorsal surface of Wistar rats. The skin wounds were created using a 10 mm round punch following the sagittal medial plane in 72 rats. Then, the animals were randomly assigned to four groups, each receiving the following treatments: group C, which did not undergo treatment with the O3/O2 mixture; group OZ0.3, administered the O3/O2 mixture at a dose of 0.3 mg/kg; group OZ0.7, given the O3/O2 mixture at a dose of 0.7 mg/kg; and group OZ1.0, provided with the O3/O2 mixture at a dose of 1.0 mg/kg. Six animals from each group were euthanized at 7, 14, and 21 days postoperatively. Clinical, histological, histometric, and immunohistochemical (IHC) analyses were accomplished. Data from clinical and histometric assessments revealed that OZ0.7 and OZ1.0 demonstrated more favorable healing, with greater wound contraction observed in the OZ1.0 group at 14 and 21 days. Histologically, the OZ1.0 group exhibited aspects consistent with an accelerated tissue repair process. IHC analysis revealed greater vascular endothelial growth factor (VEGF) immunostaining in the OZ0.7 (7 days) and OZ1.0 (7 and 14 days) groups compared to the C group. Expression of transforming growth factor beta‐1 was significantly increased in the OZ0.7 (14 days) and OZ1.0 (7 and 14 days) groups compared to the C group. In conclusion, our data suggest that systemic use of O3 enhanced tissue repair in cutaneous wounds in a dose‐dependent manner, with concentrations of 1.0 mg/kg providing the most beneficial effects. Furthermore, the results of this study implicate the use of O3 for the treatment of skin wounds aiming at improving the healing process over time. Our findings suggest the use of O3 as a viable alternative to enhance wound healing and repair.


  • Open Access

    Effects of systemic ozone administration on the fresh extraction sockets healing: a histomorphometric and immunohistochemical study in rats

    by Erton Massamitsu Miyasawa, Edilson Ervolino, Jânderson de Medeiros Cardoso, Leticia Helena Theodoro, Glauco Rodrigues Carmo Silveira, Rafael Scaf de Molon, Liran Levin, Valdir Gouveia Garcia, Luis Eduardo Marques Padovan

    Studies have highlighted numerous benefits of ozone therapy in the field of medicine and dentistry, including its antimicrobial efficacy against various pathogenic microorganisms, its ability to modulate the immune system effectively, reduce inflammation, prevent hypoxia, and support tissue regeneration. However, its effects on dental extraction healing remain to be elucidated.


  • Comparison of sinusitis rate after sinus lift procedure and zygomatic implant surgery: a meta-analysis

    by Roberta Schroder Rocha, Camila Pereira Vianna, Larissa Carvalho Trojan, Luis Eduardo Marques Padovan, Maria Cristina Godoy Leme dos Santos

    Purpose To evaluate and compare the reported sinusitis occurrence after the sinus lift procedure and zygomatic implant placement. Methods This meta-analysis has been registered at PROSPERO. Studies were searched on six databases. Two authors screened titles and abstracts and fully analyzed the studies against the inclusion and exclusion criteria. The RoB 2.0 and the ROBINS-I tools were used to assess the quality and risk of bias of the included studies. The random-effects model was used for the meta-analysis. The prevalence of sinusitis was calculated based on the total of patients. Subgroup analysis was performed by sinus lift or zygomatic implant surgery technique. Results The search identified 2419 references. After applying the inclusion criteria, 18 sinus lift and 9 zygomatic implant placement studies were considered eligible. The pooled prevalence of sinusitis after sinus lift procedure was 1.11% (95% CI 0.30–2.28). The prevalence after zygomatic implant placement was 3.76% (95% CI 0.12–10.29). In the subgroup analysis, the lateral window approach showed a prevalence of sinusitis of 1.35% (95% CI 0.34–2.8), the transcrestal technique of 0.00% (95% CI 0.00–3.18), and the SALSA technique of 1.20% (95% CI 0.00–5.10). Regarding the techniques for zygomatic implant placement, the sinus slot technique showed a prevalence of 21.62% (95% CI 9.62–36.52) and the intrasinus technique of 4.36% (95% CI 0.33–11.08), and the prevalence after the extrasinus technique was 0.00% (95% CI 0.00–1.22). Conclusion The sinusitis occurrence rate was higher after zygomatic implant placement than after sinus lift procedure and this occurrence was different depending on the used technique.


  • Open Access

    Biomechanical comparison of four treatment models for the totally edentulous maxilla: a finite element analysis

    by Erton Massamitsu Miyasawa, Felipe Carvalho de Macêdo, Jorge Valenga Filho, Larissa Carvalho Trojan, Leandro Eduardo Klüppel, Luis Eduardo Marques Padovan

    The aim of this study is to evaluate by finite element analysis different techniques of totally edentulous maxilla rehabilitation, considering implants, bone tissue, metallic infra-structure, and prosthetic abutments characteristics, by means of a three-dimensional model. Stress distribution on bone tissue, implants, and abutments was analyzed with four configurations (six implants axially installed, all-on-four technique, M-4 technique, and four conventional implants with two zygomatic implants). Greater tension on bone tissue were found around distal implants, in all treatment groups, but not exceeding resistance limits of cortical bone. Von Mises stress was higher on the distal region of distal implants of all-on-four and M-4 techniques. Higher stress concentration was seen on angled abutments of zygomatic implants. The highest values of minimal compression stresses were concentrated on peri implant-bone tissue, especially in the model of All-on-4. Therefore, the present finite element analysis revealed that the four configurations of treatment (six implants axially installed, all-on-four technique, M-4 technique, and four conventional implants with two zygomatic implants) for the totally edentulous maxilla are feasible and safe, from a biomechanical point of view.


  • Factors influencing implant and prosthesis survival in zygomatic implant-supported fixed rehabilitation: a retrospective study

    by Luis Eduardo Marques Padovan, Dalton Suzuki, Leandro Eduardo Kluppel, Camila Pereira Vianna, Waleska Caldas, Larissa Carvalho Trojan

    Background The aim of this retrospective study was to evaluate mid-term implant and prosthesis survival in patients with edentulous atrophic maxillae submitted to zygomatic implant-supported fixed rehabilitation and to identify possible related risk factors. Methods Data were collected from records of patients with edentulous atrophic maxillae, in good general health and who were rehabilitated by means of acrylic resin full-arch screw-retained prosthesis supported by at least one zygomatic implant, between the years of 2006–2017. Implant and prosthesis survival rates were calculated. The association between implant and prosthesis loss and quantitative and qualitative variables of interest was verified with t tests and Fisher’s exact tests, respectively. For the significant variables in the latter, odds ratio and 95% confidence intervals were additionally calculated. Results The sample comprised 66 patients in whom 171 zygomatic implants were placed to support maxillary screw-retained full-arch prostheses. Implant and prosthesis survival rates of 94.15% and 92.4%, respectively, were observed in a mean of 3.6 years of follow-up (up to 11.7 years). Implant loss was 4.33 more likely to occur when adverse events were recorded after the procedure of implant placement (P = 0.026) and 10.31 more likely to occur in implants that had their prosthesis repaired during follow-up visits (P = 0.004). Prosthesis loss was 22.00 times more likely to occur when implants were previously lost (P < 0.001). All prostheses that were considered as failures (i.e. were replaced) had been previously submitted to laboratory repair at some point during follow-up. Conclusions Zygomatic implant rehabilitation demonstrated to be a reliable method with good mid-term results. The occurrence of post-surgical adverse events and need for laboratory repair of the prosthesis were found to be significant risk factors for implant loss. Previous implant loss was significantly associated with prosthesis loss. These risk factors may be prevented by means of detailed planning of the rehabilitation to be carried out, including post-operative care of the patients, so that treatment success using zygomatic implants can be achieved.


  • Open Access

    Full arch rehabilitation in patients with atrophic upper jaws with zygomatic implants: a systematic review

    by Ana Helena Pereira Gracher, Marcos Boaventura de Moura, Patrícia da Silva Peres, Geninho Thomé, Luís Eduardo Marques Padovan, Larissa Carvalho Trojan

    Background: The main objective of this systematic review was to present the outcomes of the treatment with zygomatic implants (ZIs) in the rehabilitations of atrophic upper jaw. Findings: An electronic database search in PubMed, along with a manual search, taking into account language and study period, was performed by two observers; any type of clinical trial and series that included the use of ZIs was used. In the search strategy, the following search terms were used: zygom* AND dental (Implant OR implants) AND edentulous NOT (biomechanic* OR finite element) NOT cadaver. The search was limited to English language, full text, and humans. Literature reviews and clinical case reports were not considered. Forty-two articles published between March 2003 and April 2019 were included in this analysis. The cases of 1247 patients were recovered; these patients received 2919 ZIs. Fifty-two ZIs were removed during the follow-up time. The survival rate of these implants was 98.22%, with a minimum follow-up of 1 month and a maximum of 228 months. Different surgical techniques were used to place ZIs; however, the intrasinusal technique was the most used (23 studies). Post-surgical sinusitis was the most common complication reported in the studies (39 cases). Conclusions: Based on this review, ZIs were commonly used for rehabilitation of patients with atrophic upper jaw. The survival rates presented were high, and the surgical technique is dependent on the professional experience and the local anatomy. However, it needed additional clinical evidence on bone resorption, esthetic outcomes, and physiological characteristics.


  • Simplificação da técnica para reabilitação de maxila atrófica com implantes zigomáticos com interface cônica interna e carregamento imediato: relato de caso

    by Geninho Thomé, Jean Uhlendorf, Carolina Accorsi Cartelli, Sérgio Rocha Bernardes, Larissa Carvalho Trojan, Marcos Boaventura de Moura, Luis Eduardo Marques Padovan

    A reabilitação de maxilas atróficas com implantes dentários é sempre um desafio, visto que o uso de enxertos ósseos é quase sempre necessário para estabilização dos implantes. Os implantes zigomáticos têm sido utilizados como uma opção viável ao uso de procedimentos de enxertia óssea anterior à cirurgia. A interface cônica interna apresenta gap reduzido entre implante e componente protético, mostrando resultados biológicos e estéticos satisfatórios a longo prazo. Este artigo tem como objetivo relatar a reabilitação protética imediata de uma maxila atrófica com implantes convencionais e zigomáticos com interface cônica interna como opção ao uso de enxertos ósseos prévios. Paciente com 47 anos de idade, do sexo masculino, apresentava maxila atrófica e usava uma prótese total superior. O paciente foi reabilitado com quatro implantes convencionais na região anterior e dois implantes zigomáticos cônicos internos instalados nos ossos zigomáticos. Os torques de instalação dos implantes ≥ 60 N.cm proporcionaram estabilidade primária ideal e uma prótese (protocolo) foi instalada imediatamente utilizando a técnica do assentamento passivo. O caso clínico apresentado mostrou que, após 1 ano, resultados precisos e estéticos são possíveis de alcançar com a instalação de implantes zigomáticos combinados com implantes convencionais para reabilitação de maxilas atróficas de forma imediata e sem utilização de enxerto ósseos prévios.